Search

The escalating utilization of plastics in daily life has resulted in pervasive environmental pollution and consequent health hazards. The challenge of detecting and capturing microplastics, which are imperceptible to the naked eye, is exacerbated by their diminutive size, hydrophobic surface properties, and capacity to absorb organic compounds. This study focuses on the application of peptides, constituted of specific amino acid sequences, and microneedles for the rapid and selective identification of microplastics. Peptides, due to their smaller size and greater environmental stability compared with antibodies, emerge as a potent solution to overcome the limitations inherent in existing detection methodologies. To immobilize peptides onto microneedles, this study employed microneedles embedded with gold nanorods, augmenting them with sulfhydryl (SH) groups at the peptides’ termini. The sensor developed through this methodology exhibited efficient peptide binding to the microneedle tips, thereby facilitating the capture of microplastics. Raman spectroscopy was employed for the detection of microplastics, with the results demonstrating successful attachment to the microneedles. This novel approach not only facilitates localized analysis but also presents a viable strategy for the detection of microplastics across diverse environmental settings.

In this paper, we have fabricated non-volatile memory resistive switching (RS) devices and analyzed analog memristive characteristics using lateral electrodes with mesoporous silica–titania (meso-ST) and mesoporous titania (meso-T) layers. For the planar-type device having two parallel electrodes, current–voltage (I–V) curves and pulse-driven current changes could reveal successful long-term potentiation (LTP) along with long-term depression (LTD), respectively, by the RS active mesoporous two layers for 20~100 μm length. Through mechanism characterization using chemical analysis, non-filamental memristive behavior unlike the conventional metal electroforming was identified. Additionally, high performance of the synaptic operations could be also accomplished such that a high current of 10−6 Amp level could occur despite a wide electrode spacing and short pulse spike biases under ambient condition with moderate humidity (RH 30~50%). Moreover, it was confirmed that rectifying characteristics were observed during the I–V measurement, which was a representative feature of dual functionality of selection diode and the analog RS device for both meso-ST and meso-T devices. The memristive and synaptic functions along with the rectification property could facilitate a chance of potential implementation of the meso-ST and meso-T devices to neuromorphic electronics platform.

Paget’s Disease of Bone (PDB) is a metabolic bone disease that is characterized by dysregulated osteoclast function leading to focal abnormalities of bone remodeling. It can lead to pain, fracture, and bone deformity. G protein-coupled receptor kinase 3 (GRK3) is an important negative regulator of G protein-coupled receptor (GPCR) signaling. GRK3 is known to regulate GPCR function in osteoblasts and preosteoblasts, but its regulatory function in osteoclasts is not well defined. Here, we report that Grk3 expression increases during osteoclast differentiation in both human and mouse primary cells and established cell lines. We also show that aged mice deficient in Grk3 develop bone lesions similar to those seen in human PDB and other Paget’s Disease mouse models. We show that a deficiency in Grk3 expression enhances osteoclastogenesis in vitro and proliferation of hematopoietic osteoclast precursors in vivo but does not affect the osteoclast-mediated bone resorption function or cellular senescence pathway. Notably, we also observe decreased Grk3 expression in peripheral blood mononuclear cells of patients with PDB compared with age- and gender-matched healthy controls. Our data suggest that GRK3 has relevance to the regulation of osteoclast differentiation and that it may have relevance to the pathogenesis of PDB and other metabolic bone diseases associated with osteoclast activation.

Abstract The nitrous oxide (N2O) emission of from arable soil following the application of manure is expected to vary by different animal manure types used. This study was conducted to determine the relationship between the type of animal manure used to amend soil and the amount of N2O emitted during the cultivation of sweet potato (Ipomoea batatas). An additional objective was to study the characteristics of nitrogen (N) and carbon (C) in different animal manures. Composted manures from chickens, cows, and pigs were applied to the soil at rates of 0, 10, and 20 Mg ha−1, respectively. The availability and concentration of N and C varied by manure type. The concentration of NH4 + was greater in pig manure (4638 mg kg−1) than in chicken (551 mg kg−1) and cow manure (147 mg kg−1). The mean cumulative N2O emission rate across soil application rates was also the highest with pig manure (11.9 kg ha−1 year−1), followed by chicken and cow manure, with emission rates of 10.8 and 10.1 kg ha−1 year−1, respectively. The majority of N2O measured during the sweet-potato-growing season was produced from aerobic nitrification. Dissolved organic carbon (DOC) concentrations in animal manures did not affect cumulative N2O emission rates, and no significant relationship was observed throughout the growing season between the concentration of DOC in soil and daily N2O emission. Cumulative N2O emission rates depended on the type of animal manure and might be governed by NH4 + concentration, rather than by total N concentration in animal manure type.

Metals, including copper (Cu), iron (Fe), and zinc (Zn), are associated with nitrous oxide (N2O) production processes, such as nitrification and denitrification. This study aimed to elucidate the effects of Cu, Fe, and Zn on N2O emissions and to determine cumulative N2O emission and crop yields from upland soils. Metals were applied at a rate of 20 kg ha−1 in upland soil supporting maize (Zea mays L.) growth in 2018 and 2019. While the mean value of cumulative N2O emissions across both years was 5.19 kg N2O ha−1 yr−1 for the control soil, those of soil treated with Cu, Fe, and Zn were 3.37, 2.48, and 4.82 kg N2O ha−1 yr−1, respectively. Ammonium (NH4+) concentration in soil was highest after Fe application, and nitrate (NO3−) concentration was lowest. The copy number of the amoA gene related to NH4+ oxidation was lowest after Fe enhancement, implying that nitrification was inhibited. Furthermore, N2O emission decreased with Cu addition because the copy number of the nosZ gene associated with N2O reduction to N2 was the highest. Because Cu and Fe decreased yield-scaled N2O emission, the application of either metal could reduce N2O emission per unit area of maize production, suggesting that both metals are beneficial soil amendments for reducing N2O emissions while maintaining maize yield.

