Search

Achieving efficient and large-area organic solar modules via non-halogenated solution processing is vital for the commercialization yet challenging. The primary hurdle is the conservation of the ideal film-formation kinetics and bulk-heterojunction (BHJ) morphology of large-area organic solar cells (OSCs). A cutting-edge non-fullerene acceptor (NFA), Y6, shows efficient power conversion efficiencies (PCEs) when processed with toxic halogenated solvents, but exhibits poor solubility in non-halogenated solvents, resulting in suboptimal morphology. Therefore, in this study, the impact of modifying the inner and outer side-chains of Y6 on OSC performance is investigated. The study reveals that blending a polymer donor, PM6, with one of the modified NFAs, namely N-HD, achieved an impressive PCE of 18.3% on a small-area OSC. This modified NFA displays improved solubility in o-xylene at room temperature, which facilitated the formation of a favorable BHJ morphology. A large-area (55 cm 2 ) sub-module delivered an impressive PCE of 12.2% based on N-HD using o-xylene under ambient conditions. These findings underscore the significant impact of the modified Y6 derivatives on structural arrangements and film processing over a large-area module at room temperature. Consequently, these results are poised to deepen the comprehension of the scaling challenges encountered in OSCs and may contribute to their commercialization., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

The advancement of non-fullerene acceptors with crescent-shaped geometry has led to the need for polymer donor improvements. Additionally, there is potential to enhance the photovoltaic parameters in high-efficiency organic solar cells (OSCs). The random copolymerization method is a straightforward and effective strategy to further optimize photoactive morphology and enhance device performance. However, finding a suitable third component in terpolymers remains a crucial challenge. In this study, a series of terpolymer donors (PTF3, PTF5, PTF10, PTF20, and PTF50) is synthesized by introducing varying amounts of the trifluoromethyl-substituted unit (CF3) into the PM6 polymer backbone. Even subtle changes in the CF3 content can significantly enhance all the photovoltaic parameters due to the optimized energy levels, molecular aggregation/miscibility, and bulk-heterojunction morphology of the photoactive materials. Thus, the best binary OSC based on the PTF5:Y6-BO achieves an outstanding power conversion efficiency (PCE) of 18.2% in the unit cell and a PCE of 11.6% in the sub-module device (aperture size: 54.45 cm 2 ), when using halogen-free solvent o-xylene. This work showcases the remarkable potential of the easily accessible CF3 unit as a key constituent in the construction of terpolymer donors in high-performance OSCs., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

The data provided in this data set is the study of organic-inorganic hybrid perovskite solar cells fabricated through incorporating the small amounts of ammonium halide NH 4 X (X = F, Cl, Br, I) additives into a CH 3 NH 3 PbI 3 (MAPbI 3 ) perovskite solution and is published as "High-Performance CH 3 NH 3 PbI 3 Inverted Planar Perovskite Solar Cells via Ammonium Halide Additives", available in Journal of Industrial and Engineering Chemistry [1]. A compact and uniform perovskite absorber layer with large perovskite crystalline grains, is realized by simply incorporating small amounts of additives into precursor solutions, and utilizing the anti-solvent engineering technique to control the nucleation and growth of perovskite crystal, turning out the enhanced device efficiency (NH 4 F: 14.88 ± 0.33%, NH 4 Cl: 16.63 ± 0.21%, NH 4 Br: 16.64 ± 0.35%, and NH 4 I: 17.28 ± 0.15%) compared to that of a reference MAPbI 3 device (Ref.: 12.95 ± 0.48%). In addition, this simple technique of ammonium halide addition to precursor solutions increase the device reproducibility as well as long term stability., (© 2019 The Authors.)

Solution-processed organic solar cells (OSCs) and hybrid perovskite solar cells (PvSCs) generally require appropriate transparent electrode with a low work function, which improves the electron extraction, increases the built-in potential, and suppresses charge recombinations. Hence, interfacial modifiers between the cathode and the photoactive layer play a significant role in OSCs and PvSCs, as they provide suitable energy-level alignment, leading to desirable charge carrier selectivity and suppressing charge carrier recombinations at the interfaces. Here, we present a comprehensive study of the energy-level mapping between a transparent electrode and photoactive layers to enhance the electron-transport ability by introducing amine-based interfacial modifiers (ABIMs). Among the ABIMs, polyethylenimine ethoxylated (PEIE) incorporating inverted OSCs shows enhanced power conversion efficiencies (PCEs) from 0.32 to 9.83% due to large interfacial dipole moments, leading to a well-aligned energy level between the cathode and the photoactive layer. Furthermore, we explore the versatility of the PEIE ABIM by employing different photoactive layers with fullerene derivatives, a nonfullerene acceptor, and a perovskite layer. Promisingly, inverted nonfullerene OSCs and planar n-i-p PvSCs with PEIE ABIM show outstanding PCEs of 11.88 and 17.15%, respectively.