Search

The electromagnetic enhancement factor (M) of a plasmonic nanostructure is the crucial quantity that characterizes its enhanced optical effect. Retrieving it experimentally is however stymied by th...

Novel nanohybrid arrays of silver (Ag)-on-silicate platelets with flexibility and three-dimensional (3D) hot-junctions (particularly in z-direction) were discovered for improving the stability of free nanoparticles and the mobility of rigid (glass or silicon-based) substrates in surface-enhanced Raman scattering (SERS) detection technology. Since the Ag nanoparticles are adsorbed on both sides of few nanometer-thick silicate platelets (single-layer exfoliated clay), the geometric arrangement of Ag on both sides of the nanoplatelets (Ag/NSP) may induce strong hot-junctions (z-direction) in reference to the pristine montmorillonite clay (multi-layers) at the thickness of ∼20 nm, measured by small molecules (adenine of DNA) and bacteria (S. aureus). Enormous red-shifts (16 nm wavelength difference) were observed between single layer and multi-layer silicate platelets, showing that huge surface plasmon enhancement comes from hot junctions in the z-direction (∼7 times higher than 2D hot-junctions of traditional SERS biochips). Further, the Ag/NSP SERS substrate displays a free floating mobility and optical transparency (less background interference), which inherently increase the contacted surface-area between the substrate and microorganisms, to enhance the SERS sensitivity. The surface modulation with a surfactant could be complimentary towards a variety of microorganisms including hydrophobic microbes, irregular-shaped microorganisms and larger biological cells due to their mutual specific surface interactions. It was anticipated to apply in the rapid detection for varied microbes with label-free and culture-free characterizations.

Signal-to-background ratio of surface-enhanced Raman scattering (SERS) plays an important role in the analytic applications of SERS. Its dependences on excitation wavelength and gap between metal particles were studied theoretically and experimentally. We show that this ratio is higher at smaller gaps for the same excitation wavelength and is higher for the wavelengths having higher values of the absolute values of the dielectric function of the metal. This study thus results in design guidelines in the fabrication of SERS-active substrates with high signal-to-background ratio.

Recently, specific biomarkers in the surface-enhanced Raman scattering (SERS) spectra of bacteria have been successfully exploited for rapid bacterial antibiotic susceptibility testing (AST) - dubbed SERS-AST. The biomolecules responsible for these bacterial SERS biomarkers have been identified as several purine derivative metabolites involved in bacterial purine salvage pathways (W. R. Premasiri, J. C. Lee, A. Sauer-Budge, R. Theberge, C. E. Costello and L. D. Ziegler, Anal. Bioanal. Chem., 2016, 408, 4631). Here we quantified these metabolites in the SERS spectra of Staphylococcus aureus and Escherichia coli using ultra-performance liquid chromatography/electrospray ionization-mass spectrometry (UPLC/ESI-MS). The time dependences of the concentrations of these molecules were measured using 13C- or 12C-purine derivatives as internal and external standards respectively in UPLC/ESI-MS measurements. Surprisingly, a single S. aureus and an E. coli cell were found to release millions of adenine and hypoxanthine into a water environment in an hour respectively. Furthermore, simulated SERS spectra of bacterial supernatants based on the mixtures of purine derivatives with measured concentrations also show great similarity with those of the corresponding bacterial samples. Our results not only provide a quantitative foundation for the emerging SERS-AST method but also suggest the potential of exploiting SERS for in situ monitoring the changes in bacterial purine salvage processes in response to different physical and chemical challenges.

The accumulation of lipids in macrophages is a key factor that promotes the formation of atherosclerotic lesions. Several methods such as biochemical assays and neutral lipid staining have been used for the detection of lipids in cells. However, a method for real-time quantitative assessment of the lipid content in living macrophages has yet to be shown, particularly for its kinetic process with drugs, due to the lack of suitable tools for non-invasive chemical detection. Here we demonstrate label-free real-time monitoring of lipid droplets (LDs) in living macrophages by using coherent anti-Stokes Raman scattering (CARS) microscopy. In addition, we have established an automated image analysis method based on maximum entropy thresholding (MET) to quantify the cellular lipid content. The result of CARS image analysis shows a good correlation (R(2) > 0.9) with the measurement of biochemical assay. Using this method, we monitored the processes of lipid accumulation and hydrolysis in macrophages. We further characterized the effect of a lipid hydrolysis inhibitor (diethylumbelliferyl phosphate, DEUP) and determined the kinetic parameters such as the inhibition constant, K(i). Our work demonstrates that the automated quantitative analysis method is useful for the studies of cellular lipid metabolism and has potential for preclinical high-throughput screening of therapeutic agents related to atherosclerosis and lipid-associated disorders.

