Search

A novel hybrid material consisted of carbon covered Fe3O4 nanoparticles and MoS2 nanoflower (FCM) was designed and prepared by micelle-assisted hydrothermal methods. Multiple techniques, including X-Ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) were employed to characterize it. The results show that FCM has a flower-like morphology with a 330 nm Fe3O4 core as well as 70 nm highly crystalline MoS2 shell. FCM is superparamagnetic with a saturation magnetization of 35 emu g−1. Then hydrocracking of Canadian bitumen residue (CBR) was applied to estimate its catalytic activity. The results show that FCM exhibits superior catalytic hydrocracking activity compared to bulk MoS2 and commercial oil-dispersed Mo(CO)6 by the same Mo loading. Further measurement by elemental analysis, XPS and XRD reveals that the MoS2 nanoflower with abundant catalytic active sites and covered carbon layer with anti-coke ability donate to the superior upgrading performance. Besides, the catalysts can be easily recovered by the external magnetic field. This work provides a novel kind magnetic nanocatalyst which is potential for slurry-phase hydrocracking applications.

We study the probability of an undetected error for general q-ary codes. We give upper and lower bounds on this quantity, by the Linear Programming and the Polynomial methods, as a function of the length, size, and minimum distance. Sharper bounds are obtained in the important special case of binary Hamming codes. Finally, several examples are given to illustrate the results of this paper.

The high production cost and poor electrochemical performance of polyanionic cathode hinders their industrial application. Here, the authors report large-scale fabrication of sodium vanadium fluorophosphates and in situ construction of their carbon nanocomposites via a mechanochemical protocol.

Acid saccharification of hemicelluloses offers promising pathways to sustainably diversify the revenue of the lignocellulose biorefinery industry. Electrodialysis to separate inorganic acids from acid hydrolysate in the hemicellulose saccharification process could realize the recovery of sulfuric acid, and significantly reduced the chemical consumption than the traditional ion exchange resins method. In this work, the deacidification of corncob acid hydrolysate was conducted by a homemade electrodialysis apparatus. The results showed that: (1) more than 99% of acid can be removed through the electrodialysis process; (2) A non-negligible membrane fouling occurred during the electrodialysis process, which aggravated with the repeated batch running The final global system resistance rose from 15.8 Ω (1st batch) to 43.9 Ω (10th batch), and the treatment ending time was delayed from 120 min (1st batch) to 162 min (10th batch); (4) About 90% of protein, 70% of ferulate acid, and 80% of p-coumarate acid precipitated from the corncob acid hydrolysate during the electrodialysis process. The zeta potential of corncob acid hydrolysate changed from a positive value to a negative value, and an isoelectric point around pH 2.3 was reached. HSQC, FTTR, and GPC, along with SEM and EDS analysis, revealed that the fouling layers mostly consisted of hydrolysates of protein and lignin. The result of HSQC indicated that the membrane foulant may exist in the form of lignin–carbohydrate complexes, as the lignin component of the membrane foulant is in the form of p-coumarate and ferulate. From the result of FTIR, a strong chemical bonding, such as a covalent linkage, existed between the lignin and protein in the membrane foulant. Throughout the electrodialysis process, the increased pH decreased the stability of colloidal particles, including lignin and proteins. Destabilized colloidal particles started to self-aggregate and form deposits on the anion exchange membrane’s surface. Over time, these deposits covered the entire membrane surface and the spaces between the membranes. Eventually, they attached to the surface of the cation exchange membrane. In the end, a suggestion to control and minimize membrane fouling in this process was discussed: lower pH as a process endpoint and a post-treatment method.

