Search

Backgrounds: Antibiotics are used in endodontic treatment to control acute odontogenic infection and for prophylactic purposes. This study aimed to investigate the knowledge of dentists from the Federation of Bosnia and Herzegovina about the choice and the routes of antibiotic administration in endodontics. Methods: This cross-sectional study involved dentists in Federation of Bosnia and Herzegovina health institutions. The Dental Chamber sent a twelve-question survey to members’ email addresses. They were asked about the type, dosage, indications, and side effects of antibiotics used in endodontics. The obtained data were screened and analyzed. Results: A total of 180 questionnaires were filled out. The most commonly prescribed antibiotic was amoxicillin with clavulanic acid. Pulp necrosis with symptomatic apical periodontitis, swelling, and moderately severe symptoms were the main indications for the therapeutic use of antibiotics. Amoxicillin, administered orally at 2 g 1 h before endodontic surgery for patients with bacterial endocarditis, was mostly indicated for the prophylactic use of antibiotics. Conclusions: Based on the results of this study, we can conclude that dentists from the Federation of Bosnia and Herzegovina have limited knowledge regarding antibiotic use in endodontics. Educational activities and campaigns are necessary to raise awareness about antibiotics in dental medicine in the Federation of Bosnia and Herzegovina.

The aim of this study was to compare the mechanical properties and ion release from a commercially available resin-modified glass ionomer cement to a formulation reinforced by the addition of short glass fibres at various percentages. Methods: Three experimental groups were prepared by adding a mass ratio of 10%, 15% and 20% of short glass fibres to the powder portion of the cement from a capsule (GC Fuji II LC), while the control group contained no fibres. Microhardness (n = 12), fracture toughness, and flexural, compressive and diametral tensile strength (n = 8) were evaluated. To study ion release, readings were obtained utilising fluoro-selective and calcium-selective electrodes after 24 h, 7 days and 30 days (n = 12). The spatial distribution of fibres within the material was evaluated through scanning electron microscopy. The data were analysed using one-way ANOVA with a Bonferroni adjustment. Results: The findings suggest that elevating fibre weight ratios to 20 wt% results in improved mechanical properties (p < 0.05) in microhardness, flexural strength, diametral tensile strength and fracture toughness. In terms of ion release, a statistically significant difference (p < 0.001) was observed between the groups at the conclusion of 24 h and 7 days, when the fluoride release was much higher in the control group. However, after 30 days, no significant distinction among the groups was identified (p > 0.05). Regarding calcium release, no statistically significant differences were observed among the groups at any of the evaluated time points (p > 0.05). SEM showed the fibres were homogeneously incorporated into the cement in all experimental groups. Conclusions: Resin-modified glass ionomer enhanced with short glass fibres at a weight loading of 20% showcased the most favourable mechanical properties while concurrently maintaining the ability to release fluoride and calcium after a 30-day period.

AimTo establish the inter-rater reliability of the Composite Quality Score (CQS-2) and to test the null hypothesis that it did not differ significantly from that of the first CQS version (CQS-1).Materials and methodsFour independent raters were selected to rate 45 clinical trial reports using CQS-1 and CQS-2. The raters remained unaware of each other’s participation in this study until all rating had been completed. Each rater received only one rating template at a time in a random sequence for CQS-1 and CQS-2 rating. Raters completed each template and sent these back to the principal investigator. Each rater received their next template 2 weeks after submission of the completed previous template. The inter-rater reliabilities for the overall appraisal score of the CQS-1 and the CQS-2 were established by using the Brennan-Prediger coefficient (BPC). The coefficients of both CQS versions were compared by using the two-sample z-test. During secondary analysis, the BPCs for every criterion and each corroboration level for both CQS versions were established.ResultsThe BPC for the CQS-1 was 0.85 (95% CI: 0.64–1.00) and for the CQS-2 it was 1.00 (95% CI: 0.94–1.00), suggesting a very high inter-rater reliability for both. The difference between the two CQS versions was statistically not significant (p = 0.17). The null hypothesis was accepted.ConclusionThe CQS-2 is still under development, This study shows that it is associated with a very high inter-rater reliability, which did not statistically significantly differ from that of the CQS-1. The promising results of this study warrant further investigation in the applicability of the CQS-2 as an appraisal tool for prospective controlled clinical therapy trials.

