Search

Nanoparticle tracking analysis (NTA) is a single particle tracking technique that in principle provides a more direct measure of particle size distribution compared to dynamic light scattering (DLS). Here, we demonstrate how statistical mixture distribution analysis can be used in combination with NTA to quantitatively characterize the amount and extent of particle binding in a mixture of nanomaterials. The combined approach is used to study the binding of gold nanoparticles to two types of phospholipid vesicles, those containing and lacking the model ion channel peptide gramicidin A. This model system serves as both a proof of concept for the method and a demonstration of the utility of the approach in studying nano-bio interactions. Two diffusional models (Stokes-Einstein and Kirkwood-Riseman) were compared in the determination of particle size, extent of binding, and nanoparticle:vesicle binding ratios for each vesicle type. The combination of NTA and statistical mixture distributions is shown to be a useful method for quantitative assessment of the extent of binding between particles and determination of binding ratios.

Gold nanoparticles are versatile materials for biological applications because their properties can be modulated by assembling ligands on their surface to form monolayers. However, the physicochemical properties and behaviors of monolayer-protected nanoparticles in biological environments are difficult to anticipate because they emerge from the interplay of ligand-ligand and ligand-solvent interactions that cannot be readily inferred from ligand chemical structure alone. In this work, we demonstrate that quantitative nanostructure-activity relationship (QNAR) models can employ descriptors calculated from molecular dynamics simulations to predict nanoparticle properties and cellular uptake. We performed atomistic molecular dynamics simulations of 154 monolayer-protected gold nanoparticles and calculated a small library of simulation-derived descriptors that capture nanoparticle structural and chemical properties in aqueous solution. We then parametrized QNAR models using interpretable regression algorithms to predict experimental measurements of nanoparticle octanol-water partition coefficients, zeta potentials, and cellular uptake obtained from a curated database. These models reveal that simulation-derived descriptors can accurately predict experimental trends and provide physical insight into what descriptors are most important for obtaining desired nanoparticle properties or behaviors in biological environments. Finally, we demonstrate model generalizability by predicting cell uptake trends for 12 nanoparticles not included in the original data set. These results demonstrate that QNAR models parametrized with simulation-derived descriptors are accurate, generalizable computational tools that could be used to guide the design of monolayer-protected gold nanoparticles for biological applications without laborious trial-and-error experimentation.

The relative abundance of sulfoquinovosyl diacylglycerol (SQDG) in model chloroplast membranes dictates both the affinity for and capacity of the membrane to interact with positively charged carbon nanodots (CNDs).

The study reveals that the interaction with cations, colloidal stability and transport behavior of MoS2 rely on its phase compositions and geometric structures.

Aggregation significantly influences the transport, transformation, and bioavailability of engineered nanomaterials. Two-dimensional MoS2 nanosheets are one of the most well-studied transition-metal dichalcogenide nanomaterials. Nonetheless, the aggregation behavior of this material under environmental conditions is not well understood. Here, we investigated the aggregation of single-layer MoS2 (SL-MoS2) nanosheets under a variety of conditions. Trends in the aggregation of SL-MoS2 are consistent with classical Derjaguin-Landau-Verwey-Overbeek (DLVO) colloidal theory, and the critical coagulation concentrations of cations follow the order of trivalent (Cr3+) < divalent (Ca2+, Mg2+, Cd2+) < monovalent cations (Na+, K+). Notably, Pb2+ and Ag+ destabilize MoS2 nanosheet suspensions much more strongly than do their divalent and monovalent counterparts. This effect is attributable to Lewis soft acid-base interactions of cations with MoS2. Visible light irradiation synergistically promotes the aggregation of SL-MoS2 nanosheets in the presence of cations, which was evident even in the presence of natural organic matter. The light-accelerated aggregation was ascribed to dipole-dipole interactions due to transient surface plasmon oscillation of electrons in the metallic 1T phase, which decrease the aggregation energy barrier. These results reveal the phase-dependent aggregation behaviors of engineered MoS2 nanosheets with important implications for environmental fate and risk.

