Search

In order to reduce energy consumption of the centralized chilled-water cooling system in large buildings, a dynamic control strategy was proposed for cooling plants by modelling and optimization. Combined with the chilled water flow model, this paper analyzed the parallel operation characteristics of the chillers and takes the load distribution as one of the control parameters. Based on the measured data of a typical cooling system that has undergone preliminary energy-saving transformation, the residual neural network is applied to model the relationship among energy consumption, controllable parameters and environmental parameters, and the residual neural network outperforms multi-layer perceptron and support vector regression. To minimize the total energy consumption, the gray wolf optimizer was introduced to optimize the controllable variables of the cooling system. Compared with the energy consumption before optimization, the simulation energy consumption after optimization decreased 10.45% on average, while the energy saving rate is only 7.9% with equal chilled water supply temperature of parallel chillers. [ABSTRACT FROM AUTHOR]

• Be different from the existing Mie-scattering slant visibility lidar, a two-wavelength Raman-Mie scanning lidar is proposed slant visibility measurements. • The four-channel spectroscopic system is designed to provide enough aerosol parameter profiles and to obtain 33-layer actual atmospheric scattered radiance. • Vertical lidar and slant lidar are combined to contribute to calculate the slant visibility at any slant directions. • Slant visibility distances are realized with consideration of the interaction of the actual atmospheric scattered radiance and atmospheric transparency. • Lidar experiments under different weather conditions demonstrated the feasibility of the lidar system. Considering the necessity of lidar for atmospheric scattered radiance measurement, and the application scenario in civil aviation airports, an eye-safe two-wavelength Raman-Mie lidar is proposed for slant visibility measurements, which differs from the existing Mie-scattering slant visibility lidar. Lidar system is to provide atmospheric aerosol parameters for SBDART model, so as to solve the calculation of actual atmospheric scattered radiance. The obtained information including the total irradiance, the scattered radiance, and the atmospheric transparency are combined to calculate the contrast ratio between the object and the background.Lidar experiments were carried out over Xi'an University of Technology, China (34.233°N, 108.911°E), and two cases conducted under overcast and haze conditions are investigated. Using the 33-layer atmospheric aerosol list by vertical lidar detection, the 33-layer actual atmospheric scattered radiance and the total solar irradiance are obtained by SBDART model. The atmospheric transparency is further obtained by slant scanning detection. Taking the playground runway and the grassland as the object and the background, the contrast ratio curves can be calculated with consideration of actual atmospheric scattered radiance and atmospheric transparency, and the slant visibility distances can be thus obtained at any slant directions under the contrast ratio of 0.05. The results under overcast condition showed that, the obtained slant visibility is at the distance of 9 km and 11.2 km at a zenith angle of 50° and 70°, with the statistical measurement error of 12.5% and 6.54%. The results under haze weather condition also differs at slant directions, the slant visibility distances varied ranging from 4.4 km to 6.51 km, and the statistical measurement errors are approximately of 10.21% and 8.89%. The results demonstrated the developed two-wavelength Raman-Mie lidar provides a new solution to actual atmospheric scattered radiance measurements, and also validated its feasibility and reliability for accurate slant visibility measurements. [ABSTRACT FROM AUTHOR]