Search

Abstract Parity-time (PT) symmetry has enabled the demonstration of fascinating wave phenomena in non-Hermitian systems characterized by precisely balanced gain and loss. Until now, the exploration and observation of PT symmetry in scattering settings have largely been limited to propagating waves. Here, we demonstrate a versatile coupled-resonator acoustic waveguide (CRAW) system that enables the observation of PT-symmetric scattering responses for evanescent waves within a bandgap. By examining the generalized scattering matrix in the evanescent wave regime, we observe hallmark PT-symmetric phenomena—including phase transitions at an exceptional point, anisotropic transmission resonances, and laser-absorber modes—in systems that do not require balanced distributions of gain and loss. Owing to the peculiar energy transfer features of evanescent waves, our results not only demonstrate a distinct pathway for observing PT symmetry, but also enable strategies for exotic energy tunneling mechanisms, paving fresh directions for wave engineering grounded in non-Hermitian physics.

Abstract Robust high-order optical vortices are much in demand for applications in optical manipulation, optical communications, quantum entanglement and quantum computing. However, in numerous experimental settings, a controlled generation of optical vortices with arbitrary orbital angular momentum remains a challenge. Here, we present a concept of “optical vortex ladder” for the stepwise generation of optical vortices through Sisyphus pumping of pseudospin modes in photonic graphene. The ladder is applicable in various lattices with Dirac-like structures. Instead of conical diffraction and incomplete pseudospin conversion under conventional Gaussian beam excitations, the vortices produced in the ladder arise from non-trivial topology and feature diffraction-free Bessel profiles, thanks to the refined excitation of the ring spectrum around the Dirac cones. By employing a periodic “kick” to the photonic graphene, effectively inducing the Sisyphus pumping, the ladder enables tunable generation of optical vortices of any order even when the initial excitation does not involve any orbital angular momentum. The optical vortex ladder stands out as an intriguing non-Hermitian dynamical system, and, among other possibilities, opens a pathway for applications of topological singularities in beam shaping and wavefront engineering.

Abstract Optical Kerr effect, in which input light intensity linearly alters the refractive index, has enabled the generation of optical solitons, supercontinuum spectra, and frequency combs, playing vital roles in the on-chip devices, fiber communications, and quantum manipulations. Especially, terahertz Kerr effect, featuring fascinating prospects in future high-rate computing, artificial intelligence, and cloud-based technologies, encounters a great challenge due to the rather low power density and feeble Kerr response. Here, we demonstrate a giant terahertz frequency Kerr nonlinearity mediated by stimulated phonon polaritons. Under the influences of the giant Kerr nonlinearity, the power-dependent refractive index change would result in a frequency shift in the microcavity, which was experimentally demonstrated via the measurement of the resonant mode of a chip-scale lithium niobate Fabry-Pérot microcavity. Attributed to the existence of stimulated phonon polaritons, the nonlinear coefficient extracted from the frequency shifts is orders of magnitude larger than that of visible and infrared light, which is also theoretically demonstrated by nonlinear Huang equations. This work opens an avenue for many rich and fruitful terahertz Kerr effect based physical, chemical, and biological systems that have terahertz fingerprints.

ABSTRACTThe lithium niobate on insulator devices confine the light field to submicron size in monocrystalline lithium niobate, to achieve ultra-strong electro-optical interaction and nonlinear optical interaction, and thus extend the frontiers of the photonic research in the past decade. Such devices are manufactured using nano-fabrication technology over the thin-film lithium niobate wafer, which usually stands on a silica insulator layer above the substrate material, including low-loss waveguides, electro-optical modulators, domain engineered structures, high-Q microring resonators and electrical filters etc., and lead to breakthroughs in optical communication, microwave photonics and quantum integration.

Abstract Collective cells, a typical active matter system, exhibit complex coordinated behaviors fundamental for various developmental and physiological processes. The present work discovers a collective radial ordered migration behavior of NIH3T3 fibroblasts that depends on persistent top‐down regulation with 2D spatial confinement. Remarkably, individual cells move in a weak‐oriented, diffusive‐like rather than strong‐oriented ballistic manner. Despite this, the collective movement is spatiotemporal heterogeneous and radial ordering at supracellular scale, manifesting as a radial ordered wavefront originated from the boundary and propagated toward the center of pattern. Combining bottom‐up cell‐to‐extracellular matrix (ECM) interaction strategy, numerical simulations based on a developed mechanical model well reproduce and explain above observations. The model further predicts the independence of geometric features on this ordering behavior, which is validated by experiments. These results together indicate such radial ordered collective migration is ascribed to the couple of top‐down regulation with spatial restriction and bottom‐up cellular endogenous nature.