Recently, various waste microplastics sensors have been introduced in response to environmental and biological hazards posed by waste microplastics. In particular, the detrimental effects of nano-sized plastics or nanoplastics have been reported to be severe. Moreover, there have been many difficulties for sensing microplastics due to the limited methodologies for selectively recognizing nanoplastics. In this study, a customized gold nanoparticles (Au NPs) based localized surface plasmon resonance (LSPR) system having bio-mimicked peptide probes toward the nanoplastics was demonstrated. The specific determination through the oligo-peptide recognition was accomplished by chemical conjugation both on the LSPR chip’s 40~50 nm Au NPs and sandwiched 5 nm Au NPs, respectively. The peptide probe could selectively bind to polystyrene (PS) nanoplastics in the forms of fragmented debris by cryo-grinding. A simple UV-Vis spectrophotometer was used to identify the LSPR sensing by primarily measuring the absorbance change and shift of absorption peak. The sandwich-binding could increase the LSPR detection sensitivity up to 60% due to consecutive plasmonic effects. In addition, microwave-boiled DI water inside of a styrofoam container was tested for putative PS nanoplastics resource as a real accessible sample. The LSPR system could be a novel protocol overcoming the limitations from conventional nanoplastic detection.

In this study, cortisol, which is a key stress hormone, could be detected sensitively via the colorimetric assay of a polycarbonate (PC) and glass substrate by the sandwich assay of cortisol monoclonal antibody (c-Mab) and cortisol specific binding aptamer (c-SBA). A highly sensitive change in colorimetry with a limit of detection (LOD) of cortisol of 100 fM could be attained on the optically transparent substrate using the antibody aptamer sandwich (AAS) assay by corresponding stacks of 5 nm gold nanoparticles (Au NPs). The Au NPs were conjugated by the c-SBA and the c-Mab was tethered on the PC and glass substrates. For the AAS method, a simple UV-Vis spectrophotometer was adopted to quantify the cortisol concentrations at an absorbance wavelength of 520 nm. Therefore, this study demonstrates the versatility of the AAS method to measure very low concentrations of cortisol in diagnostic applications.

Square-shaped or rectangular nanoparticles (NPs) of lanthanum oxide (LaOx) were synthesized and layered by convective self-assembly to demonstrate an analog memristive device in this study. Along with non-volatile analog memory effect, selection diode property could be co-existent without any implementation of heterogeneous multiple stacks with ~1 μm thick LaOx NPs layer. Current–voltage (I–V) behavior of the LaOx NPs resistive switching (RS) device has shown an evolved current level with memristive behavior and additional rectification functionality with threshold voltage. The concurrent memristor and diode type selector characteristics were examined with electrical stimuli or spikes for the duration of 10–50 ms pulse biases. The pulsed spike increased current levels at a read voltage of +0.2 V sequentially along with ±7 V biases, which have emulated neuromorphic operation of long-term potentiation (LTP). This study can open a new application of rare-earth LaOx NPs as a component of neuromorphic synaptic device.

Compared with silicon and silicon carbide, diamond has superior material parameters and is therefore suitable for power switching devices. Numerical simulation is important for predicting the electric characteristics of diamond devices before fabrication. Here, we present numerical simulations of p-type diamond pseudo-vertical Schottky barrier diodes using various mobility models. The constant mobility model, based on the parameter μconst, fixed the hole mobility absolutely. The analytic mobility model resulted in temperature- and doping concentration-dependent mobility. An improved model, the Lombard concentration, voltage, and temperature (CVT) mobility model, considered electric field-dependent mobility in addition to temperature and doping concentration. The forward voltage drop at 100 A/cm2 using the analytic and Lombard CVT mobility models was 2.86 and 5.17 V at 300 K, respectively. Finally, we used an empirical mobility model based on experimental results from the literature. We also compared the forward voltage drop and breakdown voltage of the devices, according to variations in p- drift layer thickness and cathode length. The device successfully achieved a low specific on-resistance of 6.8 mΩ∙cm2, a high breakdown voltage of 1190 V, and a high figure-of-merit of 210 MW/cm2.

Toluene gas was successfully measured at room temperature using a device microfabricated by a nanoimprinting method. A highly uniform nanoporous thin film was produced with a dense array of titania (TiO2) pores with a diameter of 70~80 nm using this method. This thin film had a Pd/TiO2 nanoporous/SiO2/Si MIS layered structure with Pd-TiO2 as the catalytic sensing layer. The nanoimprinting method was useful in expanding the TiO2 surface area by about 30%, as confirmed using AFM and SEM imaging. The measured toluene concentrations ranged from 50 ppm to 200 ppm. The toluene was easily detected by changing the Pd/TiO2 interface work function, resulting in a change in the I-V characteristics.