Search

This study investigated acid splitting wastewater (ASW) and interphase (IF) from soapstock splitting, as well as matter organic non glycerol (MONG) from glycerol processing, as potential substrates for biogas production. Batch and semicontinuous thermophilic anaerobic digestion experiments were conducted, and the substrates were preliminary treated using commercial enzymes kindly delivered by Novozymes A/C. The greatest enhancement in the batch digestion efficiency was achieved when three preparations; EversaTransform, NovoShape, and Lecitase were applied in the hydrolysis stage, which resulted in the maximum methane yields of 937 NL/kg VS and 915 NL/kg VS obtained from IF and MONG, respectively. The co-digestion of 68% ASW, 16% IF, and 16% MONG (wet weight basis) performed at an organic loading rate (OLR) of 1.5 kg VS/m 3 /day provided an average methane yield of 515 NLCH 4 /kg VS added and a volatile solid reduction of nearly 95%. A relatively high concentration of sulfates in the feed did not significantly affect the digestion performance but resulted in an increased hydrogen sulfide concentration in the biogas with the peak of 4000 ppm.

The annual output of salted duck egg white (SDEW) is estimated to be over 1.5 million tons in China, most of which is discarded due to high salt content. This has led to serious waste and environmental impact. Therefore, we developed an eco-friendly biocoagulation separation technology by combining chitosan and sodium alginate in order to produce a novel iron-binding peptide (DPs-Fe2+) from SDEW. The structure of DPs-Fe2+ was characterized by ultraviolet-visible spectroscopy, fluorescence spectroscopy, and Fourier transform infrared spectroscopy, followed by measuring DPs-Fe2+ response in a simulated digestion/Caco-2 cell model. Results showed that chitosan and sodium alginate complex could remove 91.21% of salt from SDEW, and the protein recovery rate reached 95.50%. Characterization results indicated that DPs bonded with Fe2+ to form a soluble chelate. Moreover, Caco-2 cell monolayer model indicated that the transport rate of Fe2+ was as high as 10.02% at 0.1 mg/ml concentration of digested chelates. The results demonstrate the potential application of DPs as a novel carrier for enhancing iron absorption. This research contributes to the development of an effective industrial desalination method and highlights an opportunity for recycling an otherwise discarded processing byproduct. PRACTICAL APPLICATION: Salted duck egg whites (SDEW) are the primary byproduct of salted egg yolk production, most of which is discarded due to high salt content. Hence, efficient utilization of the high-value proteins in SDEW is an urgent problem that must be resolved. Herein, we developed an effective industrial desalination method by combining chitosan and sodium alginate, which achieved excellent SDEW desalination and protein recovery. Furthermore, we produced a novel iron-binding peptide (DPs-Fe2+), which enhanced the transportation and absorption of Fe2+ in Caco-2 cell model, suggesting its potential as an iron supplement., (© 2021 Institute of Food Technologists®.)

The processing of tomato fruit into puree, juices, ketchup, sauces, and dried powders generates a significant amount of waste in the form of tomato pomace, which includes seeds and skin. Tomato processing by-products, particularly seeds, are reservoirs of health-promoting macromolecules, such as proteins (bioactive peptides), carotenoids (lycopene), polysaccharides (pectin), phytochemicals (flavonoids), and vitamins (α-tocopherol). Health-promoting properties make these bioactive components suitable candidates for the development of novel food and nutraceutical products. This review comprehensively demonstrates the bioactive compounds of tomato seeds along with diverse biomedical activities of tomato seed extract (TSE) for treating cardiovascular ailments, neurological disorders, and act as antioxidant, anticancer, and antimicrobial agent. Utilization of bioactive components can improve the economic feasibility of the tomato processing industry and may help to reduce the environmental pollution generated by tomato by-products., (Copyright © 2021 The Authors. Published by Elsevier Masson SAS.. All rights reserved.)

The treatability of seven wastewater samples generated by a textile digital printing industry was evaluated by employing 1) anammox-based processes for nitrogen removal 2) microalgae (Chlorella vulgaris) for nutrient uptake and biomass production 3) white-rot fungi (Pleurotus ostreatus and Phanerochaete chrysosporium) for decolorization and laccase activity. The biodegradative potential of each type of organism was determined in batch tests and correlated with the main characteristics of the textile wastewaters through statistical analyses. The maximum specific anammox activity ranged between 0.1 and 0.2 g N g VSS-1 d-1 depending on the sample of wastewater; the photosynthetic efficiency of the microalgae decreased up to 50% during the first 24 hours of contact with the textile wastewaters, but it improved from then on; Pleurotus ostreatus synthetized laccases and removed between 20-62% of the colour after 14 days, while the enzymatic activity of Phanerochaete chrysosporium was inhibited. Overall, the findings suggest that all microbes have great potential for the treatment and valorisation of textile wastewater after tailored adaptation phases. Yet, the depurative efficiency can be probably enhanced by combining the different processes in sequence., Competing Interests: The involvement of the companies in our study does not alter our adherence to PLOS ONE policies on sharing data and materials.

Acid and metalliferous drainage (AMD) remains a challenging issue for the mining sector. AMD management strategies have attempted to shift from treatment of acid leachates post-generation to more sustainable at-source prevention. Here, the efficacy of microbial-geochemical at-source control approach was investigated over a period of 84 weeks. Diverse microbial communities were stimulated using organic carbon amendment in a simulated silicate-containing sulfidic mine waste rock environment. Mineral waste in the unamended leach system generated AMD quickly and throughout the study, with known lithotrophic iron- and sulfur-oxidising microbes dominating column communities. The organic-amended mineral waste column showed suppressed metal dissolution and AMD generation. Molecular DNA-based next generation sequencing confirmed a less diverse lithotrophic community in the acid-producing control, with a more diverse microbial community under organic amendment comprising organotrophic iron/sulfur-reducers, autotrophs, hydrogenotrophs and heterotrophs. Time-series multivariate statistical analyses displayed distinct ecological patterns in microbial diversity between AMD- and non-AMD-environments. Focused ion beam-TEM micrographs and elemental mapping showed that silicate-stabilised passivation layers were successfully established across pyrite surfaces in organic-amended treatments, with these layers absent in unamended controls. Organic amendment and resulting increases in microbial abundance and diversity played an important role in sustaining these passivating layers in the long-term., Competing Interests: Declaration of Competing Interest None declared., (Copyright © 2020 Elsevier B.V. All rights reserved.)