Polymer-stabilized cholesteric liquid crystals (PSCLCs) have emerged as promising candidates for one-dimensional photonic lattices that enable precise tuning of the photonic band gap (PBG). This work systematically investigates the effect of polymer concentrations on the AC electric field-induced tuning of the PBG in PSCLCs, in so doing it explores a range of concentrations and provides new insights into how polymer concentration affects both the stabilization of cholesteric textures and the electro-optic response. We demonstrate that low polymer concentrations (≈3 wt. %) cause a blue shift in the short wavelength band edge, while high concentrations (≈10 wt. %) lead to a contraction and deterioration of the reflection band. Polarization optical microscopy was conducted to confirm the phase transition induced by the application of an electric field. The observations confirm that increased polymer concentration stabilizes the cholesteric texture. Particularly, the highly desired fingerprint texture was stabilized in a sample with 10 wt. % of the polymer, whereas it was unstable for lower polymer concentrations. Additionally, higher polymer concentrations also improved the dissymmetry factor and stability of the lasing emission, with the dissymmetry factor reaching the value of around 2 for samples with 10 wt. % of polymer additive. Our results provide valuable comprehension into the design of advanced PSCLC structures with tunable optical properties, enhancing device performance and paving the way for innovative photonic applications.

Collective cell migration is a coordinated movement of multi-cell systems essential for various processes throughout life. The collective motions often occur under spatial restrictions, hallmarked by the collective rotation of epithelial cells confined in circular substrates. Here, we aim to explore how geometric shapes of confinement regulate this collective cell movement. We develop quantitative methods for cell velocity orientation analysis, and find that boundary cells exhibit stronger tangential ordering migration than inner cells in circular pattern. Furthermore, decreased tangential ordering movement capability of collective cells in triangular and square patterns are observed, due to the disturbance of cell motion at unsmooth corners of these patterns. On the other hand, the collective cell rotation is slightly affected by a convex defect of the circular pattern, while almost hindered with a concave defect, also resulting from different smoothness features of their boundaries. Numerical simulations employing cell Potts model well reproduce and extend experimental observations. Together, our results highlight the importance of boundary smoothness in the regulation of collective cell tangential ordering migration.

Abstract Adjusting the grain growth orientation may be a feasible way to improve the oxidation resistance. In this work, textured Ti3(SiAl)C2 ceramic was successfully fabricated via the spark plasma sintering technique. The crystal orientation and microstructure were investigated by XRD combined with EBSD. The oxidation behavior of textured Ti3(SiAl)C2 was investigated at 1000–1300 °C for 10 h. The results showed that the oxidation was significantly anisotropic and the surface parallel to the compression direction exhibited better oxidation resistance below 1200 °C. The improved oxidation resistance was primarily attributed to the formation of passivated Al2O3 scale by rapid out-diffusion of Al elements on the orientated (hko) planes in textured Ti3(SiAl)C2. The formation of oxide scales was strongly dependent on the crystallographic orientation of Ti3(SiAl)C2.

Dense HfCxN1−x carbonitride ceramics are very promising as potential ultra-high temperature ceramics (UHTCs) for application under extremely harsh environments. However, the thermophysical and mechanical properties of the HfCxN1−x carbonitrides have not been investigated clearly. The present work prepared HfCxN1−x (x = 0.3, 0.4, 0.5, 0.6, 0.7) ceramics at 1950 °C under 30 MPa in flowing Ar atmosphere by using hot pressing sintering method. The relative densities of the samples obtained reached above 96%. Thermal conductivity of the as-prepared HfCxN1−x carbonitrides ranged from 19 to 24 W m−1 K−1 at room temperature. The increased role of electrons in thermal conduction caused by both increasing nitrogen content and increasing temperature, resulted in improved thermal conductivity, varying from 32 to 39 W m−1 K−1. With increasing nitrogen content, the electrical conductivity also increased, ranging from 149 to 213 × 104 Ω−1 m−1. With the increase of nitrogen content, Hf-C covalent bonds are gradually replaced by Hf-N covalent bonds with lower bond strength, resulting in HfC0.7N0.3 exhibiting the highest room-temperature flexural strength and hardness, HfC0.3N0.7 exhibiting the highest fracture toughness. Their mechanical properties are greatly improved over the binary HfC and HfN. The high-temperature flexural strength of the HfC0.7N0.3 decreased from 324 MPa at 1000 °C, to 139 MPa at 1600 °C and 100 MPa at 2000 °C. Meanwhile, it was revealed that the high-temperature flexural strength decreased with increasing nitrogen content for the as-prepared HfCxN1−x carbonitrides, similar to the changing trend of room-temperature flexural strength. The HfC0.3N0.7 possessed high-temperature plasticity at 2000 °C, attributed to the ability of the coarser grain to produce numerous layer dislocations.

Resonator-enhanced electro-optical (EO) combs could generate a series of comb lines with high coherence and stability. Recently, EO comb based on thin-film lithium niobate (TFLN) has begun to show great potential thanks to the high second-order nonlinearity coefficient of lithium niobate crystal. Here we demonstrate that EO comb envelope engineering based on mode crossing induced a quality factor reduction in the TFLN racetrack microcavity both in the numerical simulation and experiment. Our method paves the way for the generation of EO combs with an arbitrary envelope.

