Search

We investigated the structural, elastic, electronic, vibrational, optical, thermodynamic and a number of thermophysical properties of W2N3 in this study using DFT based formalisms. The mechanical and dynamical stabilities have been confirmed. The Pugh and Poisson ratios are located quite close to the brittle to ductile borderline. The electronic band structure and energy density of states show metallic behavior. The Fermi surface features are investigated. The analysis of charge density distribution map clearly shows that W atoms have comparatively high electron density around than the N atoms. Presence of covalent bondings are anticipated. High melting temperature and high phonon thermal conductivity at room temperature of W2N3 imply that the compound has potential to be used as a heat sink system. The optical characteristics demonstrate anisotropy for W2N3. The compound can be used in optoelectronic device applications due to its high absorption coefficient and low reflectivity in the visible to ultraviolet spectrum. Furthermore, the quasiharmonic Debye model is used to examine temperature and pressure dependent thermal characteristics for the first time., Comment: Submitted to Journal of Alloys and Compounds

Protecting software supply chains from malicious packages is paramount in the evolving landscape of software development. Attacks on the software supply chain involve attackers injecting harmful software into commonly used packages or libraries in a software repository. For instance, JavaScript uses Node Package Manager (NPM), and Python uses Python Package Index (PyPi) as their respective package repositories. In the past, NPM has had vulnerabilities such as the event-stream incident, where a malicious package was introduced into a popular NPM package, potentially impacting a wide range of projects. As the integration of third-party packages becomes increasingly ubiquitous in modern software development, accelerating the creation and deployment of applications, the need for a robust detection mechanism has become critical. On the other hand, due to the sheer volume of new packages being released daily, the task of identifying malicious packages presents a significant challenge. To address this issue, in this paper, we introduce a metadata-based malicious package detection model, MeMPtec. This model extracts a set of features from package metadata information. These extracted features are classified as either easy-to-manipulate (ETM) or difficult-to-manipulate (DTM) features based on monotonicity and restricted control properties. By utilising these metadata features, not only do we improve the effectiveness of detecting malicious packages, but also we demonstrate its resistance to adversarial attacks in comparison with existing state-of-the-art. Our experiments indicate a significant reduction in both false positives (up to 97.56%) and false negatives (up to 91.86%).

In recent years, the investigation of novel materials for various technological applications has gained much importance in materials science research. Tri-molybdenum phosphide (Mo3P), a promising transition metal phosphide (TMP), has gathered significant attention due to its unique structural and electronic properties, which already make it potentially valuable system for catalytic and electronic device applications. Through an in-depth study using the density functional theory (DFT) calculations, this work aims to clarify the basic properties of the Mo3P compound at different pressures. In this work, we have studied the structural, elastic, optoelectronic and thermophysical properties of binary Mo3P compound. In this investigation, we varied uniform hydrostatic pressure from 0 GPa to 30 GPa. A complete geometrical optimization for structural parameters is performed and the obtained values are in good accord with the experimental values where available. It is also found that Mo3P possesses very low level of elastic anisotropy, reasonably good machinability, ductile nature, relatively high Vickers hardness, high Debye temperature and high melting temperature. Thermomechanical properties indicate that the compound has potential to be used as a thermal barrier coating material. The bonding nature in Mo3P has been explored. The electronic band structure shows that Mo3P has no band gap and exhibits conventional metallic behavior. All of the energy dependent optical characteristics demonstrate apparent metallic behavior and agree exactly with the electronic density of states calculations. The compound has excellent reflective and absorptive properties suitable for optical applications. Pressure dependent variations of the physical properties are explored and their possible link with superconductivity has been discussed.

The effects of hole content (p) and oxygen deficiency (delta) on the zero-field critical current density, Jc0, were investigated for high-quality c-axis oriented Y1-xCaxBa2Cu3O7-delta (x = 0, 0.05, 0.10, and 0.20) thin films. Low temperature critical current density of these films above the optimum doping were found to be high and were primarily determined by the hole concentration, reaching a maximum at p ~ 0.185 +/- 0.005, irrespective of the level of oxygen deficiency. This implies that oxygen disorder plays only a secondary role and the intrinsic Jc0 is primarily governed by the carrier concentration in the copper oxide planes. Further support in favor of this was found from the analysis of the in-plane resistive transitions of c-axis oriented crystalline thin films of YBa2Cu3O7-delta (YBCO) under magnetic fields (H) applied along the c-direction, over a wide range of doped holes. The characteristic magnetic field (H0), linked to the vortex activation energy and the irreversibility field, exhibits similar p-dependence as shown by Jc0(p). We have explained these observations in terms of the doping dependent pseudogap (PG) in the low-energy electronic energy density of states. Both the intrinsic critical current density and the irreversibility field depend directly on the superconducting condensation energy, which in turn is largely controlled by the magnitude of the hole concentration dependent PG in the quasiparticle spectral density., Comment: Submitted to Superconductivity