Rapid bacterial antibiotic susceptibility test (AST) and minimum inhibitory concentration (MIC) measurement are important to help reduce the widespread misuse of antibiotics and alleviate the growing drug-resistance problem. We discovered that, when a susceptible strain of Staphylococcus aureus or Escherichia coli is exposed to an antibiotic, the intensity of specific biomarkers in its surface-enhanced Raman scattering (SERS) spectra drops evidently in two hours. The discovery has been exploited for rapid AST and MIC determination of methicillin-susceptible S. aureus and wild-type E. coli as well as clinical isolates. The results obtained by this SERS-AST method were consistent with that by the standard incubation-based method, indicating its high potential to supplement or replace existing time-consuming methods and help mitigate the challenge of drug resistance in clinical microbiology.

We have fabricated surface-enhanced Raman scattering (SERS) substrates based on arrays of silver nanoparticles grown on porous anodic alumina templates. Using this nanotechnology platform, label-free and high-speed detection of bacteria are achieved. SERS spectra of various bacteria including Staphylococcus Aureus (Gram-positive bacterium), Klebsiella Pneumoniae (Gram-negative bacterium), and Mycobacterium Smegmatis (Mycobacterium) were recorded. The highly reproducible SERS-based technological platform is capable of differentiating different kinds of bacteria by PCA, LDA, clustering analysis, and SVM methods, which provides promising opportunity for biosensing of clinical microbes.

Formation of ordered magnetic states in germanium nanostructures embedded in SiO2 has been investigated. Samples with the nanostructures were prepared by sputtering deposition on Si(100) substrates, followed by thermal annealing in vacuum. Transmission electron microscopy, energy dispersive X-ray spectrometry, and Raman spectroscopy have been used to characterize the samples. Magnetic measurements were performed using a superconducting quantum interference device. Size-effect induced magnetic orderings in the germanium nanostructures were found to be present at room temperatures and below. Superparamagnetic behavior was observed at temperatures above 230 K, whereas thermal excitation of spin reorientation and magnetic coupling has been revealed at temperatures below 60 K. Inverted hysteresis loops with negative remanences and multiple plateaus revealed the ferri- or antiferromagnetic nature of the coupling. Inter-domain coupling and effect of magnetic anisotropy will be discussed based on the experimental results and simulations with a spin reorientation model.

The addition of copper chlorophyll and its derivatives (Cu-Chl) to vegetable oils to disguise them as more expensive oils, such as virgin olive oils, would not only create public confusion, but also disturb the olive oil market. Given that existing detection methods of Ch-Chl in oils, such as LC-MS are costly and time consuming, it is imperative to develop economical and fast analytical techniques to provide information quickly. This paper demonstrates a rapid analytical method based on surface-enhanced Raman spectroscopy (SERS) to detect Cu-Chl in vegetable oils; the spectroscopic markers of Cu-Chl are presented and a detection limit of 5 mg kg(-1) is demonstrated. The analysis of a series of commercial vegetable oils is undertaken with this method and the results verified by a government agency. This study shows that a SERS-based assessment method holds high potential for quickly pinpointing the addition of minute amounts of Cu-Chl in vegetable oils.

Raman spectroscopy, which is based on the inelastic scattering of photons by chemical entities, has been successfully utilized for the investigation of adsorbed molecules on surfaces, although the low cross section limits its applications. Surface-enhanced Raman scattering (SERS) has drawn a lot of attention since its discovery in 1974, primarily because it can greatly enhance the normally weak Raman signal and thereby facilitate the convenient identification of the vibrational signatures of molecules in chemical and biological systems. Recently, the observation of single-molecule Raman scattering has further enhanced the Raman detection sensitivity limit and widened the scope of SERS for sensor applications. Although SERS effects can be achieved simply by exploiting the electromagnetic resonance properties of roughened surfaces or nanoparticles of Au or Ag, the fabrication of reliable SERS substrates with uniformly high enhancement factors remains the focus of much research. Spraying Au or Ag colloids on a substrate leads to an extremely high SERS signal at some local ‘hot-junctions’; however, it is not easy to achieve a reliable, stable, and uniform SERS signal spanning a wide dynamical range using this method. Van Duyne and coworkers have used nanosphere lithography, while Liu and Lee exploited soft lithography, in order to fabricate Ag nanoparticle arrays with high SERS activity and improved uniformity. Kall and co-workers have shown theoretically that the effective Raman cross section of a molecule placed between two metal nanoparticles can be enhanced by more than 12 orders of magnitude. Such enhancement is likely to be related to the ‘hot-junctions’ observed in some SERS experiments. Several theoretical groups have also investigated field enhancement for SERS from metal nanoparticle arrays. Specifically, Garcia–Vidal and Pendry proposed that very localized plasmon modes, created by strong electromagnetic coupling between two adjacent metallic objects, dominate the SERS response in an array of nanostructures. The interparticle-coupling-induced enhancement was attributed to the broadening of the plasmon resonance peak because the probability of the resonance covering both the excitation wavelength and the Raman peak increases with its width. They calculated the average enhancement factor over the surfaces of an array of infinitely long Ag nanorods with semicircular cross sections, and showed that significant near-field interaction occurs between adjacent nanorods when the gap between the nanorods reaches half the value of their diameter. Other groups have studied the dependence of the enhancement factor on the gap between adjacent nanoparticles on a SERS active substrate. For example, Gunnarsson et al. investigated SERS on ordered Ag nanoparticle arrays with an interparticle gap above 75 nm. Lee and co-workers were able to achieve the temperature-controlled variation of interparticle gaps between Ag nanoparticles embedded in a polymer membrane. Wei et al. performed SERS on self-organized Au nanoparticle arrays with narrow interparticle gaps, although they have not carried out a detailed investigation of the dependence of the SERS signal on the interparticle gap. Sauer et al. investigated SERS from nanowire arrays embedded in an alumina matrix with interparticle gaps of ∼ 110 nm, but no gap-related enhancement was observed in their experiment. These theoretical and experimental studies indicate that the precise control of gaps between nanostructures on a SERS-active substrate in the sub-10 nm regime, which is extremely difficult to obtain by existing nanofabrication methods, is likely to be critical for the fabrication of substrates with uniformly high enhancement factors, and for understanding collective surface plasmons existing inside the gaps. C O M M U N IC A IO N S

