Search

Robotization has become common in modern factories due to its efficiency and cost-effectiveness. Lots of robots and manipulators share their workspaces with humans what could lead to hazardous situations causing health damage or even death. This article presents a real-time safety system applying the distributed computing paradigm for a collaborative robot. The system consists of detection/sensing modules connected with a server working as decision-making system. Each configurable sensing module pre-processes vision information and then sends to the server the images cropped to new objects extracted from a background. After identifying persons from the images, the decision-making system sends a request to the robot to perform pre-defined action. In the proposed solution, there are indicated three safety zones defined by three different actions on a robot motion. As identification method, state-of-the-art of Machine Learning algorithms, the Histogram of Oriented Gradients (HOG), Viola-Jones, and You Only Look Once (YOLO), have been examined and presented. The industrial environment tests indicated that YOLOv3 algorithm outperformed other solutions in terms of identification capabilities, false positive rate and maximum latency., open access

The assessment of skills is essential and desirable in areas such as medicine, security, and other professions where mental, physical, and manual skills are crucial. However, often such assessments are performed by people called “experts” who may be subjective and are able to consider a limited number of factors and indicators. This article addresses the problem of the objective assessment of driving style independent of circumstances. The proposed objective assessment of driving style is based on eight indicators, which are associated with the vehicle’s speed, acceleration, jerk, engine rotational speed and driving time. These indicators are used to estimate three driving style criteria: safety, economy, and comfort. The presented solution is based on the embedded system designed according to the Internet of Things concept. The useful data are acquired from the car diagnostic port—OBD-II—and from an additional accelerometer sensor and GPS module. The proposed driving skills assessment method has been implemented and experimentally validated on a group of drivers. The obtained results prove the system’s ability to quantitatively distinguish different driving styles. The system was verified on long-route tests for analysis and could then improve the driver’s behavior behind the wheel. Moreover, the spider diagram approach that was used established a convenient visualization platform for multidimensional comparison of the result and comprehensive assessment in an intelligible manner. © 2018 by the authors. Licensee MDPI, Basel, Switzerland., open access

Over the last few decades, life expectancy has increased significantly. However, elderly people who live on their own often need assistance due to mobility difficulties, symptoms of dementia or other health problems. In such cases, an autonomous supporting system may be helpful. This paper proposes the Internet of Things (IoT)-based information system for indoor and outdoor use. Since the conducted survey of related works indicated a lack of methodological approaches to the design process, therefore a Design Methodology (DM), which approaches the design target from the perspective of the stakeholders, contracting authorities and potential users, is introduced. The implemented solution applies the three-axial accelerometer and magnetometer, Pedestrian Dead Reckoning (PDR), thresholding and the decision trees algorithm. Such an architecture enables the localization of a monitored person within four room-zones with accuracy; furthermore, it identifies falls and the activities of lying, standing, sitting and walking. Based on the identified activities, the system classifies current activities as normal, suspicious or dangerous, which is used to notify the healthcare staff about possible problems. The real-life scenarios validated the high robustness of the proposed solution. Moreover, the test results satisfied both stakeholders and future users and ensured further cooperation with the project. © 2017 by the authors., open access

The increased potential and effectiveness of Real-time Locating Systems (RTLSs) substantially influence their application spectrum. They are widely used, inter alia, in the industrial sector, healthcare, home care, and in logistic and security applications. The research aims to develop an analytical method to customize UWB-based RTLS, in order to improve their localization performance in terms of accuracy and precision. The analytical uncertainty model of Angle of Arrival (AoA) localization in a 3D indoor space, which is the foundation of the customization concept, is established in a working environment. Additionally, a suitable angular-based 3D localization algorithm is introduced. The paper investigates the following issues: the influence of the proposed correction vector on the localization accuracy; the impact of the system’s configuration and LS’s relative deployment on the localization precision distribution map. The advantages of the method are verified by comparing them with a reference commercial RTLS localization engine. The results of simulations and physical experiments prove the value of the proposed customization method. The research confirms that the analytical uncertainty model is the valid representation of RTLS’ localization uncertainty in terms of accuracy and precision and can be useful for its performance improvement. The research shows, that the Angle of Arrival localization in a 3D indoor space applying the simple angular-based localization algorithm and correction vector improves of localization accuracy and precision in a way that the system challenges the reference hardware advanced localization engine. Moreover, the research guides the deployment of location sensors to enhance the localization precision., Open access

Developing technologies associated with tracking human movement and behaviour enable new applications for competence assessments from training results of professionals, such as medical staff, sportsmen or emergency servicemen. This article considers a methodological approach to design a system for firefighter's skills and competence assessment. Assessed training features such as in-building behaviour and tasks execution are analysed based on data gathered with wireless Ultra-Wideband Real-Time Location System, UWB RTLS, and Inertial Measurement Unit, IMU. The assessment is based on the predefined required training tasks, the expert's expertise and results of the trainee's test. The Unity game engine is used for data processing and visualization. As the comprehensive final map of the trainee's skills, the spider diagram is applied and the single score method provides the conclusive statement. The proposed solution was verified experimentally in real environment.

Real-time Locating Systems (RTLSs) have the ability to precisely locate the position of things and people in real time. They are needed for security and emergency applications, but also for healthcare and home care appliances. The research aims for developing an analytical method to customize RTLSs, in order to improve localization performance in terms of precision. The proposed method is based on Angle of Arrival (AoA), a ranging technique and fingerprinting method along with an analytically defined uncertainty of AoA, and a localization uncertainty map. The presented solution includes three main concerns: geometry of indoor space, RTLS arrangement, and a statistical approach to localization precision of a pair of location sensors using an AoA signal. An evaluation of the implementation of the customized RTLS validates the analytical model of the fingerprinting map. The results of simulations and physical experiments verify the proposed method. The research confirms that the analytically established fingerprint map is the valid representation of RTLS’ performance in terms of precision. Furthermore, the research demonstrates an impact of workspace geometry and workspace layout onto the RTLS’ performance. Moreover, the studies show how the size and shape of a workspace and the placement of the calibration point affect the fingerprint map. Withal, the performance investigation defines the most effective arrangement of location sensors and its influence on localization precision. © 2016 by the authors; licensee MDPI, Basel, Switzerland.

The purpose of this research is to find an optimal number and configuration of readers in RFID based 3D Indoor Positioning System. The system applies a Hybrid Scene Analysis - Neural Network algorithm to estimate target's position with a desired accuracy. The system's accuracy and cost depend on a number of utilized readers and their arrangement. Readers' deployment is crucial for the localization accuracy too. The system optimization enhances the system cost-efficiency. The arrangement analysis was based on simulations and validated by physical experiment. The results of this research define a trade-off between a number of readers and their deployment and the system performance in terms of localization accuracy.

This paper presents the structure and operational principles of the Automatic Waterjet Positioning Vision System (PVS), which was implemented on the WaterJet (WJ) machine. Moreover, it presents an impact of calibration method on PVS performance. Two webcams mounted on the industrial WJ, form a basis of the system, and constitute its characteristics features. Together with the identification algorithm, the PVS was aimed for high accuracy positioning of the WJ machine. For this purpose, the two-step calibration procedure that uses a set of specific calibration color markers contrasted to the background, has been developed. The results analysis shows that, despite demanding environmental conditions, the proposed methodenables reliable high accuracy positioning of the WJ machine.