A mechanistic understanding of the influence of the surface properties of engineered nanomaterials on their interactions with cells is essential for designing materials for applications such as bioimaging and drug delivery as well as for assessing nanomaterial safety. Ligand-coated gold nanoparticles have been widely investigated because their highly tunable surface properties enable investigations into the effect of ligand functionalization on interactions with biological systems. Lipophilic ligands have been linked to adverse biological outcomes through membrane disruption, but the relationship between ligand lipophilicity and membrane interactions is not well understood. Here, we use a library of cationic ligands coated on 2 nm gold nanoparticles to probe the impact of ligand end group lipophilicity on interactions with supported phosphatidylcholine lipid bilayers as a model for cytoplasmic membranes. Nanoparticle adsorption to and desorption from the model membranes were investigated by quartz crystal microbalance with dissipation monitoring. We find that nanoparticle adsorption to model membranes increases with ligand lipophilicity. The effects of ligand structure on gold nanoparticle attachment were further analyzed using atomistic molecular dynamics simulations, which showed that the increase in ligand lipophilicity promotes ligand intercalation into the lipid bilayer. Together, the experimental and simulation results could be described by a two-state model that accounts for the initial attachment and subsequent conversion to a quasi-irreversibly bound state. We find that only nanoparticles coated with the most lipophilic ligands in our nanoparticle library undergo conversion to the quasi-irreversible state. We propose that the initial attachment is governed by interaction between the ligands and phospholipid tail groups, whereas conversion into the quasi-irreversibly bound state reflects ligand intercalation between phospholipid tail groups and eventual lipid extraction from the bilayer. The systematic variation of ligand lipophilicity enabled us to demonstrate that the lipophilicity of cationic ligands correlates with nanoparticle-bilayer adsorption and suggested that changing the nonpolar ligand R group promotes a mechanism of ligand intercalation into the bilayer associated with irreversible adsorption.

Biomolecular coatings (coronas) that form on nanomaterials have been widely investigated in animal and bacterial cell culture and in the extracellular and intracellular fluids of animals. Such coronas influence the distribution of nanoparticles within organisms, their uptake by cells, and their storage in intracellular compartments. Plants can be exposed to nanoparticles via either intentional application of nanomaterials in agriculture or inadvertently due, for example, to biosolids amendment of soils. Development of a mechanistic understanding of nanoparticle transport and fate within plants requires consideration of corona acquisition within plants, particularly within the vascular fluids that transport nanoparticles throughout plants. Here, we examine the interactions between copper oxide (CuO) nanoparticles and pumpkin xylem fluid to understand corona formation in an important part of the plant vasculature system. We used CuO nanoparticles because they have emerged as a promising micronutrient source for the suppression of fungal diseases. The corona was composed primarily of proteins, despite the higher abundance of carbohydrates in xylem fluid. We used X-ray photoelectron spectroscopy to determine the thickness of the protein corona. Polyacrylamide gel electrophoresis revealed that protein binding to the CuO nanoparticle surface was selective; the most abundant proteins in the corona were not the most abundant ones in the xylem fluid. We used in situ attenuated total reflectance Fourier-transform infrared spectroscopy to show that the protein–CuO NP interactions were quasi-irreversible, while carbohydrate–CuO interactions were reversible. Corona formation is expected to influence the distribution and transformation of nanomaterials in plants.

