Search

In all-optical Compton scattering driven by a multi-petawatt laser, it is critical to have accurate spatiotemporal synchronization between the ultrarelativistic electron bunch and the ultrahigh-intensity laser beam. Such a synchronization was realized by using two complementary optical setups. The first setup, used for the initial synchronization, recorded the spatial interferogram between the two femtosecond lasers used for a GeV electron beam production and an ultrahigh scattering laser beam. The second one, consisting of spatial and spectral interferometers, measured the time delay between the two laser beams in the range of 0–200 fs in real time. These monitoring systems played an essential role in conducting Compton scattering experiments.

High-power terahertz radiation was observed to be emitted from a gas jet irradiated by 100-terawatt-class laser pulses in the laser-wakefield acceleration of electrons. The emitted terahertz radiation was characterized in terms of its spectrum, polarization, and energy dependence on the accompanying electron bunch energy and charge under various gas target conditions. With a nitrogen target, more than 4 mJ of energy was produced at

We demonstrated sub-10 fs pulse generation by the post-compression of a 100 TW Ti:Sapphire laser to enhance the peak-power. In the post-compression, the laser spectrum was widely broadened by self-phase modulation in thin fused silica plate(s), and the induced spectral phase was compensated with a set of chirped mirrors. A spatial filter stage, consisting of two cylindrical lenses and a spherical lens, was employed to reduce the intensity modulation existing in the laser beam, which effectively suppressed intensity spikes induced by self-focusing. The laser beam was post-compressed from 23 fs to 9.7 fs after propagating through a 1.5 mm fused silica plate, resulting in the peak-power enhancement by a factor of 2.1.

This paper demonstrates the fabrication of radiation-resistant fiber Bragg grating (FBG) sensors using infrared femtosecond laser irradiation. FBG sensors were written inside acrylate-coated fluorine-doped single-mode specialty optical fibers. We detected the Bragg resonance at 1542 nm. By controlling the irradiation conditions, we improved the signal strength coming out from the FBG sensors. A significant reduction in the Bragg wavelength shift was detected in the fabricated FBG sensors for a radiation dose up to 105 gray, indicating excellent radiation resistance capabilities. We also characterized the temperature sensitivity of the radiation-resistant FBG sensors and detected outstanding performance.

A localized nanoparticle insertion scheme is developed to decouple electron injection from laser evolution in laser wakefield acceleration. Here we report the experimental realization of a controllable electron injection by the nanoparticle insertion method into a plasma medium, where the injection position is localized within the short range of 100 μm. Nanoparticles were generated by the laser ablation process of a copper blade target using a 3-ns 532-nm laser pulse with fluence above 100 J/cm2. The produced electron bunches with a beam charge above 300 pC and divergence of around 12 mrad show the injection probability over 90% after optimizing the ablation laser energy and the temporal delay between the ablation and the main laser pulses. Since this nanoparticle insertion method can avoid the disturbing effects of electron injection process on laser evolution, the stable high-charge injection method can provide a suitable electron injector for multi-GeV electron sources from low-density plasmas.

To realize the ultrahigh intensity over 10^23 W/cm^2, we carried out the wavefront correction and tight focusing of the CoReLS petawatt laser. By the wavefront correction and tight focusing of the CoReLS petawatt laser with two-stage adaptive optics systems and an f/1.1 (f=300 mm) off-axis parabolic mirror, we obtained a near-diffraction-limited focal spot. The measured peak intensity was (1.1±0.1)×10^23 W/cm2, the first realization of the laser intensity over 10^23 W/cm^2. With the PW laser of intensity over 10^23 W/cm^2, we plan to explore strong field QED phenomena and proton/ion acceleration dominated by the RPA mechanism.

The phase velocity of the wakefield of a laser wakefield accelerator can, theoretically, be manipulated by shaping the longitudinal plasma density profile, thus controlling the parameters of the generated electron beam. We present an experimental method where using a series of shaped longitudinal plasma density profiles we increased the mean electron peak energy more than 50%, from 175 ± 1 MeV to 262 ± 10 MeV and the maximum peak energy from 182 MeV to 363 MeV. The divergence follows closely the change of mean energy and decreases from 58.9 ± 0.45 mrad to 12.6 ± 1.2 mrad along the horizontal axis and from 35 ± 0.3 mrad to 8.3 ± 0.69 mrad along the vertical axis. Particle-in-cell simulations show that a ramp in a plasma density profile can affect the evolution of the wakefield, thus qualitatively confirming the experimental results. The presented method can increase the electron energy for a fixed laser power and at the same time offer an energy tunable source of electrons.

