Search

This article discusses research that was conducted to optimise new electrical-stimulation technologies and to elucidate the effects of pre-slaughter dehydration of lambs. A change in lamb processing to a focus on eating quality has increased the uptake of new electrical technologies. Our research was aimed at understanding how carcase response to electrical stimulation is affected by genotype, pulse-width, current, and frequency and time of stimulation. Although seven post-dressing electrical stimulation systems have been installed in abattoirs across Australia and two prototype pre-dressing systems and an immobiliser have been installed at a major export abattoir, more installations are needed. An indicator of animal dehydration status was developed and used at two commercial abattoirs. This study showed that a large percentage of lambs are dehydrated at the time of slaughter, which represents a potential cost to industry of $5 million annually. Although several compounds for prevention of pre-slaughter dehydration in lambs were tested, none were effective. [ABSTRACT FROM AUTHOR]

Although there has been a decline in sheep numbers in Australia and New Zealand, both countries remain significant producers and exporters of sheep meat. The ongoing demand for more sustainable and ethical animal farming systems and practices requires sheep production industries to be both vigilant and responsive to consumer and the broader societal needs. Demonstration of continuous improvement in animal welfare is paramount and the welfare risks and challenges confronting Australasian sheep industries now and into the future are discussed. [ABSTRACT FROM AUTHOR]

Data from samples of longissmus lumborum (LL) and semimembranosus (SM) muscles from 391 lamb carcasses, which had been packaged in overwrap (OW) or high oxygen modified atmosphere packaging (MAP O2 ) systems and then subjected to simulated retail display, were used to estimate genetic variation for colour stability traits of lamb meat as a step in identifying a trait for genetic evaluation. Traits included the ratio of the reflectance of light at wavelengths of 630 nm and 580 nm (oxy/met) measured at a single time point at the end of the display period (day 3 under OW; day 8 under MAP O2 ) and the predicted time for oxy/met to reach a benchmark value. Under OW and MAP O2 , the measures of meat colour stability of the LL tended to be of moderate heritability (0.09-0.29), but for the SM were of low heritability (0-0.10). Improving retail colour stability of lamb loins through selection of genetically superior animals may be better based on measurement of oxy/met., (Crown Copyright © 2019. Published by Elsevier Ltd. All rights reserved.)

The colour of bloomed m. longissimus was measured 24h post slaughter for 8165 lamb carcasses produced over 5years across 8 sites in Australia. Intramuscular fat across a 2 to 8% range and shortloin fat weight were positively associated with meat lightness (L*), redness (a*), yellowness (b*), hue and chroma (P<0.01). Shortloin muscle weight was negatively associated with these meat colour parameters (P<0.01), although this was largely accounted for by correlated changes in intramuscular fat (P<0.01). The effect of sire breeding values for lamb weight, shortloin muscle depth and fat depth on loin L*, a*, b*, hue and chroma were small and varied between lambs of different sire type, dam breed and sex. Thus selection for lean meat yield will have neutral or positive effects on meat colour, while selection for increased intramuscular fat will make the bloomed colour of lamb meat lighter and redder., (Copyright © 2017. Published by Elsevier Ltd.)

The longissmus lumborum (LL) and semimembranosus (SM) muscles from 391 lamb carcasses, derived from various breed types, were used to investigate the effect of animal/muscle factors, packaging type [over-wrap (OW) or high oxygen modified atmosphere packaging (MAP O2 )] and duration of display on redness of meat during simulated retail display. Using statistical models the time required (in days) for redness to reach a threshold value of 3.5 (below this is unacceptable) was predicted. High levels of iron in the SM, but not LL, reduced the time for redness to reach 3.5 by 2-2.6days in MAP O2 and 0.5-0.8days in OW. The greater the proportion of Merino breed type, the shorter was the time for redness to reach the value of 3.5, an effect consistent across muscles and packaging types. In summary, breed type, packaging format, muscle and muscle iron levels had a significant impact on colour stability of sheep meat in oxygen-available packaging systems., (Copyright © 2017. Published by Elsevier Ltd.)

