Search

FluorAcryl 3298 (FA) is a UV-curable fluoroacrylate polymer commonly employed as a chemically resistant, hydrophobic, and oleophobic coating. Here, FA was used in a cleanroom-based microstructuring process to fabricate hydrophilic-in-hydrophobic (HiH) micropatterned surfaces containing femtoliter-sized well arrays. A short protocol involving direct UV photopatterning, an etching step, and final recovery of the hydrophobic properties of the polymer produced patterned substrates with micrometer resolution. Specifically, HiH microwell arrays were obtained with a well diameter of 10 μm and various well depths ranging from 300 nm to 1 μm with high reproducibility. The 300 nm deep microdroplet array (MDA) substrates were used for digital immunoassays, which presented a limit of detection in the attomolar range. This demonstrated the chemical functionality of the hydrophilic and hydrophobic surfaces. Furthermore, the 1 μm deep wells could efficiently capture particles such as bacteria, whereas the 300 nm deep substrates or other types of flat HiH molecular monolayers could not. Capturing a mixture of bacteria expressing red- and green-fluorescent proteins, respectively, served as a model for screening and selection of specific phenotypes using FA-MDAs. Here, green-fluorescent bacteria were specifically selected by overlaying a solution of gelatin methacryloyl (GelMA) mixed with a photoinitiator and using a high-magnification objective, together with custom pinholes, in a common fluorescence microscope to cross-link the hydrogel around the bacteria of interest. In conclusion, due to the straightforward processing, versatility, and low-price, FA is an advantageous alternative to more commonly used fluorinated materials, such as CYTOP or Teflon-AF, for the fabrication of HiH microwell arrays and other biphilic microstructures.

In the face of the COVID-19 pandemic, the need for rapid serological tests that allow multiplexing emerged, as antibody seropositivity can instruct about individual immunity after an infection with SARS-CoV-2 or after vaccination. As many commercial antibody tests are either time-consuming or tend to produce false negative or false positive results when only one antigen is considered, we developed an automated, flow-based chemiluminescence microarray immunoassay (CL-MIA) that allows for the detection of IgG antibodies to SARS-CoV-2 receptor-binding domain (RBD), spike protein (S1 fragment), and nucleocapsid protein (N) in human serum and plasma in less than 8 min. The CoVRapid CL-MIA was tested with a set of 65 SARS-CoV-2 serology positive or negative samples, resulting in 100% diagnostic specificity and 100% diagnostic sensitivity, thus even outcompeting commercial tests run on the same sample set. Additionally, the prospect of future quantitative assessments (i.e., quantifying the level of antibodies) was demonstrated. Due to the fully automated process, the test can easily be operated in hospitals, medical practices, or vaccination centers, offering a valuable tool for COVID-19 serosurveillance. Graphical abstract., (© 2021. The Author(s).)

The diagnosis of autoimmune polyglandular syndrome (APS) types 1/2 is difficult due to their rarity and nonspecific clinical manifestations. APS-1 development can be identified with assays for autoantibodies against cytokines, and APS-2 development with organ-specific antibodies. In this study, a microarray-based multiplex assay was proposed for simultaneous detection of both organ-specific (anti-21-OH, anti-GAD-65, anti-IA2, anti-ICA, anti-TG, and anti-TPO) and APS-1-specific (anti-IFN-ω, anti-IFN-α-2a, and anti-IL-22) autoantibodies. Herein, 206 serum samples from adult patients with APS-1, APS-2, isolated autoimmune endocrine pathologies or non-autoimmune endocrine pathologies and from healthy donors were analyzed. The prevalence of autoantibodies differed among the groups of healthy donors and patients with non-, mono- and multi-endocrine diseases. APS-1 patients were characterized by the presence of at least two specific autoantibodies (specificity 99.5%, sensitivity 100%). Furthermore, in 16 of the 18 patients, the APS-1 assay revealed triple positivity for autoantibodies against IFN-ω, IFN-α-2a and IL-22 (specificity 100%, sensitivity 88.9%). No anti-cytokine autoantibodies were found in the group of patients with non-APS-1 polyendocrine autoimmunity. The accuracy of the microarray-based assay compared to ELISA for organ-specific autoantibodies was 88.8-97.6%. This multiplex assay can be part of the strategy for diagnosing and predicting the development of APS.

G-protein-coupled receptors (GPCRs), especially chemokine receptors, are ideal targets for monoclonal antibody drugs. Considering the special multi-pass transmembrane structure of GPCR, it is often a laborious job to obtain antibody information about off-targets and epitopes on antigens. To accelerate the process, a rapid and simple method needs to be developed. The split-ubiquitin-based yeast two hybrid system (YTH) was used as a blue script for a new method. By fusing with transmembrane peptides, scFv antibodies were designed to be anchored on the cytomembrane, where the GPCR was co-displayed as well. The coupled split-ubiquitin system transformed the scFv-GPCR interaction signal into the expression of reporter genes. By optimizing the topological structure of scFv fusion protein and key elements, including signal peptides, transmembrane peptides, and flexible linkers, a system named Antigen-Antibody Co-Display (AACD) was established, which rapidly detected the interactions between antibodies and their target GPCRs, CXCR4 and CXCR5, while also determining the off-target antibodies and antibody-associated epitopes. The AACD system can rapidly determine the association between GPCRs and their candidate antibodies and shorten the research period for off-target detection and epitope identification. This system should improve the process of GPCR antibody development and provide a new strategy for GPCRs antibody screening.

Collection of nasopharyngeal samples using swabs followed by the transfer of the virus into a solution and an RNA extraction step to perform reverse transcription polymerase chain reaction (PCR) is the primary method currently used for the diagnosis of COVID-19. However, the need for several reagents and steps and the high cost of PCR hinder its worldwide implementation to contain the outbreak. Here, we report a cotton-tipped electrochemical immunosensor for the detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus antigen. Unlike the reported approaches, we integrated the sample collection and detection tools into a single platform by coating screen-printed electrodes with absorbing cotton padding. The immunosensor was fabricated by immobilizing the virus nucleocapsid (N) protein on carbon nanofiber-modified screen-printed electrodes which were functionalized by diazonium electrografting. The detection of the virus antigen was achieved via swabbing followed by competitive assay using a fixed amount of N protein antibody in the solution. A square wave voltammetric technique was used for the detection. The limit of detection for our electrochemical biosensor was 0.8 pg/mL for SARS-CoV-2, indicating very good sensitivity for the sensor. The biosensor did not show significant cross-reactivity with other virus antigens such as influenza A and HCoV, indicating high selectivity of the method. Moreover, the biosensor was successfully applied for the detection of the virus antigen in spiked nasal samples showing excellent recovery percentages. Thus, our electrochemical immunosensor is a promising diagnostic tool for the direct rapid detection of the COVID-19 virus that requires no sample transfer or pretreatment.