Abstract Mesenchymal migration usually happens on adhesive substrates, while cells adopt amoeboid migration on low/nonadhesive surfaces. Protein‐repelling reagents, e.g., poly(ethylene) glycol (PEG), are routinely employed to resist cell adhering and migrating. Contrary to these perceptions, this work discovers a unique locomotion of macrophages on adhesive–nonadhesive alternate substrates in vitro that they can overcome nonadhesive PEG gaps to reach adhesive regions in the mesenchymal mode. Adhering to extracellular matrix regions is a prerequisite for macrophages to perform further locomotion on the PEG regions. Podosomes are found highly enriched on the PEG region in macrophages and support their migration across the nonadhesive regions. Increasing podosome density through myosin IIA inhibition facilitates cell motility on adhesive–nonadhesive alternate substrates. Moreover, a developed cellular Potts model reproduces this mesenchymal migration. These findings together uncover a new migratory behavior on adhesive–nonadhesive alternate substrates in macrophages.

Holographic display has attracted widespread interest because of its ability to show the complete information of the object and bring people an unprecedented sense of presence. The absence of ideal recording materials has hampered the realization of their commercial applications. Here we report that the response time of a bismuth and magnesium co-doped lithium niobate (LN:Bi,Mg) crystal is shortened to 7.2 ms and a sensitivity as high as 646 cm/J. The crystal was used to demonstrate a real-time holographic display with a refresh rate of 60 Hz, as that of the popular high-definition television. Moreover, the first-principles calculations indicate that the electron mobility while Bi occupying Nb-site is significantly greater than that in Li-site, which directly induces the fast response of LN:Bi,Mg crystals when the concentration of Mg is above its doping threshold.

Light-matter interaction has been dominated by Born-Oppenheimer approximation for centuries. Here the authors proposed a light-matter interaction mechanism beyond this approximation, proposing stimulated phonon polariton-mediated light-matter interaction, showing further understanding and applications in the fields of optics/photonics and condensed-matter physics.

Two-color lasing emission from an asymmetric structure, consisting of two dye-doped cholesteric liquid crystal (DD-CLC) layers separated by a transparent interlayer, is demonstrated. The DD-CLC mixtures have different reflection bands with long-wavelength band edges located at the green and red wavelengths of the visible spectrum, respectively. For the laser action, the CLC hosts provide the feedback, and the fluorescent laser dyes represent the active medium. When the stacked structure is optically pumped above the threshold, two simultaneous laser lines separated by 123 nm are observed at the long-wavelength band edges of the DD-CLC mixtures. The influence of an electric field on lasing behavior is also analyzed and discussed in terms of the reflection spectrum and laser action. The results show a reversible tuning of the reflection band, accompanied by a modification of the lasing characteristics under the application of an external field. Above a specific threshold voltage, one of the emission lines is suppressed and the other is conserved. With a further increase in the voltage, both laser emissions are entirely inhibited. The investigated structure demonstrates a simple technique to obtain an electrically tunable multi-wavelength laser, which might pave the way for a new generation of organic laser sources.

Abstract Compact terahertz (THz) functional devices are greatly sought after for high-speed wireless communication, biochemical sensing, and non-destructive inspection. However, controlled THz generation, along with transport and detection, has remained a challenge especially for chip-scale devices due to low-coupling efficiency and unavoidable absorption losses. Here, based on the topological protection of electromagnetic waves, we demonstrate nonlinear generation and topologically tuned confinement of THz waves in an engineered lithium niobate chip forming a wedge-shaped Su–Schrieffer–Heeger lattice. Experimentally measured band structures provide direct visualization of the THz localization in the momentum space, while robustness of the confined mode against chiral perturbations is also analyzed and compared for both topologically trivial and nontrivial regimes. Such topological control of THz waves may bring about new possibilities in the realization of THz integrated circuits, promising for advanced photonic applications.

Actin cytoskeleton plays crucial roles in various cellular functions. Extracellular matrix (ECM) can modulate cell morphology by remodeling the internal cytoskeleton. To define how geometry of ECM regulates the organization of actin cytoskeleton, we plated individual NIH 3T3 cells on micropatterned substrates with distinct shapes and sizes. It was found that the stress fibers could form along the nonadhesive edges of T-shaped pattern, but were absent from the opening edge of V-shaped pattern, indicating that the organization of actin cytoskeleton was dependent on the mechanical environment. Furthermore, a secondary actin ring was observed on 50[Formula: see text][Formula: see text]m circular pattern while did not appear on 30[Formula: see text][Formula: see text]m and 40[Formula: see text][Formula: see text]m pattern, showing a size-dependent organization of actin cytoskeleton. Finally, osteoblasts, MDCK and A549 cells exhibited distinct organization of actin cytoskeleton on T-shaped pattern, suggesting a cell-type specificity in arrangement of actin cytoskeleton. Together, our findings brought novel insight into the organization of actin cytoskeleton on micropatterned environments.

