Search

Purpose Based on current scientific evidence and best practice, the first Dutch multidisciplinary practice guideline for occupational health professionals was developed to stimulate prevention and enhance work participation in patients with low back pain (LBP) and lumbosacral radicular syndrome (LRS). Methods A multidisciplinary working group with health care professionals, a patient representative and researchers developed the recommendations after systematic review of evidence about (1) Risk factors, (2) Prevention, (3) Prognostic factors and (4) Interventions. Certainty of the evidence was rated with GRADE and the Evidence to Decision (EtD) framework was used to formulate recommendations. High or moderate certainty resulted in a recommendation “to advise”, low to very low in a recommendation “to consider”, unless other factors in the framework decided differently. Results An inventory of risk factors should be considered and an assessment of prognostic factors is advised. For prevention, physical exercises and education are advised, besides application of the evidence-based practical guidelines “lifting” and “whole body vibration”. The stepped-care approach to enhance work participation starts with the advice to stay active, facilitated by informing the worker, reducing workload, an action plan and a time-contingent increase of work participation for a defined amount of hours and tasks. If work participation has not improved within 6 weeks, additional treatments should be considered based on the present risk and prognostic factors: (1) physiotherapy or exercise therapy; (2) an intensive workplace-oriented program; or (3) cognitive behavioural therapy. After 12 weeks, multi-disciplinary (occupational) rehabilitation therapy need to be considered. Conclusions Based on systematic reviews and expert consensus, the good practice recommendations in this guideline focus on enhancing work participation among workers with LBP and LRS using a stepped-care approach to complement existing guidelines focusing on recovery and daily functioning.

Contains fulltext : 176916.pdf (Publisher’s version ) (Closed access) PURPOSE: Femoral tunnel positioning is an important factor in anatomical ACL reconstructions. To improve accuracy, lateral radiographic support can be used to determine the correct tunnel location, applying the quadrant method. Piefer et al. (Arthroscopy 28:872-881, 2012) combined various outcomes of eight studies applying this method to one guideline. The studies included in that guideline used various insertion margins, imaging techniques and measurement methods to determine the position of the ACL centres. The question we addressed is whether condensing data from various methods into one guideline, results in a more accurate guideline than the results of one study. METHODS: The accuracy of the Piefer's guideline was determined and compared to a guideline developed by Luites et al. (2000). For both guidelines, we quantified the mean absolute differences in positions of the actual anatomical centres of the ACL, AM and PL measured on the lateral radiographs of twelve femora with the quadrant method and the positions according to the guidelines. RESULTS: The accuracy of Piefer's guidelines was 2.4 mm (ACL), 2.7 mm (AM) and 4.6 mm (PL), resulting in positions significantly different from the actual anatomical centres. Applying Luites' guidelines for ACL and PL resulted in positions not significantly different from the actual centres. The accuracies were 1.6 mm (ACL) and 2.2 mm (PL and AM), which were significantly different from Piefer for the PL centres, and therefore more accurate. CONCLUSIONS: Condensing the outcomes of multiple studies using various insertion margins, imaging techniques and measurement methods, results in inaccurate guidelines for femoral ACL tunnel positioning at the lateral view. CLINICAL RELEVANCE: An accurate femoral tunnel positioning for anatomical ACL reconstruction is a key issue. The results of this study demonstrate that averaging of various radiographic guidelines for anatomical femoral ACL tunnel placement in daily practice, can result in inaccurate tunnel positions. LEVEL OF EVIDENCE: Diagnostic study, Level 1.

We determined the short-term clinical outcome and migration within the bone of the humeral cementless component of the Instrumented Bone Preserving (IBP) total elbow replacement in a series of 16 patients. There were four men and 12 women with a mean age at operation of 63 years (40 to 81). Migration was calculated using radiostereometric analysis. There were no intra-operative complications and no revisions. At two-year follow-up, all patients showed a significant reduction in pain and functional improvement of the elbow (both p < 0.001). Although ten components (63%) showed movement or micromovement during the first six weeks, 14 (88%) were stable at one year post-operatively. Translation was primarily found in the proximal direction (median 0.3 mm (interquartile range (IQR) -0.09 to 0.8); the major rotational movement was an anterior tilt (median 0.7° (IQR 0.4° to 1.6°)). One malaligned component continued to migrate during the second year, and one component could not be followed beyond three months because migration had caused the markers to break off the prosthesis. This study shows promising early results for the cementless humeral component of the IBP total elbow replacement. All patients had a good clinical outcome, and most components stabilised within six months of the operation. Cite this article: Bone Joint J 2014;96-B:229–36.