The absolute response of a real-time proton detector, composed of a microchannel plate (MCP) assembly, an imaging lens, and a charge-coupled device (CCD) camera, is calibrated for the spectral characterization of laser-accelerated protons, using a Thomson parabola spectrometer (TPS). A slotted CR-39 plate was used as an absolute particle-counting detector in the TPS, simultaneously with the MCP–CCD detector to obtain a calibration factor (count/proton). In order to obtain the calibration factor as a function of proton energy for a wide range of proton numbers, the absolute response was investigated for different operation parameters of the MCP–CCD detector, such as MCP voltage, phosphor voltage, and CCD gain. A theoretical calculation for the net response of the MCP was in good agreement with the calibrated response of the MCP–CCD detector, and allows us to extend the response to higher proton energies. The response varies in two orders of magnitude, showing an exponential increase with the MCP voltage and almost linear increase with the phosphor voltage and the CCD gain. The calibrated detector enabled characterization of a proton energy spectrum in a wide dynamic range of proton numbers. Moreover, two MCP assemblies having different structures of MCP, phosphor screen, and optical output window have been calibrated, and the difference in the absolute response was highlighted. The highly-sensitive detector operated with maximum values of the parameters enables measuring a single proton particle and evaluating an absolute spectrum at high proton energies in a single laser shot. The absolute calibrations can be applied for the spectral measurement of protons using different operating voltages and gains for optimized response in a large range of proton energy and number.

The acceleration of super-heavy ions (SHIs) from plasmas driven by ultrashort (tens of femtoseconds) laser pulses is a challenging topic waiting for breakthrough. The detecting and controlling of the ionization process, and the adoption of the optimal acceleration scheme are crucial for the generation of highly energetic SHIs. Here, we report the experimental results on the generation of deeply ionized super-heavy ions (Au) with unprecedented energy of 1.2 GeV utilizing ultrashort laser pulses (22 fs) at the intensity of 10^22 W/cm2. A novel self-calibrated diagnostic method was developed to acquire the absolute energy spectra and charge state distributions of Au ions abundant at the charge state of 51+ and reaching up to 61+. The measured charge state distributions supported by 2D particle-in-cell simulations serves as an additional tool to inspect the ionization dynamics associated with SHI acceleration, revealing that the laser intensity is the crucial parameter for the acceleration of Au ions over the pulse duration. The use of double-layer targets results in a prolongation of the acceleration time without sacrificing the strength of acceleration field, which is highly favorable for the generation of high-energy super heavy ions.

Laser wakefield electron acceleration (LWFA) is an emerging technology for the next generation of electron accelerators. As intense laser technology has rapidly developed, LWFA has overcome its limitations and has proven its possibilities to facilitate compact high-energy electron beams. Since high-power lasers reach peak power beyond petawatts (PW), LWFA has a new chance to explore the multi-GeV energy regime. In this article, we review the recent development of multi-GeV electron acceleration with PW lasers and discuss the limitations and perspectives of the LWFA with high-power lasers.

We analyzed and corrected the wavefront distortion induced during the post-compression of a 100-TW Ti:Sapphire laser and achieved the intensity enhancement. In the post-compression, the spectral broadening of the laser was obtained by propagating through three 0.5 mm-thick fused silica plates and the laser pulse duration was post-compressed from 24 fs to 11 fs using a set of chirped mirrors. We measured the wavefront aberrations due to the intensity-dependent nonlinear process during the post-compression of femtosecond high-power laser pulses. By compensating for the wavefront aberrations with an adaptive optics system, the Strehl ratio of the post-compressed beam was improved from 0.37 to 0.52 and the focused intensity of the post-compressed beam could be enhanced by a factor of 1.5, while the enhancement without the wavefront correction was only a factor of 1.1 in spite of the peak-power enhancement by a factor of 1.8.

Angular dispersion observed in a nanosecond optical parametric chirped-pulse amplification (ns-OPCPA) amplifier adopted in the frontend of a multi-PW laser was analyzed. The theory on the angular dispersion, extended by including the wavefront rotation and the pulse front tilt of a strongly chirped laser pulse, revealed that the wavefront rotation is a major contributor to the angular dispersion, as compared to the pulse front tilt, in a ns-OPCPA amplifier. It was also shown that the wavefront rotation could be introduced by the phase mismatch and the noncollinear propagation angle in the noncollinear ns-OPCPA amplifier. The theoretical prediction was experimentally verified by measuring the angular dispersion of the ns-OPCPA frontend installed in the 20-fs, 4-PW Ti:Sapphire laser. We emphasize the importance of the proper characterization and control of the angular dispersion in the ns-OPCPA amplifier since the focus intensity of an ultrahigh power laser could be significantly reduced due to the spatiotemporal effect even for small induced angular dispersion.