Objective: To compare short-term release of fluoride ions from ion-releasing dental restorative materials. Material and methods: Seven experimental groups were prepared using the following six different materials: alkasite (Cention Forte), resin-modified glass ionomer cement (Fuji II LC), bioactive composite (ACTIVA BioACTIVE-RESTORATIVE), fluoride-containing nano-hybrid composite (Luminos UN), coat-free glass hybrid (EQUIA Forte HT), coat-applied glass hybrid (EQUIA Forte HT), and glass ionomer cement (Fuji IX). A total of 40 samples for each group (n=40) were prepared in Teflon molds (8 mm x 2 mm) and placed in polyethylene vials with 5 ml of deionized water. Fluoride release was measured after 6, 24, 48 hours, and after 5 weeks using an ion-selective electrode. The results were expressed in mg/l and the data were statistically analyzed using ANOVA. Results: Significant differences in fluoride release were observed within the first 6 hours (ANOVA p

Objectives: To examine the effects of different whitening agents on the color and translucency of different resin composites, in vitro. Material and methods: A total of 315 specimens (10.0×2.0 mm) were fabricated from two microhybrid (G-aenial anterior [G-Ant] ) and (G-aenial posterior [G-Post]) and a nano hybrid (G-aenial A’CHORD [ G-ACH]) resin composites and each group was randomly distributed into seven experimental groups (n=15) as follows; 1- control (C); 2- in-office whitening agent (IOW); 3- at-home whitening agent (AHW); 4- prefilled tray (PT); 5- whitening pen (WP); 6- whitening toothpaste (WT) and 7- whitening mouthwash (WMW). The specimens were subjected to staining except control group before application of the different whitening procedures. The color of specimens was measured after 24 h (T 0 ), after staining (T 1 ) and after whitening (T 2 ). Color change [CIEDE2000 (ΔE 00 )], translucency parameter (TP) values and changes in whiteness index (WI D ) were calculated. Data were analyzed statistically (p0.05), whereas a significant difference was observed at T 2 (p

The aim of this study was to investigate the root canal morphology of lower second molars in the Croatian subpopulation of the Zagreb region using cone-beam computed tomography (CBCT). We analyzed 3212 CBCT scans from the two radiology centers in Zagreb. The number of roots and root canals, the occurrence of C-shaped canals and additional roots were recorded. “C”-shaped roots were classified according to Melton classification. Canals in the mesial root were classified according to Vertucci. Lower second molars were found on 608 CBCT scans from a total number of 859. Among them, 78 (9.1%) had a “C”-shaped form. In the mesial roots, the frequencies of Vertucci types were: Type I in ninety-four cases (12.0%), Type II in three hundred and twenty cases (41.0%), Type III in six cases (0.8%), Type IV in three hundred and fifty-two cases (45.1%), Type V in three cases (0.4%), Type VI was found in four cases (0.5%) and Type VIII was found in one case (0.1%). Radix entomolaris and paramolaris were found in 29 (3.4%) lower second molars. The lower second molars in the Zagreb population show significant diversity in internal anatomy with a relatively high prevalence of “C”-shaped root canals and merged root canals in the mesial root.

The aim of this study was to compare the potential of standard ion-releasing materials to repair demineralized lesions with recently introduced alkasite and glass hybrid materials. Glass ionomer (GC Fuji TRIAGE), two glass hybrids (EQUIA Forte HT, Riva SC), calcium silicate cement (Biodentine) and an alkasite (Cention Forte) were tested. A total of 72 human third molars were used for sample preparation; on the dentine surface, a class-I cavity was prepared, and one half was covered with nail varnish. The teeth were subjected to a demineralization protocol, filled with the examined materials, and cut in half. The evaluation included a dentine microhardness assessment (n = 10) and SEM/EDS analysis (n = 2). The results were analyzed using SPSS 22.0 statistical software and compared using an analysis of variance and Scheffe post-hoc test. The statistical significance level was set to 0.05. Mean microhardness values (HV0.1) after 14 and 28 days were, respectively: EQUIA Forte HT (26.7 ± 1.45 and 37.74 ± 1.56), Riva Self Cure (19.66 ± 1.02 and 29.58 ± 1.18), Cention Forte (19.01 ± 1.24 and 27.93 ± 1.33), Biodentine (23.35 ± 1.23 and 29.92 ± 1.02), GC Fuji TRIAGE (25.94 ± 1.35 and 33.87 ± 5.57) and control group (15.57 ± 0.68 and 15.64 ± 0.82). The results were significantly different between most groups (p < 0.001). SEM/EDS revealed varying patterns, material deposits and distinct elemental variations. To conclude, all materials increased microhardness and affected the dentine surface appearance and chemical composition; EQUIA Forte HT demonstrated the most pronounced effects.