M. longissimus colour was measured from 8165 lambs at 24h post-mortem using a chromameter. The impact of production factors (site and year of production, slaughter group, sex, age and breed type) and muscle traits (hot carcass weight, pH24, isocitrate dehydrogenase (ICDH) activity, myoglobin, iron and zinc concentrations) on meat lightness (L*), redness (a*), yellowness (b*), hue and chroma were analysed. Greater differences in meat colour were seen between different slaughter groups and sites of production than across the range of any muscle traits. Of the muscle traits analysed, changes in pH24 had the greatest effect on meat a* (2.5 units), while myoglobin had the greatest effect on meat L* (2.9 units). The 3.1 L* unit darkening of meat with increasing lamb age (from 140 to 400days) was accounted for by increased myoglobin concentration. These results suggest that production factors are having substantial effects on lamb colour independent of known influencing muscle traits such as myoglobin concentration and pH., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The relationship between vitamin E supplementation rate and colour stability was investigated using 70 mixed sex 6-8 month old crossbred lambs. An initial group of 10 were slaughtered, while the remainder were fed a pellet ration containing either 30, 150, 275 or 400 IU vitamin E/kg ration or on green pasture for 56 days. After slaughter, carcases were halved; one side packed fresh (5 days) and the other in CO2 (21 days), both at 2°C. Five muscles were set for retail display for 96 h. The oxy/metmyoglobin ratio was measured every 12 h. Colour stability increased with increasing muscle vitamin E until an apparent maximum effect for vitamin E concentration (3.5-4.0mg α-tocopherol/kg tissue) was reached beyond which no further response was evident. This was reached within 3-4 weeks (275 IU treatment), and meat from these lambs should reach 60 h retail display with a satisfactory surface colour. This effect was most apparent in aerobic muscle types and meat aged post slaughter., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Pre-slaughter live weight, dressing percentage, and hot standard carcase weight (HCWT) from the 2007, 2008, 2009 and 2010 birth-years of the Information Nucleus Flock Lambs (n=7325) were analysed using linear mixed effects models. Increasing the sire breeding value for post-weaning weight (PWWT), and c-site eye muscle depth (PEMD), and reducing the sire breeding value for fat depth (PFAT) all had positive impacts on HCWT. The magnitude of the PWWT effect was greater in pure bred Merinos compared to Maternal and Terminal sired progeny. The improved HCWT resulting from increased PEMD was entirely due to its impact on improving dressing percentage, given that it had no impact on pre-slaughter live weight. There were marked differences between sire types and dam breeds, with pure-bred Merinos having lower pre-slaughter weight, reduced dressing percentage, and lower HCWT than progeny from Terminal and Maternal sired lambs or progeny from Maternal (1st cross) dams., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

This paper introduces a series of papers in the form of a special edition that reports phenotypic analyses done in parallel with genotypic analyses for the Australian Sheep Industry Cooperative Research Centre (Sheep CRC) using data generated from the information nucleus flock (INF). This has allowed new knowledge to be gained of the genetic, environment and management factors that impact on the carcase and eating quality, visual appeal, odour and health attributes of Australian lamb meat. The research described involved close collaboration with commercial partners across the supply chain in the sire breeding as well as the meat processing industries. This approach has enabled timely delivery and adoption of research results to industry in an unprecedented way and provides a good model for future research., (© 2013.)

This paper integrates the key industry findings from the twelve preceding papers in this special edition of Meat science. In so doing, various animal factors important for the quality of Australian lamb meat are highlighted for sensory, visual appeal and human health attributes. Intramuscular fat concentration (IMF) was found to be a key element of eating quality that interacts both positively and negatively with a range of other factors. Shear force, IMF, colour stability and docosahexaenoic acid (DHA) will likely respond to genetic selection whilst other omega-3 fatty acids require nutritional intervention. Australian lamb meat can generally be regarded as a good source of the minerals iron and zinc; and a source of omega 3 fatty acids when finished on green pasture. Breeding priorities for meat quality will likely depend on breed type with improvement of meat colour stability more important for the wool focused Merino breed and improvement of sensory quality for the terminal sire breeds., (Copyright © 2013. Published by Elsevier Ltd.)

