Search

An in situ XPS measurement is proposed by employing a built-in charge neutralization system to simulate the practical operation of light-emitting diodes for unraveling the degraded electron durability of reduced-dimensional perovskite emitters.

MR-TADF emitters with narrow emission have been developed and are expected to become fourth-generation emitters for HD-OLEDs, with molecular design guidelines and commercial prospects outlined in this review.

DCBTRZ and PPCTRZ based devices achieved narrow deep blue emission with CIEys of 0.059/0.063 and FWHMs of 56/54 nm, respectively.

The synthesized 3,6,11-triTPA-BPQ yellow dopant exhibits a high horizontal emitting dipole ratio of 92%, leading to a high-performance yellow organic light-emitting diode with an external quantum efficiency of 30.3%.

Charge transfer dynamics is decisive for the performance of perovskite light emitting diodes (PeLEDs), and deep insight into the charge transfer process inside the working device is indispensable. Here, the influence of the hole transport layer on charge transport and recombination processes in PeLEDs is investigated via impedance spectroscopy. The results demonstrate that the rational interfacial energy level alignment can improve the radiative recombination by reducing the leakage current and carrier transport resistance. Shockley-Read-Hall recombination and Auger recombination enlarge the lifetime of carrier transfer in the working devices as determined from the electroluminescence spectrum. Our work provides a distinctive and reliable method to explore the charge transfer property and highlights the importance of interfaces to boost the performance of PeLEDs.

Perovskite light-emitting diodes (PeLEDs) featuring excellent electroluminescent (EL) characteristics and facile production have been emerging as promising candidates for next-generation high-definition displays. In recent years, tremendous advances have been achieved in the EL efficiency of PeLEDs. However, their poor operational stability impedes practical applications. Particularly, the severe spectral instability of pure-blue and pure-red PeLEDs lags far behind the requirements of commercial displays. In this Perspective, the critical factors related to device degradation are first summarized, including perovskite crystal defects, unbalanced charge injection, Auger recombination, and Joule heating. Then, the recent progress in improving the operational and spectral stabilities is reviewed in categories. Considering the present achievements, we provide potential research directions for further development of stable PeLEDs.

A facile and reliable crystallization manipulation strategy has been proposed to enhance the radiative recombination and carrier transport capacity of the perovskite layer by modifying the underneath substrate with ammonium thiocyanate. The EQE of PeLEDs is boosted from 3.2% to 14.7%.

The booming growth of all inorganic cesium lead halide perovskites in optoelectronic applications has prompted extensive research interest in the fabrication of ordered nanostructures or microarrays for enhanced device performances.

The introduction of different donors at the para-carbon position of the BNCz core modulates the predominance of locally excited (LE)/charger transfer (CT) states of the TADF materials to achieve full-color emission.

Organic materials featuring intramolecular through-space charge transfer (TSCT) excited states are advantageous for efficient thermally activated delayed fluorescence (TADF), although the realization of multiple TSCT systems remains challenging. Herein, a rigid molecule with a three-dimensional dislocated sandwich acceptor-donor-acceptor configuration has been developed by a linking biphenazine (2PXZ) donor and 2,4,6-triphenyl-1,3,5-triazine (TRZ) acceptor through the twin-locking of two spiro-fluorene bridges. The twin-locking construction with multiple TSCT effects suppresses the intramolecular rotations of various segments in 2PXZ-2TRZ, leading to a small singlet-triplet energy difference, a fast reverse intersystem crossing process, and high photoluminescence quantum yield. This material simultaneously possesses the capabilities of TADF and aggregation-induced emission. The device employing 2PXZ-2TRZ as a dopant displays an optimal external quantum efficiency of 27.1 % and a low efficiency roll-off.