In recent years, photoelectrocatalysis (PEC) for the treatment of industrial wastewaters (IWWs) has been repeatedly proposed. However, despite the number of tests reported in literature, only a few of them were conducted on real IWWs. In this study, real pharmaceutical IWWs showing an intense recalcitrant color were treated by PEC and H 2 O 2 -assisted PEC (UV/TiO 2 /Bias and UV/H 2 O 2 /TiO 2 /Bias, respectively) on TiO 2 meshes having sub-micrometric features obtained by Plasma Electrolytic Oxidation. Photolysis (UV), chemical oxidation (H 2 O 2 ) and H 2 O 2 -assisted photolysis (UV/H 2 O 2 ) were tested in the same reactor for comparison. The configuration UV/H 2 O 2 /TiO 2 /bias showed the best results in term of decolorization efficiency and rate, where decolorization was 55 % (single-step H 2 O 2 dosing) and 44 % (three-step H 2 O 2 dosing), after 2 h of contact time. In the same contact time, UV and UV/TiO 2 /Bias processes did not give decolorization. A more effective COD removal was measured for the PEC processes, UV/H 2 O 2 /TiO 2 /Bias (-24 %) and UV/TiO 2 /Bias (-20 %), while COD removal by UV was almost 0 %. Correspondingly, the SOUR values showed that PEC combined with a single-step H 2 O 2 dosage was the most effective configuration, leading to the highest biodegradability of the treated IWW with respect to the other processes. The energy consumption analysis demonstrated that PEC+H 2 O 2 (single-step dosage) optimized energy costs., Competing Interests: Declaration of Competing Interest None., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Azo dyes are recalcitrant compounds used as a colorant in various industries. The pollution caused by their extensive usage has adversely affected the environment for years. The existing physicochemical methods for dye pollution remediation are rather inefficient and hence there is a dearth of low-cost, potential systems capable of dye degradation. The current research studies the biodegradation potential of immobilized bacterial cells against azo dyes Reactive Orange 16 (RO-16) and Reactive Blue 250 (RB-250). Two indigenous dye degrading bacteria Bacillus sp. VITAKB20 and Lysinibacillus sp. KPB6 was isolated from textile sludge sample. Free cells of Bacillus . sp. VITAKB20 degraded 92.38% of RO-16 and that of Lysinibacillus sp. KPB6 degraded 95.36% of RB-250 within 72 h under static conditions. Upon immobilization with calcium alginate, dye degradation occurred rapidly. Bacillus. sp. VITAKB20 degraded 97.5% of RO-16 and Lysinibacillus sp. KPB6 degraded 98.2% of RB-250 within 48 h under shaking conditions. Further, the nature of dye decolorization was biodegradation as evident by high-performance liquid chromatography (HPLC), and Fourier-transform infrared spectroscopy (FTIR) results. Phytotoxicity and biotoxicity assays revealed that the degraded dye products were less toxic in nature than the pure dyes. Thus, immobilization proved to be a highly likely alternative treatment for dye removal.

Whey is a byproduct with nutritional value and high organic and saline content. It is an important source of organic contamination in dairy industry. In this paper, we gave an overview of the current use of membrane materials and membrane processing in cheese whey protein recovery and discussed recent developments in membrane technology. Different types of membranes, such as polymers, ceramic membranes and modification membranes, are used for various purposes, such an increasing permeation flux, reducing membrane fouling, and increasing the protein rejection rate, concentration, fractionation and purification of whey protein. New membrane processing methods and integrated membrane methods to recover whey protein were reviewed. Membrane fouling factors during whey protein ultrafiltration process, which included whey protein conformation, membrane filtration conditions and the interaction between proteins and the membrane surface or pores, were also discussed and analyzed to reveal membrane fouling mechanism., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Polyhydroxyalkanoates (PHAs) are intracellular carbon and energy storage reserve material stored by gram-negative bacteria under nutrient limitation. PHAs are best alternative biodegradable plastics (bio-plastics) due to their resemblance to conventional synthetic plastic. The present study investigated the synergistic effect of nutritional supplements (amino acid and vitamin) on the PHA production by Alcaligenes sp. NCIM 5085 utilizing a sugar refinery waste (cane molasses) under submerged fermentation process. Initially, the effect of individual factor on PHA yield was studied by supplementing amino acids (cysteine, isoleucine, and methionine), vitamin (thiamin), and cane molasses at varying concentration in the production medium. Further, the cultivation medium was optimized by varying the levels of cane molasses, methionine and thiamin using response surface methodology to enhance the PHA yield. The maximum PHA yield of 70.89% was obtained under the optimized condition, which was then scaled up on 7.5 L-bioreactor. Batch cultivation in 7.5 L-bioreactor under the optimized condition gave a maximum PHA yield and productivity of 79.26% and 0.312 gL -1 h -1 , respectively. The PHA produced was subsequently characterized as PHB by FTIR. PHB extracted was of relatively high molecular weight and crystallinity index. DSC analysis gave T g , T m , and X c of 4.2, 179 °C and 66%, respectively. TGA analysis showed thermal stability with maximized degradation occurring at 302 °C, which is above the melting temperature (179 °C) of the purified polymer. The extracted polymer, therefore, possessed desirable material properties to be used in food packaging.

Bio-waste in the form of chicken eggshells, which contain high amounts of calcium carbonate (CaCO3), is used to store energy. The fine eggshell powders are used as an electrode against a metallic lithium anode in a non-aqueous electrolyte. The initial discharge capacitance of the eggshell system was found to be 232 F g-1, while the reversible capacitance was 120 F g-1. Thereon, the cell maintained an excellent capacitance retention of 92% over 1000 cycles. The electrochemical performance obtained is comparable to that of commercially available classical activated carbon (AC) material. CaCO3 showed a non-faradaic behaviour and the shape of the electrochemical curves resembles that of the AC electrode. The preliminary findings suggest that CaCO3 from eggshells can be used as the electrode in Li-ion capacitors to store and release charges effectively over a wide electrochemical stability window of 4 V. Using chicken eggshells in this manner not only reduces the amount of bio-waste, but also adds considerable value. A detailed understanding of the electrochemical and physical behaviour of the material is needed in order to improve its performance and to enable its widespread use.

The effluent discharged by the textile dyehouses has a seriously detrimental effect on the aquatic environment. Some dyestuffs produce toxic decomposition products and the metal complex dyes release toxic heavy metals to watercourses. Of the dyes used in the textile industry, effluents containing reactive dyes are the most difficult to treat because of their high water-solubility and poor absorption into the fibers. A range of treatments has been investigated for the decolorization of textile effluent and the adsorption seems to be one of the cheapest, effective and convenient treatments. In this review, the adsorbents investigated in the last decade for the treatment of textile effluent containing reactive dyes including modified clays, biomasses, chitin and its derivatives, and magnetic ion-exchanging particles have been critically reviewed and their reactive dye binding capacities have been compiled and compared. Moreover, the dye binding mechanism, dye sorption isotherm models and also the merits/demerits of various adsorbents are discussed. This review also includes the current challenges and the future directions for the development of adsorbents that meet these challenges. The adsorption capacities of adsorbents depend on various factors, such as the chemical structures of dyes, the ionic property, surface area, porosity of the adsorbents, and the operating conditions. It is evident from the literature survey that decolorization by the adsorption shows a great promise for the removal of color from dyehouse effluent. If biomasses want to compete with the established ion-exchange resins and activated carbon, their dye binding capacity will need to be substantially improved., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Background: The World Health Organization (WHO) estimates that 25% of global morbidity and one-third of childhood morbidity may be attributable to environment. Low and high-income countries displayed different environmental risks. Mexico demonstrates the necessity for creating a national environmental health program. In southeastern Mexico, Tixméhuac, is a Mayan community with a high marginalization degree and social backwardness. The main childhood morbidities are acute and chronic diseases., Objective: The aim of the study was to recognize environmental risks for children's health in Tixméhauc, Yucatan State., Methods: A total of one hundred children under five years old participated. To identify the environmental risks at home, items from the Green Sheet Guidance (WHO), Salamanca General Survey and Environmental Clinical History were used. To know the prevalence of respiratory diseases and asthma, the International Study of Asthma and Allergies in Children (ISAAC) survey was used. Potentially hazardous sites were identified partially using the Methodology for Identification and Evaluation of Health Hazards in Contaminated Sites from the Pan American Health Organization (PAHO)., Findings: The low stature of, malnutrition, presence of wheezing and asthma symptoms in children were higher than expected. The suspected cases of parasitosis and vector-borne disease occurred in 50% of the children. Indoor air quality perception was associated with respiratory pathology history; housing quality was related to suspected cases of vector-borne diseases; drinking water quality was linked to suspected cases of parasitosis. Risk areas in the community include agricultural activity, which has led to deposits of empty containers of agrochemicals and electronic waste among solid waste dump., Conclusion: This study presents observed environmental risks to children in a low development country and in developing countries. The community has a low perception of the environmental risk. The need for public health programs reducing risks to children's environmental health is imperative., Competing Interests: The authors have no competing interests to declare., (© 2018 The Author(s). This is an open-access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC-BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. See http://creativecommons.org/licenses/by/4.0/.)