Nanowire-based plasmonic metamaterials exhibit many intriguing properties related to the hyperbolic dispersion, negative refraction, epsilon-near-zero behavior, strong Purcell effect, and nonlinearities. We have experimentally and numerically studied the electromagnetic modes of individual nanowires (meta-atoms) forming the metamaterial. High-resolution, scattering-type near-field optical microscopy has been used to visualize the intensity and phase of the modes. Numerical and analytical modeling of the mode structure is in agreement with the experimental observations and indicates the presence of the nonlocal response associated with cylindrical surface plasmons of nanowires.

We demonstrate a process to selectively tune the pore size of an individual nanochannel in an array of high-aspect-ratio anodic aluminum oxide (AAO) nanochannels in which the pore sizes were originally uniform. This novel process enables us to fabricate arrays of AAO nanochannels of variable sizes arranged in any custom-designed geometry. The process is based on our ability to selectively close an individual nanochannel in an array by using focused ion beam (FIB) sputtering, which leads to redeposition of the sputtered material and closure of the nanochannel with a capping layer of a thickness depending on the energy of the FIB. When such a partially capped array is etched in acid, the capping layers are dissolved after different time delays due to their different thicknesses, which results in differences in the time required for the following pore-widening etching processes and therefore creates an array of nanochannels with variable pore sizes. The ability to fabricate such AAO templates with high-aspect-ratio nanochannels of tunable sizes arranged in a custom-designed geometry paves the way for the creation of nanophotonic and nanoelectronic devices.

Inspecting biological cells with bright-field light microscopy often engenders a challenge, owing to their optical transparency. We show that imaging contrast can be greatly enhanced as yeast cells are placed on a silver nanoparticle array. Its near- and far-field traits, revealed by electrodynamic simulations, illustrate that the enhancement is attributed to the sensitivity of its plasmonic characteristics to the attached cells. This study demonstrates that the silver nanoparticle array can serve as the agent for concurrently enhancing Raman scattering and imaging contrast of microorganisms for identification and examination.

A broadband microwave/millimeter-wave (MMW) Gilbert-cellmixer using standard 1P8M 0.13-/spl mu/m complementary metal oxide semiconductor (CMOS) technology is presented in this letter. Two radio frequency (RF) transformer baluns are used in RF-and local oscillator (LO)-ports to convert single-ended signals to differential signals. Thin film microstrip line is employed for the matching networks and transformer design. This mixer has a conversion gain of better than 5dB from 9 to 50GHz. Between 5 and 50GHz,the RF- and LO-to-intermediate frequency (IF) isolations are better than 40dB. The RF-to-LO and LO-to-RF isolations are all better than 20dB. To the authors' knowledge, this is the first CMOS Gilbert-cell mixer operating to MMW frequency to date.

Detecting bacteria in clinical samples without using time-consuming culture processes would allow rapid diagnoses. Such a culture-free detection method requires the capture and analysis of bacteria from a body fluid, which are usually of complicated composition. Here we show that coating Ag-nanoparticle arrays with vancomycin (Van) can provide label-free analysis of bacteria via surface-enhanced Raman spectroscopy (SERS), leading to a ~1,000-fold increase in bacteria capture, without introducing significant spectral interference. Bacteria from human blood can be concentrated onto a microscopic Van-coated area while blood cells are excluded. Furthermore, a Van-coated substrate provides distinctly different SERS spectra of Van-susceptible and Van-resistant Enterococcus, indicating its potential use for drug-resistance tests. Our results represent a critical step towards the creation of SERS-based multifunctional biochips for rapid culture- and label-free detection and drug-resistant testing of microorganisms in clinical samples.