The charge carriers of single-junction solar cells can be fluently extracted and then collected by electrodes, leading to weak charge carrier accumulation and low energy loss (E

Despite tremendous developments in the luminescene performance of perovskite light-emitting diodes (PeLEDs), the brittle nature of perovskite crystals and their poor crystallinity on flexible substrates inevitably lead to inferior performance. Inspired by pangolins' combination of rigid scales and soft flesh, we propose a bionic structure design for self-healing flexible PeLEDs by employing a polymer-assisted crystal regulation method with a soft elastomer of diphenylmethane diisocyanate polyurethane (MDI-PU). The crystallinity and flexural strain resistance of such perovskite films on plastics with silver-nanowire-based flexible transparent electrodes are highly enhanced. The detrimental cracks induced during repeated deformation can be effectively self-healed under heat treatment via intramolecular/intermolecular hydrogen bonds with MDI-PU. Upon collective optimization of the perovskite films and device architecture, the blue-emitting flexible PeLEDs can achieve a record external quantum efficiency of 13.5% and high resistance to flexural strain, which retain 87.8 and 80.7% of their initial efficiency after repeated bending and twisting operations of 2000 cycles, respectively.

Split liver transplantation (SLT) is a complex procedure. The left-lateral and right tri-segment splits are the most common surgical approaches and are based on the Couinaud liver segmentation theory. Notably, the liver surface following right tri-segment splits may exhibit different degrees of ischemic changes related to the destruction of the local portal vein blood flow topology. There is currently no consensus on preoperative evaluation and predictive strategy for hepatic segmental necrosis after SLT.To investigate the application of the topological approach in liver segmentation based on 3D visualization technology in the surgical planning of SLT.Clinical data of 10 recipients and 5 donors who underwent SLT at Shenzhen Third People's Hospital from January 2020 to January 2021 were retrospectively analyzed. Before surgery, all the donors were subjected to 3D modeling and evaluation. Based on the 3D-reconstructed models, the liver splitting procedure was simulated using the liver segmentation system described by Couinaud and a blood flow topology liver segmentation (BFTLS) method. In addition, the volume of the liver was also quantified. Statistical indexes mainly included the hepatic vasculature and expected volume of split grafts evaluated by 3D models, the actual liver volume, and the ischemia state of the hepatic segments during the actual surgery.Among the 5 cases of split liver surgery, the liver was split into a left-lateral segment and right tri-segment in 4 cases, while 1 case was split using the left and right half liver splitting. All operations were successfully implemented according to the preoperative plan. According to Couinaud liver segmentation system and BFTLS methods, the volume of the left lateral segment was 359.00 ± 101.57 mL and 367.75 ± 99.73 mL, respectively, while that measured during the actual surgery was 397.50 ± 37.97 mL. The volume of segment IV (the portion of ischemic liver lobes) allocated to the right tri-segment was 136.31 ± 86.10 mL, as determined using the topological approach to liver segmentation. However, during the actual surgical intervention, ischemia of the right tri-segment section was observed in 4 cases, including 1 case of necrosis and bile leakage, with an ischemic liver volume of 238.7 mL.3D visualization technology can guide the preoperative planning of SLT and improve accuracy during the intervention. The simulated operation based on 3D visualization of blood flow topology may be useful to predict the degree of ischemia in the liver segment and provide a reference for determining whether the ischemic liver tissue should be removed during the surgery.

Thrombectomy and anatomical anastomosis (TAA) has long been considered the optimal approach to portal vein thrombosis (PVT) in liver transplantation (LT). However, TAA and the current approach for non-physiological portal reconstructions are associated with a higher rate of complications and mortality in some cases.To describe a new choice for reconstructing the portal vein through a posterior pancreatic tunnel (RPVPPT) to address cases of unresectable PVT.Between August 2019 and August 2021, 245 adult LTs were performed. Forty-five (18.4%) patients were confirmed to have PVT before surgery, among which seven underwent PV reconstructionDuring the procedure, PVT was found in all the seven cases with significant adhesion to the vascular wall and could not be dissected. The portal vein proximal to the superior mesenteric vein was damaged in one case when attempting thrombolectomy, resulting in massive bleeding. LT was successfully performed in all patients with a mean duration of 585 min (range 491-756 min) and mean intraoperative blood loss of 800 mL (range 500-3000 mL). Postoperative complications consisted of chylous leakage (The RPVPPT technique might be a safe and effective surgical procedure during LT for complex PVT. However, follow-up studies with large samples are still warranted due to the relatively small number of cases.

