Search

Electromagnetic wave (EMW)-absorbing materials, manufactured with composites of magnetic particles, are essential for maintaining a high complex permeability and modulated permittivity for impedance matching. However, commonly available EMW-absorbing materials are unsatisfactory owing to their low complex permeability in the high-frequency band. Herein, we report a thin, flexible EMW-absorbing membrane comprising shape-modulated FeCo nanobelts/boron nitride nanoparticles, which enables enhanced complex permeability in the S, C, and X bands (2-12 GHz). The boron nitride nanoparticles that are introduced to the FeCo nanobelts demonstrate control of the complex permittivity, leading to an effective impedance matching close to 1, consequently resulting in a high reflection loss value of -42.2 dB at 12.0 GHz with only 1.6 mm thickness. In addition, the incorporation of boron nitride nanoparticles improves the thermal conductivity for the heat dissipation of the absorbed electromagnetic wave energy. Overall, the comprehensive study of nanomaterial preparation and shape modulation technologies can lead to the fabrication of an excellent EMW-absorbing flexible composite membrane.

The performance of MME generators was investigated under magnetic flux concentrators (MFC) and confirms the MFC with higher permeability focuses more magnetic flux to the MME generator, which can have incited an added harvested electrical power.

The purpose of this review is to summarize studies that investigate blood and the main components of fetal bovine serum (FBS) in vertebrates, including major livestock, and review the current research on commercializing cultured meat. Detailed research on FBS is still lacking; however, some studies have shown that FBS consists of proteins, carbohydrates, growth factors, cytokines, fats, vitamins, minerals, hormones, non-protein nitrogen, and inorganic compounds. However, there are few studies on how the composition of FBS differs from blood or serum composition in adult animals, which is probably one of the main reasons for not successfully replacing FBS. Moreover, recent studies on the development of FBS replacers and serum-free media have shown that it is difficult to conclude whether FBS has been completely replaced or serum-free media have been developed successfully. Our review of the industrialization of cultured meat reveals that many basic studies on the development of cultured meat have been conducted, but it is assumed that the study to reduce or replace ingredients derived from fetuses such as FBS has not yet been actively developed. Therefore, developing inexpensive and edible media is necessary for the successful industrialization of cultured meat.

Micron-scale powdered amorphous soft magnetic materials are highly pursued for miniaturised and high-efficiency power inductors working at high frequencies due to their excellent soft magnetic prop...

Herein, we introduce novel 1-dimensional nano-chained FeCo particles with unusually-high permeability prepared by a highly-productive thermal plasma synthesis and demonstrate an electromagnetic wave absorber with exceptionally low reflection loss in the high-frequency regime (1–26 GHz). During the thermal plasma synthesis, spherical FeCo nanoparticles are first formed through the nucleation and growth processes; then, the high temperature zone of the thermal plasma accelerates the diffusion of constituent elements, leading to surface-consolidation between the particles at the moment of collision, and 1-dimensional nano-chained particles are successfully fabricated without the need for templates or a complex directional growth process. Systematic control over the composition and magnetic properties of FexCo1−x nano-chained particles also has been accomplished by changing the mixing ratio of the Fe-to-Co precursors, i.e. from 7 : 3 to 3 : 7, leading to a remarkably high saturation magnetization of 151–227 emu g−1. In addition, a precisely-controlled and uniform surface SiO2 coating on the FeCo nano-chained particles was found to effectively modulate complex permittivity. Consequently, a composite electromagnetic wave absorber comprising Fe0.6Co0.4 nano-chained particles with 2.00 nm-thick SiO2 surface insulation exhibits dramatically intensified permeability, thereby improving electromagnetic absorption performance with the lowest reflection loss of −43.49 dB and −10 dB (90% absorbance) bandwidth of 9.28 GHz, with a minimum thickness of 0.85 mm.

