Search

Sexual assault sample processing, despite recent funding and research efforts, remains time-consuming, labourious, and inefficient. These limitations, combined with the prevalence of sexual assaults, have prompted the need to develop a cheaper, quicker, and more robust method for separating victim and perpetrator contributions within sexual assault evidence so that analysts can keep pace with submissions and cases can be resolved in a timely manner. Thus, this study examined the use of a combined enzymatic and alkaline approach for differential cell lysis-with the goal of developing a quick, cheap, and more efficient DNA isolation method. Quantification results for this assay revealed that (72.0 ± 18.3)%, (15.8 ± 14.2)%, and (29.5 ±  23.7)% of total DNA were retained in sperm fractions for neat semen, neat vaginal, and semen-vaginal mixture eluates, respectively. Short tandem repeat (STR) analysis of mixture samples processed with this technique exhibited sperm fraction DNA profiles with mean male-to-female ratios of 1.74:1, which was a 3.01 ± 2.30-fold improvement in male-to-female ratios and led to the recovery of 5.90 ± 7.80 unshared male contributor alleles in sperm fractions that were otherwise undetected in unseparated controls. Overall, this study presented a modified differential lysis approach using prep GEM™ and sodium hydroxide treatments that can accomplish cell elution and fractional lysis within 25 min. Future studies should investigate alternative "non-sperm" cell lysis methods to enhance lysis efficiency and minimize the potential for inhibition, as well as the optimization and automation of this technique., Key Points: Traditional sexual assault sample processing methods are time-consuming and inefficient.This modified differential lysis method produces lysates with sufficient DNA yield and quality.A combined technique using enzymatic and alkaline lysis can accomplish fractional separation.Lysis with prep GEM and NaOH absent purification is compatible with downstream processes., (© The Author(s) 2024. Published by OUP on behalf of the Academy of Forensic Science.)

While efforts have been made to reduce the pervasive backlog of sexual assault evidence collection kits, the actual laboratory process remains very time-consuming due to the requirement of a differential lysis step before DNA purification, as well as intricate mixture analysis towards the end of the DNA workflow. Recently, an alternative, direct-to-amplification sperm lysis method (using 1 M NaOH) was identified. However, a direct cell lysis method for non-sperm cells has not been identified yet. Thus, the primary objective of this work was to find an alternative method that is quick, inexpensive, and does not require multiple purification steps for the lysis of non-sperm cells in sexual assault samples. In this study, vaginal swab samples were lysed with the control method, prepGEM™, as well as six alternative reagents: alkaline buffer with 25-200 mM NaOH, high-salt stain extraction buffer, modified radioimmunoprecipitation assay (RIPA) buffer, mammalian protein extraction reagent (M-PER™), digitonin buffer, and urea/thiourea buffer. Quantification using Quantifiler® Trio of vaginal and semen lysates revealed that the alkaline (25 mM NaOH) and M-PER™ methods were efficient for the lysis of vaginal epithelial cells without substantial sperm cell lysis. Following quantification, analysis of STR profiles from vaginal lysates revealed that the M-PER™ method showed promising results across all metrics examined, including the percentage of detected STR alleles, mean peak heights, peak height ratio, and interlocus balance. Thus, this method was recommended as an alternative to the traditional differential lysis method for non-sperm cells given its ability to produce amplification-ready lysates without any DNA purification step., (© 2023 The Authors. Journal of Forensic Sciences published by Wiley Periodicals LLC on behalf of American Academy of Forensic Sciences.)

FTA ® cards enable efficient, long-term storage of blood and buccal cells/saliva samples for future forensic DNA analysis; these are typically collected as known reference samples, as opposed to evidentiary, crime scene samples. Upon contact with the FTA ® card, cells are lysed and the DNA is immobilized. Different FTA ® cards are available and have been specially formulated based on sample type: bloodstains are added to the traditional FTA ® Card, while colorless sources (e.g., buccal cells/saliva) are added to the FTA ® Indicating Card. The main difference between these cards is the presence of a pink dye embedded in the indicating cards that becomes white when exposed to colorless fluids, like saliva; this aids in location confirmation of the stain for future sampling. Although DNA can be eluted/extracted from FTA ® punches using various methods or, alternatively, direct STR amplification from unpurified punches can be performed, the protocol herein describes a simple purification method for bloodstained punches from FTA ® Cards as well as buccal/saliva-stained punches from FTA ® Indicating Cards. Following this purification, STR amplification can be performed via the "punch-in" method., (© 2023. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