Background: Traditional ceramics are a cultural heritage in Mexico, used by the general population in everyday life. These ceramics are glazed with lead oxide and are usually produced in households that share living and working spaces. Glazing is usually performed by women, and children are not restrained from the work space and frequently help, resulting in high levels of lead exposure for all. Interventions that promote a change in technology (such as lead-free glazes or efficient kilns) are often unrealistic for potters with fewer economic resources who depend on their production as their main income. Interventions focusing on exposure prevention (rather than a technology change) at the household level are scarce., Methods: Working hand-in-hand with a group of nine women, lay community workers, promotoras, from Santa Fe de Laguna, Michoacán, we developed a program focusing on the self-recognition of health risks. The program was composed of health education (including a lead in blood and bone measurement for women), health/work risk recognition and communication to the community, and work/living area reorganization and remediation in three stages: work with 1) promotoras, 2) their extended families, and 3) their community, including talks in elementary schools., Results: The promotoras developed and distributed risk communication graphic materials and delivered a lead-awareness talk in the Purhepecha language, in the local primary health-care clinic and three elementary schools. Lead in bone levels had a mean ± SD (min, max) of rotula: 84.8 μg/g ± 68.9 (23.89, 214.2), tibia 93.2 μg/g 81.2 (14.23, 261.21). We implemented safer and cleaner ceramic production in the promotoras workshops.Public Health Relevance: Environmental and occupational exposures can be reduced through programs that are tailored by and for a specific community. When there is no evident alternative technology for safer production, such programs can empower groups and lead to reduced exposure for their children, family and community., Competing Interests: The authors have no competing interests to declare., (© 2018 The Author(s). This is an open-access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC-BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. See http://creativecommons.org/licenses/by/4.0/.)

The pectin gel has been proved to be an effective material for methylene blue (MB) removal, but it presented low adsorption rate. To get over the vice, the pectin microgel particles (PMP) was prepared. No matter high or low initial MB concentration, the PMP presented high adsorption rate with equilibrium time of 20min. The adsorption process based on monolayer adsorption and adsorbance of 284.09mg/g was obtained. What's more, the adsorption process was electrostatic adsorption with mean free energy of 74.223kJ/mol. The pseudo-second-order kinetic model fitted perfectly to the experimental data. The MB uptake was controlled by film diffusion mechanism. Furthermore, the recovery efficiency of regenerated PMP were higher than 80% after three cycles. The present study showed the PMP presented acceptable adsorbance, high adsorption rate and recovery efficiency. Thus, we believe that the PMP was a promising candidate for MB cleanup., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Inappropriate treatments for the effluents from semiconductor plants might cause the releases and wide distributions of selenium (Se) into the ecosystems. In this study, Al/Si and Fe/Si coprecipitates were selected as model adsorbents as they often formed during the wastewater coagulation process, and the removal efficiency of selenite (SeO 3 ) and selenate (SeO 4 ) onto the coprecipitates were systematically examined. The removal efficiency of SeO 3 and SeO 4 was highly related to surface properties of Al/Si and Fe/Si coprecipitates. The surface-attached Al shell of Al/Si coprecipitates shielded a portion of negative charges from the core SiO 2 , resulting in a higher point of zero charge than that of Fe/Si coprecipitates. Thus, adsorption of SeO 3 /SeO 4 was favorable on the Al/Si coprecipitates. Adsorptions of both SeO 3 and SeO 4 on Al/Si coprecipitates were exothermic reactions. On Fe/Si coprecipitates, while SeO 3 adsorption also showed the exothermic behavior, SeO 4 adsorption occurred as an endothermic reaction. The kinetic adsorption data of SeO 3 /SeO 4 on Al/Si and Fe/Si coprecipitates were described well by the pseudo-second-order kinetic model. SeO 4 and SeO 3 adsorption on Fe/Si or Al/Si were greatly inhibited by the strong PO 4 ligand, whereas the weak ligand such as SO 4 only significantly affected SeO 4 adsorption. The weakest complex between SeO 4 and Al was implied by the essentially SeO 4 desorption as SeO 4 /PO 4 molar ratios decreased from 0.5 to 0.2. These results were further confirmed by the less SeO 4 desorption (41%) from Fe/Si coprecipitates than that from Al/Si coprecipitates (78%) while PO 4 was added sequentially., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Iron and steel industry is the principal driving force propelling economic and technological growth of a nation. However, since its inception this industry is associated with widespread environmental pollution and enormous water consumption. Different units of a steel plant discharge effluents loaded with toxic, hazardous pollutants, and unutilized components which necessitates mitigation. In this paper, pollutant removal efficiency, effluent volume product quality, and economic feasibility of existing treatments are studied vis-à-vis their merits, demerits, and innovations to access their shortcomings which can be overcome with new technology to identify future research directions. While conventional methods are inadequate for complete remediation and water reclamation, the potential of advanced treatments, like membrane separation, remains relatively untapped. It is concluded that integrated systems combining membrane separation with chemical treatments can guarantee a high degree of contaminant removal, reusability of effluents concurrently leading to process intensification ensuring ecofriendliness and commercial viability.