This study sought to evaluate the efficacy of SWEEPS in the removal of epoxy-resin-based and calcium-silicate-containing endodontic sealer combined with single-cone and carrier-based obturation techniques through a micro-CT analysis. Seventy-six single-rooted extracted human teeth with single root canal were instrumented with Reciproc instruments. Specimens were randomly divided into four groups (n = 19) according to the root canal filling material and obturation technique: (1) AH Plus sealer + Reciproc gutta-percha, (2) TotalFill BC sealer + TotalFill BC Points, (3) AH Plus sealer + Guttafusion obturator, and (4) MTA Fillapex + Guttafusion obturator. All specimens were re-treated one week later using Reciproc instruments. Following re-treatment, root canals were additionally irrigated using the Auto SWEEPS modality. The differences in the root canal filling remnants were analyzed by micro-CT scanning of each tooth after root canal obturation, after re-treatment, and after additional SWEEPS treatment. Statistical analysis was performed using an analysis of variance (p < 0.05). The additional treatment with SWEEPS significantly reduced the volume of the root canal filling materials in all experimental groups compared to the removal of root canal filling using only reciprocating instruments (p < 0.05). However, the root canal filling was not removed completely from any of the samples. SWEEPS can be used to enhance the removal of both epoxy-resin-based and calcium-silicate-containing sealers, in combination with single-cone and carrier-based obturation techniques.

Over the past few decades, adhesive dentistry has advanced significantly. In light of minimal-invasive dentistry, this novel technique advocates a more conservative cavity design that relies on the efficiency of present enamel-dentine adhesives. The study aimed to address the scientific deficit in understanding the long-term bonding performance of universal adhesives and to provide a new clinical solution with desirable bond strength to dentin. The dentin bond strength of three bonding agents, G2-Bond Universal (GC), Clearfil SE Bond (Kuraray), and Scotchbond Universal Plus (3M ESPE), was evaluated following various storage and etching modes. The UltraTester (Ultradent) bond strength testing machine was used to assess shear bond strength. The results showed that thermal cycling and the choice of adhesive system significantly affected the shear bond strength (p = 0.018 and p = 0.001, respectively). Among the three adhesives, Scotchbond Universal Plus had the lowest bond strength value (mean value = 24.78 MPa), while G2-Bond Universal was found to have desirable shear bond strength to dentin compared to the other adhesives, even after one year in the oral environment (mean value = 35.15 MPa). These findings imply that the HEMA-free universal adhesive G2-Bond Universal is the most effective universal adhesive for clinical practices, particularly when applied in the self-etch mode.

The surface gloss, radiopacity and enamel/dentin shear bond strengths (SBS)s of five commercially available contemporary universal composite resins (CR)s were examined. The tested universal CRs were as follows: G-aenial A’CHORD (GA), Charisma Diamond (CD), Neo SpectraTMST(NS), Filtek(F) and Estelite Asteria(EA). Twelve cylindrical specimens per group were fabricated and gloss measurements were performed using a gloss meter after polishing and darkening. Five specimens of each group were radiographed using a CMOS sensor alongside an aluminum stepwedge, human enamel and dentin. The mean gray values were measured with a computer program. A total of 120 bonded human enamel and dentin specimens were subjected to SBS test. To analyze surface gloss, radiopacity and SBS we used Kruskall–Wallis, Wilcoxon signed rank, Welch tests and one-way ANOVA. Games–Howell, Tukey’s HSD tests, and Dunn’s multiple comparisons were used for multiple comparisons (p < 0.05). In terms of gloss units of the materials after polishing and darkening, the highest surface gloss was achieved with GA, followed by NS, F, CD and EA (p < 0.001). All the tested CRs showed significantly higher radiopacity values in comparison with dentin (p < 0.05). CD and NS presented higher radiopacity values, while other CRs were, in decreasing order; F, GA and EA (p < 0.001). The SBS ranking varied for enamel and dentin, and the adhesive failure was detected at a higher rate. Commercially available contemporary universal CRs display different surface gloss, radiopacity and SBS properties.

