Search

A small posterior tibial slope (PTS) is generally recommended in posterior stabilized (PS) total knee arthroplasty (TKA). An unwanted anterior tibial slope (ATS), which can affect postoperative results, may be created in PS TKA because of the inaccuracy of surgical instruments and techniques, as well as high inter-patient variability. We compared mid-term clinical and radiographic results of PS TKAs with ATS and PTS performed on paired knees using the same prosthesis. One-hundred-twenty-four patients who underwent TKAs with ATS and PTS on paired knees using ATTUNE® posterior-stabilized prostheses were retrospectively reviewed after a minimum follow-up period of 5 years. The mean follow-up period was 5.4 years. The Knee Society Knee and Function scores, Western Ontario and McMaster Universities Osteoarthritis Index, Feller and Kujalar scores, and range of motion (ROM) were evaluated. The preferred TKA out of ATS and PTS was also investigated. The hip-knee-ankle angle (HKA), component positions, tibial slope, posterior femoral offset (PFO), Insall–Salvati ratio (ISR), and knee sagittal angle were measured by radiography. There were no significant differences in the clinical results, including ROM, between TKAs with ATS and PTS preoperatively and at the last follow-up. Regarding patient preference, 58 patients (46.8%) were satisfied with bilateral knees, 30 (24.2%) preferred knees with ATS, and 36 (29%) preferred knees with PTS. There was no significant difference in the rate of preference between TKAs with ATS and PTS (p=0.539). Except for the postoperative tibial slope (-1.8° vs. 2.5°, p

Orthodontic treatment of posterior bite collapse due to early loss of molars and the consequent drift of adjacent teeth is complicated. When the posterior bite collapse occurs in patients with facial asymmetry, both transverse and vertical compensation are necessary for camouflage orthodontic treatment. In such cases, posterior maxillary segmental osteotomy (PMSO) can be an effective alternative procedure that simplifies the orthodontic treatment and shows long-term stability through dental compensation within the alveolar bone housing. This case report aimed to describe the orthodontic treatment of maxillary occlusal plane canting caused by severely extruded maxillary teeth in a patient with skeletal facial asymmetry that was corrected with PMSO along with protraction of the lower second molar to replace the space of the extracted first molar. The treatment duration was 18 months, and stable results were obtained after 2 years of retention.

BACKGROUND Human leukocyte antigen class I (HLA-I) molecules play important roles in regulating immune responses. Loss or reduction of HLA-I expression has been shown to be associated with prognosis in several cancers. Regulatory T-cells (Tregs) also play critical functions in immune response regulation. Evaluation of HLA-I expression status by the EMR8-5 antibody and its clinical impact in breast cancer have not been well studied, and its relationship with Tregs remains unclear. METHODS We evaluated HLA-I expression and Treg infiltration by immunohistochemistry in 465 surgically resected breast cancer samples. We examined the correlation between HLA-I expression and Treg infiltration and clinicopathologic characteristics and survival analyses were performed. RESULTS Total loss of HLA-I expression was found in 84 breast cancer samples (18.1%). Univariate survival analysis revealed that loss of HLA-I expression was significantly associated with worse disease-specific survival (DSS) (p = .029). HLA-I was not an independent prognostic factor in the entire patient group, but it was an adverse independent prognostic factor for DSS in patients with advanced disease (stage II-IV) (p = .031). Treg numbers were significantly higher in the intratumoral stroma of HLA-I-positive tumors than in HLA-I-negative tumors (median 6.3 cells/high power field vs 2.1 cells/high power field, p < .001). However, Tregs were not an independent prognostic factor in our cohort. CONCLUSIONS Our findings suggest that the loss of HLA-I expression is associated with poor prognosis in breast cancer patients, highlighting the role of HLA-I alterations in immune evasion mechanisms of breast cancer. HLA-I could be a promising marker that enables the application of more effective and precise immunotherapies for patients with advanced breast cancer.

We present a case of 55-year-old man who complained of dyspnea and sputum for a month. He was an ex-smoker with a history of prostate cancer and pulmonary tuberculosis. Chest radiographs revealed bilateral pleural effusions of a small to moderate amount. Pigtail catheters were inserted for drainage. The pleural fluid consisted of large clusters and tightly cohesive groups of malignant cells, which however could not be ascribed to prostate cancer with certainty. We performed immunocytochemical panel studies to determine the origin of cancer metastasis. The immunostaining results were positive for prostate-specific antigen, alpha-methylacyl-coenzyme A racemase, and Nkx 3.1, consistent with prostate cancer. Pleural effusion associated with prostate cancer is rare. To our knowledge, this is the first case report in Korea to describe cytologic features of malignant pleural effusion associated with prostate cancer.