This study investigated the occurrence, removal and influence of plant-operating conditions on removal mechanisms of 83 VOCs in different treatment units of a CETP in Mumbai, treating industrial waste on primary and secondary level. A mass balance approach was used to predict VOC removal by volatilization, stripping, weir drop, adsorption, and biodegradation. Results indicate that ∼17% of VOCs were removed by stripping in equalization tank and ∼8% were removed by weir drop in primary clari-flocculator respectively. Biodegradation was the dominant mechanism in aeration tank and was relatively poor for hydrophobic compounds which were more vulnerable to removal by stripping. Stripping rates could be reduced by increasing the active biomass concentration and using fine pore diffusers to reduce the air/effluent ratio. Decrease in Henry's constant and compound concentration can shift the main removal mechanism from stripping to biodegradation. Results also show considerable agreement between measured (71.2%) and predicted (67.1%) total removal, especially in aeration tanks. Equalization tanks (actual, 20.5%, predicted, 16.9%), primary clari-flocculator (actual, 14.2%, predicted, 7.7%), and secondary clarifier units (actual, 29.5%, predicted, 16.8%) showed fairly acceptable differences in measured and predicted removal. The effect of other mechanisms on VOC removal need to be further explored owing to their major contribution to VOC removal. This study is the first attempt in understanding the mechanisms behind the removal of VOCs in each treatment unit, especially equalization tanks and clarifier units, which have been severely underestimated till date., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Chlorine bleaching technology (C process, CEH process, H process and theirs combination), which was identified as a primary formation source of PCDD/Fs, is still widely used by the vast majority of Chinese non-wood pulp and paper mills (non-wood PMs). The purpose of this study was to provide information and data support for further eliminating dioxin for non-wood PMs in China, and especially to evaluate the PCDD/Fs release reduction for those mills converting their pulp bleaching processes from CEH to ECF. The PCDD/Fs concentrations of the bleached pulp and bleaching wastewater with ECF bleaching were in the ranges of 0.13-0.8 ng TEQ kg -1 , and 0.15-1.9 pg TEQ L -1 , respectively, which were far lower than those with CEH process, indicating that the ECF process is an effective alternative bleaching technology to replace CEH in Chinese non-wood PMs to reduce dioxin release. The release factor via flue gas of the alkali recovery boiler in Chinese non-wood PMs was first reported to be 0.092 μg TEQ Ad t -1 in this study. On the assumption that pulp bleaching processes of all Chinese non-wood PMs were converted from CEH to ECF, the annual release of PCDD/Fs via the bleaching wastewater and bleached pulp would be reduced by 79.1%, with a total of 1.60 g TEQ., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Sealing layers made of two alkaline paper mill by-products, fly ash and green liquor dregs, were placed on top of 50-year-old sulfide-containing tailings as a full-scale remediation approach. The performance and effectiveness of the sealing layers with high water content for an oxygen barrier and low hydraulic conductivity for a sealing layer in preventing the formation of acid rock drainage were evaluated 5 years after the remediation. The leaching behavior of the covered tailings was studied using batch leaching tests (L/S ratio 10 L/kg). The leaching results revealed that, in general, the dregs- and ash-covered tailings released relatively lower concentrations of many elements contained in acid rock drainage compared to those from the uncovered tailings. A change in the chemical composition and mineralogical state of the tailings was observed for the tailings beneath the covers. The increase in pH caused by the alkaline materials promoted metal precipitation. Geochemical modeling using PHREEQC confirmed most of the geochemical changes of the covered tailings. Both the ash and dregs showed potential to function as sealing materials in terms of their geochemical properties. However, mobilization of Zn and Ni from the lower part of the dregs-covered tailings was observed. The same phenomenon was observed for the lower part of the ash-covered tailings. Ash showed advantages over dregs as a cover material; based on geochemical studies, the ash immobilized more elements than the dregs did. Lysimeters were installed below the sealing layers, and infiltrating water chemistry and hydrology were studied to monitor the amount and quality of the leachate percolating through.

In order to provide a basis for the reduction of food losses, our study analyzes individual food choice, eating and leftover behavior in a university canteen by consideration of personal, social and environmental determinants. Based on an extended literature review, a structural equation model is derived and empirically tested for a sample of 343 students. The empirical estimates support the derived model with a good overall model fit and sufficient R 2 values for dependent variables. Hence, our results provide evidence for a general significant impact of behavioral intention and related personal and social determinants as well as for the relevance of environmental/situational determinants such as portion sizes and palatability of food for plate leftovers. Moreover, we find that environmental and personal determinants are interrelated and that the impact of different determinants is relative to perceived time constraints during a visit of the university canteen. Accordingly, we conclude that simple measures to decrease avoidable food waste may take effects via complex and interrelated behavioral structures and that future research should focus on these effects to understand and change food leftover behavior., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Ricinus communis L. (castor bean or castor oil plant) was found growing on metal-contaminated sites (4) of peri-urban Greater Hyderabad comprises of erstwhile industrial areas viz Bollaram, Patancheru, Bharatnagar, and Kattedan industrial areas. During 2013-2017, about 60 research papers have appeared focusing the role of castor bean in phytoremediation of co-contaminated soils, co-generation of biomaterials, and environmental cleanup, as bioenergy crop and sustainable development. The present study is focused on its use as a multipurpose phytoremediation crop for phytostabilization and revegetation of waste disposed peri-urban contaminated soils. To determine the plant tolerance level, metal accumulation, chlorophyll, protein, proline, lipid peroxidation, oil content, and soil properties were characterized. It was noticed that the castor plant and soils have high concentration of metals such as cadmium (Cd), lead (Pb), iron (Fe), manganese (Mn), and zinc (Zn). The soils have high phosphorous (P), adequate nitrogen (N), and low concentration of potassium (K). Iron (Fe) concentrations ranged from1672±50.91 to 2166±155.78 mg kg -1 in the soil. The trend of metal accumulation Fe>Zn>Mn>Pb>Cd was found in different plant parts at polluted sites. The translocation of Cd and Pb showed values more than one in industrial areas viz Bollaram, Kattedan, and Bharatnagar indicating the plants resistance to metal toxicity. Chlorophyll and protein content reduced while proline and malondialdehyde increased due to its tolerance level under metal exposure. The content of ricinoleic acid was higher, and the fatty acids composition of polluted areas was almost similar to that of the control area. Thus, R. communis L. can be employed for reclamation of heavy metal contaminated soils.

Tilt angle of parallel-plate electrodes (APE) is very important as it improves the economy of diffusion controlled Electrocoagulation (EC) processes. This study aimed to evaluate and optimize APE of a self-made EC device including integrally rotary electrodes, at a fixed current density of 120 Am -2 . The APEs investigated in this study were selected at 0°, 30°, 45°, 60°, 90°, and a special value (α (d) ) which was defined as a special orientation of electrode when the upper end of anode and the lower end of cathode is in a line vertical to the bottom of reactor. Experiments were conducted to determine the optimum APE for demulsification process using four evaluation indexes, as: oil removal efficiency in the center between electrodes; energy consumption and Al consumption, and besides, a novel universal evaluation index named as evenness index of oil removal efficiency employed to fully reflect distribution characteristics of demulsification efficiency. At a given plate spacing of 4 cm, the optimal APE was found to be α (d) because of its potential of enhancing the mass transfer process within whole EC reactor without addition, external mechanical stirring energy, and finally the four evaluation indexed are 97.07%, 0.11 g Al g -1 oil, 2.99 kwhkg -1 oil, 99.97% and 99.97%, respectively., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Mesoporous high-surface-area activated carbon (MHSA-AC), which has a honeycomb structure, was produced from coconut shells by simultaneous chemical and physical activation and used for the rapid adsorption of an anionic dye, namely acid orange 10 (AO10), from water. Owing to its porosity and high Brunauer-Emmett-Teller surface area (2283.91 m 2 g -1 ), MHSA-AC is a highly efficient adsorbent. It also has good biocompatibility and is a good immobilization carrier; the grooves on the MHSA-AC surface facilitate immobilization. Here, a new, highly efficient, and environmentally friendly simultaneous adsorption and biodegradation (SAB) process was developed. Highly concentrated AO10 (6000 mg L -1 , 20 mL) was removed with an efficiency of 100% (pH = 7, 35 °C) by SAB using cells immobilized on MHSA-AC (500 mg). The immobilized cells were used directly, without pretreatment; the SAB process is therefore simple and has good potential for application in the treatment of dyes in industrial wastewater., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