Objectives: To determine the accuracy of visual damage evaluation of rotating and reciprocal endodontic instruments with the naked eye and optical devices. Material and methods: Four examiners were involved, divided into two age groups: I. 20-30 years, n = 2, II. 40-50 years, n = 2. They visually assessed the existence of damage to rotating or reciprocal endodontic instruments by their naked eye and with two types of optical aids. A total of 239 instruments from different manufacturers were evaluated by each examiner. Before damage estimation, each examiner calibrated the eye on a new instrument. Sensitivity of the detection method was calculated as by the naked eye. When an instrument was detected as damaged by the naked eye, the damage assessment was stopped and the instrument was considered to be damaged by the other two methods, as well. Results: Damage was found in 178 instruments. Sensitivity of the naked eye was calculated to be 49.7%, for the loupe 66.2% and for the operating microscope 76.5%. The three methods of damage assessment had significant differences (p < 0.05) in sensitivity. Conclusion: It was concluded that there is a significant difference between age groups in estimating instrument damage. Also, it was noted that the damage assessment with the naked eye and optical aids were different. Finally, in terms of ease of damage recognition, significant differences between the types of engine-driven endodontic instruments were found. However, no type of instrument was more prone to damage than any other type of instrument.

Objective: The aim of this study was to evaluate the usage of caries risk assessment (CRA) by Croatian general practitioners and evaluate their knowledge and attitudes towards CRA. Material and methods: A link to an online questionnaire was sent via e-mail to a sample of 1,500 general dentists in Croatia. The obtained data were analyzed using descriptive statistics, logistic regression analyses and chi-square tests. Results: Of 257 respondents, 47% performed CRA routinely, but only 4.5% of them used a specific CRA form. The significance of different actors in the development of a treat-ment plan varied considerably among respondents. Furthermore, in 77% of the respondents CRA was a basis for planning individual caries prevention (ICP). The association between CRA and ICP, and be-tween CRA and treatment planning was statistically significant (p=0.001). The practitioners doing CRA more often plan their treatment and ICP according to CRA. The use of CRA was not influenced by specialty and dentists’ experience. Conclusions: In a considerable percentage (53%) of Croatian general dentists, CRA is not part of their routine practice, and there is a strong association between the use of CRA and treatment plans and ICP. There is a need to promote the use of CRA in daily dental practice in Croatia.

Objective: To provide a narrative review of the preprocedural mouth rinse protocols suggested for oral surgery in order to contrast the presence of SARS-CoV-2 in aerosol. Sources and Methods: Electronic searches were performed in medical databases PubMed, Medline, CINAHN and Scopus to identify relevant studies published up until the third week of April 2020. This research was supplemented by exploration through a web-based search engine as well as a manual search for international and national guidelines. Studies and protocols which suggested preoperative mouth rinsing as a recommended measure during the COVID-19 outbreak were included. Given the small number of studies, a narrative literature review was conducted. In total, 15 references (11 articles and 4 guidelines) were considered relevant and were critically analysed. Conclusion: The findings show a high heterogeneity in the protocols suggested. Further research is required to better understand the viral features and epidemiologic characteristics of this new virus and to test the efficacy of commonly used antiseptics against SARS-CoV-2 in future clinical trials. However, the use of chlorhexidine, hydrogen peroxide, PVP-I and cetylpyridinium chloride in contrasting the spread of Covid-19 is described as advisable and substantial in different publications.

