Search

While a majority of protein crystal structures are solved by using molecular replacement (MR), it is limited by the available homologous models with sufficient sequence identity. Another popular method is multi-wavelength anomalous diffraction (MAD) that uses Se-Met and synchrotron radiations. However, proteins containing Se-Met are sometimes difficult to obtain and/or crystallize. Consequently, other heavy-atom derivatives are still used in crystal structure determination, while single isomorphous replacement (SIR) and single wavelength anomalous diffraction (SAD) are more popular than conventional multiple isomorphous replacement (MIR). Here, some recent cases of structure determination in which Hg serves as the only heavy-atom type are discussed. For Hg-derivatives, data collection does not need absorption spectrum scanning and it can be carried out using an in-house X-ray source. Derivatization with Hg can start directly by soaking the native crystals in Hg-containing solutions, or use a specific mutant in the active site of an enzyme if it lacks intrinsic free cysteine residues. The rapid advance of bioinformatics and protein engineering has made this strategy of cysteine-dependent Hg-phasing by MIR, SIR and SAD an effective method of choice besides MR and MAD for crystal structure determination.

The ever-increasing production and use of polyvinyl alcohol (PVA) threaten our environment. Yet PVA can be assimilated by microbes in two steps: oxidation and cleavage. Here we report novel a/b-hydrolase structures of oxidized PVA hydrolase (OPH) from two known PVA-degrading organisms, Sphingopyxis sp. 113P3 and Pseudomonas sp. VM15C, including complexes with substrate analogues, acetylacetone and caprylate. The active site is covered by a lid-like beta-ribbon. Unlike other esterase and amidase, OPH is unique in cleaving the C = C bond of beta-diketone, although it has a catalytic triad similar to that of most alpha/beta-hydrolases. Analysis of the crystal structures suggests a double-oxyanion-hole mechanism, previously only found in thiolase cleaving beta-ketoacyl-CoA. Three mutations in the lid region showed enhanced activity, with potential in industrial applications.

Pullulanase is a debranching enzyme that specifically hydrolyzes the α-1,6 glycosidic linkage of α-glucans, and has wide industrial applications. Here, we report structural and functional studies of a new thermostable pullulanase from Anoxybacillus sp. LM18-11 (PulA). Based on the hydrolysis products, PulA was classified as a type I pullulanase. It showed maximum activity at 60°C and pH 6.0. Kinetic study showed that the specific activity and Km for pullulan of PulA are 750 U mg(-1) and 16.4 μmol L(-1), respectively. PulA has a half-life of 48 h at 60°C. The remarkable thermostability makes PulA valuable for industrial usage. To further investigate the mechanism of the enzyme, we solved the crystal structures of PulA and its complexes with maltotriose and maltotetraose at 1.75-2.22 A resolution. The PulA structure comprises four domains (N1, N2, A, and C). A is the catalytic domain, in which three conserved catalytic residues were identified (D413, E442, and D526). Two molecules of oligosaccharides were seen in the catalytic A domain in a parallel binding mode. Interestingly, another two oligosaccharides molecules were found between the N1 domain and the loop between the third β-strand and the third α-helix in the A domain. Based on sequence alignment and the ligand binding pattern, the N1 domain is identified as a new type of carbohydrate-binding motif and classified to the CBM68 family. The structure solved here is the first structure of pullulanase which has carbohydrate bound to the N1 domain.

We have obtained the structure of the bacterial diterpene synthase, tuberculosinol/iso-tuberculosinol synthase (Rv3378c) from Mycobacterium tuberculosis , a target for anti-infective therapies that block virulence factor formation. This phosphatase adopts the same fold as found in the Z- or cis-prenyltransferases. We also obtained structures containing the tuberculosinyl diphosphate substrate together with one bisphosphonate inhibitor-bound structure. These structures together with the results of site-directed mutagenesis suggest an unusual mechanism of action involving two Tyr residues. Given the similarity in local and global structure between Rv3378c and the M. tuberculosis cis-decaprenyl diphosphate synthase (DPPS; Rv2361c), the possibility exists for the development of inhibitors that target not only virulence but also cell wall biosynthesis, based in part on the structures reported here.