Immobilizing antibodies on the nitrocellulose membrane is an important step to increase the sensitivity of the Lateral Flow Test strip for detecting pathogenic antigen. In our research, the fusion protein between nitrocellulose-binding anchor protein 3-Helix - a protein that has a strong affinity to nitrocellulose membrane and protein A - a protein that can bind to the Fc tail of IgG antibody was generated. This fusion protein was expected to help IgG antibodies to be more strongly binding and oriented immobilized onto the nitrocellulose membrane. The recombinant vector pET22b-proA and pET22b-proA-3-Helix coded for protein A and protein A-3-Helix were cloned. These proteins were overexpressed in BL21 and purified by immobilized metal affinity chromatography with purity above 90%. The purified protein was used to evaluate the orientation binding on nitrocellulose membranes by lateral flow challenge. Results showed that protein A-3-Helix binding to nitrocellulose membrane was better than that of protein A. The former protein increased antibody binding and stereochemical immobilizing onto nitrocellulose membrane compared to its protein A counterpart. In summary, we have succeeded in cloning, purifying, and characterizing a dual-head recombinant protein A and protein A-3-Helix. The results show the potential application of protein A-3-Helix in the immobilizing antibody on the test strip., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Coronavirus disease (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) was classified as a pandemic by the World Health Organization and has caused over 550,000 deaths worldwide as of July 2020. Accurate and scalable point-of-care devices would increase screening, diagnosis, and monitoring of COVID-19 patients. Here, we demonstrate rapid label-free electrochemical detection of SARS-CoV-2 antibodies using a commercially available impedance sensing platform. A 16-well plate containing sensing electrodes was pre-coated with receptor binding domain (RBD) of SARS-CoV-2 spike protein, and subsequently tested with samples of anti-SARS-CoV-2 monoclonal antibody CR3022 (0.1 μg/ml, 1.0 μg/ml, 10 μg/ml). Subsequent blinded testing was performed on six serum specimens taken from COVID-19 and non-COVID-19 patients (1:100 dilution factor). The platform was able to differentiate spikes in impedance measurements from a negative control (1% milk solution) for all CR3022 samples. Further, successful differentiation and detection of all positive clinical samples from negative control was achieved. Measured impedance values were consistent when compared to standard ELISA test results showing a strong correlation between them (R 2 =0.9). Detection occurs in less than five minutes and the well-based platform provides a simplified and familiar testing interface that can be readily adaptable for use in clinical settings., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Autoantibodies are key biomarkers in clinical diagnosis of autoimmune diseases routinely detected by enzyme-linked immunosorbent assays (ELISAs). However, the complexity of these assays is limiting their use in routine diagnostics. Fiber optic-surface plasmon resonance (FO-SPR) can overcome these limitations, but improved surface chemistries are still needed to guarantee detection of autoantibodies in complex matrices. In this paper, we describe the development of an FO-SPR immunoassay for the detection of autoantibodies in plasma samples from immune-mediated thrombotic thrombocytopenic purpura (iTTP) patients. Hereto, hexahistidine-tagged recombinant ADAMTS13 (rADAMTS13-His 6 ) was immobilized on nitrilotriacetic acid (NTA)-coated FO probes chelated by cobalt (Co(III)) and exposed to anti-ADAMTS13 autoantibodies. Initial studies were performed to optimize rADAMTS13-His 6 immobilization and to confirm the specificity of the immunoassay for detection of anti-ADAMTS13 autoantibodies with FO-SPR. The performance of the immunoassay was then evaluated by comparing Co(III)- and nickel (Ni(II))-NTA stabilized surfaces, confirming the stable immobilization of the antigen in Co(III)-NTA-functionalized FO probes. A calibration curve was prepared with a dilution series of a cloned human anti-ADAMTS13 autoantibody in ADAMTS13-depleted plasma resulting in an average interassay coefficient of variation of 7.1% and a limit of detection of 0.24 ng/mL. Finally, the FO-SPR immunoassay was validated using seven iTTP patient plasma samples, resulting in an excellent correlation with an in-house-developed ELISA ( r = 0.973). In summary, the specificity and high sensitivity in combination with a short time-to-result (2.5 h compared to 4-5 h for a regular ELISA) make the FO-SPR immunoassay a powerful assay for routine diagnosis of iTTP and with extension for any other autoimmune disease.

An ultrasensitive electrochemiluminescence biosensor was established based on the Zn-MOF/GO nanocomposite. Ag(I)-embedded DNA complexes were used as a signal amplification reagent. In this work, 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (TCPP) and Zn 2+ were integrated into a porphyrin paddlewheel framework (Zn-MOF) by a hydrothermal method. The synthesized Zn-MOF material has electrochemiluminescence property, and the luminescence intensity is improved after being composited with graphene oxide (GO). Based on the composite material, we constructed an ultrasensitive ECL biosensor for the p53 antibody detection. The composite material acted as an admirable substrate and then loaded plenty of p53 antigens to recognize the target (p53 antibody) accurately. Because of the bridging effect of streptavidin and biotin-conjugated goat anti-rabbit IgG (bio-ab2), the rich-C DNA with positive correlation with the target was modified on the electrode and then captured the co-reactant accelerator Ag + to amplify the signal. Therefore, the ECL biosensor response increases with increasing p53 antibody concentration. In the range 0.1 fg/mL-0.01 ng/mL, the response signal of the biosensor has a good linear relationship with the p53 antibody concentration. The detection limit is 0.03 fg/mL (S/N = 3). Impressively, the biosensor not only featured high sensitivity, good stability, and excellent specificity for the detection of p53 antibody, but also provides a new way for early detection of cancer. Graphical abstract Schematic representation of the electrochemiluminescence sensor based on a Zn-MOF/GO nanocomposite, which can be applied to the determination of p53 antibody.

Background and Purpose : The humoral immune response in cancer patients can be used for early detection of the disease. Autoantibodies raised against tumor-associated antigens (TAAs) are promising clinical biomarkers for reliable cancer diagnosis, prognosis, and therapy monitoring. In this study, an electrochemical disposable multiplexed immunosensing platform able to integrate difficult- and easy-to-express colorectal cancer (CRC) TAAs is reported for the sensitive determination of eight CRC-specific autoantibodies. Methods : The electrochemical immunosensing approach involves the use of magnetic microcarriers (MBs) as solid supports modified with covalently immobilized HaloTag fusion proteins for the selective capture of specific autoantibodies. After magnetic capture of the modified MBs onto screen-printed carbon working electrodes, the amperometric responses measured using the hydroquinone (HQ)/H 2 O 2 system were related to the levels of autoantibodies in plasma. Results : The biosensing platform was applied to the analysis of autoantibodies against 8 TAAs described for the first time in this work in plasma samples from healthy asymptomatic individuals (n=3), and patients with high-risk of developing CRC (n=3), and from patients already diagnosed with colorectal (n=3), lung (n=2) or breast (n=2) cancer. The developed bioplatform demonstrated an improved discrimination between CRC patients and controls (asymptomatic healthy individuals and breast and lung cancer patients) compared to an ELISA-like luminescence test. Conclusions : The proposed methodology uses a just-in-time produced protein in a simpler protocol, with low sample volume, and involves cost-effective instrumentation, which could be used in a high-throughput manner for reliable population screening to facilitate the detection of early CRC patients at affordable cost., Competing Interests: Competing Interests: The authors have declared that no competing interest exists., (© The author(s).)

Directed evolution is a proven approach to fine tune or modify biomolecules for various applications ranging from research to industry. The process of evolution requires methods that are capable of not only generating genetic diversity but also to distinguish the variants of desired characteristics. One method that is synonymous with directed evolution of proteins is phage display. Here, we present a protocol describing the application of magnetic nanoparticles coupled with a processor to carry out the identification of monoclonal antibodies (mAbs) from a diverse antibody library via phage display. Target antigens are coupled to magnetic nanoparticles as the solid phase for the isolation of the binding mAbs via affinity. A gradual enrichment in clones would result in increasing ELISA readouts with increasing rounds of panning. During monoclonal level analysis, positivity can be deduced with comparison to background and controls. The biopanning process can also be adopted for the directed evolution of enzymes, scaffold proteins or even peptides., (© 2020 Elsevier Inc. All rights reserved.)