Abstract Metasurfaces have proven themselves an exotic ability to harness light at nano-scale, being important not only for classical but also for quantum optics. Dynamic manipulation of the quantum states is at the heart of quantum information processing; however, such function has been rarely realized with metasurfaces so far. Here, we report an all-optical dynamic modulation of the photonic quantum states using the nonlinear metasurface. The metasurface consists of a metallic nanostructure combined with a photoisomerizable azo layer. By tuning the plasmonic resonance through optically switching the azo molecules between their binary isomeric states, we have realized dynamic control of transmission efficiencies of orthogonally polarized photons and also the phase delay between them, thereby an entangled state was efficiently controlled. As an illustration, a quantum state distillation has been demonstrated to recover a Bell state from a non-maximally entangled one to that with fidelities higher than 98%. Our work would enrich the functions of the metasurface in the quantum world, from static to dynamic modulation, making the quantum metasurface going practical.

Acoustic graphene plasmons (AGPs) hold promise for nanophotonics and sensing applications. Here, the authors observe enhanced in-plane scattering of mid-infrared AGPs caused by atomic steps on the substrate surface, suggesting potential strategies for controlling their propagation via substrate engineering.

Abstract We designed a simple on-chip integrated optical isolator made up of a metal–insulator–metal waveguide and a disc cavity filled with magneto-optical material to enhance the transverse magneto-optical effect through the coin paradox spin–orbit interaction (SOI). The simulation results of the non-reciprocal transmission properties of this optical structure show that a high-performance on-chip integrated optical isolator is obtained. The maximum isolation ratio is greater than 60 dB with a corresponding insertion loss of about 2 dB. The great performance of the optical isolator is attributed to the strong transverse magneto-optical effect, which is enhanced by the coin paradox SOI. Moreover, the enhancement of the transverse magneto-optical effect through the coin paradox SOI is more substantial for smaller azimuthal mode number n. Benefiting from this, the transverse magneto-optical effect remains strong in a wide wavelength range. Additionally, a smaller cavity has a stronger transverse magneto-optical effect in the same wavelength range. Our research provides a new perspective for creating highly integrated magneto-optical devices.

Summary: Podosomes, an important actin-based adhesive architecture, play critical roles in cell migration and matrix invasiveness. Here, we elucidate the ultrastructural organization and regulation of podosome clusters in primary macrophages. With three-dimensional stochastic optical reconstruction microscopy (3D-STORM), we achieve ∼20/50 nm (lateral/axial) spatial resolution to resolve the mutual localization of podosome core and ring components, and further show that microtubules pass through podosomes at the layer of myosin IIA. The microtubule disruption-caused podosome dissolution is previously ascribed to Rho/ROCK-myosin signaling, yet inhibiting this pathway with Y27632 or blebbistatin only partially recovers podosome assembly, thus suggesting the contribution of the physical supporting of microtubules in stabilizing podosome structures. Through improved substrate-coating technique, we further corroborate that the matrix-degrading capability of macrophages depends on the formation of podosome clusters. Together, 3D-STORM super-resolution microscopy reveals the nanoscale spatial arrangement and the microtubule-dependent regulation of the matrix-degrading podosome clusters in macrophages.

Abstract Higher-order topological insulators (HOTIs) are recently discovered topological phases, possessing symmetry-protected corner states with fractional charges. An unexpected connection between these states and the seemingly unrelated phenomenon of bound states in the continuum (BICs) was recently unveiled. When nonlinearity is added to the HOTI system, a number of fundamentally important questions arise. For example, how does nonlinearity couple higher-order topological BICs with the rest of the system, including continuum states? In fact, thus far BICs in nonlinear HOTIs have remained unexplored. Here we unveil the interplay of nonlinearity, higher-order topology, and BICs in a photonic platform. We observe topological corner states that are also BICs in a laser-written second-order topological lattice and further demonstrate their nonlinear coupling with edge (but not bulk) modes under the proper action of both self-focusing and defocusing nonlinearities. Theoretically, we calculate the eigenvalue spectrum and analog of the Zak phase in the nonlinear regime, illustrating that a topological BIC can be actively tuned by nonlinearity in such a photonic HOTI. Our studies are applicable to other nonlinear HOTI systems, with promising applications in emerging topology-driven devices.

Optical nonlinearity in the THz range is of interest for scientific applications. Here the authors show that THz nonlinearity in ionic crystals can be enhanced by orders of magnitude through phonon polaritons, which is also described by nonlinear modified Huang equations.