We demonstrate efficient multicycle terahertz pulse generation at 14.6 THz from large-area lithium niobate crystals by using high-energy (up to 2 J) femtosecond Ti:sapphire laser pulses. Such terahertz radiation is produced by phase-matched optical rectification in lithium niobate. Experimentally, we achieve maximal terahertz energy of 0.71 mJ with conversion efficiency of $\sim$0.04%. We also find that the effective interaction length for optimal terahertz conversion is fundamentally limited by terahertz absorption, laser pulse stretching by material dispersion, and terahertz-induced nonlinear cascading effects on the driving laser pulse., Comment: 4 figures

This paper demonstrates the design and development of a synchronized femtosecond laser pulse switching system and its applications in nano-patterning of transparent materials. Due to synchronization, we are able to control the location of each irradiated laser pulse in any kind of substrate. The control over the scanning speed and scanning step of the laser beam enables us to pattern periodic micro/nano-metric holes, voids, and/or lines in various materials. Using the synchronized laser system, we pattern synchronized nano-holes on the surface of and inside various transparent materials including fused silica glass and polymethyl methacrylate to replicate any image or pattern on the surface of or inside (transparent) materials. We also investigate the application areas of the proposed synchronized femtosecond laser pulse switching system in a diverse field of science and technology, especially in optical memory, color marking, and synchronized micro/nano-scale patterning of materials.

The phase velocity of the wakefield of a laser wakefield accelerator can, theoretically, be manipulated by shaping the longitudinal plasma density profile, thus controlling the parameters of the generated electron beam. We present an experimental method where using a series of shaped longitudinal plasma density profiles we increased the mean electron peak energy more than 50%, from 175 ± 1 MeV to 262 ± 10 MeV and the maximum peak energy from 182 MeV to 363 MeV. The divergence follows closely the change of mean energy and decreases from 58.9 ± 0.45 mrad to 12.6 ± 1.2 mrad along the horizontal axis and from 35 ± 0.3 mrad to 8.3 ± 0.69 mrad along the vertical axis. Particle-in-cell simulations show that a ramp in a plasma density profile can affect the evolution of the wakefield, thus qualitatively confirming the experimental results. The presented method can increase the electron energy for a fixed laser power and at the same time offer an energy tunable source of electrons.

We demonstrate 0.71-mJ multicycle terahertz pulse generation at 14.8 THz from a bulk lithium niobate crystal with 80 TW femtosecond laser pumping. This terahertz radiation arises from large-area, phase-matched, optical rectification in lithium niobate.

With the recent advances in ultrahigh intensity lasers, exotic astrophysical phenomena can be investigated in laboratory environments. Collisionless shock in a plasma, prevalent in astrophysical events, is produced when a strong electric or electromagnetic force induces a shock structure in a time scale shorter than the collision time of charged particles. A near-critical-density (NCD) plasma, generated with an intense femtosecond laser, can be utilized to excite a collisionless shock due to its efficient and rapid energy absorption. We present electrostatic shock acceleration (ESA) in experiments performed with a high-density helium gas jet, containing a small fraction of hydrogen, irradiated with a 30 fs, petawatt laser. The onset of ESA exhibited a strong dependence on plasma density, consistent with the result of particle-in-cell simulations on relativistic plasma dynamics. The mass-dependent ESA in the NCD plasma, confirmed by the preferential reflection of only protons with two times the shock velocity, opens a new possibility of selective acceleration of ions by electrostatic shock.

The generation of ultrahigh intensity laser pulses was investigated by tightly focusing a wavefront-corrected multi-petawatt Ti:sapphire laser. For the wavefront correction of the PW laser, two stages of deformable mirrors were employed. The multi-PW laser beam was tightly focused by an f/1.6 off-axis parabolic mirror and the focal spot profile was measured. After the wavefront correction, the Strehl ratio was about 0.4, and the spot size in full width at half maximum was 1.5×1.8 μm

The single-shot spatiotemporal characterization of an ultrahigh intensity laser pulse was performed using a multispectral wavefront sensor. For the measurement of the spatio-spectral electric field, a femtosecond laser pulse was spectrally modulated and separated by a Fabry-Perot etalon coupled with a grating pair, and its spatio-spectral electric field was measured with a wavefront sensor. The spatiotemporal electric field was reconstructed from the measured spatio-spectral electric field of a multi-PW laser pulse. We found that the spatiotemporal distortion could reduce the focused laser intensity by 15%, compared to the case of a diffraction-limited and transform-limited laser pulse.