Understanding the mechanisms of nanoparticle interaction with cell membranes is essential for designing materials for applications such as bioimaging and drug delivery, as well as for assessing engineered nanomaterial safety. Much attention has focused on nanoparticles that bind strongly to biological membranes or induce membrane damage, leading to adverse impacts on cells. More subtle effects on membrane function mediated via changes in biophysical properties of the phospholipid bilayer have received little study. Here, we combine electrophysiology measurements, infrared spectroscopy, and molecular dynamics simulations to obtain insight into a mode of nanoparticle-mediated modulation of membrane protein function that was previously only hinted at in prior work. Electrophysiology measurements on gramicidin A (gA) ion channels embedded in planar suspended lipid bilayers demonstrate that anionic gold nanoparticles (AuNPs) reduce channel activity and extend channel lifetimes without disrupting membrane integrity, in a manner consistent with changes in membrane mechanical properties. Vibrational spectroscopy indicates that AuNP interaction with the bilayer does not perturb the conformation of membrane-embedded gA. Molecular dynamics simulations reinforce the experimental findings, showing that anionic AuNPs do not directly interact with embedded gA channels but perturb the local properties of lipid bilayers. Our results are most consistent with a mechanism in which anionic AuNPs disrupt ion channel function in an indirect manner by altering the mechanical properties of the surrounding bilayer. Alteration of membrane mechanical properties represents a potentially important mechanism by which nanoparticles induce biological effects, as the function of many embedded membrane proteins depends on phospholipid bilayer biophysical properties.

Nanotechnology offers potential solutions for sustainable agriculture, including increasing nutrient utilization efficiency, improving the efficacy of pest management, mitigating the impacts of climate change, and reducing adverse environmental impacts of agricultural food production. Many promising nanotechnologies have been proposed and evaluated at different scales, but several barriers to implementation must be addressed for technology to be adopted, including efficient delivery at field scale, regulatory and safety concerns, and consumer acceptance. Here we explore these barriers, and rank technology readiness and potential impacts of a wide range of agricultural applications of nanotechnology. We propose pathways to overcome these barriers and develop effective, safe and acceptable nanotechnologies for agriculture. Nanotechnology holds great application potential in plant agriculture. This Review Article identifies the technological readiness, addresses the primary barriers to adopting nano-enabled technologies and proposes a roadmap to advance nanotechnology-enabled agriculture.

The composition, orientation, and conformation of proteins in biomolecular coronas acquired by nanoparticles in biological media contribute to how they are identified by a cell. While numerous stud...

The interaction of lipopolysaccharides (LPS) with metal cations strongly affects the stability and function of the Gram-negative bacterial outer membrane. The sensitivity of deep rough (Re) LPS packing and function to the ionic environment, as affected by cation valency and ionic radius, has been determined using molecular dynamics simulations and Langmuir balance experiments. The degree of LPS aggregation within the LPS models in the presence of different cations is assessed by measuring the effective mean molecular area (

The initial interactions of engineered nanoparticles (NPs) with living cells are governed by physicochemical properties of the NP and the molecular composition and structure of the cell membrane. Eukaryotic cell membranes contain lipid rafts – liquid-ordered nanodomains involved in membrane trafficking and molecular signaling. However, the impact of these membrane structures on cellular interactions of NPs remains unclear. Here we investigate the role of membrane domains in the interactions of primary amine-terminated quantum dots (Qdots) with liquid-ordered domains or lipid rafts in model membranes and intact cells, respectively. Using correlative atomic force and fluorescence microscopy, we found that the Qdots preferentially localized to boundaries between liquid-ordered and liquid-disordered phases in supported bilayers. The Qdots also induced holes at these phase boundaries. Using super resolution fluorescence microscopy (STORM), we found that the Qdots preferentially co-localized with lipid rafts in the membrane of intact trout gill epithelial cells – a model cell type for environmental exposures. Our observations uncovered preferential interactions of amine-terminated Qdots with liquid-ordered domains and their boundaries, possibly due to membrane curvature at phase boundaries creating energetically favorable sites for NP interactions. The preferential interaction of the Qdots with lipid rafts supports their potential internalization via lipid raft-mediated endocytosis and interactions with raft-resident signaling molecules.