Excess lead iodide (PbI2) plays a crucial role in passivating the defects of perovskite films and boosting the power conversion efficiency (PCE) of perovskite solar cells (PSCs). However, the photolysis of PbI2 is easily triggered by light illumination, which accelerates the decomposition of perovskite materials and weakens the long-term stability of PSCs. Herein, the high light tolerance of lead iodide (PbI2) is reported by introducing an electron-donor molecule, namely, 2-thiophenecarboxamide (2-TCAm), to strengthen the [PbX6]4- frame. Characterization reveals that the retarded decomposition of PbI2 is attributed to the interactions between Pb2+ and the organic functional groups in 2-TCAm as well as the optimized distribution of PbI2. The crystallization and morphology of 2-TCAm-doped perovskite films are improved simultaneously. The 2-TCAm-based PSCs achieve a 16.8% increase in PCE and nearly 12 times increase in the lifetime as compared to the reference device. The demonstrated method provides insight into the stability of PbI2 and its influence on PSCs.

On-surface Ullmann coupling has been intensely utilized for the tailor-made fabrication of conjugated frameworks towards molecular electronics, however, reaction mechanisms are still limitedly understood. Herein, we provide a comprehensive elucidation of the surface Ullmann coupling of 2,7-dibromopyrene (Br2Py) on Ag(111) by scanning tunnelling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and density function theory (DFT), and reveal that the Ullmann reaction path is unique regardless of predesigned assembled structures. By manipulating deposition conditions, diverse assembled architectures have been constructed for Br2Py on Ag(111), including the ladder phase, parallel arrangement, hexagonal patterns from monomers or Kagome lattices based on organometallic (OM) dimers. Intriguingly, stepwise annealing leads to an identical reaction diagram for the surface Ullmann coupling from individual assembled structures convergent into the brick-wall-pattern OM dimers first, which is deemed to be a stable phase, and then into elongated OM chains in order and eventually long-range polymers with direct C-C coupling. While the reaction mechanism is demonstrated to be dominated by the metal coordinated and halogen bonding motifs, interestingly, it has also been revealed that surface adatoms and dissociated Br atoms play a crucial role in coupling reactions. In contrast to previous reports demonstrating the manipulation of Ullmann reactions by preassembled strategy, herein, weak intermolecular interaction in assembled nanostructures is immediately suppressed by strong covalent bonding during reactions. Importantly, our report proposes essential insights on fundamental understanding of surface Ullmann coupling towards high-yield surface synthesis.

Metal halide perovskite light-emitting diodes (PeLEDs) have been recognized as emerging candidates for next-generation solution-processed electronic display technology, and great progress has been made in recent years. However, their poor operational stability is yet to be solved. Here, we present a reformative all-inorganic red-emission PeLED based on the passivation effect caused by the incorporation of zinc ions into perovskites for enhancing the efficiency and operational stability. A high-quality quasi-two-dimensional perovskite CsPbI3−xBrx thin film with good crystallinity is obtained, benefiting from the combination of large organic ammonium ions (PEA+ ions) and inorganic salt zinc iodide (ZnI2). As a result, ZnI2-passivated CsPbI3−xBrx PeLEDs emitting at 666 nm show a maximum external quantum efficiency of 9.93% and a maximum brightness of 4258 cd m−2. More importantly, the PeLEDs achieve a long half-lifetime of about 2667 h at an initial luminance of 100 cd m−2. This work provides a facile method to obtain stable and efficient red-emission PeLEDs.