A novel chemically bonded phosphate ceramic (CBPC) binder was developed for the simultaneous treatment of the top five most toxic heavy metals (Hg, Pb, As, Cr, and Cd). Various CBPC binders were synthesized and tested, and their toxicity characteristic leaching procedure (TCLP) values were obtained. A magnesium/calcium-potassium phosphate ceramic binder with FeCl 2 (M/C-KP-FeCl 2 ) simultaneously stabilized multiple heavy metals. The TCLP value of the final product for industrial waste (IW) treatment using the M/C-KP-FeCl 2 technology was well below the Universal Treatment Standard (UTS). Additionally, the compressive strength of the final product was below the US Nuclear Regulatory Commission Standard., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

A hybrid photo-catalyst, TiO 2 -ZnO, was synthesized by immobilizing ZnO on commercial TiO 2 (aeroxide P25). Activated carbon (AC) was subsequently used to support the hybrid, thus forming a TiO 2 -ZnO/AC composite catalyst. Fourier transform infrared (FTIR) analysis and scanning electron microscopy integrated with energy-dispersive X-ray spectroscopy (SEM-EDX) investigations revealed successful catalyst synthesis. Optical properties of the hybrid determined from photoluminescence (PL) and Ultraviolet-visible (UV-vis) spectroscopy confirmed a restrained recombination of electron-hole pairs and reduced energy band gap due to a successful heterojunction formation. The prepared catalysts were used to photodecolorise vinasse in a 12-W UVC batch photoreactor. TiO 2 -ZnO had improved photocatalytic activity compared with TiO 2 and ZnO separately. On supporting the hybrid onto AC, both adsorption and photocatalytic activities were further enhanced with improved overall color removal of 86% from 68%. Photodecolorisation followed the pseudo-first-order reaction model with the rate constant ([Formula: see text]) observed decreasing from 0.0701 to 0.0436 min -1 on increasing the initial concentration from 5,000 to 14,000 ppm. The UV process was found to be 33-fold less energy intensive for color reduction as compared to total organic carbon (TOC) reduction. Formation of nitrates during the photodecolorisation process was attributed to the mineralization of nitrogen heteroatoms in the color-causing melanoidin compounds.

Background: Food banks seeking to rescue and redistribute highly nutritious perishable foods to simultaneously alleviate food insecurity and reduce food waste often encounter practical, ethical, and political dilemmas., Objectives: We present a case study of "Leket Israel," an Israeli food bank that uses an effective large-scale logistical model for the rescue and redistribution of perishable food and discuss the challenges and solutions it offers., Results: The organization operates in a rich country plagued with poverty and inequality, where the government passively encourages nongovernmental organizations to respond to the serious and growing problem of food insecurity. Operating under a business-to-business model, Leket Israel distributes food via intermediary nonprofit organizations (NPOs), enriching the food they provide with fresh produce. Food is obtained through an Agricultural Gleaning project, Self-Growing Farm project, and Meal Rescue project. The partnering NPOs then distribute the food to people in need. Although the rescue and redistribution of highly perishable food is more costly and complex than acquiring, storing, and distributing dried and staple foods and it requires specialized knowledge and infrastructure in order to maintain rigorous safety standards, it improves the nutritional quality of the aid. In 2015, Leket Israel distributed 15 217 389 kg of food, 90% of which was fruit and vegetables, to 180 partnering NPOs nationwide, reaching an estimated 175 000 recipients., Conclusion: "Leket Israel" offers a valuable model that can be studied and emulated by international nutrition scientists, practitioners, and policy makers who are seeking to reduce food insecurity and food waste in other countries.

The present work aimed to develop a novel composite material made up of activated cow bone powder (CBP) as a starting material for reducing chemical oxygen demand (COD) and ammonia-nitrogen (NH 3 N) from palm oil mill effluent (POME). The optimization of the reduction efficiency was investigated using response surface methodology (RSM). Six independent variables used in the optimization experiments include pH (4-10), speed (0.27-9.66 rcf), contact time (2-24 h), particle size (1-4.35 mm), dilution factor (100-500) and adsorbent dosage (65-125 g/L). The chemical functional groups were determined using Fourier transform irradiation (FTIR). The elemental composition were detected using SEM-EDX, while thermal decomposition was investigated using thermo gravimetric analysis (TGA) in order to determine the effects of carbonization temperature on the adsorbent. The results revealed that the optimal reduction of COD and NH 3 N from raw POME was observed at pH 10, 50 rpm, within 2 h and 3 mm of particle size as well as at dilution factor of 500 and 125 g L -1 of adsorbent dosage, the observed and predicted reduction were 89.60 vs. 85.01 and 75.61 vs. 74.04%, respectively for COD and NH 3 N. The main functional groups in the adsorbent were OH, NH, CO, CC, COC, COH, and CH. The SEM-EDX analysis revealed that the CBP-composite has a smooth surface with high contents of carbon. The activated CBP has very stable temperature profile with no significant weight loss (9.85%). In conclusion, the CBP-composite investigated here has characteristics high potential for the remediation of COD and NH 3 N from raw POME., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Dyes are used in textile, printing, leather, pharmaceutical, food and cosmetic industries. Dyes add color and pattern to materials. The presence of even very low concentration of dyes/dyes degradation products in effluent is highly toxic to humans and aquatic organisms. It is important to remove these dye degradation pollutants from the industrial effluents before their disposal. In recent years nanoparticles have been used for the removal of dyes from industrial waste water. Titanium dioxide nanostructures (TiO 2 NS) were synthesized via a one-step facile green process. The formation of TiO 2 NS was confirmed by Fourier transform infrared (FTIR) and Raman spectroscopy. Anatase (~76%) and rutile (~24%) phases were present, as determined by X-ray diffraction (XRD) analysis. X-ray photoelectron spectroscopy (XPS) was used to study the surface oxidation states of the TiO 2 NS. High resolution transmission electron microscopy (HR-TEM) images revealed that the samples had hexagonal and rectangular morphologies, with diameters of ~24-32nm. The TiO 2 NS were used to evaluate the photocatalytic activities of methylene blue (MB) and malachite green (MG) dyes under UV light and in dark conditions. After 60min of UV irradiation, nearly 71% of the MB and 78% of the MG was decolorized in the presence of as-synthesized TiO 2 NPs., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The aim of this work was the optimization of the enzyme hydrolysis of potato peel residues (PPR) for bioethanol production. The process included a pretreatment step followed by an enzyme hydrolysis using crude enzyme system composed of cellulase, amylase and hemicellulase, produced by a mixed culture of Aspergillus niger and Trichoderma reesei. Hydrothermal, alkali and acid pretreatments were considered with regards to the enhancement of enzyme hydrolysis of potato peel residues. The obtained results showed that hydrothermal pretreatment lead to a higher enzyme hydrolysis yield compared to both acid and alkali pretreatments. Enzyme hydrolysis was also optimized for parameters such as temperature, pH, substrate loading and surfactant loading using a response surface methodology. Under optimized conditions, 77 g L -1 of reducing sugars were obtained. Yeast fermentation of the released reducing sugars led to an ethanol titer of 30 g L -1 after supplementation of the culture medium with ammonium sulfate. Moreover, a comparative study between acid and enzyme hydrolysis of potato peel residues was investigated. Results showed that enzyme hydrolysis offers higher yield of bioethanol production than acid hydrolysis. These results highlight the potential of second generation bioethanol production from potato peel residues treated with onsite produced hydrolytic enzymes. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:397-406, 2017., (© 2017 American Institute of Chemical Engineers.)