In this paper, a mathematical model of regionalization based on graph theory to investigate the patterns induced by movements of livestock vehicles in cities under outbreaks of highly pathogenic avian influenza (HPAI) is proposed. We then compare the results of simulation from the regionalization model to actual HPAI outbreaks in 2016/2017 to evaluate the validity of the model. Specifically, we (1) configured a complex network structure with analytic tools and properties in graph theory to abstract the paths among farms and livestock facilities; (2) employed statistical methods to estimate the possibility of propagation between two clusters; (3) applied the developed method to an actual HPAI outbreak in Korea in 2016 and conducted a simulation to determine if the proposed modeling for regionalization is an effective prediction measure. The clustered regions proposed by the simulation correctly reflected the regional clustering of actual cases, while simultaneously contain the cities exposed to potential damage when separated. Based on these findings, we conclude that our proposed regionalization model is suitable for making policy judgments to establish a preemptive biosecurity system.

From July 2013 to November 2014, this research was conducted to secure baseline data to find long-term preventive measures against epidemics from the analysis of home range and movement characteristics of raccoon dogs, which are known as carriers of zoonosis. Researchers conducted a follow-up study with 12 raccoon dogs, each attached with a Global Positioning System mobile transmitter. Analysis of home range used the minimum convex polygon (MCP) method and kernel density estimation (KDE) with accumulating data of time-based locations. Except for three animals that showed unique behavior, the researchers analyzed nine animals and calculated their average home range. As a result, average home range was 0.48 ± 0.35 km2 (MCP method), and KDE result analysis was verified as 0.65 ± 0.66 km2 (95%), 0.31 ± 0.35 km2 (75%), and 0.23 ± 0.28 km2 (50%). Based on the MCP method, acted in range of minimum 0.07 km2 and maximum 1.08 km2, and the core habitat, KDE 50% level showed activity range in 0.02 km2 to 0.37 km2. Three individuals of unique behavior were classified into two types. Two individuals moved 10–20 km and settled at a place different from the existing habitat, and one individual kept moving without a regular sphere of influence. Generally, raccoon dogs are not considered to move if they secure their area of influence; animals in urban areas have a wider area of influence than those living in areas with a rich source of food such as forest and agricultural land.

Objective: To evaluate the characteristic transverse dental compensations in patients with facial asymmetry and mandibular prognathism and to compare features of dental compensations between two types of mandibular asymmetry using 3-dimensional (3D) cone-beam computed tomography (CBCT). Materials and Methods: Seventy-eight adult patients with skeletal Class I (control group; n = 33; 19 men and 14 women) or skeletal Class III with facial asymmetry (experimental group; n = 45; 23 men and 22 women) were included. The experimental group was subdivided into two groups according to the type of mandibular asymmetry: translation type (T-type; n = 20) and roll type (R-type; n = 19). CBCT images were acquired before orthodontic treatment and 3D analyses were performed. Results: The transverse dental distance was significantly different between the two groups only at the palatal root apex of the maxillary first molar (P < .05). In the experimental group, the first molar axes were compensated significantly on both arches except the maxillary nondeviated side. The vertical molar heights were different between the two groups only on the maxillary arch (P < .001). The R-type showed greater mandibular ramal length difference and menton deviation than the T-type (P < .001). In the R-type, transverse compensation of the maxillary first molars was more obvious than with the T-type, which resulted in canting in the maxillary occlusal plane. Conclusions: Mandibular asymmetry with prognathism showed a characteristic transverse dental compensation pattern. The mandibular asymmetry type influenced the amount and direction of molar compensation on the maxillary arch.

