Search

Hybrid biomaterials allow for the improvement of the biological properties of materials and have been successfully used for implantology in medical applications. The covalent and selective functionalization of materials with bioactive peptides provides favorable results in tissue engineering by supporting cell attachment to the biomaterial through biochemical cues and interaction with membrane receptors. Since the functionalization with bioactive peptides may alter the chemical and physical properties of the biomaterials, in this study we characterized the biological responses of differently functionalized chitosan analogs. Chitosan analogs were produced through the reaction of GRGDSPK (RGD) or FRHRNRKGY (HVP) sequences, both carrying an aldehyde-terminal group, to chitosan. The bio-functionalized polysaccharides, pure or “diluted” with chitosan, were chemically characterized in depth and evaluated for their antimicrobial activities and biocompatibility toward human primary osteoblast cells. The results obtained indicate that the bio-functionalization of chi-tosan increases human-osteoblast adhesion (p <0.005) and proliferation (p < 0.005) as compared with chitosan. Overall, the 1:1 mixture of HVP functionalized-chitosan:chitosan is the best compromise between preserving the antibacterial properties of the material and supporting osteoblast differentiation and calcium deposition (p < 0.005 vs. RGD). In conclusion, our results reported that a selected concentration of HVP supported the biomimetic potential of functionalized chitosan better than RGD and preserved the antibacterial properties of chitosan.

Hydroxyapatite (HAP) coatings can improve the biocompatibility and bioactivity of titanium alloys, such as Ti6Al4V, commonly used as material for orthopedic prostheses. In this framework, we have studied the surface of HAP coatings enriched with Mg and either Si or Ti deposited by RF magnetron sputtering on Ti6Al4V. HAP coatings have been furtherly functionalized by adsorption of a self-assembling peptide (SAP) on the HAP surface, with the aim of increasing the material bioactivity. The selected SAP (peptide sequence AbuEAbuEAbuKAbuKAbuEAbuEAbuKAbuK) is a self-complementary oligopeptide able to generate extended ordered structures by self-assembling in watery solutions. Samples were prepared by incubation of the HAP coatings in SAP solutions and subsequently analyzed by X-Ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR) and Near Edge X-Ray Absorption Fine Structure (NEXAFS) spectroscopies, in order to determine the amount of adsorbed peptide, the peptide stability and the structure of the peptide overlayer on the HAP coatings as a function of the HAP substrate and of the pH of the mother SAP solution. Experimental data yielded evidence of SAP adsorption on the HAP surface, and peptide overlayers showed ordered structure and molecular orientation. The thickness of the SAP overlayer depends on the composition of the HAP coating.

Amino and sulfonate ending groups thiols are used as functionalizing agents to stabilize of gold nanoparticles (AuNPs), obtaining hydrophilic AuNPs with a 10–20 nm diameter range and tunable surface charge. The nanomaterial is extensively characterized from a physicochemical point of view by UV–Vis and Fourier-transform infrared spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, synchrotron radiation X-ray photoelectron spectroscopy (XPS), and dynamic light scattering to investigate the bonding between the two thiols and the metal surface. Systems are also biologically characterized on human multiforme glioblastoma T98G cells to understand their behavior in cell culture for biomedical applications. NMR and XPS studies evidence the presence of amino ending thiols with different chain lengths, 6-amino-1-hexanethiol hydrochloride (6EA) or cysteamine (CY) and sodium 3-mercapto-1-propanesulfonate (3MPS) on the metal surface: the relative molar ratio between the thiols bound to the AuNPs (3MPS/6EA or 3MPS/CY) is measured. On selected samples, the anti-PD-L1 antibody is loaded using AuNPs/antibody combination in a 2:1 weight ratio. Comparing different AuNPs concentrations (10 and 50 µg mL−1), the effect on colony-forming capacity after 24 h exposure is evaluated. The synthesized AuNPs are nontoxic, and they do not affect cell proliferation. These small particles can be used for targeting, opening tangible and interesting perspectives for further biomedical studies.

