Search

In this study, the octenylsuccinylated taro starches (OSTS) with different degree of substitution (DS, from 0.009 to 0.032) were prepared and their structural properties such as granule size, wettability and morphology were studied. The purpose of this work was to elucidate the OSTS with different DS using as particle stabilizers for Pickering emulsions, and the effect of DS on the stability, droplet size, microstructure and rheological properties of OSTS-stabilized emulsions were investigated. Octenylsuccinic anhydride (OSA) modification had slight effects on the morphology or granule size of taro starch, but markedly increased the contact angle from 25.4° to 70.1°. Octenylsuccinylation significantly improved the emulsifying capacity of taro starch granules, and thus OSTS-stabilized emulsions formed at higher DS exhibited better stability. Droplet size distribution results and microscopic observations revealed that OSTS-emulsion prepared at DS of 0.032 had the smallest droplet size and most uniform distribution compared with the other emulsions. The rheological results indicated that both OSTS-emulsions (DS, from 0.009 to 0.032) showed shear-thinning behavior as a non-Newtonian fluid, and the viscosities of emulsions were progressively improved with the increase of DS. Moreover, the G ′ and G ″ values of OSTS-emulsions increased with increasing DS, reflecting the enhanced viscoelastic properties and exhibiting an improved rigidity of the emulsions. The above results suggested that higher-DS favored the formation of superior OSTS-emulsions, and thus OSTS with a high DS (DS ≥ 0.018) can be used for preparing stable Pickering emulsions.

Water-in-oil (W/O) emulsions with a discontinuous aqueous phase dispersed in a continuous camellia oil phase were prepared by using tea polyphenol palmitate (Tp-palmitate) particle as effective stabilizers and their properties were characterized by droplet size, slip melting point (SMP), stability, microstructure and rheology. The d(4,3) and d(3,2) decreased from 7.96 μm to 4.67 μm and from 5.98 μm to 3.07 μm, respectively, and the SMP rose from 33.73 °C to 38.60 °C when the Tp-palmitate concentration increased from 1.0% to 2.5% (m/v). The storage stability, freeze/thaw stability and thermal stability significantly enhanced and the droplets aggregation progressively increased with the increasing of Tp-palmitate concentration. The liquid camellia oil was transformed into solid-like viscoelastic emulsion gels with a SMP of 38.6 °C when using 2.5% Tp-palmitate as particle stabilizers. This study provides a promising method for production of edible gel-like W/O emulsions using polyphenol-lipid complexes to potentially replace solid fats.

The features of designing, creating, and operating a solar photoelectric power station (PhEPS) for a 10 kW high-altitude observatory Maidanak (Uzbekistan Academy of Sciences) introduced into operation in 2016 to secure continuous and efficient operation and remotely control astronomical telescopes are presented in the paper. Problems regarding a highly efficient modification and features for controlling a Zeiss-1000 astronomical telescope in order to significantly decrease its power consumption are also studied.

Crude oil degumming by phospholipid removal is crucial to guarantee oil quality. Phospholipase degumming could produce green vegetable oil by reducing energy consumption and protecting the environment. To develop a novel phospholipase for oil degumming, we cloned the Serratia marcescens outer membrane phospholipase A gene (OM-PLA1) and expressed its 33 KDa protein in engineered Escherichia coli BL21(DE3). OM-PLA1 activity reached 18.9 U mL-1 with the induction of 0.6 mM isopropyl β-D-1-thiogalactopyranoside for 4 h. The optimum temperature and pH were 50°C and 7.5, respectively. Mg2+, Ca2+, Co2+, and Mn2+ at 0.1 mM L-1 significantly increased OM-PLA1 activity. The kinetic equations of OM-PLA1 and Lecitase Ultra were y = 13.7x+0.74 (Km = 18.53 mM, Vmax = 1.35 mM min-1) and y = 24.42x+0.58 (Km = 42.1 mM, Vmax = 1.72 mM min-1), respectively. The phosphorus content decreased from 22.6 to 9.3 mg kg-1 with the addition of 15 units of free recombinant OM-PLA1 into 150 g of crude rapeseed oil. OM-PLA1 has the close degumming efficiency with Lecitase Ultra. The S. marcescens outer membrane phospholipase gene (OM-PLA1) possessed higher substrate affinity and catalytic efficiency than Lecitase Ultra. This study provides an alternative approach to achieve crude vegetable oil degumming with enzymatic technology.