With the enhancement of people's environmental consciousness, the treatment of wastewater was studied as the focus of this paper. Here we present a simple two-step extraction to realize efficient separation of fluorescent whitening agents VBL and cyclic utilization of surfactant to reduce the cost of wastewater treatment and environmental pollution. Firstly, the removal of VBL has been achieved by CPE using TX-114 as nonionic surfactant. The results showed that complete extraction was possible using 1% (w/w) TX-114 for VBL concentration not exceeding 17.5 mg/L, otherwise using a higher concentration of 1.5% (w/w) TX-114. Then the surfactant from the coacervate phase was recycled by changing the potential difference between phases. The morphology of micelles and solubilization mechanism of VBL were demonstrated through the observation of a fluorescent microscope. This method was successfully used to remove the VBL from wastewater sample and the surfactant could be reused several times.

Pollution prevention (P2) assessment was conducted by applying the three R's, reduce, reuse, and recycle, in a chemical industry for the purpose of reducing the amount of wastewater generated, reusing paint wastewater in the manufacture of cement bricks, recycling cooling water, and improving water usage efficiency. The results of this study showed that the annual wastewater flow generated from the paint manufacturing can be reduced from 1,100 m 3 to 488.4 m 3 (44.4% reduction) when a high-pressure hose is used. Two mixtures were prepared. The first mixture (A) contains cement, coarse aggregate, fine aggregate, Addicrete BVF, and clean water. The second mixture (B) contains the same components used in the first mixture, except that paint wastewater was used instead of the clean water. The prepared samples were tested for water absorption, toxicity, reactivity, compressive strength, ignitability, and corrosion. The tests results indicated that using paint wastewater in the manufacture of the cement bricks improved the mechanical properties of the bricks. The toxicity test results showed that the metals concentration in the bricks did not exceed the U.S. EPA limits. This company achieved the goal of zero liquid discharge (ZLD), especially after recycling 2,800 m 3 of cooling water. The total annual saving could reach $42,570 with a payback period of 41 days., Implications: This research focused on improving the water usage efficiency, reducing the quantity of wastewater generated, and potentially reusing wastewater in the manufacture of cement bricks. Reusing paint wastewater in the manufacture of the bricks prevents the hazardous pollutants in the wastewater (calcium carbonate, styrene acrylic resins, colored pigments, and titanium dioxide) from entering and polluting the surface water and the environment. We think that this paper will help to find the most efficient and cost-effective way to manage paint wastewater and conserve fresh water resources. We also believe that this paper provides a rich agenda for future research in water conservation and industrial wastewater reuse subjects.

Production of fumaric acid from alkali-pretreated corncob (APC) at high solids loading was investigated using a combination of separated hydrolysis and fermentation (SHF) and fed-batch simultaneous saccharification and fermentation (SSF) by Rhizopus oryzae. Four different fermentation modes were tested to maximize fumaric acid concentration at high solids loading. The highest concentration of 41.32 g/L fumaric acid was obtained from 20 % (w/v) APC at 38 °C in the combined SHF and fed-batch SSF process, compared with 19.13 g/L fumaric acid in batch SSF alone. The results indicated that a combination of SHF and fed-batch SSF significantly improved production of fumaric acid from lignocellulose by R. oryzae than that achieved with batch SSF at high solids loading.

Ferulic acid esterases (FAE) possess a large variety of biotechnological applications mainly based on their ability to release ferulic acid from lignocellulosic matrixes. The use of vine trimming shoots (VTS), an agricultural waste, as substrate for the generation of this kind of esterases represents an attractive alternative to change the consideration of VTS from residue to resource. Furthermore, xylanase, cellobiase, and cellulase activities were quantified. Six microorganisms were screened for FAE production by solid-state fermentation, and the effects of the additional supplementation and substrate size were also tested. Finally, the process was scaled-up to a horizontal bioreactor where the influence of aeration in enzymatic activities was evaluated. Thus, the optimal FAE activity (0.44 U/g dry VTS) was attained by Aspergillus terreus CECT 2808, in non-additional supplementation media, using the larger particles size of substrate (≤ 5 mm) and at a flow rate of 0.7 L/min.

Thermostable cellulases have wide variety of applications and distinctive advantages, but their low titer becomes the hurdle in their commercialization. In the present work, an assessment of optimum levels of significant factors (temperature, moisture ratio, inoculum size, and ammonium sulfate) and the effect of their interactions on production of thermostable CMCase, FPase, and β-glucosidase by Thermoascus aurantiacus RCKK under solid-state fermentation (SSF) was carried out using central composite design (CCD) of response surface methodology (RSM). The study revealed 33, 13, and 8 % improvement in FPase, CMCase, and β-glucosidase production, respectively. Moreover, crude cellulase from T. aurantiacus RCKK efficiently hydrolyzed office waste paper, algal pulp (Gracillaria verulosa), and biologically treated wheat straw at 60 °C with sugar release of about 830 mg/ml, 285 mg/g, and 260 mg/g of the substrate, respectively. The thermostable enzyme from T. aurantiacus RCKK holds potential to be used in biofuel industry.

Nowadays, bioethanol production is one of the most important technologies by the necessity to identify alternative energy resources, principally when based on inexpensive renewable resources. However, the costs of 2nd-generation bioethanol production using current biotechnologies are still high compared to fossil fuels. The feasibility of bioethanol production, by obtaining high yields and concentrations of ethanol, using low-cost medium, is the primary goal, leading the research done today. Batch Saccharomyces cerevisiae fermentation of high-density sugar from carob residues with different organic (yeast extract, peptone, urea) and inorganic nitrogen sources (ammonium sulfate, ammonium nitrate) was performed for evaluating a cost-effective ethanol production, with high ethanol yield and productivity. In STR batch fermentation, urea has proved to be a very promising nitrogen source in large-scale production of bioethanol, reaching an ethanol yield of 44 % (w/w), close to theoretical maximum yield value and an ethanol production of 115 g/l. Urea at 3 g/l as nitrogen source could be an economical alternative with a great advantage in the sustainability of ethanol production from carbohydrates extracted from carob. Simulation studies, with experimental data using SuperPro Design software, have shown that the bioethanol production biorefinery from carob wastes could be a very promising way to the valorization of an endogenous resource, with a competitive cost.

Assessment of sustainability will become more relevant for the food industry in the years to come. Analysis based on exergy, including the use of exergetic indicators and Grassmann diagrams, is a useful tool for the quantitative and qualitative assessment of the efficiency of industrial food chains. In this paper, we review the methodology of exergy analysis and the exergetic indicators that are most appropriate for use in the food industry. The challenges of applying exergy analysis in industrial food chains and the specific features of food processes are also discussed.