Molecular self-assembly consists of the spontaneous aggregation of molecules into a well-defined structure guided by noncovalent bonds. The self-assembly strategy is ubiquitous in nature and recently has been proposed as a nature-mimetic strategy in polymer science and biomaterial engineering. In this context, we aim at designing and testing innovative but simple chemical strategies to efficiently modify surfaces by exploiting minor modifications in the bioactive molecule functionalities, for example, introducing cysteine (Cys) as a terminal residue in self-assembling peptides (SAPs). In this work, we report the attenuated total reflection-Fourier transform infrared spectroscopy, synchrotron radiation-induced X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and time-of-flight secondary ion mass spectrometry investigation of self-assembled layers of oligopeptides anchored onto gold surfaces through cysteine residues, opportunely inserted in an SAP (EAK16-II) main chain in three different positions: At the amine end group, at the carboxyl end group, and at both terminal groups (i.e., a bidentate SAP). This study, which allowed us to individuate in the bidentate SAP the best candidate for the controlled production of ordered SAP layers on the gold substrate surface, is envisaged to open wide perspectives for efficient chemical modification of surfaces with biomolecules, leading to obtaining innovative bioactive materials for applications in the field of tissue engineering.

In the field of tissue engineering, recombinant protein-based biomaterials made up of block polypeptides with tunable properties arising from the functionalities of the individual domains are appealing candidates for the construction of medical devices. In this work, we focused our attention on the preparation and structural characterization of nanofibers from a chimeric-polypeptide-containing resilin and elastin domain, designed on purpose to enhance its cell-binding ability by introducing a specific fibronectin-derived Arg-Gly-Asp (RGD) sequence. The polypeptide ability to self-assemble was investigated. The molecular and supramolecular structure was characterized by Scanning Electronic Microscopy (SEM) and Atomic Force Microscopy (AFM), circular dichroism, state-of-the-art synchrotron radiation-induced techniques X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). The attained complementary results allow us to assess as H-bonds influence the morphology of the aggregates obtained after the self-assembling of the chimeric polypeptide. Finally, a preliminary investigation of the potential cytotoxicity of the polypeptide was performed by culturing human fetal foreskin fibroblast (HFFF2) for its use as biomedical device.

In the field of tissue engineering, a promising approach to obtain a bioactive, biomimetic, and antibiotic implant is the functionalization of a "classical" biocompatible material, for example, titanium, with appropriate biomolecules. For this purpose, we propose preparing self-assembling films of multiple components, allowing the mixing of different biofunctionalities "on demand". Self-assembling peptides (SAPs) are synthetic materials characterized by the ability to self-organize in nanostructures both in aqueous solution and as thin or thick films. Moreover, ordered layers of SAPs adhere on titanium surface as a scaffold coating to mimic the extracellular matrix. Chitosan is a versatile hydrophilic polysaccharide derived from chitin, with a broad antimicrobial spectrum to which Gram-negative and Gram-positive bacteria and fungi are highly susceptible, and is already known in the literature for the ability of its derivatives to firmly graft titanium alloys and show protective effects against some bacterial species, either alone or in combination with other antimicrobial substances such as antibiotics or antimicrobial peptides. In this context, we functionalized titanium surfaces with chitosan grafted to EAK16-II (a SAP), obtaining layer-by-layer structures of different degrees of order, depending on the preparative stoichiometry and path. The chemical composition, molecular structure, and arrangement of the obtained biofunctionalized surfaces were investigated by surface-sensitive techniques such as reflection-absorption infrared spectroscopy (RAIRS) and state-of-the-art synchrotron radiation-induced spectroscopies as X-ray photoemission spectroscopy (SR-XPS), and near-edge X-ray absorption fine structure (NEXAFS). Furthermore, was demonstrated that surfaces coated with EAK and Chit-EAK can support hNPs cell attachment and growth.

Achieving rigorous control over the procedures aiming at modifying surfaces by selective and covalent anchoring of bioactive molecules is a mandatory step in view of the realistic applicability of bioengineered materials in the field of tissue engineering, biosensing, and nanomedicine. In this context, we report here a proof-of-concept study carried out on a self-assembling peptide (SAP) functionalized with cysteine (Cys), as to ideally grant molecule grafting to gold surfaces. The effectiveness of the surface functionalization in a monolayer regime and the molecular stability of SAP-Cys were probed by X-ray photoelectron spectroscopy; the highly ordered self-organization attained by the grafting molecules was assessed by means of angular-dependent near edge X-ray absorption spectroscopy studies. This study opens wide perspectives for efficient chemical modification of surfaces with biomolecules to include bioactive motifs and/or to add nanometric fibrous patterns.