Axial-flux permanent-magnet synchronous motors (AFPMSMs) have a higher torque density than radial-flux permanent-magnet synchronous motors (RFPMSMs); therefore, AFPMSMs are widely used in high-power and high-efficiency motors. However, in the case of AFPMSMs, three-dimensional production is limited, less mass production is available, and the production unit cost is high because the shape of the motor is implemented by rolling the amorphous electrical steel sheet or molding the soft magnetic composite (SMC) to manufacture the motor. Therefore, in this paper, a 3D-printed AFPMSM is proposed, which takes high torque density including the AFPMSM shoe to mold existing SMC into shape when producing the AFPMSM using 3D printing. Further, hybrid AFPMSM, which is made by heeding, is proposed. To reduce core loss with 3D-printed AFPMSM, the core loss of the proposed hybrid AFPMSM was compared to that of the target RFPMSM in this study. The 3D-printed AFPMSM showed a 48% increase in core loss compared to the target motor. However, the proposed hybrid AFPMSM reduced the ratio of the electrical steel sheet by more than 25% compared to 3D-printed AFPMSM. The validity of the proposed model was verified using the finite element method.

Gut microbiota comprise microorganisms residing in the gastrointestinal tract. Some of these microbiota are implicated in the progression of colorectal cancer (CRC). Here, we highlight studies on the effects of meat intake and fermented foods on characteristics of gut microbiota that can influence colitis-associated factors underlying CRC. Gut microbiota can influence the development and progression of CRC, through influencing factors such as secretion of toxins; enzymes for activating carcinogenesis (including β-glucuronidase, β-glucosidase, azoreductase, nitroreductase, and alcohol dehydrogenase); hydrogen sulfide generation; generation of reactive oxygen species and inflammation; secondary bile salt transformation; and products of protein fermentation. Additionally, some studies that the composition of gut microbiota (probiotics) or prebiotics plays an important role in the production of short chain fatty acids, inactivation enzymes for carcinogenesis, antioxidant activities, and inhibition of pathogen colonization. In this review, we discuss various explanatory mechanisms of the relationship between the multifactorial role of the gut microbiota and the development of CRC. Moreover, this review provides fundamental information on dietary fermented food and the gut microbiota, which is helpful for healthy people and those with CRC alike.

Background: Recent studies have proposed that clinical and immunological differences exist between mono- and poly-sensitized subjects with allergic diseases, and poly-sensitization was related to multimorbidity of allergic diseases among children and adolescents. Objective: We compared the clinical characteristics and multimorbidity of allergic diseases between adult rhinitis patients mono- and poly-sensitized to common aeroallergens using a retrospective cross-sectional study for tertiary care subjects. Methods: The medical records of 1,615 patients who were clinically diagnosed with rhinitis by an otolaryngologist and evaluated with skin prick tests were reviewed. The severity of the rhinitis symptoms, comorbidities (asthma, conjunctivitis, and eczema), family history of allergic diseases, and the results of skin prick tests were evaluated. Results: There were 392 patients with mono-sensitized rhinitis (mono-sR), 325 with poly-sensitized rhinitis (poly-sR), and 898 with non-sensitized rhinitis (non-sR). Comorbid conjunctivitis and eczema were most common in poly-sR, followed by mono-sR, and least common in non-sR patients. The age at onset of rhinitis was clearly different between adult patients with non-sR and mono-/poly-sR, but not between patients with mono-sR and poly-sR. However, the age at onset of rhinitis was much younger in non-sR and mono-sR patients with conjunctivitis or eczema than those without such comorbidities. Conclusion: Thefrequency of comorbid conjunctivitis and eczema in adult rhinitis patients differed by a quantitative trait of immunoglobulin E sensitization. Depending on the multimorbidity of allergic diseases, onset age of rhinitis seems to be different in adult rhinitis patients.