Background Femoral tunnel positioning is a difficult, but important factor in successful anterior cruciate ligament (ACL) reconstruction. Computer navigation can improve the anatomical planning procedure besides the tunnel placement procedure. Methods The accuracy of the computer-assisted femoral tunnel positioning method for anatomical double bundle ACL-reconstruction with a three-dimensional template was determined with respect to both aspects for AM and PL bundles in 12 cadaveric knees. Results The accuracy of the total tunnel positioning procedure was 2.7 mm (AM) and 3.2 mm (PL). These values consisted of the accuracies for planning (AM:2.9 mm; PL:3.2 mm) and for placement (about 0.4 mm). The template showed a systematic bias for the PL-position. Conclusions The computer-assisted templating method showed high accuracy for tunnel placement and has promising capacity for application in anatomical tunnel planning. Improvement of the template will result in an accurate and robust navigation system for femoral tunnel positioning in ACL-reconstruction

Background The acetabular component has remained the weakest link in hip arthroplasty regarding achievement of long-term survival. Primary fixation is a prerequisite for long-term performance. For this reason, we investigated the stability of a unique cementless titanium-coated elastic monoblock socket and the influence of supplementary screw fixation. Patient and methods During 2006–2008, we performed a randomized controlled trial on 37 patients (mean age 63 years (SD 7), 22 females) in whom we implanted a cementless press-fit socket. The socket was implanted with additional screw fixation (group A, n = 19) and without additional screw fixation (group B, n = 18). Using radiostereometric analysis with a 2-year follow-up, we determined the stability of the socket. Clinically relevant migration was defined as > 1 mm translation and > 2o rotation. Clinical scores were determined. Results The sockets without screw fixation showed a statistically significantly higher proximal translation compared to the socket...

Background and purpose In open-wedge, valgus osteotomy of the upper tibia, there are concerns regarding the initial stability and ability to retain the correction. Rehabilitation protocols vary depending on the osteotomy technique and the fixation method. Angle-stable implants offer superior initial stability. Early full weight bearing appears to be possible using these implants. In this prospective cohort study, we measured migration in open-wedge osteotomy in patients following an early full weight bearing protocol and compared the results to those from a historical cohort of open-wedge osteotomy patients who followed a standard protocol (full weight bearing after 6 weeks) using radiostereometry. Methods 14 open-wedge osteotomies fixated with the angle-stable Tomofix implant were performed; patients were allowed full weight bearing as soon as pain and wound healing permitted. Radiostereometry was used to measure motion across the osteotomy at regular intervals. Improvement in pain and functional outcome were assessed postoperatively. The results were compared to those from a group of 23 patients who had undergone the same operation but had used a standard rehabilitation protocol. Results There were no adverse effects because of the early full weight bearing protocol. There were no differences in motion at the osteotomy between groups as measured by radiostereometry. In both groups, pain and function improved substantially without any differences between groups. Patients in the early weight bearing group achieved the same result but in a shorter time. Interpretation Tomofix-plate-fixated open-wedge high tibial osteotomy allows early full weight bearing without loss of correction.

Contains fulltext : 52340.pdf (Publisher’s version ) (Open Access) The anterior cruciate ligament (ACL) consists of an anteromedial bundle (AMB) and a posterolateral bundle (PLB). A reconstruction restoring the functional two-bundled nature should be able to approximate normal ACL function better than the most commonly used single-bundle reconstructions. Accurate tunnel positioning is important, but difficult. The purpose of this study was to provide a geometric description of the centre of the attachments relative to arthroscopically visible landmarks. The AMB and PLB attachment sites in 35 dissected cadaver knees were measured with a 3D system, as were anatomical landmarks of femur and tibia. At the femur, the mean ACL centre is positioned 7.9 +/- 1.4 mm (mean +/- 1 SD) shallow, along the notch roof, from the most lateral over-the-top position at the posterior edge of the intercondylar notch and from that point 4.0 +/- 1.3 mm from the notch roof, low on the surface of the lateral condyle wall. The mean AMB centre is at 7.2 +/- 1.8 and 1.4 +/- 1.7 mm, and the mean PLB centre at 8.8 +/- 1.6 and 6.7 +/- 2.0 mm. At the tibia, the mean ACL centre is positioned 5.1 +/- 1.7 mm lateral of the medial tibial spine and from that point 9.8 +/- 2.1 mm anterior. The mean AMB centre is at 3.0 +/- 1.6 and 9.4 +/- 2.2 mm, and the mean PLB centre at 7.2 +/- 1.8 and 10.1 +/- 2.1 mm. The ACL attachment geometry is well defined relative to arthroscopically visible landmarks with respect to the AMB and PLB. With simple guidelines for the surgeon, the attachments centres can be found during arthroscopic single-bundle or double-bundle reconstructions.