Abstract Ellipsometry is a powerful method for determining both the optical constants and thickness of thin films. For decades, solutions to ill-posed inverse ellipsometric problems require substantial human–expert intervention and have become essentially human-in-the-loop trial-and-error processes that are not only tedious and time-consuming but also limit the applicability of ellipsometry. Here, we demonstrate a machine learning based approach for solving ellipsometric problems in an unambiguous and fully automatic manner while showing superior performance. The proposed approach is experimentally validated by using a broad range of films covering categories of metals, semiconductors, and dielectrics. This method is compatible with existing ellipsometers and paves the way for realizing the automatic, rapid, high-throughput optical characterization of films.

We investigate the laser emission from a polymer–cholesteric liquid crystal superstructure with coexisting opposite chiralities fabricated by refilling a right-handed polymeric scaffold with a left-handed cholesteric liquid crystalline material. The superstructure exhibits two photonic band gaps corresponding to the right- and left-circularly polarized light. By adding a suitable dye, dual-wavelength lasing with orthogonal circular polarizations is realized in this single-layer structure. The wavelength of the left-circularly polarized laser emission is thermally tunable, while the wavelength of the right-circularly polarized emission is relatively stable. Due to its relative simplicity and tunability characteristics, our design might have broad application prospects in various fields of photonics and display technology.

Topological properties of materials are typically presented in momentum space. Here, the authors show a universal mapping of topological singularities from momentum to real space, potentially applicable to a wide range of systems.

Understanding and controlling the reflection phase picked up by graphene plasmons (GPs) upon scattering at graphene boundaries is a prerequisite for designing the GP propagation and the resonance properties of GPs in nanostructures. However, an efficient method that could continuously change the reflection phase of GPs in a wide range is still lacking. Here, we demonstrate that the reflection phase of GPs can be effectively controlled by electronic boundary design. Specifically, a Fabry–Pérot (F–P) cavity is constructed by two electronic boundaries and then acts as an equivalent reflection boundary. Theoretical results show that the reflection phase of GPs could continuously vary in a wide range, almost 2π, by simply changing the graphene Fermi energy and the width of the F–P cavity. Furthermore, the evolution of GP modes is obtained in the simulated scattering-type scanning near-field optical microscopy experiment, which verifies the feasibility of the reflection phase control by employing our configuration. This work not only paves a way for in-plane plasmon control but also could serve as a valuable reference to various graphene-based plasmonic applications.

In nonlinear optical systems, the optical superposition principle breaks down. The system’s response (including electric polarization, current density, etc) is not proportional to the stimulus it receives. Over the past half century, nonlinear optics has grown from an individual frequency doubling experiment into a broad academic field. The nonlinear optics has not only brought new physics and phenomena, but also has become an enabling technology for numerous areas that are vital to our lives, such as communications, health, advanced manufacturing, et al . This Roadmap surveys some of the recent emerging fields of the nonlinear optics, with a special attention to studies in China. Each section provides an overview of the current and future challenges within a part of the field, highlighting the most exciting opportunities for future research and developments.

Abstract Circular dichroism (CD) is an interesting phenomenon originating from the interaction of light with chiral molecules or other nanostructures lacking mirror symmetries in three-dimensional (3D) or two-dimensional (2D) space. While the observable effects of optical chirality are very weak in most of the natural materials, they can be designed and significantly enhanced in synthetic chiral structures, where the spatial symmetry of their component are broken on a nanoscale. Therefore, fabrication of composites capable of cheap, time-saving, and giant CD is desirable for the advanced optical technologies. Here, the giant CD of large-area metal nanocrescent array structures was investigated theoretically and experimentally. The largest value of the CD spectrum measured was larger than 0.5, and the CD spectrum was tuned effectively and extensively while maintaining a large peak intensity, which can be attributed to the selective excitation of the lattice surface modes (LSMs) by circularly polarized light. The analysis of the extrinsic chiral structure shows potential applications in chiral molecule sensing and polarizing imaging.

An on-chip optical diffractive neural network is built based on metasurfaces, which can recognize objects.

Abstract An optical diode structure with two dislocated parallel metallic gratings is proposed and investigated numerically. Dichroic optical diode transmission is realized in this structure, i.e., optical diode effect is observed in two wavebands corresponding to inverse transmission directions. In the structure, two parallel metallic gratings with different grating constants are separated by a dielectric slab in between. The first illuminated grating acts as a selector for exciting surface plasmons at a proper wavelength. The other grating acts as an emitter to realize optical transmission. When the incident direction is reversed, the roles of two gratings exchange and surface plasmons are excited at another wavelength. In dichroic transmission wavebands, the optical diode structure exhibits extraordinary transmission and possesses high optical isolation up to 1. Furthermore, the operating wavebands can be modulated by changing structure parameters.

In this work, the atomic oxygen (AO) erosion-resistance effect and mechanism of the Perhydropolysilazane (PHPS) coating were investigated from the perspective of element distribution in the depth direction. The results revealed that the coating demonstrated good adhesion and intrinsic AO erosion-resistance, which was attributed to the composition gradient formed in the coating. Moreover, the oxygen ratio of the SiOx on top layer of the coating could be elevated during AO exposure, strengthening the Ar ion etching durability of the coating. According to these results, an AO erosion-resistance mechanism model of the PHPS-derived SiOx coating was finally obtained.