High-intensity lasers are critical for the exploration of strong field quantum electrodynamics. We report here a demonstration of laser intensity exceeding 1 0 23 W / c m 2 with the CoReLS petawatt (PW) laser. After wavefront correction and tight focusing with a two-stage adaptive optical system and an f/1.1 ( f = 300 m m ) off-axis parabolic mirror, we obtained near diffraction-limited focusing with a spot size of 1.1 µm (FWHM). From the measurement of 80 consecutive laser shots at 0.1 Hz, we achieved a peak intensity of ( 1.1 ± 0.2 ) × 1 0 23 W / c m 2 , verifying the applicability of the ultrahigh intensity PW laser for ultrahigh intensity laser–matter interactions. From the statistical analysis of the PW laser shots, we identified that the intensity fluctuation originated from air turbulence in the laser beam path and beam pointing. Our achievement could accelerate the study of strong field quantum electrodynamics by enabling exploration of nonlinear Compton scattering and Breit–Wheeler pair production.

We report on fabricating high-fill-factor plano-convex spherical and square micro-lens arrays on fused silica glass surface by using a CO2 laser-assisted reshaping technique. Initially, periodic micro-pillars are encoded on glass surfaces by means of a femtosecond laser beam, afterwards, the micro-pillars are polished several times by irradiating a CO2 laser beam on top of the micro-pillars. Consequently, a spherical micro-lens array with micro-lens size of 50 μm × 50 μm and a square micro-lens array with micro-lens size of 100 μm × 100 μm are formed on the surface of the fused silica glass. We also study the intensity distribution of light passing through the glass sample engraved with a spherical micro-lens array. The simulation result shows that the focal length of the spherical micro-lens array is 35 μm. Furthermore, we investigate the optical properties of glass samples with engraved micro-lens arrays. The proposed CO2-laser-based reshaping technique is simple and fast and shows promises for fabricating arrays of smooth micro-lenses in various transparent materials.

We present a proof of principle for onsite calibration of a radiochromic film (EBT3) using CR-39 as an absolute proton-counting detector and laser-accelerated protons as a calibration source. A special detector assembly composed of aluminum range filters, an EBT3 film, and a CR-39 detector is used to expose the EBT3 film with protons in an energy range of 3.65 MeV-5.85 MeV. In our design, the proton beam is divided into small beamlets and their projection images are taken on the EBT3 film and the CR-39 detector by maintaining a certain distance between the two detectors. Owing to the geometrical factor of the configuration and scattering inside the EBT3, the areal number density of protons was kept below the saturation level of the CR-39 detector. We also present a method to relate the number of protons detected on the CR-39 in a narrow energy range to protons with a broad energy spectrum that contribute to the dose deposited in the EBT3 film. The energy spectrum of protons emitted along the target normal direction is simultaneously measured using another CR-39 detector installed in a Thomson parabola spectrometer. The calibration curves for the EBT3 film were obtained in the optical density range of 0.01-0.25 for low dose values of 0.1 Gy-3.0 Gy. Our results are in good agreement with the calibrations of the EBT3 film that are traditionally carried out using conventional accelerators. The method presented here can be further extended for onsite calibration of radiochromic films of other types and for a higher range of dose values.

We present a highly efficient double plasma mirror (DPM) that provides ultrahigh-contrast multi-petawatt (PW) laser pulses with a temporal contrast ratio reaching 1 0 17 up to 160 ps and 1 0 12 up to 2 ps before the main pulse. The high reflectivity of 70%, along with the high-contrast enhancement factor of 700,000, was achieved from the DPM installed after the final stage of a 4 PW Ti:sapphire laser. The 4 PW laser was equipped with cross-polarized wave generation and optical parametric chirped-pulse amplification stages for initial high-contrast operation. The DPM operation was undertaken with conditions that did not modify the spatiotemporal profiles of incident multi-PW laser pulses. This highly efficient DPM with the high-contrast enhancement promises the utilization of multiple PMs as a practical rear end for upcoming tens of petawatt lasers to achieve ultrahigh temporal contrast.

Nanoparticles in a laser-produced plasma can act as a sensitive control knob for inducing highly localized electron injection. The benefits of nanoparticles for laser-plasma electron accelerators have not been examined, though, due to complex effects on the plasma fluid and difficulties in getting nanoparticles into the plasma. Here the authors demonstrate nanoparticle-assisted laser wakefield acceleration by succeeding at incorporating nanoparticles into the plasma medium, obtaining prominent enhancement of beam quality by controlling the electron injection process. This work could promote applications of nanoscience to laser-plasma accelerators, and open a path to $a\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}s\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}c\phantom{\rule{0}{0ex}}e$.