From whole tissues to single-cell lysate, heterogeneous immunoassays are widely utilized for analysis of protein targets in complex biospecimens. Recently, benzophenone-functionalized hydrogel scaffolds have been used to immobilize target protein for immunoassay detection with fluorescent antibody probes. In benzophenone-functionalized hydrogels, multiplex target detection occurs via serial rounds of chemical stripping (incubation with sodium-dodecyl-sulfate (SDS) and β-mercaptoethanol at 50-60 °C for ≥1 h), followed by reprobing (interrogation with additional antibody probes). Although benzophenone facilitates covalent immobilization of proteins to the hydrogel, we observe 50% immunoassay signal loss of immobilized protein targets during stripping rounds. Here, we identify and characterize signal loss mechanisms during stripping and reprobing. We posit that loss of immobilized target is responsible for ≥50% of immunoassay signal loss, and that target loss is attributable to disruption of protein immobilization by denaturing detergents (SDS) and incubation at elevated temperatures. Furthermore, our study suggests that protein losses under non-denaturing conditions are more sensitive to protein structure (i.e., hydrodynamic radius), than to molecular mass (size). We formulate design guidance for multiplexed in-gel immunoassays, including that low-abundance proteins be immunoprobed first, even when targets are covalently immobilized to the gel. We also recommend careful scrutiny of the order of proteins targets detected via multiple immunoprobing cycles, based on the protein immobilization buffer composition.

As a well-known allergenic indicator in kidney beans, lectins have always been the serious threats for human health. Herein, we introduced a new label-free voltammetric immunosensor for the direct determination of kidney bean lectin (KBL) with potential allergenic activity. Gold nanoparticles-polyethyleneimine-multiwalled carbon nanotubes nanocomposite was one-pot synthesized and modified onto the glass carbon electrode to enhance catalytic currents of oxygen reduction reaction. The KBL polyclonal antibody, acquired from rabbit immunization, was orientedly immobilized on the electrode modified with recombinant staphylococcal protein A via fragment crystallizable (Fc) region of antibody. Under the optimized condition, the immunosensor displayed a good linear response (R 2  = 0.978) to KBL with a range from 0.05 to 100 μg/mL and a detection limit of 0.023 μg/mL. Simultaneously, the immunosensor exhibited well selectivity, interference-resistant ability, stability (4 °C) and reproducibility. Compared with the conventional enzyme-linked immunosorbent assay (ELISA) method, the immunosensor was successfully applied to quantify allergenic activity of lectin in raw and cooked (boiled for 30 min) kidney bean milk samples. This new approach provides new perspectives both for rapid quantification of lectin in kidney beans-derived foodstuffs and as a real-time monitoring tool for the allergenic potential during the whole production and consumption process., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Lymph node follicles capture and retain antigens to induce germinal centers and long-lived humoral immunity. However, control over antigen retention has been limited. Here we discovered that antigen conjugated to nanoparticle carriers of different sizes impacts the intralymph node transport and specific cell interaction. We found that follicular dendritic cell (FDC) networks determine the intralymph node follicle fate of these nanoparticles by clearing smaller ones (5-15 nm) within 48 h and retaining larger ones (50-100 nm) for over 5 weeks. The 50-100 nm-sized nanoparticles had 175-fold more delivery of antigen at the FDC dendrites, 5-fold enhanced humoral immune responses of germinal center B cell formation, and 5-fold more antigen-specific antibody production over 5-15 nm nanoparticles. Our results show that we can tune humoral immunity by simply manipulating the carrier size design to produce effectiveness of vaccines.

Here, we develop bifunctional ligand-engineered gold nanoclusters (AuNCs) as signal amplifying reporters for multimode imaging. Modified streptavidin (SA) and biotin alkyl acid-based ligands were applied to AuNCs to form AuNC-SA and AuNC-biotin. The zwitterionic ligands promoted bioassembly and avoided nonspecific adsorption. The AuNCs resisted aggregation-induced quenching and showed strong emission benefited from biological self-assembly. The engineered AuNCs featured stable emission, a large two-photon absorption cross section, long fluorescence lifetime, and good biocompatibility. Thus, cell-expressed antigen-induced protein-binding events were effectively converted into signals from the biological assemble of AuNCs. We performed a comprehensive assay of specific antigens and the cell structure, through one-photon imaging, two-photon imaging, and fluorescence lifetime imaging of AuNCs in a simple, sensitive, and reliable way.

Heroin, marijuana and cocaine are widely abused drugs. Their use can be readily detected by analyzing urine for the metabolites morphine (MOR), tetrahydrocannabinol (THC) or benzoylecgonine (BZC). A multiplex immunosensor is described here for detection of MOR, THC and BZC using screen printed carbon array electrodes modified with gold nanoparticles. Antibodies against MOR, THC and BZC were immobilized on eight electrodes in a sensor array simultaneously, and a competitive assay was used for the detection. The free analytes in the sample compete with bovine serum albumin-conjugated analytes for the immobilized antibodies on the sensor surface. The array is capable of detecting the three drugs simultaneously within 20-40 min. The method has a high sensitivity, with detection limits as low as 1.2, 7.0, and 8.0 pg.mL -1 for MOR, THC and BZC, respectively. Cross reactivity testing was preformed to monitor any nonspecific binding. The results revealed good selectivity. Urine samples were spiked with the 3 drugs and tested with the multiplexed immunosensor. Recovery percentages ranged between 88 to 115%. Graphical abstract Schematic presentation of the multiplexed immunosensor for drugs of abuse,viz. tetrahydrocannabinol (THC), morphine (MOR), and benzoylecgonine (BZC)) by using an array of modified electrodes.

Described in several epithelial cancer cells, Tn- (GalNAcα1-O-Ser/Thr) and T- (Galβ3GalNAcα1-O-Ser/Thr) antigens are examples of tumor-associated antigens. Increased expression of Tn- and T-antigens is associated with tumor invasion and metastasis, and patients with high concentration of anti-Tn and anti-T antibodies have a more benign evolution of pathology. Asialofetuin (ASF) and ovine submaxillary mucin (OSM) are two glycoproteins that expose T- and Tn-antigen, respectively. In this work, using ASF or OSM we affinity-purified anti-T and anti-Tn antibodies from normal human plasma and tested their ability to specifically recognize tumor human tissues. Whereas purified anti-T antibodies (purity degree increase of 127-fold, and 22% recovery) were mainly IgG, for purified anti-Tn antibodies (purity degree enhancement of 125-fold, and 26% yield) the IgM fraction was predominant over the IgG one. IgG2 subclass was significantly enriched in both purified antibody samples. Purified antibodies did not bind normal human tissue (0/42), although recognized malignant tissues from different origin such as colon carcinoma (11/77 by anti-Tn; 7/79 by anti-T), breast carcinoma (10/23 by anti-Tn; 7/23 by anti-T), and kidney carcinoma (45/51 by anti-Tn; 42/51 by anti-T). Our results suggest that purified human anti-Tn and anti-T antibodies have a potential as anti-tumor therapeutic agents; restoring their levels in human sera could positively affect the evolution of patients with epithelial tumor pathologies.