β-Glucanases have been utilized widely in industry to treat various carbohydrate-containing materials. Recently, the Podospora anserina β-glucanase 131A (PaGluc131A) was identified and classified to a new glycoside hydrolases GH131 family. It shows exo-β-1,3/exo-β-1,6 and endo-β-1,4 glucanase activities with a broad substrate specificity for laminarin, curdlan, pachyman, lichenan, pustulan, and cellulosic derivatives. Here we report the crystal structures of the PaGluc131A catalytic domain with or without ligand (cellotriose) at 1.8Å resolution. The cellotriose was clearly observed to occupy the +1 to +3 subsites in substrate binding cleft. The broadened substrate binding groove may explain the diverse substrate specificity. Based on our crystal structures, the GH131 family enzyme is likely to carry out the hydrolysis through an inverting catalytic mechanism, in which E99 and E139 are supposed to serve as the general base and general acid.

The bi-functional nuclease AtBFN2 from Arabidopsis thaliana (EC 3.1.30.1) depends on zinc ion for cleaving single stranded DNA and RNA to yield 5′-nucleotides. It is a glycoprotein that participates in plant development and differentiation. The crystal structure of AtBFN2 shows a bound sulfate ion in the active site, at the center of the tri-nuclear cluster of zinc ions. The protein folds into a mostly α-helical structure with five short β-strands and contains four disulfide bonds. The zinc ions are coordinated to the side chains of three Asp and five His residues, two backbone atoms of Trp1, the sulfate ion, and a water molecule. An adenine base is bound adjacent to the active site and stacks with Tyr59. The core sugar residues attached to the three N-glycosylation sites of Asn91, Asn110 and Asn184 are also observed. By comparison with the nuclease P1 structure (PDB ID: 1AK0), the AtBFN2-sulfate-adenine complex model suggests a similar catalytic mechanism, in which the reaction starts with in-line attack at the phosphate by a zinc-activated water molecule.

Xylanases are capable of decomposing xylans, the major components in plant cell wall, and releasing the constituent sugars for further applications. Because xylanase is widely used in various manufacturing processes, high specific activity, and thermostability are desirable. Here, the wild-type and mutant (E146A and E251A) catalytic domain of xylanase from Thermoanaerobacterium saccharolyticum JW/SL-YS485 (TsXylA) were expressed in Escherichia coli and purified subsequently. The recombinant protein showed optimal temperature and pH of 75 degrees C and 6.5, respectively, and it remained fully active even after heat treatment at 75 degrees C for 1 h. Furthermore, the crystal structures of apo-form wild-type TsXylA and the xylobiose-, xylotriose-, and xylotetraose-bound E146A and E251A mutants were solved by X-ray diffraction to high resolution (1.32-1.66 angstrom). The protein forms a classic (/)8 folding of typical GH10 xylanases. The ligands in substrate-binding groove as well as the interactions between sugars and active-site residues were clearly elucidated by analyzing the complex structures. According to the structural analyses, TsXylA utilizes a double displacement catalytic machinery to carry out the enzymatic reactions. In conclusion, TsXylA is effective under industrially favored conditions, and our findings provide fundamental knowledge which may contribute to further enhancement of the enzyme performance through molecular engineering. Proteins 2013; 81:1256-1265. (c) 2013 Wiley Periodicals, Inc.

D-psicose 3-epimerase (DPEase) is demonstrated to be useful in the bioproduction of D-psicose, a rare hexose sugar, from D-fructose, found plenty in nature. Clostridium cellulolyticum H10 has recently been identified as a DPEase that can epimerize D-fructose to yield D-psicose with a much higher conversion rate when compared with the conventionally used DTEase. In this study, the crystal structure of the C. cellulolyticum DPEase was determined. The enzyme assembles into a tetramer and each subunit shows a (β/α)(8) TIM barrel fold with a Mn(2+) metal ion in the active site. Additional crystal structures of the enzyme in complex with substrates/products (D-psicose, D-fructose, D-tagatose and D-sorbose) were also determined. From the complex structures of C. cellulolyticum DPEase with D-psicose and D-fructose, the enzyme has much more interactions with D-psicose than D-fructose by forming more hydrogen bonds between the substrate and the active site residues. Accordingly, based on these ketohexose-bound complex structures, a C3-O3 proton-exchange mechanism for the conversion between D-psicose and D-fructose is proposed here. These results provide a clear idea for the deprotonation/protonation roles of E150 and E244 in catalysis.

