Search

Sn-based perovskites have intrinsic defects, such as Sn vacancies, oxidised components (Sn4+), and local lattice strain in the perovskite crystalline structure. In this study, Zn metal powder (Zn0) was introduced to reduce Sn oxidation in the solution step based on the redox potential difference. Additionally, Zn2+ was introduced in the perovskite precursor, which decreased the intrinsic defects and lattice strain of the perovskite films. The diffusion length, particularly that of the hole, increased with a reduction in the lattice strain, and Zn doping led to interfacial energy-level alignment of the perovskite and hole-transporting layers. The reduced lattice strain decreased the defect density and charge carrier recombination of perovskite devices. The power conversion efficiency of the Zn-doped Sn-based perovskite solar cell was improved to 11.39% compared to the 8.56% of the reference device. [ABSTRACT FROM AUTHOR]

Pb‐free Sn‐based perovskite solar cells (PSCs) have significant potential for application in photovoltaic devices because of their suitable bandgap, low exciton binding energy, high carrier mobility, and long diffusion length. However, their performance is hampered by several issues. Sn‐based perovskites are highly susceptible to oxidation, which induces a high concentration of defects and degrades the chemical stability of the perovskite crystals. Herein, the anion formate (HCOO−) can effectively suppress the oxidation of Sn in the pure formamidinium tin triiodide (FASnI3) perovskite without using A‐site cationic additives. Moreover, the presence of formate results in a uniform pinhole‐free perovskite film with a low trap density, reduced charge carrier recombination, and improved charge extraction. Density functional theory calculations show that formate‐treated FASnI3 has improved stability against oxidative Sn degradation. The formate‐treated PSC achieves a power conversion efficiency of 12.11% at a high open‐circuit voltage of 0.71 V. The device exhibits improved stability in ambient air in which it maintained over 80% of its initial power conversion efficiency after 180 min because oxidation is inhibited owing to the strong interaction between Sn and formate. [ABSTRACT FROM AUTHOR]

The photovoltaic performance of inverted perovskite solar cells (PSCs) relies on effectively managing the interface between the hole extraction layer and the light‐absorbing perovskite layer. In this study, we have synthesised (4‐(3,6‐bis(methylthio)‐9H‐carbazol‐9‐yl)butyl)phosphonic acid (MeS‐4PACz), which forms a self‐assembled monolayer (SAM) on the fluorine‐doped tin oxide (FTO) electrode. The molecule‘s methylthio substituents generate a favourable interfacial dipole moment and interact with the perovskite layer. This interaction results in well‐aligned energy levels among the FTO/SAM/perovskite layers, promoting efficient hole extraction and significantly reducing carrier recombination losses. Additionally, the methylthio groups passivate iodide vacancies and interact with Pb2+ ions of the perovskite, reducing defect‐induced trap states and enhancing the crystalline growth of the perovskite layer. Consequently, inverted PSCs incorporating MeS‐4PACz achieve a power conversion efficiency of 25.13 %, along with outstanding photostability. [ABSTRACT FROM AUTHOR]

Phenyl-C 61 -butyric acid methyl ester (PCBM) can be used as a passivation material in perovskite solar cells (PeSCs) in order to reduce the trap site of the perovskite. Here, we show that a thick PCBM layer can form a smoother surface on the SnO 2 substrate, improving the grain size and reducing the microstrain of the perovskite. High-temperature annealing treatment of PCBM layer not only increases its solvent resistance to perovskite precursor or antisolvent, but also enhances its molecular alignment, resulting in improved conductivity as an electron transport layer. High-temperature annealed PCBM (HT-PCBM) effectively minimizes trap-assisted nonradiative recombination by reducing trap density in perovskite and improving the electrical properties at the interface between SnO 2 and perovskite layers. This HT-PCBM process significantly enhances the performance of the PeSCs, including the open-circuit voltage ( V OC ) from 0.39 to 0.77 V, fill factor from 52% to 65%, and power conversion efficiency (PCE) from 6.03% to 15.50%, representing substantial improvements compared to devices without PCBM. This PCE is the highest efficiency among conventional (n-i-p) Sn-Pb PeSCs reported to date. Moreover, passivating the trap sites of SnO 2 and separating the interface between the Sn-containing perovskite and the substrate effectively have improved the stability of the Sn-Pb perovskite in the n-i-p structure. The optimized best device with HT-PCBM has maintained an efficiency of over 90% for more than 300 h at 85 °C and 5000 h at room temperature in a glovebox atmosphere.

Inorganic lead halide perovskite nanocrystals (PeNCs) have intensively drawn attention as efficient light-emitting materials for optoelectronic applications due to their fine optoelectronic properties with a high photoluminescence quantum yield and easily tunable saturated emission color. However, the poor stability of the red-emitting PeNCs has become an obstacle because of the uncontrollable iodine substitution from the PeNCs due to weak Pb-I bonding. In this work, we have demonstrated a ligand-mediated post-treatment (LMPT) method using a halide ion-pair ligand, tridodecylmethyl ammonium iodide (TrDAI), for the air stable and high-quality red-emitting PeNCs. Through the LMPT method, the optoelectronic properties of red-emitting PeNCs are dramatically improved resulting in a PLQY of 88.7% at 637 ± 2 nm emission with an increased carrier lifetime from 20.77 to 31.52 ns. We achieve highly efficient red perovskite light-emitting diodes exhibiting a maximum current efficiency of 7.69 cd A -1 and an external quantum efficiency of 6.36% at 637 ± 2 nm electroluminescence emission with a sharp full-width at half maximum of 31 nm.