Organic-inorganic hybrid lead halide perovskites are potential candidates for next-generation light-emitting diodes (LEDs) in terms of tunable emission wavelengths, high electroluminescence efficiency, and excellent color purity. However, the device performance is still limited by severe non-radiative recombination losses and operational instability due to a high degree of defect states on the perovskite surface. Here, an effective surface engineering method is developed via the assistance of guanidinium iodide (GAI), which allows the formation of surface-2D heterophased perovskite nanograins and surface defect passivation due to the bonding with undercoordinated halide ions. Efficient and stable red-emission LEDs are realized with the improved optoelectronic properties of GAI-modified perovskite nanograins by suppressing the trap-mediated non-radiative recombination loss. The champion device with a high color purity at 692 nm achieves an external quantum efficiency of 17.1%, which is 2.3 times that of the control device. Furthermore, the operational stability is highly improved, showing a half-lifetime of 563 min at an initial luminance of 1000 cd m-2. The proposed GAI-assisted surface engineering is a promising approach for defect passivation and phase engineering in perovskite films to achieve high-performance perovskite LEDs.

The booming growth of all inorganic cesium lead halide perovskites in optoelectronic applications has prompted extensive research interest in the fabrication of ordered nanostructures or microarrays for enhanced device performances. However, the high cost and complexity of commercial lithographic approaches impede the facile fabrication of perovskite microarrays. Herein, CsPbBr

An energy-saving and eco-friendly method for the efficient construction of various tri- and tetra-substituted pyrrolecarbonitriles through ultrasound-assisted multicomponent tandem reaction of readily available alkenes, TMSCN and N,N-disubstituted formamides within 40 min under metal-, solvent-free and mild conditions was developed. The dual role of iodine (catalyst and oxidant) notably simplified the reaction conditions and reduced the chemical waste generated

All-inorganic perovskite cesium lead iodide/bromide (CsPbI2Br) is considered as a robust absorber for perovskite solar cells (PSCs) because of its excellent thermal stability that guarantees its long-term operation stability. Efficient CsPbI2Br PSCs are available when obtaining low energy loss, which needs efficient charge generation, less charge recombination, and balanced charge extraction. However, numerous traps in perovskites hinder the photon-electron conversion process. Herein, hierarchical manipulation of charge recombination is proposed for CsPbI2Br PSCs featuring low energy loss. Nonselective trap reduction and selective halogen vacancy passivation are performed using 2,2'-(ethylenedioxy)diethylamine and phenylbutylammonium iodide for the bottom and top contacts, respectively. Because of all-around suppressed charge recombination, balanced charge extraction and suppressed hysteresis are realized. The champion PSC achieves an open-circuit voltage of 1.30 eV, a fill factor of 80.2%, and a power conversion efficiency of 16.6% that is 28.6% higher than that of the reference device. Moreover, the thermostability of PSCs is simultaneously enhanced because of the limited defect-assisted degradation.

Mixed A-site engineering is an emerging strategy to overcome the difficulties in realizing high-quality perovskite films together with high ambient stability. Particularly, the α-FACsPbI3-based hybrid perovskites have been considered as a promising candidate for solar cell applications. However, the degradation mechanism of α-FACsPbI3 hybrid perovskites induced by light illumination remains unclear. Here, the illumination-caused instability of α-FACsPbI3 hybrid perovskites is investigated using various surface detection technologies, including photoelectron spectroscopy, scanning electron microscopy, and grazing incidence X-ray diffraction. The experimental findings reveal that the A-site vacancies arise from the migration of Cs+ cations from the perovskite surface into the bulk under light illumination, while their content is dependent on the light energy. The visible light enlarges the crystal lattice on the perovskite surface, leading to the Cs+ cation migration along with the lattice distortion of the PbI64- octahedron and phase separation. However, the ultraviolet light further causes a stronger interaction between FA+ and [PbI6]4-, leading to the partial decomposition of [PbI6]4- into Pb0 and I-. These results enrich the photodegradation mechanism, guiding the design of efficient and stable perovskite solar cells through surface passivation to suppress the Cs+ cation migration and to increase the octahedron dissociation energy.