The NADH-dependent (R)-carbonyl reductase fromCandida parapsilosis(RCR) catalyzes the asymmetric reduction of 2-hydroxyacetophenone (HAP) to produce (R)-1-phenyl-1,2-ethanediol [(R)-PED], which is used as a versatile building block for the synthesis of pharmaceuticals and fine chemicals. To gain insight into the catalytic mechanism, the structures of complexes of RCR with ligands, including the coenzyme, are important. Here, the recombinant RCR protein was expressed and purified inEscherichia coliand was crystallized in the presence of NAD+. The crystals, which belonged to the orthorhombic space groupP212121, with unit-cell parametersa= 85.64,b= 106.11,c= 145.55 Å, were obtained by the sitting-drop vapour-diffusion method and diffracted to 2.15 Å resolution. Initial model building indicates that RCR forms a homotetramer, consistent with previous reports of medium-chain-type alcohol dehydrogenases.

Mannopeptimycin, a potent drug lead, has superior activity against difficult-to-treat multidrug-resistant Gram-positive pathogens such as methicillin-resistant Staphylococcus aureus (MRSA). (2S,3S)-beta-Methylphenylalanine is a residue in the cyclic hexapeptide core of mannopeptimycin, but the synthesis of this residue is far from clear. We report here on the reaction order and the stereochemical course of reaction in the formation of (2S,3S)-beta-methylphenylalanine. The reaction is executed by the enzymes MppJ and TyrB, an S-adenosyl methionine (SAM)-dependent methyltransferase and an (S)-aromatic-amino-acid aminotransferase, respectively. Phenylpyruvic acid is methylated by MppJ at its benzylic position at the expense of one equivalent of SAM. The resulting beta-methyl phenylpyruvic acid is then converted to (2S,3S)-beta-methylphenylalanine by TyrB. MppJ was further determined to be regioselective and stereoselective in its catalysis of the formation of (3S)-beta-methylphenylpyruvic acid. The binding constant (K(D)) of MppJ versus SAM is 26 microM. The kinetic constants with respect to k(cat Ppy) and K(M Ppy), and k(cat SAM) and K(M SAM) are 0.8 s(-1) and 2.5 mM, and 8.15 s(-1) and 0.014 mM, respectively. These results suggest SAM has higher binding affinity for MppJ than Ppy, and the C--C bond formation in betamPpy might be the rate-limiting step, as opposed to the C--S bond breakage in SAM.

Understanding how DNA polymerases control fidelity requires elucidation of the mechanisms of matched and mismatched dNTP incorporations. Little is known about the latter because mismatched complexes do not crystallize readily. In this report, we employed small-angle X-ray scattering (SAXS) and structural modeling to probe the conformations of different intermediate states of mammalian DNA polymerase beta (Pol beta) in its wild-type and an error-prone variant, I260Q. Our structural results indicate that the mismatched ternary complex lies in-between the open and the closed forms, but more closely resembles the open form for WT and the closed form for I260Q. On the basis of molecular modeling, this over-stabilization of mismatched ternary complex of I260Q is likely caused by formation of a hydrogen bonding network between the side chains of Gln(260), Tyr(296), Glu(295) and Arg(258), freeing up Asp(192) to coordinate MgdNTP. These results argue against recent reports suggesting that mismatched dNTP incorporations follow a conformational path distinctly different from that of matched dNTP incorporation, or that its conformational closing is a major contributor to fidelity.

β-1,4-Mannanase (β-mannanase) is a key enzyme in decomposing mannans, which are abundant components of hemicelluloses in the plant cell wall. Therefore, mannan hydrolysis is highly valuable in a wide array of industrial applications. β-Mannanase isolated from Aspergillus niger BK01 (ManBK) was classified into glycoside hydrolase family GH5. ManBK holds great potential in biotechnological applications owing to its high thermostability. Here, ManBK was expressed and purified in Pichia pastoris and the recombinant protein was crystallized. Crystals belonging to the orthorhombic space group C2221, with unit-cell parameters a = 93.58, b = 97.05, c = 147.84 A, were obtained by the sitting-drop vapour-diffusion method and diffracted to 1.57 A resolution. Structure determination using molecular-replacement methods is in progress.