Abstract In this work, we demonstrate the strong extrinsic chirality of the larger-area metal nanocrescents by experiments and simulations. Our results show that the metal nanocrescent exhibits giant and tunable circular dichroism (CD) effect, which is intensively dependent on the incident angle of light. We attribute the giant extrinsic chirality of the metal nanocrescent to the excitation efficiencies difference of localized surface plasmon resonance (LSPR) modes for two kinds of circularly polarized light at a non-zero incident angle. In experiment, the largest CD of 0.37 is obtained at the wavelength of 826 nm with the incident angle of 60°. Furthermore, the CD spectra can be tuned flexibly by changing the metal nanocrescent diameter. Benefitting from the simple, low-cost and mature fabrication process, the proposed large-area metal nanocrescents are propitious to application.

In order to realize unidirectional optical transmission (UOT), a single-layer metallic grating (SMG) consisting of cambered resonators (CRs) is proposed. Numerical simulation results show that the transmittance contrast ratio of the SMG can reach about 5000 with a high unidirectional transmittance of 39%. UOT results from diffraction enhancement or suppression in transmission direction. Diffraction is manipulated by the interference of electromagnetic radiation from local surface plasmons on CRs. Our single-layer structure has sub-100 nm thickness and can be used in ultracompact optical devices to manipulate light transmission.

An all-fiber acousto-optic frequency shifter (AOFS) based on an acousto-optic tunable filter (AOTF) cascaded with a packaged tapered fiber (TF)-coupled microsphere was proposed and demonstrated in both theory and experiment. The configuration has the advantages of easy alignment, robustness, compact size, and low cost, which will improve its further application, such as in the optical heterodyne detection technique (OHDT).

Abstract Cherenkov radiation is a ubiquitous phenomenon in nature. It describes electromagnetic radiation from a charged particle moving in a medium with a uniform velocity larger than the phase velocity of light in the same medium. Such a picture is typically adopted in the investigation of traditional Cherenkov radiation as well as its counterparts in different branches of physics, including nonlinear optics, spintronics and plasmonics. In these cases, the radiation emitted spreads along a “cone”, making it impractical for most applications. Here, we employ a self-accelerating optical pump wave-packet to demonstrate controlled shaping of one type of generalized Cherenkov radiation - dispersive waves in optical fibers. We show that, by tuning the parameters of the wave-packet, the emitted waves can be judiciously compressed and focused at desired locations, paving the way to such control in any physical system.

Abstract We report a theoretical and experimental study of coupling between a whispering-gallery-mode (WGM) microdisk resonator and a fiber taper which exchange energies at two distinct regions. We observe an oscillatory behavior in the coupling strength as a function of the distance between the two coupling regions when a fiber taper is moved laterally above the resonator at fixed vertical distance. This oscillation is clearly seen in the linewidth of the resonance as well as in the on-resonance transmission. A theoretical model considering for two-point coupling successfully explains the experimental observations as being a result of the interference between the light fields coupled into and out of the resonator at two distinct regions and the light transmitted through the waveguide. Critical coupling in two-region coupling is a collective result of the coupling at two different coupling regions, and does not require critical coupling at both or at any one of the two coupling regions. This relaxes the conditions for achieving critical coupling in waveguide-resonator systems. The discovery of this previously unnoticed oscillatory behavior in two-region coupling between a WGM resonator and a waveguide will benefit both fundamental studies and practical applications based on WGM resonators.

Abstract A novel LiNbO3 (lithium niobate, LN) electro-optic (EO) Q-switch that can independently operate in the pulse-on regime without the assistance of a quarter-wave plate (QWP) or analyzer was designed and demonstrated. By theoretical analysis and calculations, the proper orientation of the LN was determined to be θ = 1.7° and φ = ±45°, and the quarter-wave voltage was identical to that of a conventional LN EO Q-switch. Additionally, the possible influences caused by the small angular variation between the wave normal and optic axis were found to be negligible. To the best of our knowledge, this is the first time that a LN crystal has been (xztw)-1.2°/1.2°-cut and used successfully in a pulse-on cavity without using a QWP or analyzer. The performance of the novel Q-switched laser and its temperature dependence were verified to be almost identical to those of a conventional pulse-on LN EO Q-switched laser, which strongly demonstrates the practicability of our novel Q-switch. This novel Q-switch design enables a more compact, lossless and stable laser cavity, which is of great concern for engineering applications.