Femoral tunnel positioning is a difficult, but important factor in successful anterior cruciate ligament (ACL) reconstruction. Computer navigation can improve the anatomical planning procedure besides the tunnel placement procedure.The accuracy of the computer-assisted femoral tunnel positioning method for anatomical double bundle ACL-reconstruction with a three-dimensional template was determined with respect to both aspects for AM and PL bundles in 12 cadaveric knees.The accuracy of the total tunnel positioning procedure was 2.7 mm (AM) and 3.2 mm (PL). These values consisted of the accuracies for planning (AM:2.9 mm; PL:3.2 mm) and for placement (about 0.4 mm). The template showed a systematic bias for the PL-position.The computer-assisted templating method showed high accuracy for tunnel placement and has promising capacity for application in anatomical tunnel planning. Improvement of the template will result in an accurate and robust navigation system for femoral tunnel positioning in ACL-reconstruction.

Background A hallmark feature of multidisciplinary team care is patient-centeredness; every aspect of patient9s health status is systematically evaluated and the treatment goals and plans for interventions are jointly set, evaluated, attuned.1 But the perceptions and values of patients and health care professionals (HCPs) about the role and degree of active involvement of patients in team care has received little attention. Objectives To explore patients9 and HCPs views on the meaning and role of patient participation in team care, and to explore the experiences of patient membership in team conference. Methods This study was conducted before and after the introduction of patients in team conference. To explore the views about patient participation semi-structured face-to-face interviews were held with 10 patients with rheumatic diseases eligible for or participating in multidisciplinary treatment and 12 HCPs. After the introduction of patients9 membership in the team conference, telephone interviews with 8 patients and a focus group (n=5) with HCPs were held. The interviews and the focus group were audiotaped and described verbatim. Thematic content analysis of the interviews were performed by two researchers independently and discussed until consensus was reached. Similarly, data of the telephone interviews and focus group were analysed and identified topics were discussed by a rheumatology nurse and a researcher. Results Participants described patient participation in terms of an active participatory behaviour of the patient (e.g. willingness to change, motivation, asking questions, expressing their own opinions, treatment adherence), an open respectful dialogue between patients and HCPs based on trust and equality, and (shared) responsibility of treatment. Participants indicated that patients9 involvement in team care varied, from passive receiver to meaningful exchange between patients and HCPs. Opportunities for improvement were identified: improving information about the treatment, facilitating patient involvement in goal-setting, planning and evaluation of treatment, and stimulating patient9s responsibility of care. After the introduction of patients in team conference, the evaluation of patient membership revealed that although some patients felt tense the atmosphere felt safe and they experienced a honest, transparent and respectful interaction between themselves and HCPs. Patients felt they were taken seriously and that their needs were taken into account, the treatment goals were set in mutual agreement and the resulting therapeutic interventions were clear and satisfactorily. HCPs valued patient9s membership in team conference, although they needed to get used to it. HCPs experienced an open, honest and truthful team dialogue and a truly shared treatment plan leading to more patient commitment to treatment. The limited time, prior to team conference, to formulate a draft treatment plan to be discussed during the team conference, was seen as a disadvantage, especially in complex cases. Conclusions Patients and HCPs highly valued patient9s membership in the multidisciplinary team conference. Treatment plans were developed in partnership between patients and HCPs, and team interaction was based on mutual trust and respect. This study underscores the value of stimulating partnership in team care. References Vliet Vlieland et al. (2006). Does everybody need a team? J Rheumatol 33(9):1897–9. Disclosure of Interest None declared