AimTo conduct a survey of current meta-epidemiological studies to identify additional trial design characteristics that may be associated with significant over- or underestimation of the treatment effect and to use such identified characteristics as a basis for the formulation of new CQS appraisal criteria.Materials and methodsWe retrieved eligible studies from two systematic reviews on this topic (latest search May 2015) and searched the databases PubMed and Embase for further studies from June 2015 -March 2022. All data were extracted by one author and verified by another. Sufficiently homogeneous estimates from single studies were pooled using random-effects meta-analysis. Trial design characteristics associated with statistically significant estimates from single datasets (which could not be pooled) and meta-analyses were used as a basis to formulate new or amend existing CQS criteria.ResultsA total of 38 meta-epidemiological studies were identified. From these, seven trial design characteristics associated with statistically significant over- or underestimation of the true therapeutic effect were found.ConclusionOne new criterion concerning double-blinding was added to the CQS, and the original criteria for concealing the random allocation sequence and for minimum sample size were amended.

Objective: The objective of the study was to compare compressive strengths of two glass ionomerbased materials, with and without a light-cured, nano-filled coating, after cyclic loading and thermocycling. Materials and methods: To determine compressive strength of new restorative materials over a longer period of time, materials were analysed under simulated conditions where cyclic loading replicated masticatory loading and thermocycling simulated thermal oscillations in the oral cavity. Four groups of samples (n=7)—(1) Equia Fil (GC, Tokyo, Japan) uncoated; (2) Equia Fil coated with Equia Coat (GC, Tokyo, Japan); (3) Equia Forte Fil (GC, Tokyo, Japan) uncoated; and (4) Equia Forte Fil coated with Equia Forte coat (GC, Tokyo, Japan)—were subjected to cyclic loading (240,000 cycles) using a chewing simulator (MOD, Esetron Smart Robotechnologies, Ankara, Turkey). Results: Compressive strength measurements were performed according to ISO 9917-1:2007, using the universal mechanical testing machine (Instron, Lloyd, UK). Scanning electron microscope (SEM) analysis was performed after thermocycling. There were no statistically significant differences between Equia Fil and Equia Forte Fil irrespective of the coating (p

Acidic drinks are known to exert negative effects on the surface properties of dental restorative materials. However, the effect of increasingly popular green smoothie drinks has not been addressed so far. The present study investigated the effect of cyclic immersions (5 min daily over 30 days) in a green smoothie drink on the surface properties of contemporary dental restorative materials, including resin composites, an alkasite, and a glass hybrid. Vickers microhardness, profile roughness, and perceptible color change in the CIE L* a* b* color space were evaluated as clinically relevant properties of the material surface. After 30-day green smoothie immersion, microhardness values either decreased by 8–28% (for resin composites) or increased by up to 91% (for glass hybrid). The increase in profile roughness (Ra parameter) of smoothie-immersed specimens was 7–26 times higher compared to the control group. The perceptible color change (ΔE*) in the smoothie group was 3–8 times higher compared to the control group. Overall, this study demonstrated that daily exposure of dental restorations made from resin composites, alkasites, and glass hybrid materials to a green smoothie drink can significantly accelerate material degradation, which is reflected as surface softening, as well as higher roughness and higher perceptible color change.

Objective: This in vitro study compares the fluoride release from microlaminated glass ionomer based on glass hybrid technology coated with two different surface coating agents. Materials and Methods: A total of 18 samples were divided into three groups of six samples each: (1) glass ionomer Equia Forte Fil coated with Equia Forte Coat (Equia+EC), (2) glass ionomer Equia Forte Fil coated with GC Fuji Varnish (Equia+VC) and (3) uncoated glass ionomer Equia Forte (EQUIA cont). Fluoride release was measured using an ion-selective electrode (ORION EA 940) after 24 hours, 4 days, 30 days and 64 days. Repeated measures ANOVA, multiple comparisons, Tukey’s test and paired t-test were used to test the differences between the groups. Results: The differences between the groups and four time points were statistically significant (ANOVA, p