Direct chemical labeling of antibody produces molecules with poorly defined modifications. Use of a small antibody-binding protein as an adapter can simplify antibody functionalization by forming a specific antibody-bound complex and introducing site-specific modifications. To stabilize a noncovalent antibody complex that may be used without chemical crosslinking, a bivalent antibody-binding protein is engineered with an improved affinity of interaction by joining two Z domains with a conformationally flexible linker. The linker is essential for the increase in affinity because it allows simultaneous binding of both domains. The molecule is further circularized using a split intein, creating a novel adapter protein ("lasso"), which binds human immunoglobulin G1 (IgG1) with K D  = 0.53 n m and a dissociation rate that is 55- to 84-fold slower than Z. The lasso contains a unique cysteine for conjugation with a reporter and may be engineered to introduce other functional groups, including a biotin tag and protease recognition sequences. When used in enzyme-linked immunosorbent assay (ELISA), the lasso generates a stronger reporter signal compared to a secondary antibody and lowers the limit of detection by 12-fold. The small size of the lasso and a long half-life of dissociation make the peptide a useful tool in antibody detection and immobilization., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Intraportal allogeneic islet transplantation has been demonstrated as a potential therapy for type 1 diabetes (T1D). The placement of islets into the liver and chronic immunosuppression to control rejection are two major limitations of islet transplantation. We hypothesize that localized immunomodulation with a novel form of FasL chimeric with streptavidin, SA-FasL, can provide protection and long-term function of islets at an extrahepatic site in the absence of chronic immunosuppression. Allogeneic islets modified with biotin and engineered to transiently display SA-FasL on their surface showed sustained survival following transplantation on microporous scaffolds into the peritoneal fat in combination with a short course (15 days) of rapamycin treatment. The challenges with modifying islets for clinical translation motivated the modification of scaffolds with SA-FasL as an off-the-shelf product. Poly (lactide-co-glycolide) (PLG) was conjugated with biotin and fabricated into particles and subsequently formed into microporous scaffolds to allow for rapid and efficient conjugation with SA-FasL. Biotinylated particles and scaffolds efficiently bound SA-FasL and induced apoptosis in cells expressing Fas receptor (FasR). Scaffolds functionalized with SA-FasL were subsequently seeded with allogeneic islets and transplanted into the peritoneal fat under the short-course of rapamycin treatment. Scaffolds modified with SA-FasL had robust engraftment of the transplanted islets that restored normoglycemia for 200 days. Transplantation without rapamycin or without SA-FasL did not support long-term survival and function. This work demonstrates that scaffolds functionalized with SA-FasL support allogeneic islet engraftment and long-term survival and function in an extrahepatic site in the absence of chronic immunosuppression with significant potential for clinical translation., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Understanding the adsorption of immunoglobulin G (IgG) on biomaterials surfaces is crucial for design and modification of the surfaces to alleviate inflammatory responses after implantation. Here, we report direct visualization and two-dimensional (2D) image interpretation of the IgG molecule adsorbed on simplified surfaces by single particle electron microscopy and atomic force microscopy. Influence of the orientational changes in adsorbed IgG on phagocytosis of macrophages against Staphylococcus epidermidis is further examined. Untreated amorphous carbon film and -COOH and -NH 2 grafted carbon films are employed as the model surfaces for the adsorption testing. Results show that IgG displays flat orientation lying on the untreated surface, while forms vertical orientations standing on the functionalized surfaces. These specific spatial alignments are associated with altered unfolding extent and structure rearrangement of IgG domains, which are influenced synergistically by surface charge and wettability of the substrata. The changes in interdomain distance of IgG molecules subsequently regulate immune behaviors of macrophages and phagocytosis of S. epidermidis. The results would give insight into appropriate design of biomaterial surfaces in nanoscales for desired inflammatory responses. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2838-2849, 2018., (© 2018 Wiley Periodicals, Inc.)

Although transplantation of pancreatic islets is a promising approach for treatment of type 1 diabetes mellitus, the engraftment efficiency of these islets is limited by host immune responses. Extensive efforts have been made to immunoisolate these islets by introducing barriers on the islet surface. To date, these barriers have not successfully protected islets from attack by the immune system. In addition, the inevitable permeability of an islet capsule cannot prevent filtration by proinflammatory cytokines and islet self-antigens. Thus, we have developed a surface engineering approach for localized immonumodulation of the islet microenvironment. Jagged-1 (JAG-1), as a potent immunomodulatory factor, was immobilized on the islet surface by mediation of a double-layer of heterobifunctional poly (ethylene glycol) (PEG). Immobilization and functionality of JAG-1 on PEGylated islet surfaces were established. When co-cultured with splenocytes, the JAG-1 conjugated islets induced a significant increase in regulatory T cells and regulated the cytokine levels produced by immune cells. The results demonstrated that JAG-1 immobilization could improve immunoprotection of pancreatic islets by localized modulation of the immune milieu from an inflammatory to an anti-inflammatory state. We also evaluated the effects of surface modification of these islets by JAG-1 in a xenotransplantation model. The transplanted JAG-1/PEG/islets group showed a significantly reduced blood glucose levels compared with the control group of diabetic mice during the acute phase of the immune response to the transplanted islets. Our results demonstrated that surface modification has the potential to shift the immune system from an inflammatory to anti-inflammatory milieu and may offer a new prospective for immunoprotection of pancreatic islets., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

First functional acting autoantibodies against G protein-coupled receptors such as the beta2-adrenoceptor in e.g. asthmatic patients have already been discovered in the early 1980s of the last century using assays that show their functional activity. Today, almost 40 years later, the measurement of such autoantibodies is still a challenge. Bioassays able to show the functional activity of such autoantibodies against G protein-coupled receptors are still the ne plus ultra for their detection and also classification when additionally exploiting specific receptor blockers for the neutralisation of the effect. Bioassays based on living cells make specific demands on the laboratories and are, therefore not suitable for every routine laboratory. Routine diagnostics, therefore, ideally requires different assays based on e.g. solid-phase technology, such as enzyme-linked immunosorbent assay (ELISA) technology. Here, endeavours are going on, using either the exact epitopes of such autoantibodies, if known, for trapping the autoantibodies, or the complete receptor in biological or artificial membranes that are immobilised onto a plastic carrier (ELISA principle). Here, we question and discuss the outcome of such tests, especially, if no controls such as the non-coated plastic carrier or the corresponding receptor-free membrane coat is offered as control in parallel, in light of the manifold experiences already collected with even non-agonistic acting autoantibodies by Güven et al. (J Immunol Methods 403:26-36, 2014).

To detect potential risk of severe cytokine release syndrome, in vitro assay formats with human cells have been developed. The two major testing platforms are a combination of whole blood with aqueous-phase test articles (whole blood cytokine assay, WBCA) and peripheral blood mononuclear cells with solid-phase articles (PBMC assay). Significant induction of cytokines was seen in both assays after treatment with a widely used control agent, TGN1412 or its analog CD28SA, but the WBCA cytokine profile differed from what was expected from clinical experience. In the WBCA, potential risk of CD28SA was detected by elevation of IL-8 whereas IL-2, a key cytokine after stimulation of CD28, was not induced in approximately 40% of donor samples. Therefore, further mechanistic understanding of the different responses in the in vitro assay was needed. In this study of donor samples treated with CD28SA, we compared the induction of cytokines and identified the cytokine-producing cells in the two assays. IL-2 was markedly elevated in all the donors in the PBMC assay but only in 1 of 3 donors in the WBCA. IL-8, the most sensitive biomarker in the WBCA, was produced by monocytes and granulocytes. T cells, the most relevant player in the PBMC assay with CD28SA, did not contribute to the positive response seen in two donors in the WBCA, which suggests that different players caused the positive cytokine responses to CD28SA in the two assays., (Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.)