A thermophilic glycoside hydrolase family 16 (GH16) β-1,3-1,4-glucanase from Clostridium thermocellum (CtLic16A) holds great potentials in industrial applications due to its high specific activity and outstanding thermostability. In order to understand its molecular machinery, the crystal structure of CtLic16A was determined to 1.95 A resolution. The enzyme folds into a classic GH16 β-jellyroll architecture which consists of two β-sheets atop each other, with the substrate-binding cleft lying on the concave side of the inner β-sheet. Two Bis–Tris propane molecules were found in the positive and negative substrate binding sites. Structural analysis suggests that the major differences between the CtLic16A and other GH16 β-1,3-1,4-glucanase structures occur at the protein exterior. Furthermore, the high catalytic efficacy and thermal profile of the CtLic16A are preserved in the enzyme produced in Pichia pastoris , encouraging its further commercial applications.

SummaryYisP is involved in biofilm formation in Bacillus subtilis and has been predicted to produce C30 isoprenoids. We determined the structure of YisP and observed that it adopts the same fold as squalene and dehydrosqualene synthases. However, the first aspartate-rich motif found in essentially all isoprenoid synthases is aspartate poor in YisP and cannot catalyze head-to-head condensation reactions. We find that YisP acts as a phosphatase, catalyzing formation of farnesol from farnesyl diphosphate, and that it is the first phosphatase to adopt the fold seen in the head-to-head prenyl synthases. Farnesol restores biofilm formation in a Δyisp mutant and modifies lipid membrane structure similarly to the virulence factor staphyloxanthin. This work clarifies the role of YisP in biofilm formation and suggests an intriguing possibility that many of the YisP-like homologs found in other bacteria may also have interesting products and functions.

Structure-guided design of substrate-binding pocket inversed the stereoselectivity of an NADH-dependent medium-chain alcohol dehydrogenase (MDR) from Prelog to anti-Prelog. The pocket-forming amino acids, especially the unconserved residues as hotspots, play critical roles in directing MDRs' stereoselectivity.

In biological systems, methylation is most commonly performed by methyltransferases (MTs) using the electrophilic methyl sourceS-adenosyl-L-methionine (SAM)viathe SN2 mechanism. (2S,3S)-β-Methylphenylalanine, a nonproteinogenic amino acid, is a building unit of the glycopeptide antibiotic mannopeptimycin. The gene product ofmppJfrom the mannopeptimycin-biosynthetic gene cluster is the MT that methylates the benzylic C atom of phenylpyruvate (Ppy) to give βMePpy. Although the benzylic C atom of Ppy is acidic, how its nucleophilicity is further enhanced to become an acceptor forC-methylation has not conclusively been determined. Here, a structural approach is used to address the mechanism of MppJ and to engineer it for new functions. The purified MppJ displays a turquoise colour, implying the presence of a metal ion. The crystal structures reveal MppJ to be the first ferric ion SAM-dependent MT. An additional four structures of binary and ternary complexes illustrate the molecular mechanism for the metal ion-dependent methyltransfer reaction. Overall, MppJ has a nonhaem iron centre that bind, orients and activates the α-ketoacid substrate and has developed a sandwiched bi-water device to avoid the formation of the unwanted reactive oxo-iron(IV) species during theC-methylation reaction. This discovery further prompted the conversion of the MT into a structurally/functionally unrelated new enzyme. Through stepwise mutagenesis and manipulation of coordination chemistry, MppJ was engineered to perform both Lewis acid-assisted hydration and/orO-methyltransfer reactions to give stereospecific new compounds. This process was validated by six crystal structures. The results reported in this study will facilitate the development and design of new biocatalysts for difficult-to-synthesize biochemicals.

Trypanosomatid parasites are the causative agents of many neglected tropical diseases and there is currently considerable interest in targeting endogenous sterol biosynthesis in these organisms as a route to the development of novel anti-infective drugs. Here, we report the first x-ray crystallographic structures of the enzyme squalene synthase (SQS) from a trypanosomatid parasite, Trypanosoma cruzi, the causative agent of Chagas disease. We obtained five structures of T. cruzi SQS and eight structures of human SQS with four classes of inhibitors: the substrate-analog S-thiolo-farnesyl diphosphate, the quinuclidines E5700 and ER119884, several lipophilic bisphosphonates, and the thiocyanate WC-9, with the structures of the two very potent quinuclidines suggesting strategies for selective inhibitor development. We also show that the lipophilic bisphosphonates have low nM activity against T. cruzi and inhibit endogenous sterol biosynthesis and that E5700 acts synergistically with the azole drug, posaconazole. The determination of the structures of trypanosomatid and human SQS enzymes with a diverse set of inhibitors active in cells provides insights into SQS inhibition, of interest in the context of the development of drugs against Chagas disease. © 2014 Shang, et al.