The visual aesthetic that involves color, brightness, and glossiness is of great importance for building integrated photovoltaics. Semitransparent organic solar cells (ST-OSCs) are thus considered as the most promising candidate due to their superiority in transparency and efficiency. However, the realization of high color purity with narrow bandpass transmitted light usually causes the severely suppressed transparency in ST-OSCs. Herein, we present a spectrally selective electrode (SSE) by imitating the integrating strategy of beetle cuticle for achieving narrow bandpass ST-OSCs with high efficiency and long-term stability. The proposed SSE allows for efficient light-selective passage, leading to tunable narrow bandpass transmitted light from violet to red. An optimized power conversion efficiency of 15.07% is achieved for colorful ST-OSCs, which exhibit color purity close to 100% and a peak transmittance approaching 30%. Long-term stability is also improved for ST-OSCs made with this SSE due to the light-rejecting and the moisture-blocking abilities. The realization of bright and colorful ST-OSCs also indicates the application potential of SSEs in light-emitting diodes, lasers, and photodetectors.

Although perovskite light-emitting diodes (PeLEDs) are promising for next-generation displays and lighting, their efficiency is still considerably below that of conventional inorganic and organic counterparts. Significant efforts in various aspects of the electroluminescence process are required to achieve high-performance PeLEDs. Here, we present an improved flexible PeLED structure based on the rational interface engineering for energy-efficient photon generation and enhanced light outcoupling. The interface-stimulated crystallization and defect passivation of the perovskite emitter are synergistically realized by tuning the underlying interlayer, leading to the suppression of trap-mediated nonradiative recombination losses. Besides approaching highly emissive perovskite layers, the outcoupling of trapped light is also enhanced by combining the silver nanowires-based electrode with quasi-random nanopatterns on flexible plastic substrate. Upon the collective optimization of the device structure, a record external quantum efficiency of 24.5% is achieved for flexible PeLEDs based on green-emitting CsPbBr3 perovskite.

White organic light-emitting diodes (WOLEDs) using thermally activated delayed fluorescence (TADF)-based single emissive layer (SEL) have attracted enormous attention because of their simple device structure and full exciton utilization potential for high efficiency. However, WOLEDs made of an all-TADF SEL usually exhibit serious efficiency roll-off and poor color stability due to serious exciton-annihilation and unbalanced radiative decays of different TADF emitters. Herein, a new strategy is proposed to manipulate the TADF-sensitized fluorescence process by combining dual-host systems of high triplet energy with a conventional fluorescent emitter of complementary color. The multiple energy-funneling paths are modulated and short-range Dexter energy transfer is largely suppressed due to the steric effect of peripheral tert-butyl group in the blue TADF sensitizer. The resulting all-fluorescent WOLEDs achieve an unprecedentedly high external quantum efficiency of 21.8% with balanced white emission of Commission Internationale de l'Eclairage coordinate of (0.292, 0.343), accompanied with good color stability, reduced efficiency roll-off, and prolonged operational lifetime. These findings demonstrate the validity of this strategy for precisely allocating the exciton harvesting in SEL WOLEDs.

Organic light-emitting diodes (OLEDs) have rapidly grown as one of the leading technologies for full-color display panels and eco-friendly lighting sources due to their outstanding features including superior color quality, wide viewing angle, mercury-free manufacture, fascinating flexibility, etc. A variety of materials, device architectures, as well as processing techniques have been investigated for optimizing device performance in order to fulfill the requirements of lighting and display applications. In this review, we first summarize the light emission mechanisms of electroluminescent materials. Then, the designed device architectures aiming at the realization of various light emission mechanisms are reviewed. An overview of recent advances in light extraction strategies is presented since all efficient OLEDs have a multi-thin-film structure, which leads to severe light trapping in devices. In addition, the progress of flexible OLEDs is reviewed from the aspect of flexible transparent electrodes because of their great potential in flexible displays. Most recent breakthroughs of solid-state lighting and displays are briefly addressed as well. A brief perspective on future research is also proposed for pursuing the commercialization of OLEDs.