The power density limits of complementary metal–oxide–semiconductor (CMOS) technology could be overcome by moving from a binary to a ternary logic system. However, ternary devices are typically based on multi-threshold voltage schemes, which make the development of power-scalable and mass-producible ternary device platforms challenging. Here we report a wafer-scale and energy-efficient ternary CMOS technology. Our approach is based on a single threshold voltage and relies on a third voltage state created using an off-state constant current that originates from quantum-mechanical band-to-band tunnelling. This constant current can be scaled down to a sub-picoampere level under a low applied voltage of 0.5 V. Analysis of a ternary CMOS inverter illustrates the variation tolerance of the third intermediate output voltage state, and its symmetric in–out voltage-transfer characteristics allow integrated circuits with ternary logic and memory latch-cell functions to be demonstrated. Quantum-mechanical band-to-band tunnelling can be used to create an energy-efficient ternary logic technology that can be fabricated on the wafer scale using complementary metal–oxide–semiconductor (CMOS) processes.

Patient education is important for successful management of atopic dermatitis; however, due to limited time and resources, patient education remains insufficient. This study aimed to investigate the current state of education provided by Korean dermatologists, pediatric allergists, and allergists to patients with atopic dermatitis. A questionnaire survey consisting of items regarding educational programs for patients with atopic dermatitis was conducted via e-mail. In total, 153 participants responded to the questionnaires, and 26.8% indicated that they have had separate educational programs. The workforce involved in the educational program included nurses, residents or fellows, dieticians, pharmacists, and clinical psychologists. Most education protocols addressed the characteristics and natural course of atopic dermatitis and environmental management. Overall, 96.7% of the participants replied that an additional charge is needed for education; moreover, additional assistance from an academic society or association, in the form of medical staff, organized data, and advertisement, is required to develop and provide a well-structured educational program. A standardized education protocol will effectively provide appropriate education for patients with atopic dermatitis. Arrangement of education fees, covered by the National Health Insurance Service, will lead to the establishment of a structured educational program and participation of an additional medical workforce.

In spite of the high specific capacity and energy density of Li–S batteries based on low-cost sulfur as the active material, their practical use has not yet been realized due to the undesirable formation of soluble polysulfides (PS) during electrochemical cycles and their shuttling effect. In order to minimize this serious issue caused by the active material dissolution, transition metal compounds such as oxides, nitrides, and sulfides have alternatively been used to capture the PS and also to provide electron pathways in the S electrode. However, high-performance additive materials having both high affinity to PS and high electronic conductivity have not been developed thus far. Herein, we report the preparation and application of a new additive material—titanium(III) sulfide (Ti2S3) nanoparticles covered with multicomponent (Ti–S–O) oxide (MO–Ti2S3), which can be synthesized on a large scale using an inductively-coupled thermal plasma synthesis method followed by a simple surface oxidation treatment. MO–Ti2S3 shows much higher PS affinity than other titanium compounds and electronic conductivity that is comparable to that of carbon black. Furthermore, MO–Ti2S3 shows much higher resistance to heat and oxidation while having charge–discharge stability when compared with TiS2. Finally, we show that the cyclability and specific capacity of the Li–S battery can be significantly enhanced by incorporating MO–Ti2S3 in the cathode when compared to utilizing C species.

Carcinogens such as heterocyclic amine (HCA), produced during meat cooking, pose a risk of digestive and reproductive cancers in humans. Nevertheless, the exact mechanisms for HCA formation in meat and the control of HCA formation are not known. In this review, we provide an overview of the main cause of HCA formation in cooked meat, fundamental data on natural materials to inhibit HCA carcinogenicity, and methods to analyze HCA in cooked meat. Related past studies has shown that natural substances contain various components that act as antioxidants, and these antioxidants can prevent HCA and mutagenic factors. Free radicals and DNA adducts produced by HCA metabolism have carcinogenic properties. Antioxidants have been found to inhibit oxidative stress caused by free radicals and DNA adducts. Therefore, we can be hypothesized that various natural materials can inhibit HCA carcinogens and mutagens.