Self-assembling peptides (SAPs) were investigated by means of XPS and Angular Dependent NEXAFS spectroscopies, with the aim to probe the influence of pH and Ionic Strength conditions on the chemical structure and molecular organization of SAPs anchored on titania surfaces. XPS at the C1s, N1s, O1s core levels allowed to study surfaces and biomolecule/substrate interfaces. NEXAFS data allowed ascertaining that SAPs molecular structure is preserved upon grafting to the titania surface. Angular Dependent NEXAFS was used to investigate the influence of environmental conditions on the molecular organization behaviour. The objective of our study was to establish a set of methodologies for obtaining arrangements of well-organized biomolecules on scaffolds surfaces as a basic technology to develop and optimize cells adhesion and proliferation for tissue engineering applications.

In the biomedical field, a main challenge is to find a material that can provide all the requirements imposed by biomedical applications, including consisting of biocompatible elements; a low elastic modulus to avoid the stress shield effect in bone fixation; a high wear-corrosion resistance; proper biocompatibility; etc. Presently, metallic materials are the most used in biomedical applications, especially for the dental and orthopedic fields. The most common is the Ti-6Al-4V alloy. However, due to the fact that Al and V can cause mutagenic, cytotoxic, and allergic reactions, the current research has been focused on replacing the Ti-6Al-4V alloy with one consisting only of biocompatible elements. Various systems have been proposed, and in recent years, a novel Ti-Nb-Zr system with different compositions has been developed, as Zr and Nb are known to be more biocompatible than Al and V. Nevertheless, these systems still have low osseointegration and bioactivity, which limits their use for biomedical applications. Based on this, the functionalization of their surfaces by various bioactive coatings was proposed. Also the peptide coatings were proposed for improving their osseoconductivity along with good bioactivity and antibacterial properties. The present chapter reports the general classification and fabrication methods of titanium alloys and their use in medicine as well as experimental details regarding the Ti-Nb-Zr system used for biomedical applications, such as elastic modulus, corrosion resistance, and in vitro biological properties. Attention is then devoted to methods for improving the osseoconductivity and bioactivity of the Ti-Nb-Zr system used for biomedical applications.

Regenerative medicine is taking great advantage from the use of biomaterials in the treatments of a wide range of diseases and injuries. Among other biomaterials, self-assembling peptides are appealing systems due to their ability to spontaneously form nanostructured hydrogels that can be directly injected into lesions. Indeed, self-assembling peptide scaffolds are expected to behave as biomimetic matrices able to surround cells, to promote specific interactions, and to control and modify cell behavior by mimicking the native environment as well. We selected three pentadecapeptides inspired by Human Tropoelastin, a natural protein of the extracellular matrix, expected to show high biocompatibility. Moreover, the here proposed self-assembling peptides (SAPs) are able to spontaneously aggregate in nanofibers in biological environment, as revealed by AFM (Atomic Force Microscopy). Peptides were characterized by XPS (X-ray Photoelectron Spectroscopy) and IRRAS (Infrared Reflection Absorption Spectroscopy) both as lyophilized (not aggregated) and as aggregated (nanofibers) samples in order to investigate some potential differences in their chemical composition and intermolecular interactions, and to analyze the surface and interface of nanofibers. Finally, an accurate investigation of the biological properties of the SAPs and of their interaction with cells was performed by culturing for the first time human Mesenchymal Stem Cells (hMSCs) in presence of SAPs. The final aim of this work was to assess if Human Tropoelastin-inspired nanostructured fibers could exert a cytotoxic effect and to evaluate their biocompatibility, cellular adhesion and proliferation.

The emerging trends in regenerative medicine rely among others on biomaterial-based therapies, with the use of biomaterials as a central delivery system for biochemical and physical cues to manipulate transplanted or ingrowth cells and to orchestrate tissue regeneration. Cell adhesion properties of a biomaterial strongly depend on its surface characteristics. Among others poly(ε-caprolactone) (PCL) is a biocompatible and biodegradable material with low cytotoxicity that is widely adopted as synthetic polymer in several applications. However, it is hydrophobic, which limits its use in tissue engineering. In order to improve its hydrophilicity and cellular compatibility, PCL surface was grafted with maltose through a two-step procedure in which controlled aminolysis of PCL ester bonds by hexanediamine was followed by reductive amination with the carbohydrate reducing end. The modified PCL surface was then characterized in detail by x-ray Photoelectron Spectroscopy (XPS) and Near Edge x-ray Absorption Fine Structure (NEXAFS) spectroscopies. In addition, the biocompatibility of the proposed biomaterial was investigated in preliminary biological assays