Heavy metal-resistant bacteria can be efficient bioremediators of metals and may provide an alternative or additional method to conventional methods of metal removal. In this study, 10 bacterial isolates were isolated from soil samples of a sugar industry, located at Peshawar, Pakistan. Morphological, physiological, and biochemical characteristics of these isolates were observed. Sequence analysis (16S ribosomal RNA) revealed that isolated strains were closely related to the species belonging to the genera Pseudomonas, Arthrobacter, Exiguobacterium, Citrobacter, and Enterobacter Bacterial isolates were resistant with a minimum inhibitory concentration (500-900 ppm) to lead ion (Pb(2+)), (500-600 ppm) nickel ion (Ni(2+)), (500-800 ppm) copper ion (Cu(2+)), and (600-800 ppm) chromium ion (Cr(3+)) in solid media. Furthermore, biosorption of metals proved considerable removal of heavy metals by isolated metal-resistant strains. Pseudomonas sp. reduced 37% (Pb(2+)), 32% (Ni(2+)), 29% (Cu(2+)), and 32% (Cr(3+)) and was thus found to be most effective, whereas Enterobacter sp. reduced 19% (Pb(2+)), 7% (Ni(2+)), 14% (Cu(2+)), and 21% (Cr(3+)) and was found to be least effective. While average reduction of Pb(2+), Ni(2+), Cu(2+), and Cr(3+) by Citrobacter sp. was found to be 24%, 18%, 23%, and 27%, respectively, among recognized species. This study revealed that Pseudomonas sp. may provide a new microbial community that can be used for enhanced remediation of contaminated environment., (© The Author(s) 2015.)

In the present study, a novel activated carbon was prepared from low-cost eucalyptus seeds, which was utilised for the effectively removal of toxic zinc from the water/wastewater. The prepared adsorbent was studied by Fourier transform infrared spectroscopy and scanning electron microscopic characterisation studies. Adsorption process was experimentally performed for optimising the influencing factors such as adsorbent dosage, solution pH, contact time, initial zinc concentration, and temperature for the maximum removal of zinc from aqueous solution. Adsorption isotherm of zinc removal was ensued Freundlich model, and the kinetic model ensued pseudo-second order model. Langmuir monolayer adsorption capacity of the adsorbent for zinc removal was evaluated as 80.37 mg/g. The results of the thermodynamic studies suggested that the adsorption process was exothermic, thermodynamically feasible and impulsive process. Finally, a batch adsorber was planned to remove zinc from known volume and known concentration of wastewater using best obeyed model such as Freundlich. The experimental details showed the newly prepared material can be effectively utilised as a cheap material for the adsorption of toxic metal ions from the contaminated water.

Background: As the most abundant renewable resources, lignocellulosic materials are ideal candidates as alternative feedstock for bioethanol production. Cassava residues (CR) are byproducts of the cassava starch industry which can be mixed with lignocellulosic materials for ethanol production. The presence of lignin in lignocellulosic substrates can inhibit saccharification by reducing the cellulase activity. Simultaneous saccharification and fermentation (SSF) of furfural residues (FR) pretreated with green liquor and hydrogen peroxide (GL-H2O2) with CR saccharification liquid was investigated. The final ethanol concentration, yield, initial rate, number of live yeast cells, and the dead yeast ratio were compared to evaluate the effectiveness of combining delignificated lignocellulosic substrates and starchy substrates for ethanol production., Results: Our results indicate that 42.0 % of FR lignin removal was achieved on FR using of 0.06 g H2O2/g-substrate and 9 mL GL/g-substrate at 80 °C. The highest overall ethanol yield was 93.6 % of the theoretical. When the ratio of 0.06 g/g-H2O2-GL-pretreated FR to CR was 5:1, the ethanol concentration was the same with that ratio of untreated FR to CR of 1:1. Using 0.06 g/g-H2O2-GL-pretreated FR with CR at a ratio of 2:1 resulted in 51.9 g/L ethanol concentration. Moreover, FR pretreated with GL-H2O2 decreased the concentration of byproducts in SSF compared with that obtained in the previous study., Conclusions: The lignin in FR would inhibit enzyme activity and GL-H2O2 is an advantageous pretreatment method to treat FR and high intensity of FR pretreatment increased the final ethanol concentration. The efficiency of ethanol fermentation of was improved when delignification increased. GL-H2O2 is an advantageous pretreatment method to treat FR. As the pretreatment dosage of GL-H2O2 on FR increased, the proportion of lignocellulosic substrates was enhanced in the SSF of the substrate mixture of CR and FR as compared with untreated FR. Moreover, the final ethanol concentration was increased with a high ethanol yield and lower byproduct concentrations.

Waste generated in construction and demolition processes comprised around 50% of the solid waste in South Korea in 2013. Many cases show that design validation based on building information modeling (BIM) is an effective means to reduce the amount of construction waste since construction waste is mainly generated due to improper design and unexpected changes in the design and construction phases. However, the amount of construction waste that could be avoided by adopting BIM-based design validation has been unknown. This paper aims to estimate the amount of construction waste prevented by a BIM-based design validation process based on the amount of construction waste that might be generated due to design errors. Two project cases in South Korea were studied in this paper, with 381 and 136 design errors detected, respectively during the BIM-based design validation. Each design error was categorized according to its cause and the likelihood of detection before construction. The case studies show that BIM-based design validation could prevent 4.3-15.2% of construction waste that might have been generated without using BIM., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Agricultural wastes (AW) are produced in huge quantities worldwide and may cause detrimental effects on environmental quality, affecting soil, water, and air quality. Given the growing soil degradation worldwide, the need for more food of good quality and therefore the intensified agriculture, it is important to develop recycling plans even for those types of treated AW (e.g., composts) that are not considered hazardous. Two strategic approaches for safe and sustainable landspreading of organic wastes are proposed, depending on wastes properties and hazard potential, i.e., an approach appropriate for traditionally used wastes (manures and composts) and another approach for wastes that are potentially hazardous or hazardous and should only be reused under specific restrictions. Both approaches foresee concrete steps, require close cooperation between farmers and local/regional authorities, and are appropriate to ensure environmental sustainability at AW recycling or disposal areas. Desktop and web application tools are also presented that are anticipated to assist authorities in implementing their monitoring strategies.

