Search

Due to the ubiquity of textiles in the lives, electronic textiles (E‐textiles) have emerged as a future technology capable of addressing a myriad of challenges from mixed reality interfaces, on‐garment climate control, patient diagnostics, and interactive athletic wear. However, providing sufficient electrical power in a textile form factor has remained elusive. To address this issue, different approaches are discussed, starting with supercapacitors' advantages and limitations and material choices for textile‐based supercapacitors before discussing proper data analysis and design considerations of textile‐based energy storage to power wearable electronics. [ABSTRACT FROM AUTHOR]

The rise of the Internet of Things has spurred extensive research on integrating conductive materials into textiles to turn them into sensors, antennas, energy storage devices, and heaters. MXenes, owing to their high electrical conductivity and solution processability, offer an efficient way to add conductivity and electronic functions to textiles through simple dip coating. However, manual development of MXene‐coated textiles restricts their quality, quantity, and variety. Here, a versatile automated yarn dip coater tailored for producing continuously high‐quality MXene‐coated yarns and conducted the most comprehensive MXene‐yarn dip coating study to date is developed. Compared to manual methods, the automated coater provides lower resistance, superior uniformity, faster speed, and reduced MXene consumption. It also enables rapid coating parameter optimization, resulting in a thin Ti3C2 coating uniform over a 1 km length on a braided Kevlar yarn while preserving its excellent mechanical properties (over 800 MPa) and adding Joule heating and damage sensing to composites reinforced by the yarns. By dip‐coating five different yarns of varying materials, diameters, structures, and chemistries, new insights into MXene‐yarn interactions are gained. Thus, the automated dip coating presents ample opportunities for scalable integration of MXenes into a wide range of yarns for diverse functions and applications. [ABSTRACT FROM AUTHOR]

Driving the pseudocapacitive redox intercalation in 2DMXenes with neutral electrolytes is important for safer, more sustainable, and improved electrochemical charge storage. Single transition metal MXenes, such as Ti3C2, have shown great promise for energy storage, owing to their high conductivity and redox activity. Mixed metallic MXenes, such as out‐of‐plane ordered Mo2Ti2C3, have remained underexplored in energy storage because of the absence of redox activity in most of the electrolytes. Simultaneous structural modifications and instigating intercalation pseudocapacitance in neutral electrolytes could be a viable strategy for enhancing their electrochemical properties. Herein, a facile synthesis of partially oxidized Mo2Ti2C3 MXene (PO‐Mo2Ti2C3) exhibiting improved charge storage capability is demonstrated. Optical, structural, and spectroscopic analyses indicate the formation of oxide nanostructures upon thermal oxidation of Mo2Ti2C3. This leads to an enhanced energy storage capability with remarkably improved cyclability as well as a high Coulombic efficiency in a neutral LiCl electrolyte. This work highlights the importance of structural modifications of MXenes to enhance their charge storage and shows the promise of less explored double transition metal MXenes in energy storage. [ABSTRACT FROM AUTHOR]

Provoked by concerns about climate change, resource depletion and economic recession, the concept of food security has experienced a renaissance in international policy and research agendas. Despite this interest, the problem of food insecurity in wealthy countries has still not received enough attention. We argue that it is worthy of research and policy focus, because by examining the experiences and perceptions of food security amongst the "global rich", we can develop more critical understandings of the implications of neoliberal constructions of the consumer as a driving force in moves towards more secure food systems. The paper draws on empirical data from shoppers in the United Kingdom to make three key arguments. First, it is important to retain the issue of economic access to food at the heart of discussions of food security, so that the concept is not reduced to the problem of how to increase agricultural productivity. Second, it is necessary to recognize the importance of food quality to consumer perceptions of household food security. Third, consumers do not necessarily share the neoliberal view that consumer choice is the engine for sustainability and food security. On the contrary, consumers in our research were well aware that food prices and the choices made available are shaped by forces beyond the control of individual shoppers. Overall, they expressed uncertainty about what food security means, about the causes of problems in the food system and about who should be responsible for ensuring access to affordable food for healthy living, for all. (Contains 4 tables.)

While transition‐metal oxides such as α‐MoO3 provide high capacity, their use is limited by modest electronic conductivity and electrochemical instability in aqueous electrolytes. Two‐dimensional (2D) MXenes, offer metallic conductivity, but their capacitance is limited in aqueous electrolytes. Insertion of partially solvated cations into Ti3C2 MXene from lithium‐based water‐in‐salt (WIS) electrolytes enables charge storage at positive potentials, allowing a wider potential window and higher capacitance. Herein, we demonstrate that α‐MoO3/Ti3C2 hybrids combine the high capacity of α‐MoO3 and conductivity of Ti3C2 in WIS (19.8 m LiCl) electrolyte in a wide 1.8 V voltage window. Cyclic voltammograms reveal multiple redox peaks from α‐MoO3 in addition to the well‐separated peaks of Ti3C2 in the hybrid electrode. This leads to a higher specific charge and a higher rate capability compared to a carbon and binder containing α‐MoO3 electrode. These results demonstrate that the addition of MXene to less conductive oxides eliminates the need for conductive carbon additives and binders, leads to a larger amount of charge stored, and increases redox capacity at higher rates. In addition, MXene encapsulated α‐MoO3 showed improved electrochemical stability, which was attributed to the suppressed dissolution of α‐MoO3. The work suggests that oxide/MXene hybrids are promising for energy storage. [ABSTRACT FROM AUTHOR]