Contains fulltext : 110668.pdf (Publisher’s version ) (Closed access) Anterior cruciate ligament reconstruction techniques are evolving with innovations like double-bundle (DB) grafts and computer assistance. The current DB techniques do not appear to make the clinical difference yet. Insight in various techniques may lead to better results. In this study, the anterior laxity of a DB reconstruction with an anteromedial (AM) graft fixated in 90 degrees of flexion and a posterolateral (PL) graft fixated in 20 degrees and computer-assisted anatomically placed femoral attachments was compared to normal values and single-bundle grafts. In 8 fresh-frozen human cadaveric knees, the anterior laxity was tested from 0 degrees to 90 degrees flexion, with a 100Newton (N) anterior tibial load in joints with (1) intact ACL, (2) torn ACL, (3) single-bundle (SB) graft tensed with 15N in 20 degrees , (4) anatomic AM graft tensed with 15N in 90 degrees , (5) anatomic PL graft tensed with 15N in 20 degrees , and (6) anatomic DB graft (4+5). All reconstructions caused a posterior position of the tibia. Relative to the normal anterior laxity, the single-bundle techniques showed significantly increased laxities: The SB technique in 0 degrees (+1.1mm) and 15 degrees (+1.7mm); The AM reconstructions in 45 degrees (+1.6mm) and 90 degrees (+1.5mm); The PL reconstructions in all angles (from +1.4 to +2.3mm), except in 0 degrees . The anatomic DB technique showed no significantly increased laxities and restored normal laxity in all angles. 01 oktober 2012

Contains fulltext : 96804.pdf (Publisher’s version ) (Closed access) Femoral graft placement is an important factor in the success of anterior cruciate ligament (ACL) reconstruction. In addition to improving the accuracy of femoral tunnel placement, Computer Assisted Surgery (CAS) can be used to determine the anatomic location. This is achieved by using a 3D femoral template which indicates the position of the anatomical ACL center based on endoscopically measurable landmarks. This study describes the development and application of this method. The template is generated through statistical shape analysis of the ACL insertion, with respect to the anteromedial (AM) and posterolateral (PL) bundles. The ligament insertion data, together with the osteocartilage edge on the lateral notch, were mapped onto a cylinder fitted to the intercondylar notch surface (n = 33). Anatomic variation, in terms of standard variation of the positions of the ligament centers in the template, was within 2.2 mm. The resulting template was programmed in a computer-assisted navigation system for ACL replacement and its accuracy and precision were determined on 31 femora. It was found that with the navigation system the AM and PL tunnels could be positioned with an accuracy of 2.5 mm relative to the anatomic insertion centers; the precision was 2.4 mm. This system consists of a template that can easily be implemented in 3D computer navigation software. Requiring no preoperative images and planning, the system provides adequate accuracy and precision to position the entrance of the femoral tunnels for anatomical single- or double-bundle ACL reconstruction.

Valgus high tibial osteotomy for osteoarthritis of the medial compartment of the knee can be performed using medial opening- and lateral closing-wedge techniques. The latter have been thought to offer greater initial stability. We measured and compared the stability of opening- and closing-wedge osteotomies fixed by TomoFix plates using radiostereometry in a series of 42 patients in a prospective, randomised clinical trial. There were no differences between the opening- and closing-wedge groups in the time to regain knee function and full weight-bearing. Pain and knee function were significantly improved in both groups without any differences between them. All the osteotomies united within one year. Radiostereometry showed no clinically relevant movement of bone or differences between either group. Medial opening-wedge high tibial osteotomy secured by a TomoFix plate offers equal stability to a lateral closing-wedge technique. Both give excellent initial stability and provide significantly improved knee function and reduction in pain, although the opening-wedge technique was more likely to produce the intended correction.

UNLABELLED New prostheses should be evaluated for stability and clinical performance. In a prospective randomized clinical trial, we implanted 22 titanium (Ti) and 20 hydroxyapatite-coated (HA) ProxiLock femoral hip prostheses during total hip arthroplasty in 42 patients. The patients were followed for 24 months with clinical, radiographic and radiostereometric analysis. Full weightbearing was allowed immediately postoperatively. One patient with a titanium stem was lost to followup. During the first two months, 34 of the 41 stems subsided and/or rotated towards retroversion, regardless of stem type. At the 24-month followup 35 of the 41 prostheses were either fully stabilized (16 HA and 11 Ti stems) or had clinical irrelevant migration (four HA and four Ti stems). Six Ti prostheses showed continuous migrations with maximums of 4.7 mm translation and 12.2 degrees retroversion; four of these were revised, the other two had no clinical complaints. CLINICAL RELEVANCE The migration pattern we found indicates insufficient primary fixation of the ProxiLock stem in an immediate full weightbearing protocol. The HA coating improves the secondary stability of the prosthesis compared to the uncoated stem. Early migration is associated with an increased risk of possible future loosening and revision, and therefore we discontinued the use of this prosthesis. LEVEL OF EVIDENCE Therapeutic Level I. See Guidelines for Authors for a complete description of levels of evidence.