Abstract Background The fuel ethanol industry has made tremendous progress in the last decades. Ethanol can be obtained by fermentation using a variety of biomass materials as the feedstocks. However, few studies have been conducted on ethanol utilization by microorganisms. The price of petroleum-derived ethanol, easily made by the hydrolysis of ethylene, is even lower than that of bioethanol. If ethanol can be metabolized by microorganisms to produce value-added chemicals, it will open a new door for the utilization of inexpensive ethanol resources. Results We constructed an engineered Escherichia coli strain which could utilize ethanol as the sole carbon source. The alcohol dehydrogenase and aldehyde dehydrogenase from Aspergillus nidulans was introduced into E. coli and the recombinant strain acquired the ability to grow on ethanol. Cell growth continued when ethanol was supplied after glucose starvation and 2.24 g L−1 of ethanol was further consumed during the shake-flasks fermentation process. Then ethanol was further used for the production of mevalonic acid by heterologously expressing its biosynthetic pathway. Deuterium-labeled ethanol-D6 as the feedstock confirmed that mevalonic acid was synthesized from ethanol. Conclusions This study demonstrated the possibility of using ethanol as the carbon source by engineered E. coli strains. It can serve as the basis for the construction of more robust strains in the future though the catabolic capacity of ethanol should be further improved.

Abstract Microbial fuel cell (MFC) is an environmentally friendly technology for electricity harvesting from a variety of substrates. Microorganisms used as catalysts in the anodic chamber, which are termed as electricigens, play a major role in the operation of MFCs. This review provides an introduction to the currently identified electricigens on their taxonomical groups and electricity producing abilities. The mechanism of electron transfer from electricigens to electrode is highlighted. The performances of pure culture and mixed communities are compared particularly. It has been proved that the electricity generation capacity and the ability to adapt to the complex environment of MFC systems constructed by pure microbial cultures are less than the systems constructed by miscellaneous consortia. However, pure cultures are useful to clarify the electron transfer mechanism at the microbiological level and further reduce the complexity of mixed communities. Future research trends of electricigens in MFCs should be focused on screening, domestication, modification and optimization of multi-strains to improve their electrochemical activities. Although the MFC techniques have been greatly advanced during the past few years, the present state of this technology still requires to be combined with other processes for cost reduction.

Abstract Background Lycopene is a terpenoid pigment that has diverse applications in the food and medicine industries. A prospective approach for lycopene production is by metabolic engineering in microbial hosts, such as Escherichia coli. Isopentenyl diphosphate isomerase (IDI, E.C. 5.3.3.2) is one of the rate-limiting enzymes in the lycopene biosynthetic pathway and one major target during metabolic engineering. The properties of IDIs differ depending on the sources, but under physiological conditions, IDIs are limited by low enzyme activity, short half-life and weak substrate affinity. Therefore, it is important to prepare an excellent IDI by protein engineering. Results Directed evolution strategy (error-prone PCR) was utilized to optimize the activity of Saccharomyces cerevisiae IDI. Using three rounds of error-prone PCR; screening the development of a lycopene-dependent color reaction; and combinatorial site-specific saturation mutagenesis, three activity-enhancing mutations were identified: L141H, Y195F, and W256C. L141H, located near the active pocket inside the tertiary structure of IDI, formed a hydrogen bond with nearby β-phosphates of isopentenylpyrophosphate (IPP). Phe-195 and Cys-256 were nonpolar amino acids and located near the hydrophobic group of IPP, enlarging the hydrophobic scope, and the active pocket indirectly. Purified IDI was characterized and the result showed that the K m of mutant IDI decreased by 10% compared with K m of the parent IDI, and K cat was 28% fold improved compared to that of the original IDI. Results of a fermentation experiment revealed that mutant IDI had a 1.8-fold increased lycopene production and a 2.1-fold increased yield capacity compared to wild-type IDI. Conclusion We prepared an engineered variant of IDI with improved catalytic activity by combining random and site directed mutagenesis. The best mutants produced by this approach enhanced catalytic activity while also displaying improved stability in pH, enhanced thermostability and longer half-life. Importantly, the mutant IDI could play an important role in fed-batch fermentation, being an effective and attractive biocatalyst for the production of biochemicals.