Background: Due to morphologic similarities between undifferentiated sarcoma (US) and dedifferentiated liposarcoma (DDLPS), some portions of US could be identified as DDLPS. In this study, we applied adipocyte-related antibodies in order to discriminate possible cases of DDLPS from US. Materials and methods: A total of 46 cases, previously diagnosed as US, were examined. Immunohistochemistry for MDM2, CDK4, calreticulin, FABP4, and stathmin were performed. Histological findings were reviewed and clinical data was analyzed retrospectively. Results: MDM2, CDK4, calreticulin, FABP4, and stathmin were positive in 17 (37.0%), 14 (30.4%), 3 (6.5%), 1 (2.2%), and 12 (26.1%) of the total 46 cases, respectively. MDM2/CDK4 positive cases showed more frequent positivity for calreticulin/FABP4/stathmin. Survival analysis, based on staining pattern, revealed a significantly better survival in the group where either MDM2 and CDK4 were positive and at least one of calreticulin, FABP4, or stathmin staining were positive. Conclusions: We conclude that when either MDM2-positive or CDK4-positive cases show any other positive results for calreticulin, FABP4, or stathmin, they have a significantly better survival and the possibility of DDLPS should be considered. Additional use of calreticulin, FABP4, or stathmin immunohistochemistry helps us to narrow the pool for further studies such as molecular analysis for a definite diagnosis.

Systemic inflammatory markers derived from peripheral blood cell, such as the neutrophil-lymphocyte ratio (NLR), derived neutrophil-lymphocyte ratio (dNLR), platelet-lymphocyte ratio (PLR) and lymphocyte-monocyte ratio (LMR), have been demonstrated as prognostic markers in several types of malignancy. Here, we investigated and compared the association between systemic inflammatory markers and survival and developed a prognostic nomogram in breast cancer patients. We reviewed the clinical and pathological records of 661 patients diagnosed with invasive breast carcinoma between 1993 and 2011. The NLR, dNLR, PLR and LMR in the immediate preoperative period were assessed. We analyzed the relationship between these inflammatory markers and clinicopathologic variables, disease-specific survival (DSS), and disease-free survival (DFS) in patients. A nomogram was developed to predict 3- and 5-year DSS for breast cancer. In the univariate analysis, high NLR, dNLR, PLR and low LMR were all significantly associated with poor DSS and DFS. In the multivariate analysis, only the PLR (HR 3.226, 95% CI 1.768-5.885 for DSS and HR 1.824, 95% CI 1.824-6.321 for DFS) was still identified as an independent predictor of outcomes. A subgroup analysis revealed that the PLR was the sole independent marker predicting poor DSS in patients with lymph node metastasis (HR 2.294, 95% CI 1.102-4.777) and with luminal subtype (HR 4.039, 95% CI 1.905-8.562). The proposed nomogram, which includes the PLR, shows good accuracy in predicting DSS with a concordance index of 0.82. PLR is an indicator of systemic inflammation as a part of the host immune response. As an independent prognostic factor, an elevated preoperative PLR is superior to the NLR, dNLR, and LMR in predicting clinical outcomes in patients with breast cancer. Moreover, the nomogram incorporating the PLR could accurately predict individualized survival probability in breast cancer.

A 20-year-old woman visited the office complaining of a gummy smile and lip protrusion. She was diagnosed with vertical maxillary excess without open bite and skeletal Class II hyperdivergent pattern. She refused the surgical-orthodontic treatment option, although she wanted to correct the gummy smile and retruded chin. Differential intrusion of anterior and posterior teeth in both arches was necessary to maximize the skeletal treatment effects. In the maxilla, one palatal temporary anchorage device (TAD), an archwire with an accentuated curve of Spee, and a transpalatal arch were applied. In the mandible, an archwire with a reverse curve of Spee and two vertically positioned TADs were used. These simple mechanics contributed to the effective intrusion of the total upper and lower arches, correction of the gummy smile, and mandibular counterclockwise rotation, offering an alternative to orthognathic surgery for this patient.

Both an unreinforced Al₂O₃/Al matrix and a α-Al₂O₃ particulate reinforced composite have been produced by the oxidation of an Al surface doped with NaOH in the absence of any other dopant. Fabrication of the matrix was initiated by the formation of NaAlO₂, which provides a favorable surface structure for the matrix formation by breaking the protective Al₂O₃ layer on Al. During the matrix growth, the external surface of the growth front was covered with a very thin sodium-rich oxide. A cyclic formation process of the sodium-rich oxide on the growth surface was proposed for the sodium-induced directed metal oxidation process. This process involves dissolution of the sodium-rich oxide, motion of Na to the growth front, and re-formation of the oxide on the surface. Near-net-shape composites were fabricated by infiltrating an Al₂O₃/Al matrix into a α-Al₂O₃ particulate preform, without growth barrier materials. The infiltration distance increased almost linearly in the NaOH-doped preform.