The objective of this study was to evaluate the efficacy of reciprocating instruments in the removal of bioceramic and epoxy resin-based sealers using micro-CT analysis. Root canals of 40 extracted human teeth were instrumented with a size R25 Reciproc instrument. Specimens were randomly divided into two groups (n = 20) according to the root canal filling material. In the first group, root canals were obturated with AH Plus sealer and Reciproc R25 gutta-percha. In the second group, a combination of bioceramic gutta-percha (TotalFill BC) and bioceramic sealer (TotalFill BC) was used. After one week, the retreatment of all specimens was performed using Reciproc instruments. To analyze the differences in the filling remnants, specimens were scanned in a micro-CT device after obturation and after the retreatment procedure. Statistical analysis was performed using the Mann–Whitney U test (p < 0.05). A combination of bioceramic sealer and bioceramic gutta-percha was more effectively removed from canals using a reciprocating instrument, with a filling remnants volume of 4.01 ± 3.13 mm3, in comparison to the combination of epoxy resin-based sealer and gutta-percha (6.96 ± 2.70 mm3) (p < 0.05). A reciprocating instrument was more effective in removing bioceramic sealers than epoxy resin-based sealers, although none of the root canal filling materials were completely removed from the root canals.

Background: The aim of this study was to evaluate the effects of incorporation of hydroxyapatite (HA) derived from cuttlefish bone on the microhardness, surface roughness (SR), and fluoride release (FR) of conventional cure, and resin-modified glass-ionomer cement. Methods: There were four groups for each tested material; experimental glass-ionomer were made by addition and of 2, 5, and 10 wt % HA respectively to conventional glass-ionomers Fuji II LC and Fuji IX GP Extra. One group was prepared without the addition of HA particles. For SR and microhardness measurements sectional Teflon molds (5 mm in diameter and 2 mm deep) were used to prepare 10 samples per group (n = 80). The samples were stored in distilled water at 37 °C for 7 days prior to testing. The SR was measured using a contact type profilometer and the microhardness was determined using a Vickers micro-hardness tester at a load of 980 g for 15 s. For FR measurements, there were six samples per group (n = 48), prepared in Teflon molds (8 mm in diameter and 2 mm deep). The FR was measured with an ionoselective electrode in triplicates after 24 h, 7 days, and 45 days. Statistical analysis was performed using one-way ANOVA with Tukey post-hoc test. Results and Conclusion: Microhardness values obtained for Fuji II modified with 10 wt % HA were significantly higher compared to the other two groups tested. Comparison of materials with respect to SR showed significant difference between them (p < 0.0001) with Fuji II and Fuji IX modified with HA having higher SR values. Regarding FR, Fuji IX showed statistically significant higher results than Fuji II, independently of HA modification, and groups modified with 2 and 5 wt % HA showed significantly increased fluoride release in all three time points.

This ex vivo study aimed to compare the microtensile bond strength of fiber-reinforced and particulate filler composite to coronal and pulp chamber floor dentin using a self-etching adhesive system. Coronal dentin of 40 human molar teeth was exposed by cutting occlusal enamel with a low-speed saw. Teeth were then randomly divided into two groups (n = 20). The first group was left as is, while in the second group, pulp chamber floor dentin was exposed by trepanation. After placement of a self-etching adhesive system (G-aenial Bond, GC, Tokyo, Japan), groups were further divided into two sub-groups (n = 10) according to the type of composite: fiber-reinforced composite (EP, everX Posterior, GC, Tokyo, Japan) and particulate filler composite (GP, G-aenial Posterior, GC, Tokyo, Japan). Then, composite blocks were built up. Sticks (1.0 × 1.0 mm2) were obtained from each specimen by sectioning, then microtensile bond strength (μTBS) test was performed. Statistical analysis included one-way ANOVA test and Student’s t-test (p < 0.05). μTBS values were 22.91 ± 14.66 and 24.44 ± 13.72 MPa on coronal dentin, 14.00 ± 5.83 and 12.10 ± 8.89 MPa on pulp chamber floor dentin for EP and GP, respectively. Coronal dentin yielded significantly higher μTBS than pulp chamber floor dentin (p < 0.05), independently from the tested composites.

The purpose of the study was to determine the wear rate of Equia Forte HT Fil with Equia Forte Coat or without coating and compare it with Fuji IX GP high-viscosity glass ionomer cement (GIC) in conditions with acid load or at neutral pH. The samples were stored for 7 days: (1) in artificial saliva, (2) in artificial saliva and cyclically exposed to low pH, and (3) in distilled water and cyclically exposed to low pH. Wear was determined by measuring the difference in mass before and after brushing in an abrasion testing device. The wear of Fuji IX GP was significantly higher than that of Equia Forte HT Fil with or without coating (p = 0.000). The difference between Equia Forte HT Fil with and without Coat was not statistically significant (p < 0.803). The differences in wear resistance between samples stored in saliva and in distilled water were not significant (p = 0.588). Periodic exposure to the low pH solution significantly affected the wear resistance of all materials (p = 0.000). Equia Forte HT Fil was more resistant to wear than Fuji IX GP in all storage conditions. A resinous coat did not significantly increase wear resistance.