The β-L-arabinofuranosidase from Bifidobacterium longum JCM 1217 (HypBA1), a DUF1680 family member, was recently characterized and classified to the glycoside hydrolase family 127 (GH127) by CAZy. The HypBA1 exerts exo-glycosidase activity to hydrolyze β-1,2-linked arabinofuranose disaccharides from non-reducing end into individual L-arabinoses. In this study, the crystal structures of HypBA1 and its complex with L-arabinose and Zn2+ ion were determined at 2.23-2.78 A resolution. HypBA1 consists of three domains, denoted N-, S- and C-domain. The N-domain (residues 1-5 and 434-538) and C-domain (residues 539-658) adopt β-jellyroll architectures, and the S-domain (residues 6-433) adopts an (α/α)6-barrel fold. HypBA1 utilizes the S- and C-domain to form a functional dimer. The complex structure suggests that the catalytic core lies in the S-domain where Cys417 and Glu322 serve as nucleophile and general acid/base, respectively, to cleave the glycosidic bonds via a retaining mechanism. The enzyme contains a restricted carbohydrate-binding cleft, which accommodates shorter arabino oligosaccharides exclusively. In addition to the complex crystal structures, we have one more interesting crystal which contains the apo HypBA1 structure without Zn2+ ion. In this structure, the Cys417-containing loop is shifted away due to the disappearance of all coordinate bonds in the absence of Zn2+ ion. Cys417 is thus diverted from the attack position, and probably is also protonated, disabling its role as the nucleophile. Therefore, Zn2+ ion is indeed involved in the catalytic reaction through maintaining the proper configuration of active site. Thus the unique catalytic mechanism of GH127 enzymes is now well elucidated.

Pullulanase is a debranching enzyme that specifically hydrolyzes the α-1,6 glycosidic linkage of α-glucans, and has wide industrial applications. Here, we report structural and functional studies of a new thermostable pullulanase from Anoxybacillus sp. LM18-11 (PulA). Based on the hydrolysis products, PulA was classified as a type I pullulanase. It showed maximum activity at 60°C and pH 6.0. Kinetic study showed that the specific activity and Km for pullulan of PulA are 750 U mg(-1) and 16.4 μmol L(-1), respectively. PulA has a half-life of 48 h at 60°C. The remarkable thermostability makes PulA valuable for industrial usage. To further investigate the mechanism of the enzyme, we solved the crystal structures of PulA and its complexes with maltotriose and maltotetraose at 1.75-2.22 Å resolution. The PulA structure comprises four domains (N1, N2, A, and C). A is the catalytic domain, in which three conserved catalytic residues were identified (D413, E442, and D526). Two molecules of oligosaccharides were seen in the catalytic A domain in a parallel binding mode. Interestingly, another two oligosaccharides molecules were found between the N1 domain and the loop between the third β-strand and the third α-helix in the A domain. Based on sequence alignment and the ligand binding pattern, the N1 domain is identified as a new type of carbohydrate-binding motif and classified to the CBM68 family. The structure solved here is the first structure of pullulanase which has carbohydrate bound to the N1 domain.

Many enzymes involved in isoprenoid (or terpene/terpenoid) biosynthesis are prenyl transferases (PTs) that catalyze condensation reactions between prenyl diphosphates and various acceptors and structurally, most contain one of six main folds: α, β, γ, δ, e, or ζ.[1] Recently, several new PT structures that contain a triose phosphate isomerase (TIM) barrel fold have been discovered,[2] and there is considerable interest in their mechanisms of action.[2b, 2e] The first structure published was that of Archaeoglobus fulgidus geranylgeranylglyceryl phosphate synthase (AfGGGPS),[2d] which catalyzes the reaction between geranylgeranyl diphosphate (GGPP) and glycerol-1-phosphate (G1P) to form geranylgeranylglyceryl phosphate (GGGP) (Scheme 1), a precursor of the (perhydro)geranylgeranyl-based phospholipids found in Archaea.[3] A very similar reaction is carried out by the enzyme PcrB in several Bacilli but in this case the prenyl donor is heptaprenyl diphosphate (HepPP).[4] The PcrB product, heptaprenylglyceryl phosphate (HepGP), is then dephosphorylated to heptaprenylglycerol, then acetylated, Scheme 1.[4] The function of this ester product is unknown. However, PcrB forms part of an operon with PcrA, an essential DNA helicase,[5] and a ΔpcrB mutant (in Bacillus subtilis) has a deranged, “cloggy” pattern of growth,[4] so it seems likely that PcrB is important for growth (or perhaps, virulence) in other Bacilli, such as the pathogen Staphylococcus aureus, and may be of interest as a drug target.