Herein, we introduce novel 1-dimensional nano-chained FeCo particles with unusually-high permeability prepared by a highly-productive thermal plasma synthesis and demonstrate an electromagnetic wave absorber with exceptionally low reflection loss in the high-frequency regime (1-26 GHz). During the thermal plasma synthesis, spherical FeCo nanoparticles are first formed through the nucleation and growth processes; then, the high temperature zone of the thermal plasma accelerates the diffusion of constituent elements, leading to surface-consolidation between the particles at the moment of collision, and 1-dimensional nano-chained particles are successfully fabricated without the need for templates or a complex directional growth process. Systematic control over the composition and magnetic properties of FexCo1-x nano-chained particles also has been accomplished by changing the mixing ratio of the Fe-to-Co precursors, i.e. from 7 : 3 to 3 : 7, leading to a remarkably high saturation magnetization of 151-227 emu g-1. In addition, a precisely-controlled and uniform surface SiO2 coating on the FeCo nano-chained particles was found to effectively modulate complex permittivity. Consequently, a composite electromagnetic wave absorber comprising Fe0.6Co0.4 nano-chained particles with 2.00 nm-thick SiO2 surface insulation exhibits dramatically intensified permeability, thereby improving electromagnetic absorption performance with the lowest reflection loss of -43.49 dB and -10 dB (90% absorbance) bandwidth of 9.28 GHz, with a minimum thickness of 0.85 mm.

Axial-flux permanent magnet synchronous motors (AFPMSMs) have higher torque densities than the conventional radial-flux permanent magnet synchronous motors (RFPMSMs). However, RFPMSMs have the advantage of lower eddy current losses in the core, owing to the use of electrical steel plates that can be stacked. Therefore, most studies on reducing the eddy current losses of the extant AFPMSMs cores have been focused on reducing the eddy current loss by using a soft magnetic composite (SMC) material or rolling an amorphous electrical steel plate. The method, which is proposed for reducing the eddy current loss of AFPMSMs in this paper, utilizes 3D printing technology to insert a 3D-printed SMC core into the stator shape of a motor that generates a large amount of eddy current; it also inserts air insulation to produce the same effect as that produced by the extant RFPMSM stacking method. The eddy current loss of a stator insulation structure using the 3D-printed SMC core is compared to that of an AFPMSM using the extant SMC core, and the validity of the proposed shape is verified through finite element analysis.

Improving the environmental stability of conjugated polymers remains a fundamental challenge that limits their widespread adoption and commercial application in electronic and photonic devices. Although paraffin can have excellent barrier properties against moisture in ambient air, the use of conjugated polymer/paraffin blends to fabricate organic field-effect transistors (OFETs) with high environmental stability has not been attempted. Here, we demonstrate that conjugated polymer/paraffin blends can greatly enhance the environmental stability of OFETs. Compared to conventional systems such as poly(3-hexylthiophene) (P3HT)/polystyrene and P3HT/polydimethylsiloxane blends, P3HT/paraffin blends exhibit superior environmental stability after 30 days of exposure to the ambient atmosphere. Furthermore, the conjugated polymer/paraffin blends provide stable electronic properties under severe mechanical deformation [a strain (e) of ∼150%], overcoming a critical challenge arising from the use of fragile crystalline conjugated polymer films for flexible and stretchable electronic devices. In comparison with a conventional spin-coating method, a shear-coating technique provides enhanced molecular ordering and alignment, resulting in improved charge carrier mobility in the blend film OFETs. In particular, shearing in the evaporation regime improves the molecular ordering and alignment of the blend films more than shearing in the Landau–Levich regime. Interestingly, the environmental stability of the sheared blend films varies depending on the shear speed. Specifically, OFETs based on blend films sheared at 0.5 and 6.0–10.0 mm s−1 exhibit excellent environmental stability, maintaining 80% of their initial mobility after 30 days of exposure to air. In contrast, the environmental stability of the OFETs decreases considerably when the blend films are sheared at 1.0–4.0 mm s−1; the mobility decreases to as low as ∼20% of the initial value.