There are few reliable data sets to inspire confidence in policymakers that soil organic carbon (SOC) can be measured on farms. We worked with farmers in the Tamar Valley region of southwest England to select sampling sites under similar conditions (soil type, aspect and slope) and management types. Topsoils (2–15 cm) were sampled in autumn 2015, and percentage soil organic matter (%SOM) was determined by loss on ignition and used to calculate %SOC. We also used the stability of macroaggregates in cold water (WSA) ('soil slaking') as a measure of 'soil health' and investigated its relationship with SOC in the clay‐rich soils. %SOM was significantly different between management types in the order woodland (11.1%) = permanent pasture (9.5%) > ley‐arable rotation (7.7%) = arable (7.3%). This related directly to SOC stocks that were larger in fields under permanent pasture and woodland compared with those under arable or ley‐arable rotation whether corrected for clay content (F = 8.500, p <.0001) or not (F = 8.516, p <.0001). WSA scores were strongly correlated with SOC content whether corrected for clay content (SOCadjR2 =.571, p <.0001) or not (SOCunadjR2 = 0.490, p =.002). Time since tillage controlled SOC stocks and WSA scores, accounting for 75.5% and 51.3% of the total variation, respectively. We conclude that (1) SOC can be reliably measured in farmed soils using accepted protocols and related to land management and (2) WSA scores can be rapidly measured in clay soils and related to SOC stocks and soil management. [ABSTRACT FROM AUTHOR]

Both nonstatutory community-based catchment management groups and existing statutory groups seek effective environmental management characterised by public participation, collaborative working and decentralised modes of assessment, planning and decision making. The characteristics and challenges of catchment management for water resources and protection of water quality require such approaches, and an expansion of both community-based and state-led initiatives has been evident in the United Kingdom. Available information about these developments is, however, limited and this paper reports survey findings of such initiatives, providing a mid-to-late 2009 'snapshot' of the situation in England and Wales. Catchment management groups are profiled in terms of size, organisational structure, membership, financing, technology transfer, policy influence and other outcomes. The results are interpreted with reference to a growing international literature, the potential sustainability, effectiveness and impact of groups and environmental governance challenges, including those posed by the European Union Water Framework Directive. [ABSTRACT FROM AUTHOR]

The origin of MXene's excellent electromagnetic shielding performance is not fully understood. MXene films, despite being inhomogeneous at the nanometer scale, are often treated as if they are compared to bulk conductors. It is reasonable to wonder if the treatment of MXene as a homogeneous material remains valid at very small film thickness and if it depends on the interlayer spacing. The goal of the present work is to test if the homogeneous material model is applicable to nanometer‐thin Ti3C2Tx MXene films and, if so, to investigate how the model parameters may depend on variations in MXene interlayer spacings. MXene films containing flakes with interlayer spacing between 1.9 and 5.5 Å have been prepared using various intercalating agents. It is shown that modeling the films as being homogeneous agrees with experimental tests in the microwave frequency range. Microwave conductivity and dielectric constant parameters are estimated for the homogeneous film model by fitting measured results. The direct current (DC) conductivity matches the estimated microwave conductivity on the order of magnitude. A highly effective dielectric constant provides a good fit for the lower conductivity MXene films. Optical absorption agrees with the homogeneous material model of thin films as well. [ABSTRACT FROM AUTHOR]

MXenes are promising passive components that enable lithium‐sulfur batteries (LSBs) by effectively trapping lithium polysulfides (LiPSs) and facilitating surface‐mediated redox reactions. Despite numerous studies highlighting the potential of MXenes in LSBs, there are no systematic studies of MXenes’ composition influence on polysulfide adsorption, which is foundational to their applications in LSB. Here, a comprehensive investigation of LiPS adsorption on seven MXenes with varying chemistries (Ti2CTx, Ti3C2Tx, Ti3CNTx, Mo2TiC2Tx, V2CTx, Nb2CTx, and Nb4C3Tx), utilizing optical and analytical spectroscopic methods is performed. This work reports on the influence of polysulfide concentration, interaction time, and MXenes’ chemistry (transition metal layer, carbide and carbonitride inner layer, surface terminations and structure) on the amount of adsorbed LiPSs and the adsorption mechanism. These findings reveal the formation of insoluble thiosulfate and polythionate complex species on the surfaces of all tested MXenes. Furthermore, the selective adsorption of lithium and sulfur, and the extent of conversion of the adsorbed species on MXenes varied based on their chemistry. For instance, Ti2CTx exhibits a strong tendency to adsorb lithium ions, while Mo2TiC2Tx is effective in trapping sulfur by forming long‐chain polythionates. The latter demonstrates a significant conversion of intermediate polysulfides into low‐order species. This study offers valuable guidance for the informed selection of MXenes in various functional components benefiting the future development of high‐performance LSBs. [ABSTRACT FROM AUTHOR]