Collagen, a strong platelet activator, is recognized by integrin α2β1 and GPVI. It induces aggregation, if added to suspended platelets, or platelet adhesion if immobilized to a surface. The recombinant non-prolylhydroxylated mini-collagen FC3 triple helix containing one α2β1 integrin binding site is a tool to specifically study how α2β1 integrin activates platelet. Whereas soluble FC3 monomers antagonistically block collagen-induced platelet activation, immobilization of several FC3 molecules to an interface or to colloidal nanobeads determines the agonistic action of FC3. Nanopatterning of FC3 reveals that intermolecular distances below 64 nm between α2β1 integrin binding sites trigger signaling through dot-like clusters of α2β1 integrin, which are visible in high resolution microscopy with dSTORM. Upon signaling, these integrin clusters increase in numbers per platelet, but retain their individual size. Immobilization of several FC3 to 100 nm-sized nanobeads identifies α2β1 integrin-triggered signaling in platelets to occur at a twentyfold slower rate than collagen, which activates platelet in a fast integrative signaling via different platelet receptors. As compared to collagen stimulation, FC3-nanobead-triggered signaling cause a significant stronger activation of the protein kinase BTK, a weak and dispensable activation of PDK1, as well as a distinct phosphorylation pattern of PDB/Akt., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The conformational conversion of pentameric C-reactive protein (pCRP) to monomeric CRP (mCRP) has been shown to play important roles in the action of CRP in inflammation regulation. In vivo studies revealed the origin of mCRP and provided insights into how pCRP dissociation affected its functions. However, the interplay and exact bioactivities of CRP isoforms still remain uncertain due to the rapid conformational conversion and complex milieu in vivo. Herein, we have used surface-immobilization of pCRP to generate a preservable intermediate with dual antigenicity expression of both pCRP and mCRP. The intermediate has been further shown to exhibit modified bioactivities, such as a high affinity with solution-phase pCRP and an enhanced capacity of complement interaction. These results thus not only provide the conformational conversion details of CRP, but also propose a simple way in vitro to study how the functions of CRP are tuned by distinct isoforms., Competing Interests: The authors have declared that no competing interests exist.

The dengue virus (DENV) causes over 350 million infections, resulting in ∼25,000 deaths per year globally. An effective dengue vaccine requires generation of strong and balanced neutralizing antibodies against all four antigenically distinct serotypes of DENV. The leading live-attenuated tetravalent dengue virus vaccine platform has shown partial efficacy, with an unbalanced response across the four serotypes in clinical trials. DENV subunit vaccine platforms are being developed because they provide a strong safety profile and are expected to avoid the unbalanced immunization issues associated with live multivalent vaccines. Subunit vaccines often lack immunogenicity, requiring either a particulate or adjuvanted formulation. Particulate formulations adsorbing monomeric DENV-E antigen to the particle surface incite a strong immune response, but have no control of antigen presentation. Highly neutralizing epitopes are displayed by DENV-E quaternary structures. To control the display of DENV-E and produce quaternary structures, particulate formulations that covalently attach DENV-E to the particle surface are needed. Here we develop a surface attached DENV2-E particulate formulation, as well as analysis tools, using PEG hydrogel nanoparticles created with particle replication in nonwetting templates (PRINT) technology. We found that adding Tween-20 to the conjugation buffer controls DENV-E adsorption to the particle surface during conjugation, improving both protein stability and epitope display. Immunizations with the anionic but not the cationic DENV2-E conjugated particles were able to produce DENV-specific and virus neutralizing antibody in mice. This work optimized the display of DENV-E conjugated to the surface of a nanoparticle through EDC/NHS chemistry, establishing a platform that can be expanded upon in future work to fully control the display of DENV-E.

A simple and effective strategy was developed to enrich ubiquitinated proteins (UPs) from cancer cell lysate using the α-Al 2 O 3 nanoparticles covalently linked with ubiquitin binding protein (Vx3) (denoted as α-Al 2 O 3 -Vx3) via a chemical linker. The functionalized α-Al 2 O 3 -Vx3 showed long-term stability and high efficiency for the enrichment of UPs from cancer cell lysates. Flow cytometry analysis results indicated dendritic cells (DCs) could more effectively phagocytize the covalently linked α-Al 2 O 3 -Vx3-UPs than the physical mixture of α-Al 2 O 3 and Vx3-UPs (α-Al 2 O 3 /Vx3-UPs). Laser confocal microscopy images revealed that α-Al 2 O 3 -Vx3-UPs localized within the autophagosome of DCs, which then cross-presented α-Al 2 O 3 -Vx3-UPs to CD8 + T cells in an autophagosome-related cross-presentation pathway. Furthermore, α-Al 2 O 3 -Vx3-UPs enhanced more potent antitumor immune response and antitumor efficacy than α-Al 2 O 3 /cell lysate or α-Al 2 O 3 /Vx3-UPs. This work highlights the potential of using the Vx3 covalently linked α-Al 2 O 3 as a simple and effective platform to enrich UPs from cancer cells for the development of highly efficient therapeutic cancer vaccines.

A new sensing device was developed to achieve ultrahigh sensitivity, by coupling polymer micropillars with a quartz crystal microbalance (QCM) substrate to form a two-degree- of-freedom resonance system (QCM-P). The sensitivity of these QCM-P devices was evaluated by measuring mass changes for both deposited gold film and adsorption of bovine serum albumin (BSA), respectively, on poly(methyl methacrylate) (PMMA) micropillar surfaces, as well as assessing ligand-analyte binding interactions between anti-human immunoglobulin G (anti-hIgG) and human immunoglobulin G (hIgG). The anti-hIgG and hIgG binding results show QCM-P achieved an eightfold improvement in sensitivity relative to conventional QCM sensors. In addition, the binding affinity obtained from the QCM-P device for anti-hIgG and hIgG proteins was found in good agreement with that measured by surface plasmon resonance (SPR) for the same binding reaction., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Solution based protein conjugation of small molecules involves multiple steps of chemical syntheses, bio-conjugation and purifications which are labor intensive and time-consuming. Since many small molecules have limited water solubility, conjugation to a protein is also a relatively low efficiency process in aqueous solutions. In this study, a model in situ protein conjugation of small molecules was achieved onto SPR surfaces, using progesterone and ovalbumin as a model small-molecule-protein system. The in situ protein conjugation not only eliminated the requirement for wet chemistry, but also provided an easy way to optimize the assay performance and screen various molecular linkers., (Copyright © 2017. Published by Elsevier Inc.)

An original impedimetric immunosensor was developed based on carbon nanotube (CNT) deposits with controlled thicknesses for enhanced electroactive surface areas leading to improved sensor performances. Cholera monitoring was chosen as the model immune system for this setup. These CNT deposits were characterized using confocal laser microscopy and electrochemical methods. To form the sensor device, the CNT deposits were functionalized via electrocoating of polypyrrole-nitrilotriacetic acid (poly(pyrrole-NTA)) followed by the formation of a Cu (II) complex with the NTA functions. The bioreceptor unit, cholera toxin B Subunit, modified with biotin, was then immobilized via coordination of the biotin groups with the NTA-Cu(II) complex. Each step of the formation of the immunosensor and the subsequent binding of the analyte antibody anti-cholera toxin were investigated with cyclic voltammetry and Electrochemical Impedance Spectroscopy. After optimization, the resulting impedimetric cholera sensor shows excellent reproducibility, increased sensitivities, a very satisfying detection limit of 10 -13 gmL -1 and an exceptional linear range for anti-cholera detection of 8 orders of magnitude (10 -13 -10 -5 gmL -1 ) and a sensitivity of 24.7 ± 0.4Ω per order of magnitude., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Adoptive cell therapy (ACT) has shown very promising results as treatment for cancer in a few clinical trials, such as the complete remissions of otherwise terminal leukemia patients. Nevertheless, the introduction of ACT into clinics requires overcoming not only medical but also technical challenges, such as the ex vivo expansion of large amounts of specific T-cells. Nanostructured surfaces represent a novel T-cell stimulation technique that enables us to fine-tune the density and orientation of activating molecules presented to the cells. In this work, we studied the influence of integrin-mediated cell-adhesion on T-cell activation, proliferation, and differentiation using nanostructured surfaces, which provide a well-defined system at the nanoscale compared with standard cultures. Specifically, we synthesized a polymeric polyethylene glycol (PEG) hydrogel cross-linked with two fibronectin-derived peptides, cyclic Arg-Gly-Asp (cRGD) and cyclic Leu-Asp-Val (cLDV), that are known to activate different integrins. Moreover, the hydrogels were decorated with a quasi-hexagonal array of gold nanoparticles (AuNPs) functionalized with the activating antibody CD3 to initiate T-cell activation. Both cLDV and cRGD hydrogels showed higher T-cell activation (CD69 expression and IL-2 secretion) than nonfunctionalized PEG hydrogels. However, only the cRGD hydrogels clearly supported proliferation giving a higher proportion of cells with memory (CD4 + CD45RO + ) than naı̈ve (CD4 + CD45RA + ) phenotypes when interparticle distances smaller than 150 nm were used. Thus, T-cell proliferation can be enhanced by the activation of integrins through the RGD sequence.