Objective: The aim of this study was to investigate the cytotoxicity of two different bioactive root canal sealers: one based on mineral trioxide aggregate, MTA Fillapex (Angelus, Solucoes Odontologicas, Londrina, PR, Brazil), and the other based on bioceramics, Endosequence BC Sealer (Brasseler, Savannah, Georgia, USA), in culture of mouse L929 fibroblasts. Materials and methods: Mouse fibroblasts (L929), obtained from subcutaneous connective tissue of mouse line C3Hf, were cultivated in plastic culture flasks in an incubator at 37ºC, with 5% CO2 and 90% humidity. Freshly mixed Endosequence BC Sealer and MTA Fillapex (0.1 g each) were placed on sterile teflon discs, 6 mm in diameter. Teflon discs with the materials as well as empty discs serving as control were placed in wells of 12-well plate. After incubation times of 1, 6, 20 and 24 hours, the teflon discs were removed from the wells and the number of viable cells was determined using trypan blue in Neubauer chamber. Results: In comparison to the control group, MTA Fillapex had significantly less viable cells for all incubation periods (p≤0.05), while Endosequence BC sealer had significantly less viable cells after 6, 20, and 24 hours of incubation (p≤0.05). MTA Fillapex exhibited ignificantly less viable cells in comparison to Endosequence BC sealer after the first hour and after 20 hours of incubation (p≤0.05), while for the other incubation periods there were no significant differences (p≥0.05). Conclusion: MTA Fillapex and Endosequence BC sealer were both cytotoxic in cultures of mouse L929 fibroblasts.

Objective: The aim of this in vitro study was to investigate the effect of laser activated irrigation (LAI) using two erbium lasers on bond strength of individually formed fiber-reinforced composite (FRC) posts to root canal dentin. Materials and methods: Twenty-seven single-rooted human teeth were endodontically treated and after post space preparation divided into three groups (n=9 per group), according to the pre-treatment of post space preparation: 1) Conventional syringe irrigation (CSI) and saline; 2) Er.YAG photon-induced photoacoustic streaming (PIPS) technique and saline; 3) Er,Cr:YSGG activated irrigation with RFT2 tip. Two specimens from each group were used for SEM analysis. The remaining specimens (n=7 per group) received individually formed FRC post, everStick POST, luted with self-adhesive cement, G-CEM LinkAce. After cementation, the roots were perpendicularly sectioned into 1 mm thin sections and a push-out test was carried out (0.5 mm/min). The data were calculated as megapascals and were log transformed and statistically analysed using one-way ANOVA at the level of significance set at 5%. Results: In the control group, the smear layer was still present. In the Er:YAG group, the smear layer was removed. In the Er,Cr:YSGG group, the smear layer was partially removed. The Er,Cr:YSGG group achieved the highest bond strength values, followed by the control group and then the Er:YAG group, but no statistically significant difference was found in bond strength values in the tested group of post space pretreatment (p=0.564). Conclusions: LAI using two erbium lasers, with PIPS or RFT2 tip, did not affect the bond strength of individually formed FRC posts to root canal dentin.

The purpose of this study was to evaluate the effects of the incorporation of hydroxyapatite (HA) derived from cuttlefish bone on the mechanical properties of glass ionomer cements (GIC). Fuji II LC and Fuji IX GP Extra (GC Corporation, Tokyo, Japan) were used in the study. There were four groups (n = 11–18) for each material: a group without the addition of HA particles and three groups modified by incorporation of 2, 5, and 10 wt% HA. The tests were performed on a universal testing machine (Shimadzu, Duisburg, Germany) and descriptive statistics, two-way analysis of variance (ANOVA) for the comparison of three mechanical properties, and one-way ANOVA for the comparison of different concentrations for each material were performed. Regarding the Fuji IX groups, compressive strength (CS) and flexural strength (FS) were highest in the group without HA particles added. The differences in CS between the Fuji IX group without HA particles and the Fuji IX groups with 2 wt% HA and 10 wt% HA were significant. The Fuji II 5 wt% HA group exhibited higher diametral tensile strength (DTS) and CS than other Fuji II groups, but not significantly. The Fuji II group, modified with 10 wt% HA, exhibited significantly higher FS than the Fuji II group without HA particles (p < 0.05). Porous HA incorporated into the Fuji IX groups had a significant impact on mechanical properties only in the Fuji IX 5 wt% HA group. Fuji II groups modified with 10 wt% HA showed the most favorable results with respect to FS.

