Search

In this study, microcapsules are combined with electroluminescent devices. When the microcapsules are subjected to a certain external force, the core material is crushed and overflows, so that the devices emit light at the corresponding position.

Gratzel's dye-sensitized solar cells (DSSCs) can readily convert sunlight into electricity, attracting considerable attention of global scientists. The fabrication efficiency of DSSCs was greatly limited by the slow fabrication (∼3.5-24 h) of quasi-solid (QS) electrolytes to date. In this study, novel composites of SiO2 aerogel with graphene (GR), multi-walled carbon nanotubes, or polyaniline were proposed in the fabrication of QS-state electrolytes. The morphology of these composites was characterized. The gels with SiO2 aerogels as QS electrolytes of DSSCs can be rapidly cured in ∼3 s. Using the screen-printing technology, these QS electrolytes can be readily utilized to construct the QS-DSSC to provide high efficiency and great stability. The photovoltaic parameters and interfacial charge-transfer resistances of the QS-DSSC incorporated with our synthetic composites were investigated in detail. Specifically, the SiO2 aerogel composed of GR (SiO2@GR) as a gel can greatly improve the performance of QS-DSSCs up to 8.25%. It is likely that these SiO2 aerogel composite electrolytes could provide a rapid curing process in the preparation of QS-state DSSCs, which might be useful to promote the development of DSSCs for future industrialization.

As a typical plant virus which has biocompatibility and high transfection efficiency, tobacco mosaic virus (TMV) has shown broad application potential in drug or gene delivery field. Elucidating its intracellular trafficking is of great importance in investigation of its cytotoxicity, targeting site, and delivery efficiency, and is advantageous to designing new TMV-based drug delivery systems with different targets. By taking advantage of the regulated pH value of different organelles in a mammalian cell, we exploit a pH detection strategy to investigate the intracellular trafficking pathway of TMV. Here, we report a single-wavelength excited ratiometric fluorescent pH probe. This probe is constructed by simultaneously coupling pH-sensitive fluorescein isothiocyanate (FITC) and pH-insensitive rhodamine B isothiocyanate (RBIRC) onto the inner surface of TMV. The fluorescence intensity ratio of FITC to RBITC excited at 488 nm responds specifically towards pH value over other interferential agents. By taking use of this single-wavelength excited ratiometric pH probe and confocal laser scanning microscopy, it is shown that the endocytosed TMV is located in a pH decreasing microenvironment and eventually enters lysosomes. This work may provide important guidance on construction of TMV-based nano carriers.

Surface-modified thermally expandable microcapsules (TEMs) hold potential for applications in various fields. In this work, we discussed the possible surface coating mechanism and reported the properties of TEMs coated with polyaniline (PANI) and polydisperse graphene oxide sheets (ionic liquid-graphene oxide hybrid nanomaterial (ILs-GO)). The surface coating of PANI/ ILs-GO increased the corresponding particle size and its distribution range. The morphologies analyzed by scanning electron microscopy indicated that no interfacial gap was observed between the microspheres ink and substrate layer during the substrate application. The thermal properties were determined by thermogravimetric and differential thermal analyses. The addition of ILs-GO to the polyaniline coating significantly improved the thermal expansion and thermal conductivity of the microcapsules. The evaporation of hexane present in the core of TEMs was not prevented by the coating of PANI/ ILs-GO. The printing application of TEMs showed excellent adaptability to various flexible substrates with great 3D appearance. By incorporating a flame retardant agent into TEMs coated by PANI/ILs-GO, finally, these TEMs also demonstrated a great flame retardant ability. We expect that these TEM-coated PANI/ ILs-GO are likely to have the potential to improve the functional properties for various applications.

Phase change microcapsule refers to embedding phase change material as core material in the polymer wall material, and the latent heat possessed by the phase change material can be used to store and release. Meanwhile, phase change inks can be obtained by combining the microcapsules with inks in a certain proportion. In this study, phase change microcapsules with paraffin as the core material and melamine-formaldehyde resin as the wall material were synthesized by in-situ polymerization. The structure and performance of phase change microcapsules were characterized by differential scanning calorimetry and scanning electron microscope. At the same time, the phase change inks were obtained by formulating phase change microcapsules, binders, colorants and other materials at a certain ratio, and the printability of microcapsule inks was studied. The results show that the phase change microcapsules have good heat storage performance, and the phase change inks can be transferred to the surfaces of different flexible substrates by screen printing process. Finally, the functional printed products with phase change thermal insulation and patterning effects were obtained.