Abstract Spectral resolving and imaging surface plasmon modes in noble metal nanostructures are important for applications in nanophotonics. Here, we use cathodoluminescence (CL) spectroscopy to excite and probe quasi-dark plasmon modes of Au nanoring cavities. Numerical simulations of both the spectra and the electromagnetic field distribution are carried out by using boundary element method. Good agreement between the experimental and simulated results is obtained. Particularly, CL is shown as an efficient method to probe quadrupole modes, which is difficult for traditional optical means. Moreover, a high Purcell factor in excess of 100 is obtained for the dark quadrupole modes in gold ring cavities. Our work provides an efficient way to explore the initial nature of surface plasmon modes in metal nanostructures.

Abstract The dynamic response of the cell to osmotic changes is critical to its physiology and is widely exploited for cell manipulation. Here, using three‐dimensional stochastic optical reconstruction microscopy (3D‐STORM), a super‐resolution technique, the hypotonic stress‐induced ultrastructural changes of the cytoskeleton of a common fibroblast cell type are examined. Unexpectedly, these efforts lead to the discovery of a fast, yet reversible dissolution of the vimentin intermediate filament system that precedes ultrastructural changes of the supposedly more dynamic actin and tubulin cytoskeletal systems as well as changes in cell morphology. In combination with calcium imaging and biochemical analysis, it is shown that the vimentin‐specific fast cytoskeletal degradation under hypotonic stress is due to proteolysis by the calcium‐dependent protease calpain. The process is found to be activated by the hypotonic stress‐induced calcium release from intracellular stores, and is therefore efficiently suppressed by inhibiting any part of the IP3‐Ca2+‐calpain pathway established in this study. Together, these findings highlight an unexpected, fast degradation mechanism for the vimentin cytoskeleton in response to external stimuli, and point to the significant, yet previously overlooked physiological impacts of hypotonic stress‐induced intracellular calcium release on cell ultrastructure and function.

We design and demonstrate what we called shape-preserving “optical pin beams” (OPBs) that possess stable wavefronts against diffraction and ambient turbulence during free-space long distance propagation. Theoretically, we show that a laser beam passing through properly assembled phase elements paired with opposite transverse wavevectors can morph quickly into a stable optical field, exhibiting “self-focusing” dynamics during propagation without optical nonlinearity. The overall shape of such OPBs remains invariant, while their width can in principle be inversely proportional to the propagation distance, in contradistinction to conventional Bessel beams and radially symmetric Airy beams. Experimentally, utilizing a single photoetched mask, we demonstrate efficient generation and robust propagation of the OPB through atmospheric turbulence beyond kilometer distances. We envisage exciting opportunities arising from such OPBs, especially when propagation through turbulent environments is unavoidable.

We demonstrate optical sharply bending beams under the paraxial condition. The curved path followed by these beams arises from the intersection of geometrical rays nearly parallel to the optical axis rather than the envelope of a bundle of tangential rays, whereby conventional bending beams were routinely designed. Compared with Airy beams, such sharply bending beams can turn at a much larger angle, and, surprisingly, exhibit an expedited self-healing process especially when they encounter an obstacle farther away. Furthermore, a simple method to preset the beam path is put forward, leading to free-space active routing of laser peak intensity even to 90° along circular and elliptical trajectories of macroscale. Our approach can be exploited to design sharply curved wave-packets in other physical systems.

As the indispensable oxygen-transporting cells, erythrocytes exhibit extreme deformability and amazing stability as they are subject to huge reversible shear stress and extrusion force during massive circulation in the body. The unique architecture of spectrin-actin-based membrane-skeleton is considered to be responsible for such excellent mechanical properties of erythrocytes. Although erythrocytes have been recognized for more than 300 years, myriad questions about membrane-skeleton constantly attract people’s attention. Here, we summarize the kinds of distinctive single-cell and single-molecule techniques that were used to investigate the structure and function of erythrocyte membrane-skeleton at macro and micro levels.

The authors wish to make the following corrections to this paper [...]

We proposed a two-step poling technique to fabricate nanoscale domains based on the anti-parallel polarization reversal effect in lithium niobate on insulator (LNOI). The anti-parallel polarization reversal is observed when lithium niobate thin film in LNOI is poled by applying a high voltage pulse through the conductive probe tip of atomic force microscope, which generates a donut-shaped domain structure with its domain polarization at the center being anti-parallel to the poling field. The donut-shaped domain is unstable and decays with a time scale of hours. With the two-step poling technique, the polarization of the donut-shaped domain can be reversed entirely, producing a stable dot domain with a size of tens of nanometers. Dot domains with diameter of the order of ∼30 nm were fabricated through the two-step poling technique. The results may be beneficial to domain-based applications such as ferroelectric domain memory.

We present a simple and effective way to improve the thermal stability of nano-domains written with an atomic force microscope (AFM)-tip voltage in a lithium niobate film on insulator (LNOI). We show that nano-domains in LNOI (whether in the form of stripe domains or dot domains) degraded, or even disappeared, after a post-poling thermal annealing treatment at a temperature on the order of ∼100 ∘ C. We experimentally confirmed that the thermal stability of nano-domains in LNOI is greatly improved if a pre-heat treatment is carried out for LNOI before the nano-domains are written. This thermal stability improvement of nano-domains is mainly attributed to the generation of a compensating space charge field parallel to the spontaneous polarization of written nano-domains during the pre-heat treatment process.