We developed a two-stage optical parametric chirped-pulse amplification (OPCPA) amplifier with a double-sliced pump pulse. To utilize a single-longitudinal laser pulse with an 8-ns duration and a 532-nm central wavelength as a high-energy pump source efficiently, two 2-ns quasi-rectangular pump pulses were generated by double-slicing the green pulse with two Pockels cells. The energy and spectral width of the amplified laser pulse with an 820-nm central wavelength were maximized by optimizing the phase matching conditions in the OPCPA amplifier via a 3-D simulation. The amplified laser pulse had a broad bandwidth of 120 nm (FWHM) and a high energy of 75 mJ. And the amplified pulse had an energy stability of 2.14% (RMS) on account of the temporal jittering between the single-mode green pulse and the Pockels cells while the single-mode green pump laser had an energy stability of 1.1% (RMS).

International audience; Generation of high-quality electron beams from laser wakefield acceleration requires optimization of initial experimental parameters. We present here the dependence of accelerated electron beams on the temporal profile of a driving PW laser, the density, and length of an interacting medium. We have optimized the initial parameters to obtain 2.8 GeV quasi-monoenergetic electrons which can be applied further to the development of compact electron accelerators and radiations sources.

Laser-driven proton/ion acceleration is a rapidly developing research field attractive for both fundamental physics and applications such as hadron therapy, radiography, inertial confinement fusion, and nuclear/particle physics. Laser-driven proton/ion beams, compared to those obtained in conventional accelerators, have outstanding features such as low emittance, small source size, ultra-short duration and huge acceleration gradient of ∼1 MeV μm−1. We report proton acceleration from ultrathin polymer targets irradiated with linearly polarized, 30-fs, 1-PW Ti:sapphire laser pulses. A maximum proton energy of 45 MeV with a broad and modulated profile was obtained when a 10-nm-thick target was irradiated at a laser intensity of 3.3 × 1020 W/cm2. The transition from slow (I1/2) to fast scaling (I) of maximum proton energy with respect to laser intensity I was observed and explained by the hybrid acceleration mechanism including target normal sheath acceleration and radiation pressure acceleration in the acceleration stage and Coulomb-explosion-assisted free expansion in the post acceleration stage.

This paper reports the fabrication of various micro-lensed single-mode optical fibers through the use of an enhanced peak power $CO_2$ laser beam. The end faces of the optical fibers are exposed to the $CO_2$ laser beam to form convex, concave, and conical shape optical fiber tips. Peak power of the $CO_2$ laser beam was varied from 0.8 W to 1.5 W depending on the shape of the optical fiber tip. We also discover the dependence of the angle of the optical fiber tip on the rotation angle and the number of $CO_2$ laser irradiations. The angle shows an increasing trend with both these parameters. We achieve a wide range of lenticular fibers with end face angle varying from $4.47^{\circ}$ to $8.13^{\circ}$ . Furthermore, we investigate the emission pattern of light from the developed micro-lensed fibers. The proposed $CO_2$ laser based optical fiber reshaping technique shows great consistency, and thus is suitable for commercial applications.

We report the experimental generation of highly energetic carbon ions up to 48 MeV per nucleon by shooting double-layer targets composed of well-controlled slightly underdense plasma and ultrathin foils with ultraintense femtosecond laser pulses. Particle-in-cell simulations reveal that carbon ions are ejected from the ultrathin foils due to radiation pressure and then accelerated in an enhanced sheath field established by the superponderomotive electron flow. Such a cascaded acceleration is especially suited for heavy ion acceleration with femtosecond laser pulses. The breakthrough of heavy ion energy up to many tens of $\mathrm{MeV}/\mathrm{u}$ at a high repetition rate would be able to trigger significant advances in nuclear physics, high energy density physics, and medical physics.

A 20 fs, 4 PW Ti:sapphire laser with a repetition rate of 0.1 Hz was developed and its performance has been tested in laser-driven charged particle acceleration.

The experimental results that demonstrate the changes in the characteristics of laser-driven proton beams are presented along with numerical simulations, as the relativistic laser profile changes from Gaussian to Laguerre-Gaussian.

A high energy pulse with the energy of 3.5 J was spectrally broadened by a supercontinuum generation and it was recompressed from 31 fs to 14.5 fs by the dispersion compensation.