More than 80% of cancer patients experience cancer pain. Among them, more than 50% experience moderate to severe pain. To control cancer pain, a variety of methods have been used, including medications and nerve blocks. In some patients, however, it is impossible to perform nerve blocks due to caner metastasis into the epidural space, while in other patients, opioid dose escalation is impossible due to opioid side effects; thus, cancer pain management is difficult. Scrambler therapy is a novel approach for pain control that uses EKG-like pads, which are applied above and below the site of pain. Scrambler therapy synthesizes 16 different types of nerve action potentials that provide "non-pain" information via cutaneous nerves. The advantages of this treatment are that it is non-invasive and safe and has no significant side effects. In this case series, we report the treatment results of using scrambler therapy in three cancer patients with intractable pain.

Objective The protein GS28 (28-kDa Golgi SNARE protein) has been described as a SNARE (Soluble N-ethylmaleimide-sensitive factor attachment protein receptors) protein family member that plays a critical role in mammalian ER-Golgi or intra-Golgi vesicle transport. Little is known about the possible roles of GS28 in pathological conditions. The purpose of this study was to evaluate GS28 expression in cervical cancer tissues and explore its correlation with clinicopathological features and prognosis. Methods We investigated GS28 expression in 177 cervical cancer tissues by using immunohistochemistry and evaluated the correlation of GS28 expression with clinicopathological features, the expression of p53 and Bcl-2, and prognosis of cervical cancer patients. Immunoblotting was performed using six freshly frozen cervical cancer tissues to confirm the subcellular localization of GS28. Results Immunoreactivity of GS28 was observed in both nuclear and cytoplasmic compartments of cervical cancer cells. High nuclear expression of GS28 was associated with advanced tumor stages (P = 0.036) and negative expression of p53 (P = 0.036). In multivariate analyses, patients with high nuclear expression of GS28 showed significantly worse overall survival (OS) (hazard ratio = 3.785, P = 0.003) and progression-free survival (PFS) (hazard ratio = 3.019, P = 0.008), compared to those with low or no nuclear expression. It was also a reliable, independent prognostic marker in subgroups of patients with early stage T1 and negative lymph node metastasis in OS (P = 0.008 and 0.019, respectively). The nuclear expression of GS28 was confirmed by immunoblotting. Conclusion High nuclear expression of GS28 is associated with poor prognosis in early-stage cervical cancer patients. GS28 might be a novel prognostic marker and a potential therapeutic target in cervical cancer treatment.

Background: Dexmedetomidine has a sedative analgesic property without respiratory depression. This study evaluated the efficacy of dexmedetomidine as an appropriate sedative drug for monitored anesthesia care (MAC) in outpatients undergoing cataract surgery on both eyes compared with combination of propofol and alfentanil. Methods : Thirty-one eligible patients were randomly divided into two groups on the first operation day. Dexmedetomidine was administered in group D at 0.6 μg/kg/h, and propofol and alfentanil was infused concomitantly in group P at a rate of 2 mg/kg/h and 20 μg/kg/h, respectively. Sedation was titrated at Ramsay sedation score 3. Iowa satisfaction with anesthesia scale (ISAS) of the patients was evaluated postoperatively. Systolic blood pressure (SBP), heart rate (HR), respiration rate (RR), and peripheral oxygen saturation (SpO2) were recorded throughout the surgery. For the second operation, the group assignments were exchanged. Results: Postoperative ISAS was 50.3 (6.2) in group D and 42.7 (8.7) in group P, which was statistically significant (P < 0.001). SBP was significantly lower in group D compared with group P from the beginning of the operation. HR, RR, and SpO2 were comparable between the two groups. There were 8 cases (25.8%) of hypertension in group P, and 1 case (3.2%) in group D (P < 0.05). In contrast, 1 case (3.2%) of hypotension and 1 case (3.2%) of bradycardia occurred in group D. Conclusions: Compared with the combined use of propofol and alfentanil, dexmedetomidine could be used appropriately for MAC in cataract surgery with better satisfaction from the patients and a more stable cardiovascular state. (Korean J Anesthesiol 2011; 61: 453-459)

We propose a pixel structure and its driving scheme for stereoscopic 3-dimensional (3D) active-matrix organic light emitting diode (AMOLED) displays. The proposed pixel structure and its driving scheme have merits that are longer emission and programming time than simultaneous emission scheme by successive cross emission of left and right images. Moreover, it can reduce flicker by reducing interval between emission times. For 3D AMOLED displays of 40-inch full high definition TV (1920×1080), the emission current error rate of the proposed pixel structure is from −0.961% to 1.013% when the threshold voltage variation of driving TFT varies from −0.8 V to 0.8 V, and that the error is less than 2% when the VDD-IR drop voltage becomes 2.0 V.