The molecular features that dictate interactions between functionalized nanoparticles and biomolecules are not well understood. This is in part because for highly charged nanoparticles in solution, establishing a clear connection between the molecular features of surface ligands and common experimental observables such as ζ potential requires going beyond the classical models based on continuum and mean field models. Motivated by these considerations, molecular dynamics simulations are used to probe the electrostatic properties of functionalized gold nanoparticles and their interaction with a charged peptide in salt solutions. Counterions are observed to screen the bare ligand charge to a significant degree even at the moderate salt concentration of 50 mM. As a result, the apparent charge density and ζ potential are largely insensitive to the bare ligand charge densities, which fall in the range of ligand densities typically measured experimentally for gold nanoparticles. While this screening effect was predicted by classical models such as the Manning condensation theory, the magnitudes of the apparent surface charge from microscopic simulations and mean-field models are significantly different. Moreover, our simulations found that the chemical features of the surface ligand (e.g., primary vs. quaternary amines, heterogeneous ligand lengths) modulate the interfacial ion and water distributions and therefore the interfacial potential. The importance of interfacial water is further highlighted by the observation that introducing a fraction of hydrophobic ligands enhances the strength of electrostatic binding of the charged peptide. Finally, the simulations highlight that the electric double layer is perturbed upon binding interactions. As a result, it is the bare charge density rather than the apparent charge density or ζ potential that better correlates with binding affinity of the nanoparticle to a charged peptide. Overall, our study highlights the importance of molecular features of the nanoparticle/water interface and underscores a set of design rules for the modulation of electrostatic driven interactions at nano/bio interfaces.

Molecular-level understanding of nanomaterial interactions with bacterial cell surfaces can facilitate design of antimicrobial and antifouling surfaces and inform assessment of potential consequences of nanomaterial release into the environment. Here, we investigate the interaction of cationic nanoparticles with the main surface components of Gram-positive bacteria: peptidoglycan and teichoic acids. We employed intact cells and isolated cell walls from wild type Bacillus subtilis and two mutant strains differing in wall teichoic acid composition to investigate interaction with gold nanoparticles functionalized with cationic, branched polyethylenimine. We quantified nanoparticle association with intact cells by flow cytometry and determined sites of interaction by solid-state 31P- and 13C-NMR spectroscopy. We find that wall teichoic acid structure and composition were important determinants for the extent of interaction with cationic gold nanoparticles. The nanoparticles interacted more with wall teichoic acids from the wild type and mutant lacking glucose in its wall teichoic acids than those from the mutant having wall teichoic acids lacking alanine and exhibiting more restricted molecular motion. Our experimental evidence supports the interpretation that electrostatic forces contributed to nanoparticle–cell interactions and that the accessibility of negatively charged moieties in teichoic acid chains influences the degree of interaction. The approaches employed in this study can be applied to engineered nanomaterials differing in core composition, shape, or surface functional groups as well as to other types of bacteria to elucidate the influence of nanoparticle and cell surface properties on interactions with Gram-positive bacteria., Cationic gold nanoparticle interaction with strains of Bacillus subtilis is dictated by wall teichoic acid structure and composition.

Chronic wasting disease (CWD) is a fatal prion disease affecting cervids (deer, elk, moose). Current methods to monitor individual disease state include highly invasive antemortem rectal biopsy or postmortem brain biopsy. Efficient, sensitive, and selective antemortem and postmortem testing of populations would increase knowledge of the dynamics of CWD epizootics as well as provide a means to track CWD progression into previously unaffected areas. Here, we analyzed the presence of CWD prions in skin samples from two easily accessed locations (ear and belly) from 30 deceased white-tailed deer (Odocoileus viginianus). The skin samples were enzymatically digested and analyzed by real-time quaking-induced conversion (RT-QuIC). The diagnostic sensitivity of the ear and belly skin samples were both 95%, and the diagnostic specificity of the ear and belly skin were both 100%. Additionally, the location of the skin biopsy on the ear does not affect specificity or sensitivity. These results demonstrate the efficacy of CWD diagnosis with skin biopsies using RT-QuIC. This method could be useful for large scale antemortem population testing.