We present a detailed density functional theory based calculations of the structural, elastic, lattice dynamical, thermophysical, and optoelectronic properties of ternary semiconductors CaZn$_2$X$_2$ (X = N, P, As) in this paper. The obtained lattice parameters are in excellent agreement with the experimental values and other theoretical findings. These elastic constants satisfy the mechanical stability criteria. Moreover, many thermophysical parameters of these compounds are estimated, including the Debye temperature, average sound velocity, melting temperature, heat capacity, lattice thermal conductivity, etc. The comprehensive analysis of the elastic constants and moduli show that CaZn$_2$X$_2$ compounds possess reasonably good machinability, relatively high Vickers hardness and relatively low Debye temperature. The phonon dispersion curves and phonon density of states are investigated for the first time for the compounds CaZn$_2$P$_2$ and CaZn$_2$As$_2$. It is observed from the phonon dispersion curves that the bulk CaZn$_2$X$_2$ (X = N, P, As) compounds are dynamically stable. Electronic properties have been studied through the band structures and electronic energy density of states. The electronic band structures show that CaZn$_2$N$_2$ and CaZn$_2$As$_2$ possess direct band gaps while the compound CaZn$_2$P$_2$ show indirect band gap. The bonding characters of CaZn$_2$X$_2$ (X = N, P, As) compounds are investigated. Energy dependent optical parameters exhibit good correspondence with the electronic energy density of states features. We have thoroughly discussed the reflectivity, absorption coefficient, refractive index, dielectric function, optical conductivity and loss function of these semiconductors. The optical absorption, reflectivity spectra and the refractive index of CaZn$_2$X$_2$ (X = N, P, As) show that the compounds hold promise to be used in optoelectronic devices.

Density functional theory based study of the pressure dependent physical properties of binary SnS compound has been carried out. The computed elastic constants reveal that SnS is mechanically stable and brittle under ambient conditions. With increasing pressure, the compound becomes ductile. The Poisson's ratio also indicates brittle-ductile transition with increasing pressure. The hardness of SnS increases significantly with pressure. The compound possesses elastic anisotropy. The ground state electronic band structure is semiconducting with a small band gap which becomes metallic under pressure. The band becomes more and more dispersive with the increase in pressure while the electronic correlations decrease as pressure is raised. Both the Debye temperature and the phonon thermal conductivity of SnS increase sharply with pressure. The Melting temperature of the compound is low. Mixed bonding characteristics are found with ionic and covalent contributions. SnS is a good absorber of ultraviolet light. The reflectivity of the material increases with the increase in pressure. The reflectivity is nonselective over a wide spectral range. The low energy refractive index is high. All these optical characteristics are useful for prospective optoelectronic device applications. The optical anisotropy is low.

Binary metallic carbides belong to a technologically prominent class of materials. We have explored the structural, mechanical, electronic, optical, and some thermophysical properties of XC (X = Nb, Ta, Ti) binary metallic carbides in details employing first-principles method. Some of the results obtained are novel. A comparative analysis has been made.

Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03)., Comment: for the Snowmass Instrumentation Frontier Solid State Detector and Tracking community

Vertically integrated (3D) combinations of sensors and electronics provide the ability to fabricate small, fine pitch pixels with very small total capacitance monolithically integrated with complex circuitry. The small capacitance, enabled by the fine pixel pitch and low interconnect capacitance available in 3D hybrid bonding, provides excellent signal/noise with moderate power. This combination enables fabrication of integrated sensors and electronics with both excellent position and time resolution. In this white paper a discussion will be presented on 3D integration advantages, ongoing projects and prospects in high energy physics and beyond., Comment: contribution to Snowmass 2021