Objective To evaluate the short-term changes in masticatory muscle activity and mandibular movement patterns after orthognathic surgery in skeletal Class III patients with facial asymmetry. Methods Twenty-seven skeletal Class III adult patients were divided into two groups based on the degree of facial asymmetry: the experimental group (n = 17 [11 male and 6 female]; menton deviation ≥ 4 mm) and control group (n = 10 [4 male and 6 female]; menton deviation < 1.6 mm). Cephalography, electromyography (EMG) for the anterior temporalis (TA) and masseter muscles (MM), and mandibular movement (range of motion [ROM] and average chewing pattern [ACP]) were evaluated before (T0) and 7 to 8 months (T1) after the surgery. Results There were no significant postoperative changes in the EMG potentials of the TA and MM in both groups, except in the anterior cotton roll biting test, in which the masticatory muscle activity had changed into an MM-dominant pattern postoperatively in both groups. In the experimental group, the amount of maximum opening, protrusion, and lateral excursion to the non-deviated side were significantly decreased. The turning point tended to be shorter and significantly moved medially during chewing in the non-deviated side in the experimental group. Conclusions In skeletal Class III patients with facial asymmetry, the EMG activity characteristics recovered to presurgical levels within 7 to 8 months after the surgery. Correction of the asymmetry caused limitation in jaw movement in terms of both ROM and ACP on the non-deviated side.

Purpose Trastuzumab is an effective treatment for human epidermal growth factor receptor 2 (HER2)-amplified breast cancers. We sought to develop a simple protocol for HER2 image analysis of breast cancer specimens. Materials and methods In a preliminary test, we found that at least 1000 tumor cells need to be examined in the most strongly stained areas. Next, we evaluated the clinical usefulness of this established protocol of image analysis in 555 breast cancer patients. Results of the HER2 immunohistochemical (IHC) staining were compared between manual scoring and image analysis. Results The HER2 IHC results obtained by the image analysis method correlated well with those obtained by the manual scoring method (Cohen's kappa=0.830). Using the HER2 silver in situ hybridization (SISH) results as a gold standard, sensitivity values were 72.1% for manual scoring and 74.0% for image analysis; specificity values were 96.2% for manual scoring and 94.7% for image analysis; and accuracy values were 91.7% for manual scoring and 90.8% for image analysis. McNemar's test was applied to the results, and there were no statistically significant differences in sensitivity and specificity between the positive (p=0.688) and negative (p=0.118) SISH groups. Conclusion HER2 image analysis results were similar to those obtained via the manual scoring method, indicating that the use of image analysis can reduce assessment time and effort. We suggest that image analysis-based evaluation of 1000 tumor cells in the most strongly IHC-stained area, regardless of stroma content, is sufficient for determining HER2 expression levels in breast cancer specimens.

The bi-modal breakdown processes can well explain the lifetime model in grooved gate oxide with rounded local structure. We have clarified for the first time that the gate oxide reliability is strongly dependant on the tunneling characteristics in the rounded channel of the center and the N+ junction edge corners

Carbon–carbon composites are often used in high-temperature applications due to their high specific modulus, high specific strength, excellent heat resistance, high thermal shock resistance and chemical inertness. In this paper, the strength of carbon/carbon brake disks for automotive applications were tested and evaluated. The laminate material properties of carbon/carbon composites were evaluated via tension, compression and shear tests. The strengths of mechanically fastened composite joints for brake disks were tested and their failure criterion was established based on the maximum stress theory. Additionally, torsion tests of carbon/carbon brake disks were performed and the results were compared with those from a finite element analysis.

Polyaluminocarbosilane was synthesized by direct reaction of polydimethylsilane with aluminum(Ⅲ)-acetylacetonate in the presence of zeolite catalyst. A fraction of higher molecular weight polycarbosilane was formed due to the binding of aluminium acetylacetonate radicals with the polycarbosilane backbone. Small amount of Si-O-Si bond was observed in the as-prepared polyaluminocarbosilane as the result. Polyaluminocarbosilane fiber was obtained through a melt spinning and was pyrolyzed and sintered into SiC fiber from 1200~2000℃ under a controlled atmosphere. The nucleation and growth of β-SiC grains between 1400 - 1600℃ are accompanied with nano pores formation and residual carbon generation. Above 1800℃, SiC fiber could be sintered to give a fully crystallized β-SiC with some α-SiC.