We grew a set of indium and molybdenum co-doped lithium niobate crystals with various indium doping concentrations and investigated their photorefractive properties at different wavelengths (442, 488 and 532 nm). It was found that the diffraction efficiency of 1.0 mol% indium and 0.5 mol% molybdenum co-doped lithium niobate crystal could reach 61.57% at 488 nm. Moreover for 3.0 mol% indium and 0.5 mol% molybdenum co-doped lithium niobate crystal, the response time was greatly shortened to 0.61, 0.76, and 0.74 s at 442, 488, and 532 nm, respectively, while the photorefractive sensitivity reached as high as 7.35 cm/J at 442 nm. These results indicate that co-doping of indium is an efficient way to further enhance the photorefractive properties of molybdenum-doped lithium niobate crystal.

Nerve injury is accompanied by a liberation of diverse nucleotides, some of which act as 'find/eat-me' signals in mediating neuron-glial interplay. Intercellular Ca2+ wave (ICW) communication is the main approach by which glial cells interact and coordinate with each other to execute immune defense. However, the detailed mechanisms on how these nucleotides participate in ICW communication remain largely unclear. In the present work, we employed a mechanical stimulus to an individual BV-2 microglia to simulate localized injury. Remarkable ICW propagation was observed no matter whether calcium was in the environment or not. Apyrase (ATP/ADP-hydrolyzing enzyme), suramin (broad-spectrum P2 receptor antagonist), 2-APB (IP3 receptor blocker) and thapsigargin (endoplasmic reticulum calcium pump inhibitor) potently inhibited these ICWs, respectively, indicating the dependence of nucleotide signals and P2Y receptors. Then, we detected the involvement of five naturally occurring nucleotides (ATP, ADP, UTP, UDP and UDP-glucose) by desensitizing receptors. Results showed that desensitization with ATP and ADP could block ICW propagation in a dose-dependent manner, whereas other nucleotides had little effect. Meanwhile, the expression of P2Y receptors in BV-2 microglia was identified and their contributions were analyzed, from which we suggested P2Y12/13 receptors activation mostly contributed to ICWs. Besides, we estimated that extracellular ATP and ADP concentration sensed by BV-2 microglia was about 0.3 μM during ICWs by analyzing calcium dynamic characteristics. Taken together, these results demonstrated that the nucleotides ATP and ADP were predominant signal transmitters in mechanical stimulation-induced ICW communication through acting on P2Y12/13 receptors in BV-2 microglia.

A nanoscale resonator composed of two metal-insulator-metal (MIM) waveguides and a split ring is investigated numerically. The multipolar plasmonic resonance modes can be excited, weakened, or even cut off by adjusting the split angle. These novel phenomena are due to the electric polarization in the split area. Odd modes exhibit when the electric field is polarized perpendicular to the split. The resonator acts as a LC circuit for the electric field polarized parallel to the split, in which even modes are excited. The capacitance diminished when the split depth is increased, and the resonance wavelengths of even modes exhibit blue shift. Our results imply an extensive potential for tunable multichannel filters and biosensor devices in integrated nano-optics.

A series of mono-, double-, and tri-doped LiNbO3 crystals with vanadium were grown by Czochralski method, and their photorefractive properties were investigated. The response time for 0.1 mol% vanadium, 4.0 mol% zirconium, and 0.03 wt.% iron co-doped lithium niobate crystal at 488 nm was shortened to 0.53 s, which is three orders of magnitude shorter than the mono-iron-doped lithium niobate, with a maintained high diffraction efficiency of 57% and an excellent sensitivity of 9.2 cm/J. The Ultraviolet-visible (UV-Vis) and OH− absorption spectra were studied for all crystals tested. The defect structure is discussed, and a defect energy level diagram is proposed. The results show that vanadium, zirconium, and iron co-doped lithium niobate crystals with fast response and a moderately large diffraction efficiency can become another good candidate material for 3D-holographic storage and dynamic holography applications.

A series of heavily Fe-doped LiNbO3 (LN:Fe) crystals were grown via the Czochralski method. The dark- and photo-conductivity of the 5.0 wt.% Fe-doped LiNbO3 crystal reached 3.30 × 10−8 Ω−1 cm−1 and 1.46 × 10−7 Ω−1 cm−1 at 473 nm, which are about 7 and 5 orders of magnitude higher than that of congruent LiNbO3, respectively. Then, a p-n heterojunction was fabricated by depositing the heavily Fe-doped LiNbO3 on a p-type Si substrate using the pulsed laser deposition. The current−voltage curve of the LN:Fe/Si heterojunction presents a well-defined behavior with a turn-on voltage of 2.9 V. This LN:Fe/Si heterojunction gives an excellent prototype device for integrated optics and electro-photonics.