Abstract Background Phloroglucinol is an important chemical which has been successfully produced by engineered Escherichia coli. However, the toxicity of phloroglucinol can enormously inhibit E. coli cell growth and viability, and the productivity is still too low and not economically feasible for industrial applications. Therefore, strain tolerance to toxic metabolites remains a key issue during the production of chemicals using biological processes. Results In the present work, we examined the impact of the native GroESL chaperone system with different overexpression levels on phloroglucinol tolerance and production in E. coli. The groESL gene was cloned into an expression vector, of which expression level was regulated by three different promoters (natural, tac and T7 promoter). Strain tolerance was evaluated employing viable cell counts and phloroglucinol production. In comparison with the control strain, all GroESL overexpressing strains showed good characteristics in cell viability and phloroglucinol synthesis. Strain which overexpressed GroESL under tac promoter was found to show the best tolerance in all of those tested, resulting in a 3.19-fold increase in viable cell numbers compared with control strain of agar-plate culture under the condition of 0.7 g/L phloroglucinol, and a 39.5% increase in phloroglucinol production under fed-batch fermentation. This engineered strain finally accumulated phloroglucinol up to 5.3 g/L in the fed-batch cultivation 10 h after induction, and the productivity was 0.53 g/L/h. To date, the highest phloroglucinol production was achieved in this work compared with the previous reports, which is promising to make the bioprocess feasible from the economical point. Conclusions The data show that appropriate expression level of GroESL plays a critical role in improving phloroglucinol tolerance and production in E. coli, and maybe involve in controlling some aspects of the stress response system through upregulation of GroESL. GroESL overexpression is therefore a feasible and efficient approach for improvement of E. coli tolerance.

Abstract Background d-Lactate is a valued chemical which can be produced by some bacteria including Klebsiella pneumoniae. However, only a few studies have focused on K. pneumoniae for d-lactate production with a significant amount of by-products, which complicated the purification process and decreased the yield of d-lactate. Results Based on the redirection of carbon towards by-product formation, the effects of single-gene and multiple-gene deletions in K. pneumoniae on d-lactate production from glucose via acetolactate synthase (budB), acetate kinase (ackA), and alcohol dehydrogenase (adhE) were tested. Klebsiella pneumoniae mutants had different production behaviours. The accumulation of the main by-products was decreased in the mutants. The triple mutant strain had the most powerful ability to produce optically pure d-lactate from glucose, and was tested with xylose and arabinose as carbon sources. Fed-batch fermentation was also carried out under various aeration rates, and the strain accumulated 125.1 g/L d-lactate with a yield of 0.91 g/g glucose at 2.5 vvm. Conclusions Knocking out by-product synthesis genes had a remarkable influence on the production and yield of d-lactate. This study demonstrated, for the first time, that K. pneumoniae has great potential to convert monosaccharides into d-lactate. The results provide new insights for industrial production of d-lactate by K. pneumoniae.

Abstract Background Phloroglucinol is an important chemical, and the biosynthesis processes which can convert glucose to phloroglucinol have been established. However, due to approximate 80% of the glucose being transformed into undesirable by-products and biomass, this biosynthesis process only shows a low yield with the highest value of about 0.20 g/g. The industrial applications are usually hindered by the low current productivity and yield and also by the high costs. Generally, several different aspects limit the development of phloroglucinol biosynthesis. The yield of phloroglucinol is one of the most important parameters for its bioconversion especially from economic and ecological points of view. The in vitro biosynthesis of bio-based chemicals, is a flexible alternative with potentially high-yield to in vivo biosynthetic technology. Results By comparing the activity of acetyl-CoA synthetase (ACS) from Escherichia coli and Acetobacter pasteurianus, the highly active ACS2 was identified in A. pasteurianus. Acetyl-CoA carboxylase (ACC) from Acinetobacter calcoaceticus and phloroglucinol synthase (PhlD) from Pseudomonas fluorescens pf-5 were expressed and purified. Acetate was successfully transformed into phloroglucinol by the combined activity of above-mentioned enzymes and required cofactor. After optimization of the in vitro reaction system, phloroglucinol was then produced with a yield of nearly 0.64 g phloroglucinol/g acetic acid, which was equal to 91.43% of the theoretically possible maximum. Conclusions In this work, a novel in vitro synthetic system for a highly efficient production of phloroglucinol from acetate was demonstrated. The system’s performance suggests that in vitro synthesis of phloroglucinol has some advantages and is potential to become a feasible industrial alternative. Based on the results presented herewith, it is believed that in vitro biosystem will provide a feasible option for production of important industrial chemicals from acetate, which could work as a versatile biosynthetic platform.