The prevalence of sexual assault cases and increasingly sensitive DNA analysis methods have resulted in sexual assault kit backlogs in the United States. Although traditional DNA extraction and purification utilizing detergents, proteinase K, and DTT have been the primary technique for lysing sperm cell fractions from these samples, it is labor-intensive and inefficient regarding time and sperm DNA recovery - hindering the ability of forensic analysts to keep pace with evidence submissions. Thus, this study examined seven alternative sperm cell lysis techniques to develop a method that could efficiently lyse sperm and consistently generate high-quality profiles while also reducing time, labor, and cost requirements. Microscopic examination of lysates indicated only Casework Direct and alkaline techniques could lyse all spermatozoa within samples, while quantification results demonstrated all methods performed comparably to the control method of forensicGEM™ Sperm (p > 0.06). Amplification with 0.25 ng DNA revealed that unpurified lysates from Casework Direct, alkaline, and NP-40 techniques produced DNA profiles with acceptable mean STR peak heights and interlocus balance, both of which were similar to or better than the control. Overall, this study demonstrated the ability of Casework Direct, alkaline, and NP-40 methods to efficiently lyse spermatozoa and provide high-quality STR profiles despite the absence of a purification step. Ultimately, based on the data reported herein, alkaline lysis is the recommended alternative sperm lysis approach given its ability to generate high-quality profiles, save time, and decrease the cost per reaction when compared to traditional sperm cell lysis methods., (© 2022 The Authors. Journal of Forensic Sciences published by Wiley Periodicals LLC on behalf of American Academy of Forensic Sciences.)

Sample collection at the crime scene can introduce variations in DNA recovery based upon the substrate from which a sample is collected, the material of the collection device used, or the storage conditions after collection. There are many factors during this process that can degrade the sample during drying and storage, and before DNA extraction can be performed. The purpose of this study was to evaluate and compare the performance of standard cotton swab collection with the Bode BioSafe ® swab, which includes both a desiccant at the swab head and proprietary compounds to prevent degradation of the sample during sample collection and preservation. Blood and touch DNA samples were collected from porous and nonporous substrates and stored at elevated temperatures to simulate accelerated time. DNA quantification and STR profile data were used to assess the performance of the swabs. BioSafe ® swab collection resulted in similar DNA yields from blood samples and significantly higher DNA yields from touch samples when compared to collection with cotton swabs. BioSafe ® swabs also resulted in higher DNA integrity during long-term storage, increased STR profile success and improved retention of low-level contributor alleles., (© 2021 American Academy of Forensic Sciences.)

DNA extractions of semen samples commonly utilize dithiothreitol (DTT) to reduce and disrupt disulfide bonds. Although traditional extraction techniques remove DTT before downstream analyses, the forensic DNA community has recently explored Y-screening, direct amplification, and direct cell lysis assays that omit purification but employ reducing agents to lyse spermatozoa. This study examined the impact of residual DTT on downstream processes involving fluorescent dyes. Quantification using Investigator ® Quantiplex HYres revealed a significant increase in the male DNA yield (p = 0.00056) and a >150,000,000-fold increase in the male:human DNA ratio when DTT remained in extracts versus when it was filtered out using a traditional purification method. When DTT was present with Quantifiler™ Trio, the true mean DNA yield for the large autosomal target significantly increased (p = 0.038) and the average reported DNA yields increased 1.1-fold, >9.5-fold, and 1.3-fold for the small autosomal, large autosomal, and male targets, respectively. DTT-spiked DNA standards from both kits were impacted similarly to samples with residual DTT, demonstrating that observed effects were related to DTT and not the extraction method. This study corroborates other reports that DTT adversely affects multiple dyes (e.g., Cy5, Quasar 670, SYBR Green I, TMR, and Mustang Purple ® ). Overall, DTT causes inaccurate quantities and, consequently, inaccurate calculated male:female ratios when used in conjunction with these kits. Thus, implementation of newer direct-to-PCR assays incorporating DTT should either be avoided or used only with carefully evaluated, compatible dyes., (© 2020 American Academy of Forensic Sciences.)