Enzymatic degumming is an effective approach to produce nutritional, safe, and healthy refined oil. However, the high cost and low efficiency of phospholipase limit the application of enzymatic degumming. In this study, an 879 bp outer membrane phospholipase A (A1) (OM-PLA1) gene encoding 292 amino acid residues was isolated from the genome of Serratia marcescens. The recombinant OM-PLA1 profile of appropriately 33 KDa was expressed by the engineered Pichia pastoris GS115. The OM-PLA1 activity was 21.2 U/mL with the induction of 1 mM methanol for 72 h. The expression efficiencies of OM-PLA1 were 0.29 U/mL/h and 1.06 U/mL/OD600. A complex of magnetic graphene oxide (MGO) and OM-PLA1 (MGO-OM-PLA1) was prepared by immobilizing OM-PLA1 with graphene oxide-based Fe3O4 nanoparticles by cross-linking with glutaraldehyde. The content of phosphorus decreased to 5.1 mg/kg rapeseed oil from 55.6 mg/kg rapeseed oil with 0.02% MGO-OM-PLA1 (w/w) at 50°C for 4 h. MGO-OM-PLA1 retained 51.7% of the initial activity after 13 times of continuous recycling for the enzymatic degumming of rapeseed oil. This study provided an effective approach for the enzymatic degumming of crude vegetable oil by developing a novel phospholipase and improving the degumming technology.

Membrane technology has unique advantages over centrifugal equipment and has been widely applied. In this work, the hydrophobic ceramic membranes were used to remove phospholipid micelles from crude rapeseed oil, and their fouling mechanism, control, cleaning and influence on oil quality were investigated. The results of four different treatments showed that enzyme-membrane binding was the most effective degumming method. The flux performance can meet the needs of small-scale oil production. Concentration experimental results showed that the fouling mechanism was a combination of intermediate blockage and cake. Although increasing pressure, temperature, concentration, flow rate, and pore size could all reduce available area and increase resistance, the effects of TMP and pore size are the most significant in these factors. Non-cleaning resistance was very small under all conditions, and increasing transmembrane pressure and pore size promoted non-cleaning resistance. Increasing temperature and cross-flow velocity significantly reduced the resistance of cleanable pollution. In terms of membrane fouling control, the critical and threshold transmembrane pressures of the large-pore membrane were lower than those of the small-pore membrane and decreased with increasing concentration. Fouled membranes can be cleaned and restored by oil without phospholipid micelles, and the flux recovery rate of the membranes can exceed 85% after 10 reuses. The membranes removed phospholipids and water and were beneficial for decreasing free fatty acids and peroxide values. Therefore, the enzyme-membrane binding can be considered for gradual use in the production of small-scale oil.

This prospective cohort study was conducted to assess the duration of daytime napping and its effect combined with night sleep deprivation on the risk of developing high HOMA-IR (homeostasis model assessment of insulin resistance) index and disadvantageous changes in glycosylated hemoglobin (HbA1c) levels. A total of 5845 diabetes-free subjects (2736 women and 3109 men), 30 to 65 years of age, were targeted for this cohort study since 2008. Multiple adjusted Cox regression models were performed to evaluate the single and joint effects of daytime napping on the risk of an elevated HbA1c level and high HOMA-IR index. After an average of 4.5 years of follow-up, >30 minutes of daytime napping was significantly associated with an increased risk of an elevated HbA1c level (>6.5%) in men and women (all P trend < 0.05). Hazard ratios (HRs) for an HbA1c level between 5.7% and 6.4% were also significant in the entire cohort and women, but nonsignificant in men. HRs (95% confidence interval, CIs) for the high HOMA-IR index in the entire cohort, men, and women were 1.33 (1.10–1.62), 1.46 (1.08–1.98), and 1.47 (1.12–1.91), respectively. The combination of sleep deprivation with no naps or >30 minutes napping and the combination of no sleep deprivation with >30 minutes daytime napping were all associated with an HbA1c level >6.5% (HR = 2.08, 95% CI = 1.24–3.51; HR = 4.00, 95% CI = 2.03–7.90; and HR = 2.05, 95% CI = 1.29–3.27, respectively). No sleep deprivation combined with >30 minutes daytime napping correlated with a high risk of an HbA1c level between 5.7% and 6.4% and high HOMA-IR index (HR = 2.12, 95% CI = 1.48–3.02; and HR = 1.35, 95% CI = 1.10–1.65, respectively). Daytime napping >30 minutes was associated with a high risk of an elevated HbA1c level and high HOMA-IR index. No sleep deprivation combined with napping >30 minutes carries a risk of abnormal glucose metabolism. Sleep deprivation combined with brief daytime napping

A two-dimensional axisymmetric finite element model is developed to analyze the transient thermal and mechanical behaviors of the Resistance Spot Welding (RSW) process using commercial software ANSYS. Firstly a direct-coupled electrical-thermal Finite Element Analysis (FEA) is performed to analyze the transient thermal characteristics of the RSW process. Then based on the thermal results a sequential coupled thermo-elastic-plastic analysis is conducted to determine the mechanical features of the RSW process. The thermal history of the whole process and the temperature distribution of the weldment are obtained through the analysis. The mechanical features, including the distributions of the contact pressure at both the faying surface and the electrode-workpiece interface, the stress and strain distributions in the weldment and their changes during the RSW process, the deformation of the weldment and the electrode displacement are also calculated.