The authors of this article [1] wish to draw the readers’ attention to their closely related paper, published in RSC Advances [2] which should have been cited in this article. The authors regret that there is unattributed overlap in text describing the construction of the plasmid coding for the biosynthetic pathway because of the commonly used research strategies between this article [1] and similar work presented in RSC Advances, although this does not affect the main scientific conclusion in this study.

Poly(3-hydroxypropionate) (P3HP) is a thermoplastic with great compostability and biocompatibility, and can be produced through several biosynthetic pathways, in which the glycerol pathway achieved the highest P3HP production. However, exogenous supply of vitamin B12 was required to maintain the activity of glycerol dehydratase, resulting in high production cost. To avoid the addition of VB12, we have previously constructed a P3HP biosynthetic route with β-alanine as intermediate, and the present study aimed to improve the P3HP production of this pathway. L-aspartate decarboxylase PanD was found to be the rate-limiting enzyme in the β-alanine pathway firstly. To improve the pathway efficiency, PanD was screened from four different sources (Escherichia coli, Bacillus subtilis, Pseudomonas fluorescens, and Corynebacterium glutamicum). And PanD from C. glutamicum was found to have the highest activity, the P3HP production was improved in flask cultivation with this enzyme. To further improve the production, the host strain was screened and the culture condition was optimized. Under optimal conditions, production and content of P3HP reached to 10.2 g/L and 39.1% (wt/wt [cell dry weight]) in an aerobic fed-batch fermentation. To date, this is the highest P3HP production without VB12.

With the methodical advancement of the Energy Internet Marketing Service System across each network province in accordance with the blueprint, the company's marketing business development has ushered into the digital era, thereby necessitating elevated benchmarks for the system's security, reliability, cost-effectiveness, agility, and operational efficiency. Through an exhaustive scrutiny encompassing marketing business dynamics, technical architecture intricacies, and system operational modalities, the imperative arises for the replacement of the Oracle database and the advocacy for a feasibility study exploring the migration to a localized database system. Within this framework, the grid marketing service system's domestic database migration project confronts myriad challenges and risks. To ensure the seamless implementation of the project, this paper embarks from the vantage point of the project's specific context, amalgamating well-established risk management paradigms and methodologies. Leveraging the trapezoidal fuzzy number and material element topology computational model, potential risk factors are methodically discerned. Subsequently, the project's overall risk landscape is meticulously charted through the lens of this model, culminating in the formulation of targeted risk response strategies and a comprehensive feasibility assessment predicated upon the weighted ranking of risk factors. Ultimately, an array of corresponding risk response measures are delineated, spanning organizational, managerial, scheduling, and technical domains, thereby ensuring the seamless, steadfast, and efficacious implementation of the project, poised to furnish resolute support for its sustained operation post-migration. The research findings of this paper not only provide robust assurance for the feasibility of the migration project concerning the homegrown database system of the grid marketing service system but also offer invaluable theoretical insights and pragmatic wisdom poised to enrich the execution of analogous endeavors. [ABSTRACT FROM AUTHOR]