The continuing horrors of military conflicts and terrorism often involve the use of chemical warfare agents (CWAs) and toxic industrial chemicals (TICs). Many CWA and TIC exposures are difficult to treat due to the danger they pose to first responders and their rapid onset that can produce death shortly after exposure. While the specific mechanism(s) of toxicity of these agents are diverse, many are associated either directly or indirectly with increased oxidative stress in affected tissues. This has led to the exploration of various antioxidants as potential medical countermeasures for CWA/TIC exposures. Studies have been performed across a wide array of agents, model organisms, exposure systems, and antioxidants, looking at an almost equally diverse set of endpoints. Attempts at treating CWAs/TICs with antioxidants have met with mixed results, ranging from no effect to nearly complete protection. The aim of this commentary is to summarize the literature in each category for evidence of oxidative stress and antioxidant efficacy against CWAs and TICs. While there is great disparity in the data concerning methods, models, and remedies, the outlook on antioxidants as medical countermeasures for CWA/TIC management appears promising., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Proteomic analysis technology helped to study and assess protein profile of blood serum in residents of area influenced bymetallurgic industrial releases. Findings are that poor quality of ambient air in populated area concerning concentrations of vanadium, nickel, manganese (up to 24-44 RfCchr) and stable presence of these elements in drinkable water (up to 0,006 RfD) cause mainly aerogenous chronic exposure at 0,00025-0,0022 mg/(kg-day). The exposed individuals demonstrate higher (3,5-3,8 times vs. unexposed ones and reference level) serum level of vanadium (0,0023 to 0,003 mg/dma), nickel (0,06-0,11 mg/dm) and manganese (0,036-0,048. mg/dm³). The authors demonstrated changes in serum proteomic profile associated with serum levels of vanadium and nickel (share contribution of vanadium and nickel equalled 15-20%) and manifested as increase of relative volume of transtyretine, apolipoprotein A-I, lower relative volume of haptoglobin. Increased serum level of vanadium disorders transport of apoproteins incorporated into lipoproteins; increased serum level of nickel activates hemolysis of RBC, disorders speed of hemoglobin-haptoglobin complex formation and its subsequent utilization by hepatocytes. Revealed molecular and cellular disorders enable to forecast thyroid disorders, hematologic diseases, cholesterol metabolism disorders.

Nowadays there is worldwide interest in developing a sustainable economy where biobased chemicals are the lead actors. Various potential feedstocks are available including glycerol, rapeseed meal and municipal solid waste (MSW). For biorefinery applications the byproduct streams from distilleries and bioethanol plants, such as wheat-based dried distiller's grain with solubles (DDGS), are particularly attractive, as they do not compete for land use. Wheat DDGS is rich in polymeric sugars, proteins and oils, making it ideal as a current animal feed, but also a future substrate for the synthesis of fine and commodity chemicals. This review focuses on the extraction and valorization of the protein fraction of wheat DDGS as this has received comparatively little attention to date. Since wheat DDGS production is expected to increase greatly in the near future, as a consequence of expansion of the bioethanol industry in the UK, strategies to valorize the component fractions of DDGS are urgently needed., (Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.)

Biodegradable polymers are currently viable alternatives to traditional synthetic polymers. For instance, polyhydroxybutyrate (PHB) is intracellularly produced and accumulated by Bacillus species, among others. This study reports several wild-type Bacillus strains with the ability to accumulate PHB using raw glycerol from biodiesel production as the sole carbon source. Out of 15 strains from different sources, B. megaterium B2 was selected as the most promising strain for further statistical optimization of the medium composition. Plackett-Burman and central composite designs were used to establish key variables and optimal culture conditions for PHB production using both 250-mL shake flasks and a 7.5-L bioreactor. Temperature and concentrations of glycerol and Na2HPO4 are the experimental variables with the most significant influence on PHB production by B2. After 14 hours of fermentation in shake flasks with optimized medium, B2 produced 0.43 g/L of PHB with a 34% accumulation in the cells. In contrast, under the same conditions, a maximum PHB concentration of 1.20 g/L in the bioreactor was reached at 11 hours. These values correspond to a 48% and 314% increase in PHB production compared to the initial culture conditions. These results suggest the potential of B2 as a PHB producer using raw glycerol, which is an inexpensive, abundant and readily available carbon source., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A field experiment using tannery sludge as a soil amendment material and palmarosa (Cymbopogon martinii) as a potential phytostabilizer was conducted to investigate their synergistic effect in relation to the improvement in soil quality/property. Three consecutive harvests of two cultivars of palmarosa-PRC-1 and Trishna, were examined to find out the influence of different tannery sludge doses on their herb, dry matter, essential oil yield and heavy metal accumulation. Soil fertility parameters (N, P, K, Organic carbon) were markedly affected by different doses of sludge. Enhanced soil nitrogen was positively correlated with herb yield (0.719*) and plant height (0.797*). The highest dose of tannery sludge (100 t ha(-1)) exhibited best performance than other treatments with respect to herb, dry matter and oil yield in all three harvests. Trishna was found to be superior to PRC-1 in relation to same studied traits. Quality of oil varied, but was insignificant statistically. Uptake of heavy metals followed same order (Cr>Ni>Pb>Cd) in roots and shoots. Translocation factor <1 for all trace elements and Bioconcentration factor >1 was observed in case of all heavy metals. Overall, tannery sludge enhanced the productivity of crop and metal accumulation occurred in roots with a meager translocation to shoots, hence it can be used as a phytostabiliser. The major advantage of taking palmarosa in metal polluted soil is that unlike food and agricultural crops, the product (essential oil) is extracted by hydro-distillation and there is no chance of oil contamination, thus is commercially acceptable., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Bioethanol production output has increased steadily over the last two decades and is now beginning to become competitive with traditional liquid transportation fuels due to advances in engineering, the identification of new production host organisms, and the development of novel biodesign strategies. A significant portion of these efforts has been dedicated to mitigating the toxicological challenges encountered across the bioethanol production process. From the release of potentially cytotoxic or inhibitory compounds from input feedstocks, through the metabolic co-synthesis of ethanol and potentially detrimental byproducts, and to the potential cytotoxicity of ethanol itself, each stage of bioethanol production requires the application of genetic or engineering controls that ensure the host organisms remain healthy and productive to meet the necessary economies required for large scale production. In addition, as production levels continue to increase, there is an escalating focus on the detoxification of the resulting waste streams to minimize their environmental impact. This review will present the major toxicological challenges encountered throughout each stage of the bioethanol production process and the commonly employed strategies for reducing or eliminating potential toxic effects.

The optimisation of electrokinetic remediation of an alluvial soil, locally named as Holyrood-Lunas from Sri Gading Industrial Area, Batu Pahat, Johor, Malaysia, had been conducted in this research. This particular soil was chosen due to its relatively high level of background radiation in a range between 139.2 and 539.4 nGy h(-1). As the background radiation is correlated to the amount of parent nuclides, (238)U and (232)Th, hence, a remediation technique, such as electrokinetic, is very useful in reducing these particular concentrations of heavy metal and radionuclides in soils. Several series of electrokinetics experiments were performed in laboratory scale in order to study the influence of certain electrokinetic parameters in soil. The concentration before (pre-electrokinetic) and after the experiment (post-electrokinetic) was determined via X-ray fluorescence (XRF) analysis technique. The best electrokinetic parameter that contributed to the highest achievable concentration removal of heavy metals and radionuclides on each experimental series was incorporated into a final electrokinetic experiment. Here, High Pure Germanium (HPGe) was used for radioactivity elemental analysis. The XRF results suggested that the most optimised electrokinetic parameters for Cr, Ni, Zn, As, Pb, Th and U were 3.0 h, 90 volts, 22.0 cm, plate-shaped electrode by 8 × 8 cm and in 1-D configuration order whereas the selected optimised electrokinetic parameters gave very low reduction of (238)U and (232)Th at 0.23 ± 2.64 and 2.74 ± 23.78 ppm, respectively., (© The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)