The aim of the present study is to develop new magnetic polymer microspheres with functional groups available for easy protein and antibody binding. Monodisperse macroporous poly(2-hydroxyethyl methacrylate) (PHEMA-COOH) microspheres ~4 µm in diameter and containing ∼1 mmol COOH/g were synthesized by multistep swelling polymerization of 2-hydroxyethyl methacrylate (HEMA), ethylene dimethacrylate (EDMA), and 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA), which was followed by MCMEMA hydrolysis. The microspheres were rendered magnetic by precipitation of iron oxide inside the pores, which made them easily separable in a magnetic field. Properties of the resulting magnetic poly(2-hydroxyethyl methacrylate) (mgt.PHEMA) particles with COOH functionality were examined by scanning and transmission electron microscopy (SEM and TEM), static volumetric adsorption of helium and nitrogen, mercury porosimetry, Fourier transform infrared (FTIR) and atomic absorption spectroscopy (AAS), and elemental analysis. Mgt.PHEMA microspheres were coupled with p46/Myo1C protein purified from blood serum of multiple sclerosis (MS) patients, which enabled easy isolation of monospecific anti-p46/Myo1C immunoglobulin G (IgG) antibodies from crude antibody preparations of mouse blood serum. High efficiency of this approach was confirmed by SDS/PAGE, Western blot, and dot blot analyses. The newly developed mgt.PHEMA microspheres conjugated with a potential disease biomarker, p46/Myo1C protein, are thus a promising tool for affinity purification of antibodies, which can improve diagnosis and treatment of MS patients., (© 2017 The Author(s).)

A biosensor for the detection of hepatitis B antibodies in clinical saliva was developed. Compared to conventional analysis of blood serum, it offers the advantage of noninvasive collection of samples. Detection of biomarkers in saliva imposes two major challenges associated with the low analyte concentration and increased surface fouling. The detection of minute amounts of hepatitis B antibodies was performed by plasmonically amplified fluorescence sandwich immunoassay. To have access to specific detection, we prevented the nonspecific adsorption of biomolecules present in saliva by brushes of poly[(N-(2-hydroxypropyl) methacrylamide)-co-(carboxybetaine methacrylamide)] grafted from the gold sensor surface and post modified with hepatitis B surface antigen. Obtained results were validated against the response measured with ELISA at a certified laboratory using serum from the same patients.

Factor H (FH), a regulatory protein of the complement system, can bind specifically to factor H-binding proteins (FHBPs) of Streptococcus suis serotype 2 (SS2), which contribute to evasion of host innate immune defenses. In the present study, we aimed to identify novel FHBPs and characterize the biological functions of FH in SS2 pathogenesis. Here, a method that combined proteomics and Far-western blotting was developed to identify the surface FHBPs of SS2. With this method, fourteen potential novel FHBPs were identified among SS2 surface proteins. We selected eight newly identified proteins and further confirmed their binding activity to FH. The binding of SS2 to immobilized FH decreased dramatically after pre-incubation with anti-FHBPs polyclonal antibodies. We showed for the first time that SS2 also interact specifically with mouse FH. Furthermore, we found that FH play an important role in adherence and invasion of SS2 to HEp-2 cells. Additionally, using a mouse model of intraperitoneal challenge, we confirmed that SS2 pre-incubated with FH enhanced bacteremia and brain invasion, compared with SS2 not pretreated with FH. Taken together, this study provides a useful method to characterize the host-bacteria interactions. These results first indicated that binding of FH to the cell surface improved the adherence and invasion of SS2 to HEp-2 cells, promoting SS2 to resist killing and leading to enhance virulence., (Copyright © 2016 Elsevier GmbH. All rights reserved.)

Chemokines control the migration of a large array of cells by binding to specific receptors on cell surfaces. The biological function of chemokines also depends on interactions between nonreceptor binding domains and proteoglycans, which mediate chemokine immobilization on cellular or extracellular surfaces and formation of fixed gradients. Chemokine gradients regulate synchronous cell motility and integrin-dependent cell adhesion. Of the various chemokines, CXCL12 has a unique structure because its receptor-binding domain is distinct and does not overlap with the immobilization domains. Although CXCL12 is known to be essential for the germinal center (GC) response, the role of its immobilization in biological functions has never been addressed. In this work, we investigated the unexplored paradigm of CXCL12 immobilization during the germinal center reaction, a fundamental process where cellular traffic is crucial for the quality of humoral immune responses. We show that the structure of murine germinal centers and the localization of GC B cells are impaired when CXCL12 is unable to bind to cellular or extracellular surfaces. In such mice, B cells carry fewer somatic mutations in Ig genes and are impaired in affinity maturation. Therefore, immobilization of CXCL12 is necessary for proper trafficking of B cells during GC reaction and for optimal humoral immune responses.

Infections affect millions of people each year and yet methods to ascertain their cause can take more than 24h to be effective. This delay between the presentation with symptoms and the ability to make an informed decision about treatment can have adverse consequences, including death in severe cases. Additionally, pathogen identification is a concern for public safety amid the growing threat of bioterrorism. Developing a detection system based on the immune system offers the advantage of broad specificity, while still remaining pertinent to human health. In this work, human Toll-Like Receptor-4 (TLR-4), a protein responsible for detecting lipopolysaccharide (LPS) of Gram-negative bacteria, was immobilized on both a large area and micro gold electrode via the tethering interaction of a modified Self-Assembled Monolayer (mSAM). In response to varying concentrations of its target, the protein-electrode combination showed a logarithmically proportional increased resistance to charge transfer from a solution-based redox probe, due to the formation of TLR-4 protein dimers. It also demonstrated excellent sensitivity to trace levels of Gram-negative bacteria, while remaining insensitive to both Gram-positive and viral challenges. Further characterization of our mSAM revealed that maintaining the appropriate receptor orientation on the electrode surface, mimicking TLR-4's role in a cellular context, was essential in producing a responsive sensor., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Autoantibodies raised against tumor-associated antigens have shown high promise as clinical biomarkers for reliable diagnosis, prognosis, and therapy monitoring of cancer. An electrochemical disposable biosensor for the specific and sensitive determination of p53-specific autoantibodies has been developed for the first time in this work. This biosensor involves the use of magnetic microcarriers (MBs) modified with covalently immobilized HaloTag fusion p53 protein as solid supports for the selective capture of specific autoantibodies. After magnetic capture of the modified MBs onto screen-printed carbon working electrodes, the amperometric signal using the system hydroquinone/H 2 O 2 was related to the levels of p53-autoantibodies in the sample. The biosensor was applied for the analysis of sera from 24 patients with high-risk of developing colorectal cancer and 6 from patients already diagnosed with colorectal (4) and ovarian (2) cancer. The developed biosensor was able to determine p53 autoantibodies with a sensitivity higher than that of a commercial standard ELISA using a just-in-time produced protein in a simpler protocol with less sample volume and easily miniaturized and cost-effective instrumentation.