Polycarbosilane is the most typical polymeric precursor for SiC ceramic. In this study, liquid type polycarbosilane was synthesized from polydimethylsilane in the presence of solid acid catalyst at 350oC. The molecular weights of the polycarbosilane were ranged between 350 and 530. Synthesized polycarbosilane was characterized with 29Si Solid NMR, FT-IR and GPC analysis. The synthesized polycarbosilane can be used as a good organometallic precursor for SiC coating via chemical vapor deposition or spin coating.

Four kinds of raw C/C composites with a density between 1.25~1.66g/㎤ were used in order to investigate the effect of the initial porosity of C/C composites on mechanical properties of liquid silicon infiltrated C/SiC composites. The microstructure observation, image analysis and flexural strength test of the composites were performed. The density and microstructural changes with the variation of the initial porosity was discussed in the terms of the infiltration behavior of liquid silicon and the reaction between liquid silicon and matrix carbon.

Graphite is widely used in electronic industry due to its excellent electrical and thermal properties. However, graphite starts to oxidize around 350°C which seriously degrades its properties. SiC coating can be applied to graphite to improve its high temperature oxidation resistance. In this research, SiC coating on graphite was made via preceramic polymer using a polymethylphenylsilane. 20% of polymethylphenylsilane in hexane solution was coated onto graphite by dip coating method. After coating, thermal oxidation was carried out at 200°C for crosslink of the preceramic polymer and the sample were pyrolysized at 1200°C under nitrogen to convert the preceramic polymer to SiC film. The phase formation, stiochiometry and microstructure of the SiC coating after pyrolysis were investigated using low angle XRD and FESEM etc. Oxidation resistance up to 600°C was evaluated.

Recently, there has been a lot of research in vanadium redox flow battery (VRFB) which is used as a large scale energy storage system and power supplier. Especially, graphite electrodes play an important role because they do directly act as electrochemical reaction in cell. In this study, commercial graphite felts were prepared by heat treatment in the range of 400 to 600 °C, controlling the condition of heat treatment such as air purity, heating processing time. As a result, the surface morphology and oxide of electrode were observed by SEM and XPS. Moreover, electrochemical evaluations such as CV (Cyclic Voltammetry) and impedance were performed in three electrode cell at room temperature, in which the kinetic properties of electrode were different with the condition of surface modification. Furthermore, small VRFB full cells constructed with the graphite felt showed the properties of charge and discharge profile corresponding to the above analysis and electrochemical test. Therefore, we will introduce the effect of heat treatment on the graphite felt electrode and its correlation in electrochemical reaction in more detail.

Burn-in effectiveness relies on the capability to accelerate any latent defects to failure. However the margin between operating voltages and any additional voltage that may be applied during burn-in is shrinking because the intrinsic reliability margins to voltage are shrinking. Consequently, elevated voltage are not only uncovering latent defects, but are impacting the expected lifetime of the intrinsic material properties of semiconductor device. Conventionally, when designers decide the stress voltage, limitations such as acceleration parameters should be taken into consideration. In this study, in order to help circuit and process designers who work early design stage, we propose method of determining the Burn-in stress voltage without acceleration parameters. For obtaining the optimized stress voltage, we investigated the history of Burn-in stress voltage over past ten years as shown in fig.8. We found the increase ratio of stress voltage which is to meet field ELFR (ppm) target as shown in fig 9.

The paper presents layout dependency of PMOS I off degradation during off-state stress, which is induced by inverter leakage currents (I off ) have been increased by electron trapping in PMOSFET. Extensive test result represents time dependence of PMOS hump is based on the STI edge trap. To conclude, we can expect that hot temperature bake evaluation causing partial recovery of I off leakage is the reason for that trap location is a nitride liner of STI edge rather than edge gate oxide.

An exact lifetime extrapolation models of ZrO2-Al2O3-ZrO2 (ZAZ) stack capacitor with metal-insulator-metal (MIM) structure was studied in this paper. From the extensive long-term test result (~ 7.5 months) it was found that the power-law model is suitable as a exact lifetime extrapolation model for ZAZ dielectric reliability.