Very recently carbon-rich NaC6 with sodalite-like structure has been predicted to show superconducting transition temperature above 100 K at relatively low applied (compared to high-Tc hydrides) hydrostatic pressures. We have investigated the pressure dependent structural, elastic, electronic, superconducting state, and optoelectronic properties of NaC6 in this study. Some important thermophysical properties have also been explored. The elastic properties along with Poisson's and Pugh's ratios and optoelectronic parameters are investigated for the first time. NaC6 was found to be structurally stable only at high pressures at and above 40 GPa, in agreement with previous study. The compound is highly ductile and the chemical bonding is predominantly metallic in nature. The Debye temperature shows strong pressure dependence. The Gruneisen parameter also exhibits significant pressure dependence. The electronic band structure reveals metallic character and consists of highly dispersive and almost flat bands crossing the Fermi level. Both the electronic density of states at the Fermi level and repulsive Coulomb pseudopotential increase gradually with increasing pressure in the range 40 GPa to 70 Gpa. The degree of dispersion in the E(k) curves depend weakly on pressure both in the valence and conduction bands. The optical parameters spectra, studied for the first time, correspond well with the electronic band structure. NaC6 absorbs and reflects electromagnetic radiation quite efficiently in the mid-ultraviolet region. Superconducting transition temperatures of NaC6 have been estimated at different pressures and compared with previously reported values. The effects of various parameters on Tc have been discussed in details., Comment: Submitted for publication

SnTaS2 is a recently discovered layered semimetal exhibiting type-II low transition temperature superconductivity. Except some superconductivity related parameters, most of the physical properties, namely, elastic, mechanical, bonding, phonon dispersion, acoustic, thermophysical, and optical properties of SnTaS2 are unexplored till now. In this study, we have investigated these hitherto unexplored properties of SnTaS2 for the first time employing density functional theory (DFT) based first-principles method. SnTaS2 is a mechanically stable, elastically anisotropic compound with strongly layered feature. The bond hardness and Vickers hardness have been calculated. The material under study is ductile, soft and highly machinable. The chemical bonding feature has mixed character with significant contribution coming from the ionic channel. Phonon dispersion curves disclose dynamical stability. Electronic band structure calculations show simple metallic character. The Fermi surface consists of both electron-like and hole-like sheets with varying degrees of dispersion. The low energy (including visible part of the spectrum) refractive index of SnTaS2 is high. The reflectivity is fairly nonselective over a wide range of photon energy and the absorption coefficient is large in the mid ultraviolet region. The Debye temperature and thermal conductivity of SnTaS2 are low. The electron-phonon coupling constant has been calculated. The compound under study possesses optical anisotropy with respect to the polarization direction of the incident electric field.

This study focuses on the temperature and hole content dependent fluctuation diamagnetism of hole doped YBa2Cu3O7-delta (Y123) high-Tc superconductors. Two different compositions of Y123 have been considered with in-plane hole content (p): 0.161 (optimally doped) and 0.143 (underdoped). The fluctuation induced excess diamagnetic susceptibility, Delta_chi(T), has been investigated via the mean-field Gaussian-Ginzburg-Landau (MFGGL) formalism with and without a total energy cut-off in the fluctuating modes. It has been found that inclusion of total energy cut-off describes the Delta_chi(T) data significantly better. Furthermore, the pseudogap (PG) itself induces an anomalous decrease in the normal state magnetic susceptibility. By means of the analysis of Delta_chi(T)/T at different hole concentrations, we have explored the possible role of the PG on diamagnetic fluctuations. It has been found that MFGGL formalism is not able to reproduce the Delta_chi(T)/T features for the underdoped compound over a broad range of reduced temperature, Epsilon [= ln(T/Tc)]. The discrepancy becomes prominent in the temperature range where PG dominates the normal state magnetic susceptibility data. The agreement between the theoretical prediction and experimental Delta_chi(T) is better for the optimally doped compound with p = 0.161, where the effect of the PG is small. This notable difference implies that PG induced reduction in the magnetic susceptibility is not related directly to the superconducting fluctuations which in turn indicate that electronic correlations giving rise to the PG and Cooper pairing are independent to each other., Comment: Submitted for publication

