Search

Copyright of African Journal of Clinical & Experimental Microbiology is the property of African Journals Online (AJOL) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A very compact microstrip reconfigurable filter for fourth-generation (4G) and sub-6 GHz fifth-generation (5G) systems using a new hybrid co-simulation method is presented in this manuscript. The basic microstrip design uses three coupled line resonators with λ/4 open-circuited stubs. The coupling coefficients between the adjacent and non-adjacent resonators are used to tune the filter at the required center frequency to cover the frequency range from 2.5 to 3.8 GHz. The coupling coefficient factors between the adjacent resonators are adjusted to control and achieve the required bandwidth, while the input and output external quality factors are adjusted to ensure maximum power transfer between the input and output ports. Two varactor diodes and biasing circuit components are selected and designed to meet the targeted performance for the tunable filter. The impedance bandwidth is maintained between 95 and 115 MHz with measured return losses of more than 17 dB and measured insertion loss of less than 1 dB. Computer simulation technology (CST) is utilized to design and optimize the presented reconfigurable filter, with hybrid co-simulation technique, using both CST microwave studio (MWS) and CST design studio (DS), is applied to build the model by considering the SPICE representation for the varactor switches and all electronic elements of the biasing circuit. The introduced reconfigurable microstrip filter is also fabricated using a Rogers RO3010 material with a relative dielectric constant of 10.1 and it is printed on a very compact size of 13 × 8 × 0.81 mm3. An excellent agreement is obtained between the simulation and measurement performance.

This paper presents a new compact microstrip filtering antenna with modified shaped slots to improve the impedance bandwidth. The proposed microstrip filtering antenna consists of three parts: the monopole radiating patch antenna; the Stepped Impedance Resonator (SIR) filter; and the feeding microstrip line. The designed structure is achieved on one-sided glass epoxy FR-4 substrate with dielectric constant εr = 4.4 and thickness h = 1.6 mm. The design procedure of the proposed filtering antenna starts from the second-order Chebyshev low pass filter (LPF) prototype. The achieved results show an excellent performance of S11-parameter with broadside antenna gain on +z-direction. Having two transmission zeros at 5.4 GHz and 7.7 GHz, good skirt selectivity and a wide-band impedance bandwidth of about 1.66 GHz makes the designed filtering antenna suitable for high-speed data communications. Both the simulation results generated by using the Computer Simulation Technology (CST) software package and the measurement achieved by using a vector network analyzer (HP 8510C) and the anechoic chamber show good agreement.

Summary: This paper proposes a miniature two‐element Multiple Input Multiple Output (MIMO) antenna dedicated to UWB applications. The proposed MIMO design has a very low profile of 30 × 20 × 1.6 mm3. The proposed antenna is carefully designed and optimized using HFSS simulation software. As a proof of concept, the proposed design is realized and experimentally tested for MIMO applications. The proposed structure, printed on an FR4 substrate, comprises two symmetrical elliptical conductive patches on the upper side and a modified ground plane on the lower one. Each radiating element includes six elliptical rings. The modified ground plane consists of a T‐shaped strip and two semielliptical slots etched opposite the feed line. All the parameters of the design are carefully optimized to achieve an ultrawide bandwidth antenna spanning from (136.08%) 3.1 to 16.3 GHz. The results are discussed and analyzed in terms of bandwidth, gain, efficiency, radiation pattern, diversity gain, envelope correlation coefficient (ECC), total active reflection coefficient (TARC), and mean effective gain (MEG). All simulated results are found to be in good accordance with experiments. The design reveals attractive features for UWB applications. A good isolation (17 dB) between the two radiators is achieved despite the close proximity using the suggested ground plane geometry. [ABSTRACT FROM AUTHOR]