Opaque Raman-enhancing substrates made of Ag nanoparticles on incompletely oxidized aluminum templates have been rendered transparent by an ion-drift process to complete the oxidation. The result shows that the transparent substrates exhibit high/uniform surface-enhanced Raman scattering (SERS) capability and good optical transmissivity, allowing for concurrent SERS characterization and high contrast transmission-mode optical imaging of S. aureus bacteria. We also demonstrate that the transparent substrates can used in conjunction with optical fibers as SERS sensors for in situ detection of malachite green down to 10 −9 M. (Some figures in this article are in colour only in the electronic version)

Arrays of nanowires with identical length are fabricated by using ultrasound to remove the length fluctuation among nanowires, which are deliberately grown in burette-shaped nanochannels on an anodic anumina film. The process allows the fabrication of 10 micron Ag-nanowire arrays with length fluctuation as small as 0.09%. By integrating the process with a focused-ion-beam-based lithographic method to grow nanowires into selective nanochannels in an array, we fabricate arrays of uniform-length nanowires that are arranged in a custom-designed lateral geometry. The ability to fabricate such artificial nanomaterials paves the way for the exploitation of their unusual optical, electrical, and thermal properties.

Different arrays of Ag-nanoparticles grown on anodic alumina nanochannels with precisely tunable gaps (5~25 nm) are exploited for surface-enhanced Raman spectroscopy (SERS). The enhancement becomes significant for gaps below 10 nm and turns dramatically large when gaps reach an unprecedented value of 5 nm. The results are quantitatively consistent with theories based on collectively coupled surface plasmon. Such nanofabricated substrates with consistently uniform and large dynamic range have many chemical/biological sensing applications.

The World Wide Web provides a huge distributed web database. However, information in the web database is free formatted and unorganized. Traditional keyword-based retrieval approaches are no longer appropriate. In this paper, we consider a framework for constructing agents that can simulate the behavior of human browsing on the Internet. Given a specific target, such an agent will make use of existing search engines to navigate through the web to locate the sites containing the target information and extract them into a database. We refer to these types of agents as Personal Navigating Agents (PNA). Since the information service is domain specific, we shall first focus on those PNA that can retrieve people’s information on the web in this paper. In this particular experiment, given the name of a university, we shall extract the following information about its faculty: name, telephone number, fax number, email address and URL. We explore web page knowledge in two ways: First, we develop a tagging system for each web page to facilitate information extraction. Our tagging system employs an HTML parser together with a natural language semantic tagger. These semantic tags are more general than part-of-speech tags used in linguistics. Second, we equip our PNA with a navigation map. A navigation map will guide our PNA to traverse through related pages and to arrive at pages containing the target information. In our experiments, our prototype agents have successfully explored a university web site and extracted target information with a very high accuracy.

Rapid and accurate diagnosis for pathogens and their antibiotic susceptibility is critical for controlling bacterial infections. Conventional methods for determining bacterium's sensitivity to antibiotic depend mostly on measuring the change of microbial proliferation in response to the drug. Such "biological assay" inevitably takes time, ranging from days for fast-growing bacteria to weeks for slow-growers. Here, a novel tool has been developed to detect the "chemical features" of bacterial cell wall that enables rapid identification of drug resistant bacteria within hours. The surface-enhanced Raman scattering (SERS) technique based on our newly developed SERS-active substrate was applied to assess the fine structures of the bacterial cell wall. The SERS profiles recorded by such a platform are sensitive and stable, that could readily reflect different bacterial cell walls found in Gram-positive, Gram-negative, or mycobacteria groups. Moreover, characteristic changes in SERS profile were noticed in the drug-sensitive bacteria at the early period (i.e., approximately 1 hr) of antibiotic exposure, which could be used to differentiate them from the drug-resistant ones. The SERS-based diagnosis could be applied to a single bacterium. The high-speed SERS detection represents a novel approach for microbial diagnostics. The single-bacterium detection capability of SERS makes possible analyses directly on clinical specimen instead of pure cultured bacteria.

Two dimensional arrays of monodispersed Ag-nanoparticles separated by different gaps with sub-10 nm precision are fabricated on anodic alumina substrates with self-organized pores. Light scattering spectra from the arrays evolve with the gaps, revealing plasmonic coupling among the nanoparticles, which can be satisfactorily interpreted by analytical formulae derived from generic dipolar approximation. The general formulism lays down a foundation for predicting the Q factor of an array of metallic nano-particles and its geometric characteristics.