Transition metal dichalcogenides (TMDCs) belong to technologically important compounds. We have explored the structural, elastic, bonding, optoelectronic and some thermo-physical properties of ZrX2 (X = S, Se, Te) TMDCs in details via ab-initio technique in this study. Elastic anisotropy indices, atomic bonding character, optoelectronic properties and thermo-physical parameters including melting temperature and minimum phonon thermal conductivity are investigated for the first time. All the TMDCs under investigation possess significant elastic anisotropy and layered structural features. ZrX2 (X = S, Se, Te) compounds are fairly machinable, and ZrS2 and ZrSe2 are moderately hard. ZrTe2, on the other hand, is significantly softer. Both covalent and ionic bondings contribute in the crystals. Electronic band structure calculations display semiconducting behavior for ZrS2 and ZrSe2 and metallic behavior for ZrTe2. Energy dependent optoelectronic parameters exhibit good correspondence with the underlying electronic energy density of states features. ZrX2 (X = S, Se, Te) compounds absorb ultraviolet radiation effectively. The reflectivity spectrum, R(w), remains over 50% in the energy range from 0 eV to 20 eV for ZrTe2. Therefore, this TMDC has wide band and nonselective high reflectivity and can be used as an efficient reflector to reduce solar heating. Debye temperature, melting point and minimum phonon thermal conductivity of the compounds under study are low and show excellent correspondence with each other and also with the elastic and bonding characteristics.

Low Gain Avalanche Diodes (LGADs) are thin (20-50 $\mu m$)silicon di ode sensors with modest internal gain (typically 5 to 50) and exceptional time resolution (17 $ps$ to 50 $ps$). However, the granularity of such devices is limited to the millimeter scale due to the need to include protection structures at the boundaries of the readout pads to avoid premature breakdown due to large local electric fields. In this paper we present a new approach -- the Deep-Junction LGAD (DJ-LGAD) -- that decouples the high-field gain region from the readout plane. This approach is expected to improve the achievable LGAD granularity to the tens-of-micron scale while maintaining direct charge collection on the segmented electrodes., Comment: 16 pages, 12 figures

The Large Hadron electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High Luminosity--Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron-proton and proton-proton operation. This report represents an update of the Conceptual Design Report (CDR) of the LHeC, published in 2012. It comprises new results on parton structure of the proton and heavier nuclei, QCD dynamics, electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics in extending the accessible kinematic range in lepton-nucleus scattering by several orders of magnitude. Due to enhanced luminosity, large energy and the cleanliness of the hadronic final states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, the report represents a detailed updated design of the energy recovery electron linac (ERL) including new lattice, magnet, superconducting radio frequency technology and further components. Challenges of energy recovery are described and the lower energy, high current, 3-turn ERL facility, PERLE at Orsay, is presented which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution and calibration goals which arise from the Higgs and parton density function physics programmes. The paper also presents novel results on the Future Circular Collider in electron-hadron mode, FCC-eh, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies., Comment: 373 pages, many figures, to be published by J. Phys. G

Laser-cooled and trapped atomic ions form an ideal standard for the simulation of interacting quantum spin models. Effective spins are represented by appropriate internal energy levels within each ion, and the spins can be measured with near-perfect efficiency using state-dependent fluorescence techniques. By applying optical fields that exert optical dipole forces on the ions, their Coulomb interaction can be modulated to produce long-range and tunable spin-spin interactions that can be reconfigured by shaping the spectrum and pattern of the laser fields, in a prototypical example of a quantum simulator. Here we review the theoretical mapping of atomic ions to interacting spin systems, the preparation of complex equilibrium states, the study of dynamical processes in these many-body interacting quantum systems, and the use of this platform for optimization and other tasks. The use of such quantum simulators for studying spin models may inform our understanding of exotic quantum materials and shed light on the behavior of interacting quantum systems that cannot be modeled with conventional computers.

The superconducting critical current density, Jc, in hole doped cuprates show strong dependence on the doped hole content, p, within the copper oxide plane(s). The doping dependent Jc mainly exhibits the variation of the intrinsic depairing critical current density as p is varied. Jc(p) tends to peak at p ~ 0.185 in copper oxide superconductors. This particular value of the hole content, often termed as the critical hole concentration, has several features putative to a quantum critical point (QCP). Very recently, pressure dependences of the superconducting transition temperature (Tc) and the critical current (Ic) in pure CeRhIn5 and Sn doped CeRhIn5 heavy fermion compounds have been reported (Nature Communications (2018) 9:44, DOI: 10.1038/s41467-018-02899-5). The critical pressure demarcates an antiferromagnetic quantum critical point where both Tc and Ic are maximized. We have compared and contrasted this behavior with those found for Y1-xCaxBa2Cu3O7-d in this brief communication. The resemblance of the systematic behavior of the critical current with pressure and hole content between heavy fermion systems and hole doped cuprates is significant. This adds to the circumstantial evidence that quantum critical physics probably plays a notable role beyond the unconventional normal and superconducting state properties of copper oxide superconductors., Comment: 14 pages, 8 figures, 1 table, submitted for publication