For rapid screening and quantification of an antisera antibody, a nanometer bithiophene-based conductive biolinker can enhanced signal performance and can be used to verify the interaction of an anti-IFN-γ antibody with an IFN-γ protein. The experimental measurements take a generic approach which takes advantage of the functionality of thiophene-based linkers for biosensors. Effects associated with using bithiophene as a biolinker for surface plasmon resonance (SPR) spectroscopy are examined in this paper. By using an atomic force microscope (AFM), it was observed that the morphology of the bithiophene modified gold sensor surface became smoother than the original gold surface. We compared the response and concentration of the anti-IFN-γ antibody on a bithiophene-coated and dextran-coated biochip as well as on different thickness-modified surfaces under SPR relevant conditions. The results indicate that a response to IFN-γ molecules immobilized on a sensor using a bithiophene biolinker improved more than 8-fold when compared to that of a sensor using a dextran biolinker. Furthermore, the regeneration ability of the sensor surface shows good repeatability as only less than a 1% decrease was found after repeating the experimental work over 6 cycles. The characteristics provided us with a good platform for rapid screening, real-time monitoring and quantitative concentration of the autoimmune antibody activities.

Background: Immunity to human influenza A virus (IAV) infection is only partially understood. Broadly non-neutralizing antibodies may assist in reducing disease but have not been well characterized., Methods: We measured internalization of opsonized, influenza protein-coated fluorescent beads and live IAV into a monocytic cell line to study antibody-dependent phagocytosis (ADP) against multiple influenza hemagglutinin (HA) subtypes. We analyzed influenza HA-specific ADP in healthy human donors, in preparations of intravenous immunoglobulin (IVIG), and following IAV infection of humans and macaques., Results: We found that both sera from healthy adults and IVIG preparations had broad ADP to multiple seasonal HA proteins and weak cross-reactive ADP to non-circulating HA proteins. The ADP in experimentally influenza-infected macaque plasma and naturally influenza-infected human sera mediated phagocytosis of both homologous and heterologous IAVs. Further, the IAV phagocytosed in an antibody-mediated manner had reduced infectivity in vitro., Conclusion: We conclude that IAV infections in humans and macaques leads to the development of influenza-specific ADP that can clear IAV infection in vitro. Repeated exposure of humans to multiple IAV infections likely leads to the development of ADP that is cross-reactive to strains not previously encountered. Further analyses of the protective capacity of broadly reactive influenza-specific ADP is warranted.

Corticosteroid-binding globulin (CBG) is the predominant carrier of cortisol in circulation and is a non-inhibitory member of the serpin superfamily of serine protease inhibitors. In the stressed or "S" conformation, CBG possesses an intact exposed reactive centre loop (RCL) that can be irreversibly cleaved by elastase released from activated human neutrophils whereupon it adopts a relaxed or "R" conformation. The latter conformation has decreased affinity for cortisol, allowing the release of the majority of cortisol at sites of inflammation. Recently there has been speculation that mild increments in heat such as found in pyrexia (39-40°C) may also induce a reversible "flip-flop" of the RCL into the body of the protein structure, without cleavage, facilitating a reversible temperature-dependent release of cortisol. Here we raised a new monoclonal antibody to the RCL of human CBG and used this in concert with an existing RCL antibody and show by surface plasma resonance that, at temperatures up to 40°C, the RCL of purified CBG and the RCL of CBG in intact plasma is accessible to these two antibodies. Together, the epitopes of these antibodies span 11 consecutive amino acids (STGVTLNLTSK) of the 18 residues of the RCL. This adequate antibody cover of the RCL sequence leads to the conclusion that the proposed temperature-dependent "flip-flop" of the RCL of CBG is doubtful., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Polyreactive antibodies represent a considerable fraction of the immune repertoires. Some antibodies acquire polyreactivity post-translationally after interaction with various redox-active substances, including heme. Recently we have demonstrated that heme binding to a naturally polyreactive antibody (SPE7) results in a considerable broadening of the repertoire of recognized antigens. A question remains whether the presence of certain level of natural polyreactivity of antibodies is a prerequisite for heme-induced further extension of antigen binding potential. Here we used a second monoclonal antibody (Hg32) with unknown specificity and absence of intrinsic polyreactivity as a model to study the potential of heme to induce polyreactivity of antibodies. We demonstrated that exposure to heme greatly extends the antigen binding potential of Hg32, suggesting that the intrinsic binding promiscuity is not a prerequisite for the induction of polyreactivity by heme. In addition we compared the kinetics and thermodynamics of the interaction of heme-exposed antibodies with a panel of unrelated antigens. These analyses revealed that the two heme-sensitive antibodies adopt different mechanisms of binding to the same set of antigens. This study contributes to understanding the phenomenon of induced antibody polyreactivity. The data may also be of importance for understanding of physiological and pathological roles of polyreactive antibodies., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Mimics of discontinuous epitopes of for example bacterial or viral proteins may have considerable potential for the development of synthetic vaccines, especially if conserved epitopes can be mimicked. However, due to the structural complexity and size of discontinuous epitopes molecular construction of these mimics remains challeging. We present here a convergent route for the assembly of discontinuous epitope mimics by successive azide alkyne cycloaddition on an orthogonal alkyne functionalized scaffold. Here the synthesis of mimics of the HIV gp120 discontinuous epitope that interacts with the CD4 receptor is described. The resulting protein mimics are capable of inhibition of the gp120-CD4 interaction. The route is convergent, robust and should be applicable to other discontinuous epitopes.

The physicochemical nature of allergen molecules differ from the liquid phase to the solid phase. However, conventional allergy tests are based on the detection of immunoglobulin (Ig)E binding to immobilized allergens. We recently developed an in vitro allergy testing method using a luciferase-reporting humanized rat mast cell line to detect IgE crosslinking-induced luciferase expression (EXiLE test). The aim of the present study was to evaluate the effects of antigen immobilization on the results of different in vitro allergy tests using two anti-ovalbumin (OVA) antibodies (Abs), E-C1 and E-G5, with different properties in the OVA-induced allergic reaction. Both Abs showed clear binding to OVA with an enzyme-linked immunosorbent assay and by BIAcore analysis. However, only E-C1 potentiated EXiLE response for the liquid-phase OVA. On the other hand, OVA immobilized on solid-phase induced EXiLE responses in both E-C1 Ab- and E-G5 Ab-sensitized mast cells. Western blotting of OVA indicated that E-C1 Ab binds both to OVA monomers and dimers, unlike E-G5 Ab, which probably binds only to the OVA dimer. These results suggest that antigen immobilization enhanced IgE crosslinking ability through multimerization of allergen molecules in the solid phase, resulting in an increase in false positives in IgE binding-based conventional in vitro allergy tests. These findings shed light on the physicochemical nature of antigens as an important factor for the development and evaluation of in vitro allergy tests and suggest that mast cell activation-based allergy testing with liquid-phase allergens is a promising strategy to evaluate the physiological interactions of IgE and allergens.

With the increasing need for understanding antibody specificity in antibody and vaccine research, pepscan assays provide a rapid method for mapping and profiling antibody responses to continuous epitopes. We have developed a relatively low-cost method to generate peptide microarray slides for studying antibody binding. Using a setup of an IntavisAG MultiPep RS peptide synthesizer, a Digilab MicroGrid II 600 microarray printer robot, and an InnoScan 1100 AL scanner, the method allows the interrogation of up to 1536 overlapping, alanine-scanning, and mutant peptides derived from the target antigens. Each peptide is tagged with a polyethylene glycol aminooxy terminus to improve peptide solubility, orientation, and conjugation efficiency to the slide surface.