Surface engineering and doping are common methods used to enhance the emission properties of perovskite quantum dot light-emitting diodes (PeQLEDs), and more effective methods need to be developed. Here, we introduce a spin-coated trioctylphosphine oxide (TOPO) layer that spontaneously forms concave–convex micro grid structures between the hole-transport layer (TFB) and the CsPbBr3 quantum dot (QD) layer. The unique concave–convex micro grid structures change with the concentration of TOPO solution and the type of solvent, which may be caused by the surface tension. Spectral measurements reveal that the TOPO layer passivates the surface defects between the perovskite QDs. The finite-difference-time-domain (FDTD) method proves that these concave–convex micro grid structures also increase light output from the quantum dot light-emitting diodes (QLEDs). As a result, green perovskite QD light emitting diodes (LEDs) of 514 nm with a Luminous Efficiency (LE) of 3975 cd m−2, Current Efficiency (CE) of 18.8 cd A−1 and External Quantum Efficiency (EQE) of 6.7% can be achieved, which are improved three-fold compared to the CsPbBr3 QLEDs without the TOPO layer. Our work suggests that the micro grid structures of the TOPO layer provide a novel and facile way to enhance the performance of the perovskite QLEDs.

High-efficiency orange and red thermally activated delayed fluorescent (TADF) organic light-emitting diodes were fabricated based on a pair of isomers 3,6,11-triAC-BPQ and 3,6,12-triAC-BPQ, containing a rigid dibenzo[f,h]pyrido[2,3-b]quinoxaline (BPQ) core and three 9,9-dimethyl-9,10-dihydroacridine (Ac) donors. Both materials exhibited red emission in neat films and small singlet–triplet energy gaps. Compared with the stable intramolecular charge transfer (ICT) state of 3,6,12-triAC-BPQ, 3,6,11-triAC-BPQ showed hybridized local and charge transfer (HLCT) character due to the H-bond between the 11-position Ac and 10-position N atom. As a result, the doped film of 3,6,11-triAC-BPQ showed a high photoluminescence quantum yield (PLQY) and the related device showed a high external quantum efficiency (EQE) of 22.0% in the orange–red region.

All-inorganic perovskite solar cells (PSCs) have become one of the most attractive research fields in recent years due to their excellent thermal stability and light stability as compared with their organic-inorganic hybrid counterparts. However, there is still a long way to go for their commercial application due to their low efficiency and poor stability under humidity conditions. Herein, an overview of the recent progress of all-inorganic PSCs based on interface engineering is provided. The main roles of interface engineering, adjusting energy-level alignment, enhancing charge transport capacity, passivating interface defects, modulating morphology of perovskite films, stabilizing perovskite phase, broadening spectral absorption, eliminating electrical hysteresis and enhancing operational stability, are summarized with examples, which paves the way for highly efficient and stable all-inorganic PSCs. Some of the latest progress in incorporating dopants to charge transport materials and modifying interface properties in all-inorganic PSCs are also covered.

Thermally activated delayed fluorescence (TADF) emitters have attracted great attention for their use in organic light-emitting diodes since they can potentially realize 100% internal quantum efficiency by utilizing both singlet and triplet excitons due to an efficient reverse intersystem crossing process. However, forming a rational molecular design strategy is still challenging for high-performance TADF emitters. It is critical to understand the key factors that affect the performance of TADF materials. In this regard, this review focuses on the recent progress made in the design and synthesis of TADF materials controlled by the position and number of donor and acceptor units in different molecular structures. Reasonable molecular design principles have been summarized with the photophysical and electroluminescence characteristics of TADF materials. Furthermore, design guidelines and future prospects for high-performance TADF emitters are proposed for their future development.

For the development of solution-processed organic light-emitting diodes (OLEDs), it is highly desirable yet challenging to realize solution-processable non-doped thermally activated delayed fluorescence (TADF) emitters due to their high efficiency and excellent compatibility to the wet methods. Herein, two pairs of blue TADF isomers are designed and synthesized with a hetero-donor configuration for the realization of high photoluminescent quantum yield. The incorporation of two tert-butyl groups in the molecules can effectively increase the molecular solubility and reduce the aggregation-caused self-quenching of excitons in neat films by inhibiting the intramolecular vibrational relaxation and the intermolecular π–π stacking. Solution-processed non-doped OLEDs are achieved with these blue TADF emitters, exhibiting the record-high external quantum efficiencies (EQE) of 25.8%. Furthermore, an all-TADF white OLED with an EQE of 27.3% is also achieved by employing a single emitting layer with the blue TADF emitter as a host for an orange-red TADF dopant.