Nanocellulose has attracted widespread interest for applications in materials science and biomedical engineering due to its natural abundance, desirable physicochemical properties, and high intrinsic mineralizability (i.e., complete biodegradability). A common strategy to increase dispersibility in polymer matrices is to modify the hydroxyl groups on nanocellulose through covalent functionalization, but such modification strategies may affect the desirable biodegradation properties exhibited by pristine nanocellulose. In this study, cellulose nanofibrils (CNFs) functionalized with a range of esters, carboxylic acids, or ethers exhibited decreased rates and extents of mineralization by anaerobic and aerobic microbial communities compared to unmodified CNFs, with etherified CNFs exhibiting the highest level of recalcitrance. The decreased biodegradability of functionalized CNFs depended primarily on the degree of substitution at the surface of the material rather than within the bulk. This dependence on surface chemistry was attributed not only to the large surface area-to-volume ratio of nanocellulose but also to the prerequisite surface interaction by microorganisms necessary to achieve biodegradation. Results from this study highlight the need to quantify the type and coverage of surface substituents in order to anticipate their effects on the environmental persistence of functionalized nanocellulose.

Metal nanoparticles (NPs) functionalized with self-assembled monolayers (SAMs) of long alkanethiol ligands are subject to defects in the SAM structure due to the interplay between alkyl chain packi...

Many pharmaceuticals are present in reclaimed wastewater and effluent-dominated water bodies used to irrigate edible crops. Previous research has shown that plants irrigated with reclaimed wastewater can accumulate pharmaceuticals. However, plant-driven processes that contribute to differences in accumulation among compounds are not well understood. Here, we tested the effects of exposure to mixtures on spinach accumulation and metabolism of four psychoactive pharmaceuticals found in reclaimed wastewater: carbamazepine, fluoxetine, amitriptyline, and lamotrigine. Coexposure of plants to carbamazepine and fluoxetine or amitriptyline decreased accumulation of the toxic carbamazepine metabolite 10,11-epoxycarbamazepine. Furthermore, we tested a simple transpiration-based accumulation model and found that transpiration is a strong predictor for accumulation of the studied compounds. Amitriptyline accumulated to a larger extent than predicted from transpiration alone, and we suggest the possibility that a transporter protein may be involved in its uptake. Our findings highlight the need to consider plant physiology and mixture effects in studying accumulation of polar and ionizable organic contaminants and their metabolites.

Understanding the interactions between surface-functionalized gold nanoparticles (NPs) and lipid bilayers is necessary to guide the design of NPs for biomedical applications. Recent experiments found that cationic NPs adsorb more strongly to phase-separated multicomponent lipid bilayers than single-component liquid-disordered bilayers, suggesting that phase separation affects NP-bilayer interactions. In this work, we use coarse-grained molecular dynamics simulations to investigate the effect of lipid phase behavior on the adsorption of small cationic NPs. We first determined the free energy change for adsorbing a NP to one-phase liquid-disordered and one-phase liquid-ordered bilayers. The simulations indicate that NP adsorption depends on a competition between favorable NP-lipid interactions and the unfavorable curvature deformation of the bilayer, resulting in stronger interactions with the liquid-disordered bilayer due to its lower bending modulus. We then measured the free energy change associated with moving a NP across the surface of a phase-separated bilayer and identified a free energy minimum at the phase boundary. The free energy minimum is attributed to the thickness gradient between the two phases that enables favorable NP-lipid interactions without necessitating large curvature deformations. The simulation results thus indicate that the intrinsic curvature present at phase boundaries drives preferential interactions with surface-adsorbed NPs, providing new insight into the forces that drive NP behavior at multicomponent, phase-separated lipid bilayers.