Emerging technologies for the design and generation of human antibodies require improved approaches enabling their screening, characterization and validation. Currently, strategies based on ELISA or western blot are used to that aim. However, the ever increasing number of novel antibodies generated would benefit from the development of new high-throughput (HT) platforms facilitating rapid antibody identification and characterization. Herein, we describe a protein chip bearing recombinant phage particles and based on a large phage antibody library. In this paper we have set forth a novel implementation which provides a powerful and simple methodology enabling the identification of single-chain variable fragments (scFv). As a proof-of-principle of this method, we tested it with recombinant antigen (human recombinant interleukin 8). Additionally, we developed a novel bioinformatics tool that serves to compare this novel strategy with traditional methods. The method described here, together with associated informatics tools, is robust, relatively fast and represents a step-forward in protocols including phage library screenings., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Humoral immune responses against tumor-associated antigens (TAAs) or cancer/testis antigens (CTAs) aberrantly expressed in tumor cells are frequently observed in cancer patients. Recent clinical studies have elucidated that anticancer immune responses with increased levels of anti-TAA/CTA antibodies improve cancer survival rates. Thus, these antibody levels are promising biomarkers for diagnosing the efficiency of cancer immunotherapy. Full-length antigens are favored for detecting anti-TAA/CTA antibodies because candidate antigen proteins contain multiple epitopes throughout their structures. In this study, we developed a methodology to prepare purified water-soluble and full-length antigens by using cysteine sulfhydryl group cationization (S-cationization) chemistry. S-Cationized antigens can be prepared from bacterial inclusion bodies, and they exhibit improved protein solubility but preserved antigenicity. Anti-TAA/CTA antibodies detected in cancer patients appeared to recognize linear epitopes, as well as conformational epitopes, and because the frequency of cysteine side-residues on the epitope-paratope interface was low, any adverse effects of S-cationization were virtually negligible for antibody binding. Furthermore, S-cationized antigen-immobilized Luminex beads could be successfully used in highly sensitive quantitative-multiplexed assays. Indeed, patients with a more broadly induced serum anti-TAA/CTA antibody level showed improved progression-free survival after immunotherapy. The comprehensive anti-TAA/CTA assay system, which uses S-cationized full-length and water-soluble recombinant antigens, may be a useful diagnostic tool for assessing the efficiency of cancer immunotherapy.

Celiac disease (CD) is one of the most common digestive disorders caused by an abnormal immune reaction to gluten. So far there are no available therapies, the only solution is a strict gluten-free diet, which however could be very challenging as gluten can be hidden in many food products. Furthermore an additional problem is related to cross-contamination of nominal gluten-free foods with gluten-based ones during manufacturing. Here we propose a lab on chip platform as a powerful tool to help food manufacturers to evaluate the real amount of gluten in their products by an accurate in-situ control of the production chain and maybe to specify the real gluten content in packages labeling. Our portable gliadin-immunochips, based on an electrochemical impedance spectroscopy transduction method, were first calibrated and then validated for both liquid and solid food matrixes by analyzing different beers and flours. The high specificity of our assay was also demonstrated by performing control experiments on rice and potatoes flours containing prolamin-like proteins. We achieved limit of quantification of 0.5 ppm for gliadin that is 20 times lower than the worldwide limit established for gluten-free food while the method of analysis is faster and cheaper than currently employed ELISA-based methods. Moreover our results on food samples were validated through a mass spectrometry standard analysis., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Background: Development of indirect enzyme-linked immunosorbent assays (ELISAs) often utilizes synthetic peptides or recombinant proteins from Escherichia coli as immobilized antigens. Because inclusion bodies (IBs) formed during recombinant protein expression in E. coli are commonly thought as misfolded aggregates, only refolded proteins from IBs are used to develop new or in-house diagnostic assays. However, the promising utilities of IBs as nanomaterials and immobilized enzymes as shown in recent studies have led us to explore the potential use of IBs of recombinant Epstein-Barr virus viral capsid antigen p18 (VCA p18) as immobilized antigens in ELISAs for serologic detection of nasopharyngeal carcinoma (NPC)., Methods: Thioredoxin fusion VCA p18 (VCA-Trx) and IBs of VCA p18 without fusion tags (VCA-IBs) were purified from E. coli. The diagnostic performances of IgG/VCA-IBs, IgG/VCA-Denat-IBs (using VCA-IBs coated in 8mol/l urea), IgG/VCA-Trx, and IgG/VCA-Peptide assays were compared by screening 100 NPC case-control pairs., Results: The IgG/VCA-Denat-IBs assay showed the best area under the receiver operating characteristic curve (AUC: 0.802; p<0.05), while the AUCs for the IgG/VCA-IBs, IgG/VCA-Trx, and IgG/VCA-Peptide assays were comparable (AUC: 0.740, 0.727, and 0.741, respectively)., Conclusion: We improved the diagnostic performance of the ELISA significantly using IBs of recombinant VCA p18., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The nuclear receptor subfamily 4 (NR4A) is composed of 3 related proteins sharing a DNA binding domain (DBD) and a ligand-binding domain (LBD). The nuclear receptor related 1 protein (Nurr1 or NR4A2) plays a key role in the maintenance of the dopaminergic system. Dopamine dysfunctions associated with the Nurr1 gene include Parkinson's disease, schizophrenia and manic depression among others. Furthermore, recent evidence indicates that Nurr1 is also expressed in other brain areas such as the hippocampus and plays critical roles for learning and memory. The other members of the family are nerve growth factor IB (Nur77 or NR4A1) and neuron-derived orphan receptor 1 (NOR1 or NR4A3). To help investigate the precise functional roles of Nurr1 in dopaminergic and other brain region-related neuronal dysfunctions antibodies devoid of cross-reactivities against Nur77 and NOR1 were needed. Since the proteins are more divergent in their LBDs than in their DNA binding domains immunization with purified LBDs should yield antibodies specific for Nurr1 with minimal reactivities against Nur77 and/or NOR1. Although anti-Nurr1 antibodies were successfully generated these showed significant immunoreactivity against the other members of the family. Affinity chromatography over immobilized Protein A followed by pre-adsorption against immobilized Nur77 and NOR1 LBDs yielded Nurr1 specific antibodies free of cross-reactivity. Here, we selectively target antibodies against a specific member of a highly conserved family of proteins by immunizing animals with their most divergent regions followed by removing cross reactive antibodies by pre-adsorption. The goal of the protocol is to increase polyclonal antibodies specificity through pre-adsorption against cross-reactive antigens.

A sandwich-type electrochemical immunosensor based on redox probe tags identification technology for ultrasensitive simultaneous detection of four antigens was proposed. In this project, well-distributed graphene/gold (GR-Au) hybrid film was acquired through one-step codeposition in an electrode surface and served as the base substrate for immobilizing capture antibodies (Ab1). Hybridization chain reaction (HCR) and biotin/streptavidin (B/SA), combining with gold magnetic nanoparticles were applied to increase the immobilization amount of signal tags in detection antibody (Ab2) bioconjugates. To verify this strategy, four representative biomarkers, a-fetoprotein (AFP), carcinoembryonic antigen (CEA), carbohydrate antigen (CA)125 and prostate special antigen (PSA), were used as model analytes. The resulting immunosensor could simultaneously detect four antigens in single-pass differential pulse voltammetry (DPV) scan, and exhibited obviously improved senstivity compared to previous similar immunosensors, displayed good linear relationships in the ranges from 0.2 to 800 pg/mL for AFP, 0.2 to 600 pg/mL for CEA, 0.2 to 1000 pg/mL for CA125, 0.2 to 800 pg/mL for PSA and with detection limits of 62, 48, 77 and 60 fg/mL, respectively., (Copyright © 2014 Elsevier B.V. All rights reserved.)