The conformations adopted by the molecular constituents of a supramolecular assembly influence its large-scale order. At the same time, the interactions made in assemblies by molecules can influence their conformations. Here we study this interplay in extended flat nanosheets made from nonnatural sequence-specific peptoid polymers. Nanosheets exist because individual polymers can be linear and untwisted, by virtue of polymer backbone elements adopting alternating rotational states whose twists oppose and cancel. Using molecular dynamics and quantum mechanical simulations, together with experimental data, we explore the design space of flat nanostructures built from peptoids. We show that several sets of peptoid backbone conformations are consistent with their being linear, but the specific combination observed in experiment is determined by a combination of backbone energetics and the interactions made within the nanosheet. Our results provide a molecular model of the peptoid nanosheet consistent with all available experimental data and show that its structure results from a combination of intra- and intermolecular interactions., Competing Interests: The authors declare no conflict of interest.

Peptoid nanosheets are supramolecular protein-mimetic materials that form from amphiphilic polypeptoids with aromatic and ionic side chains. Nanosheets have been studied at the nanometer scale, but the molecular structure has been difficult to probe. We report the use of 13 C- 13 C dipolar recoupling solid-state NMR measurements to reveal the configuration of backbone amide bonds selected by 13 C isotopic labeling of adjacent α-carbons. Measurements on the same molecules in the amorphous state and in nanosheets revealed that amide bonds in the center of the amino block of peptoid (NaeNpe) 7 -(NceNpe) 7 (B28) favor the trans configuration in the amorphous state and the cis configuration in the nanosheet. This unexpected result contrasts with previous NMR and theoretical studies of short solvated peptoids. Furthermore, examination of the amide bond at the junction of the two charged blocks within B28 revealed a mixture of both cis and trans configurational states, consistent with the previously predicted brickwork-like intermolecular organization.

Dipeptide derivative molecules can self-assemble into space-filling nanofiber networks at low volume fractions (<1%), allowing the formation of molecular gels with tunable mechanical properties. The self-assembly of dipeptide-based molecules is reminiscent of pathological amyloid fibril formation by naturally occurring polypeptides. Fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF) is the most widely studied such molecule, but the thermodynamic and kinetic phenomena giving rise to Fmoc-FF gel formation remain poorly understood. We have previously presented evidence that the gelation process is a first order phase transition characterized by low energy barriers to nucleation, short induction times, and rapid quasi-one-dimensional crystal growth, stemming from solvent-solute interactions and highly specific molecular packing. Here, we discuss the phase behavior of Fmoc-FF in different solvents. We find that Fmoc-FF gel formation can be induced in apolar solvents, in addition to previously established pathways in aqueous systems. We further show that in certain solvent systems anisotropic crystals (nanofibers) are an initial metastable state, after which macroscopic crystal aggregates with no preferred axis of growth are formed. The molecular conformation is sensitive to solvent composition during assembly, indicating that Fmoc-FF may be a simple model system to study complex thermodynamic and kinetic phenomena involved in peptide self-assembly.

For the structural characterization methods discussed here, information on molecular conformation and intermolecular organization within nanostructured peptide assemblies is discerned through analysis of solid-state NMR spectral features. This chapter reviews general NMR methodologies, requirements for sample preparation, and specific descriptions of key experiments. An attempt is made to explain choices of solid-state NMR experiments and interpretation of results in a way that is approachable to a nonspecialist. Measurements are designed to determine precise NMR peak positions and line widths, which are correlated with secondary structures, and probe nuclear spin-spin interactions that report on three-dimensional organization of atoms. The formulation of molecular structural models requires rationalization of data sets obtained from multiple NMR experiments on samples with carefully chosen 13 C and 15 N isotopic labels. The information content of solid-state NMR data has been illustrated mostly through the use of simulated data sets and references to recent structural work on amyloid fibril-forming peptides and designer self-assembling peptides.