The aim of the study was to evaluate the effects of incorporation of Al2O3, ZrO2 and TiO2 nanoparticles into glass−ionomer cements (GICs). Two different GICs were used in the study. Four groups were prepared for each material: the control group (without nanoparticles) and three groups modified by the incorporation of nanoparticles at 2, 5 or 10 wt %, respectively. Cements were mixed and placed in moulds (4 mm × 6 mm); after setting, the samples were stored in saline (one day and one week). Compressive strengths were measured and the morphology of the fractured surfaces was analyzed by scanning electron microscopy. The elements released into the storage solutions were determined by Inductively coupled plasma-optical emission spectrometry (ICP-OES). Addition of nanoparticles was found to alter the appearance of cements as examined by scanning electron microscopy. Compressive strength increased with the addition of ZrO2 and especially TiO2 nanoparticles, whereas the addition of Al2O3 nanoparticles generally weakened the cements. The ion release profile of the modified cements was the same in all cases. The addition of Al2O3, ZrO2 and TiO2 nanoparticles into GICs is beneficial, since it leads to reduction of the microscopic voids in the set cement. Of these, the use of ZrO2 and TiO2 nanoparticles also led to increased compressive strength. Nanoparticles did not release detectable levels of ions (Al, Zr or Ti), which makes them suitable for clinical use.

This article discusses the evolution of social public housing in the Yugoslav Federation with reference to Serbia, in relation to a number of socioeconomic- cultural and political variables. The focus on different aspects of the housing problem demonstrates the current challenges and limitations of each of them. The changes that occurred quickly denied the experience of the socialist period, while a reading of the experiences of the past might have been useful to draw interesting suggestions to guide current policies in the sector, which follow the implementation of EU directives in a manner that is uncritical and decontextualised.

The scope of this study is to bring un updated and detailed analyses of the role of International Commission for the Conservation of Atlantic Tunas (ICCAT), as well as discuss applied measures of protection of the bluefin tuna in Croatia. On the yearly basis, ICCAT brings recommendations that have committing character for all the member countries and which include the minimum catch and farming quotas, temporal and spatial limitation of tuna fisheries, along a number of other controlling regulations. It is of wide importance for Croatia the type of measures directed for the management of east stocks of the bluefin tuna (Thunnus thynnus).

In the Republic of Croatia, fish cage farming is one of the most important economic activities. Fish cage farms inevitably influence the quality of marine environment. Environment protection measures are established in order to minimize negative effects on the stability of ecosystem. The aim of this paper is to give an overview on the procedure of fish cage farm allocation, environment protection measures, as also as program of monitoring before, during and after fish farming allocation.

The main task of this paper is to describe digestive tract of bluefin tuna, with special focus on the liver. The samples for the research on tuna digestive tract where taken on the tuna farm »Sardina« d.d. Postira. The investigation were done on 22 samples (necropsy and photography of organs, Canon digital camera), 30 samples liver of unfatted tuna, 30 samples liver of fatted tuna and 20 histologic samples of liver before and after fattening. The quality of nutrition directly affects the differences of longitudinal and latitudinal values of the hepatosomatic index and the histology of liver of fatted and unfitted fish. Intensive, lipid–rich nutrition increases the quantity of the fat stored in liver therefore causing higher hepatosomatic index in fatted tuna. Histologic examination of fatted tuna indicates a beginning of hepatocytes degeneration with vacuolization of the cell and decentralized nuclei. Lack of eosinophilic granules in cytoplasm of hepatocytes indicates the cell’s inability of doing enzymatic activity, respectively its dysfunction.