Functional microcapsule refers to a small container in which solid, liquid or gas are wrapped by natural or synthetic polymer materials to form a core-shell structure. Meanwhile, the corresponding functional ink can be obtained by combining functional microcapsule with ink. In this study, thermal expansion and aromatic slow-release functional microcapsules were formulated at a certain ratio with colorants and binders to obtain a composite microsphere ink with aromatic expansion effects. Based on this, the functional microcapsule ink is transferred to five kinds of different flexible printing substrates such as cotton, non-woven fabric, kraft paper, offset paper and coated paper by screen printing, and the impact of binder on ink printability is mainly investigated. Moreover, the surface morphology, foaming height, adhesion of printed products and thermal stability of printing ink were characterized by laser confocal microscope, thickness gauge and thermogravimetric analyzer. At the same time, the printing effects of functional microcapsule ink on different substrates were evaluated and the ink formula was adjusted. Finally, a functional printed product with long-lasting fragrance and three-dimensional effect is obtained.

The fabrication of desired anti-magnetic materials for irradiation shielding remains a challenge to date. In this work, a new type of dual-functional magnetic shielding phase change microcapsules with paraffin as the core, melamine-formaldehyde (MF) resin as the shell and doped with magnetic particles in the shell were successfully prepared by in situ polymerization. The magnetic particles were dispersed in the shell layer by coating a hydrophilic emulsifier on the surface. These microcapsules were specifically applied to the field of magnetic shielding by the screen printing method. The effect of magnetic particles on the performance of phase-change microcapsules was examined by differential scanning calorimetry and thermogravimetric analyses. The magnetic type and magnetic strength of the microcapsules were studied by the vibrating sample magnetometer. Moreover, the effects of different magnetic particles (Fe3 O4 , CrO2 ) on the performance of phase change microcapsules and the magnetic strength of microcapsules were compared. The results showed that these two kinds of magnetic particles can greatly improve the phase change latent heat, thermal stability, and thermal conductivity of the microcapsules. Finally, the great magnetic shielding role of these microcapsules was demonstrated in both static and pulsed magnetic fields through the screen printing of magnetic shielding ink on wallpaper. Incorporating 0.5 g Fe3 O4 inside of microcapsules, specifically, the magnetic intensity was effectively reduced by ∼250 Oe within a short distance in the static field. We expect that these magnetic microcapsules hold great potential for the shielding of irradiations via the screen printing on various substrates.

Grätzel's dye-sensitized solar cells (DSSCs) can readily convert sunlight into electricity, attracting considerable attention of global scientists. The fabrication efficiency of DSSCs was greatly limited by the slow fabrication (∼3.5-24 h) of quasi-solid (QS) electrolytes to date. In this study, novel composites of SiO

Dye-sensitized solar cells (DSSCs) have the advantages of low cost, long life and no pollution. In recent years, DSSCs have rapidly developed into solar cells with commercial application prospects. Photoanodes have a critical impact on the performance of DSSCs. In this paper, photoanodes were prepared by screen printing. The size of titanium oxide, number of screen printing layers, mesh number in photoanode were studied. The surface thickness was observed by laser confocal microscopy, and the most suitable screen printing conditions were selected according to the photoelectric conversion efficiency of dye-sensitized solar cells. The researchon the preparation of DSSCs by screen printing provides an effective way for large-area industrial preparation of DSSCs.

Thermal expansion microcapsules (TEMs) are widely used in various fields due to their unique structures. In recent years, TEMs have attracted much attention and have broad market application prospects. In this study, thermally expandable microcapsules with a core–shell structure were prepared by suspension polymerization using acrylonitrile (AN), methyl methacrylate (MMA), and methyl acrylate (MA) as monomers and low-boiling alkane as the core material. Through particle size analysis, morphology test, thermal analysis and other methods, the effects of core material types, single core material and mixed core material, dispersion system on the microcapsule structure, particle size distribution, and expansion properties were compared. Moreover, the core material with a content of 35% can make the expansion ratio of the microcapsules up to 4 times. The expansion performance of the microcapsules with a mixture of isopentane and isooctane (ratio 1:1) as the core material was increased by 27% compared with that of a single core material. In addition, comparing with colloidal SO2/PVP dispersant, the expansion ratio of the microcapsules with magnesium hydroxide as the dispersant was increased by 20%. Finally, the optimized method for preparing thermally expandable microcapsules was obtained.