Xylanases are capable of decomposing xylans, the major components in plant cell wall, and releasing the constituent sugars for further applications. Because xylanase is widely used in various manufacturing processes, high specific activity, and thermostability are desirable. Here, the wild-type and mutant (E146A and E251A) catalytic domain of xylanase from Thermoanaerobacterium saccharolyticum JW/SL-YS485 (TsXylA) were expressed in Escherichia coli and purified subsequently. The recombinant protein showed optimal temperature and pH of 75°C and 6.5, respectively, and it remained fully active even after heat treatment at 75°C for 1 h. Furthermore, the crystal structures of apo-form wild-type TsXylA and the xylobiose-, xylotriose-, and xylotetraose-bound E146A and E251A mutants were solved by X-ray diffraction to high resolution (1.32-1.66 Å). The protein forms a classic (β/α)8 folding of typical GH10 xylanases. The ligands in substrate-binding groove as well as the interactions between sugars and active-site residues were clearly elucidated by analyzing the complex structures. According to the structural analyses, TsXylA utilizes a double displacement catalytic machinery to carry out the enzymatic reactions. In conclusion, TsXylA is effective under industrially favored conditions, and our findings provide fundamental knowledge which may contribute to further enhancement of the enzyme performance through molecular engineering.

Xylan-1,4-β-xylosidase (β-xylosidase) hydrolyses xylo-oligomers at their non-reducing ends into individual xylose units. Recently, XylC, a β-xylosidase from Thermoanaerobacterium saccharolyticum JW/SL-YS485, was found to be structurally different from corresponding glycosyl hydrolases in the CAZy database (http://www.cazy.org/), and was subsequently classified as the first member of a novel family of glycoside hydrolases (GH120). In the present paper, we report three crystal structures of XylC in complex with Tris, xylobiose and xylose at 1.48–2.05 Å (1 Å=0.1 nm) resolution. XylC assembles into a tetramer, and each monomer comprises two distinct domains. The core domain is a right-handed parallel β-helix (residues 1–75 and 201–638) and the flanking region (residues 76–200) folds into a β-sandwich domain. The enzyme contains an open carbohydrate-binding cleft, allowing accommodation of longer xylo-oligosaccharides. On the basis of the crystal structures and in agreement with previous kinetic data, we propose that XylC cleaves the glycosidic bond by the retaining mechanism using two acidic residues Asp382 (nucleophile) and Glu405 (general acid/base). In addition to the active site, nine other xylose-binding sites were consistently observed in each of the four monomers, providing a possible reason for the high tolerance of product inhibition.

In the search for new efficacious antibiotics, biosynthetic engineering offers attractive opportunities to introduce minor alterations to antibiotic structures that may overcome resistance. Dbv29, a flavin-containing oxidase, catalyzes the four-electron oxidation of a vancomycin-like glycopeptide to yield A40926. Structural and biochemical examination of Dbv29 now provides insights into residues that govern flavinylation and activity, protein conformation and reaction mechanism. In particular, the serendipitous discovery of a reaction intermediate in the crystal structure led us to identify an unexpected opportunity to intercept the normal enzyme mechanism at two different points to create new teicoplanin analogs. Using this method, we synthesized families of antibiotic analogs with amidated and aminated lipid chains, some of which showed marked potency and efficacy against multidrug resistant pathogens. This method offers a new strategy for the development of chemical diversity to combat antibacterial resistance.

The unique pharmacokinetic and pharmacodynamic activities of glycopeptide antibiotics are conferred by tailoring steps occurring on the aglycone. Here, we report that protein Dbv29, involved in the biosynthesis of A40926, is a novel flavin mononucleotide-dependent primary alcohol glycopeptide hexose oxidase that carries out a four-electron oxidation reaction. Dbv29 catalyzes the last step in a multistep sequence to complete N-acyl aminoglucuronic acid substituent biosynthesis for a potent drug lead. The characterized enzyme may provide a new way to enhance the efficacy of currently used glycopeptide drugs. This detailed function-mechanism analysis of the enzyme increases our knowledge of this new class of enzyme.