The impact of selecting for lean meat yield using breeding values for increased eye muscle depth (PEMD) and decreased fat depth (PFAT) on the consumer acceptance of lamb meat was evaluated. Consumer sensory scores (tenderness, juiciness, flavour, odour, overall liking) were obtained for the longissimus lumborum (loin) and semimembranosus (topside) muscles of 1471 lambs. On average loin samples were more acceptable for consumers. Sensory scores increased with higher IMF levels, with lower shear force levels, and when animals were younger and less muscular. Increasing PEMD decreased tenderness, overall liking and flavour scores in both muscles, and decreasing PFAT reduced tenderness within the loin samples only. This negative impact of PEMD and PFAT is not solely driven through the phenotypic impact of IMF and shear force on sensory scores. Our results confirm the growing concerns that selecting for lean meat yield would reduce consumer eating quality, and highlight that careful monitoring of selection programmes is needed to maintain lamb eating quality., (© 2013.)

Selection for lean growth through Australian Sheep Breeding Values (ASBVs) for post weaning weight (PWWT), eye muscle depth (PEMD) and c-site fat depth (PFAT) raises concerns regarding declining intramuscular fat (IMF) levels. Reducing PFAT decreased IMF by 0.84% for Terminal sired lambs. PEMD decreased IMF by 0.18% across all sire types. Female lambs had higher IMF levels and this was unexplained by total carcass fatness. The negative phenotypic association between measures of muscling (shortloin muscle weight, eye muscle area) and IMF, and positive association between fatness and IMF, was consistent with other literature. Hot carcass weight increased IMF by 2.08% between 12 and 40 kg, reflective of development of IMF as lambs approach maturity. Selection objectives with low PFAT sires will reduce IMF, however the lower impact of PEMD and absence of a PWWT effect, will enable continued selection for lean growth without influencing IMF. Alternatively, the negative impact of PFAT could be off-set by inclusion of an IMF ASBV., (Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Spectrophotometric measures were used to determine the redness:browness (R630/R580) of 4238 lamb longissimus muscle after 3 days under simulated display. The results were analysed using linear mixed effects models. Environmental factors represented by effects such as kill group and site of production produced the greatest variation of up to 2.76 units in R630/R580. Isocitrate dehydrogenase activity, reflecting muscle oxidative capacity, reduced R630/R580 by 0.5 units. Selection for high muscling sires increased R630/R580 by 0.27 units, likely due to changes in muscle oxidative capacity. Lamb carcass weight also increased R630/R580 by 0.5 units. Analysis of genotypic factors influencing lamb size and growth rate such as sire type and dam breed further supported that increased growth rate improves meat R630/R580. Our findings suggest that breeding for increased growth rate and increased muscle weight could result in Australian lamb meat retaining its red colour for extended periods whilst on display., (© 2013.)

Genetic parameters were estimated for a range of meat quality traits recorded on Australian lamb meat. Data were collected from Merino and crossbred progeny of Merino, terminal and maternal meat breed sires of the Information Nucleus programme. Lambs born between 2007 and 2010 (n=8968) were slaughtered, these being the progeny of 372 sires and 5309 dams. Meat quality traits were found generally to be of moderate heritability (estimates between 0.15 and 0.30 for measures of meat tenderness, meat colour, polyunsaturated fat content, mineral content and muscle oxidative capacity), with notable exceptions of intramuscular fat (0.48), ultimate pH (0.08) and fresh meat colour a* (0.08) and b* (0.10) values. Genetic correlations between hot carcass weight and the meat quality traits were low. The genetic correlation between intramuscular fat and shear force was high (-0.62). Several measures of meat quality (fresh meat redness, retail meat redness, retail oxy/met value and iron content) appear to have potential for inclusion in meat sheep breeding objectives., (© 2013.)