Environmental routes of transmission contribute to the spread of the prion diseases chronic wasting disease of deer and elk and scrapie of sheep and goats. Prions can persist in soils and other environmental matrices and remain infectious for years. Prions bind avidly to the common soil mineral montmorillonite, and such binding can dramatically increase oral disease transmission. Decontamination of soil in captive facilities and natural habitats requires inactivation agents that are effective when prions are bound to soil microparticles. Here, we investigate the inactivation of free and montmorillonite-bound prions with sodium hydroxide, acidic pH, Environ LpH, and sodium hypochlorite. Immunoblotting and bioassays confirm that sodium hydroxide and sodium hypochlorite are effective for prion deactivation, although montmorillonite appears to reduce the efficacy of hypochlorite. Acidic conditions slightly reduce prion infectivity, and the acidic phenolic disinfectant Environ LpH produces slight reductions in infectivity and immunoreactivity. The extent to which the association with montmorillonite protects prions from chemical inactivation appears influenced by the effect of chemical agents on the clay structure and surface pH. When clay morphology remains relatively unaltered, as when exposed to hypochlorite, montmorillonite-bound prions appear to be protected from inactivation. In contrast, when the clay structure is substantially transformed, as when exposed to high concentrations of sodium hydroxide, the attachment to montmorillonite does not slow degradation. A reduction in surface pH appears to cause slight disruptions in clay structure, which enhances degradation under these conditions. We expect our findings will aid the development of remediation approaches for successful decontamination of prion-contaminated sites.

Supported lipid bilayers (SLBs) have proven to be valuable model systems for studying the interactions of proteins, peptides, and nanoparticles with biological membranes. The physicochemical properties (e.g., topography, coating) of the solid substrate may affect the formation and properties of supported phospholipid bilayers, and thus, subsequent interactions with biomolecules or nanoparticles. Here, we examine the influence of support coating (SiO2vs Si3N4) and topography [sensors with embedded vs protruding gold nanodisks for nanoplasmonic sensing (NPS)] on the formation and subsequent interactions of supported phospholipid bilayers with the model protein cytochrome c and with cationic polymer-wrapped quantum dots using quartz crystal microbalance with dissipation monitoring and NPS techniques. The specific protein and nanoparticle were chosen because they differ in the degree to which they penetrate the bilayer. We find that bilayer formation and subsequent non-penetrative association with cytochrome c were not significantly influenced by substrate composition or topography. In contrast, the interactions of nanoparticles with SLBs depended on the substrate composition. The substrate-dependence of nanoparticle adsorption is attributed to the more negative zeta-potential of the bilayers supported by the silica vs the silicon nitride substrate and to the penetration of the cationic polymer wrapping the nanoparticles into the bilayer. Our results indicate that the degree to which nanoscale analytes interact with SLBs may be influenced by the underlying substrate material.

The composition, orientation, and conformation of proteins in biomolecular coronas acquired by nanoparticles in biological media contribute to how they are identified by a cell. While numerous studies have investigated protein composition in biomolecular coronas, relatively little detail is known about how the nanoparticle surface influences the orientation and conformation of the proteins associated with them. We previously showed that the peripheral membrane protein cytochrome

Electrochemical formation of high-energy species such as hydroxyl radicals in aqueous media is inefficient because oxidation of H2O to form O2 is a more thermodynamically favorable reaction. Boron-doped diamond (BDD) is widely used as an electrode material for generating •OH radicals because it has a very large kinetic overpotential for O2 production, thus increasing electrochemical efficiency for •OH production. Yet, the underlying mechanisms of O2 and •OH production at diamond electrodes are not well understood. We demonstrate that boron-doped diamond surfaces functionalized with hydrophobic, polyfluorinated molecular ligands (PF-BDD) have significantly higher electrochemical efficiency for •OH production compared with hydrogen-terminated (H-BDD), oxidized (O-BDD), or poly(ethylene ether)-functionalized (E-BDD) boron-doped diamond samples. Our measurements show that •OH production is nearly independent of surface functionalization and pH (pH = 7.4 vs 9.2), indicating that •OH is produced by oxidation of H2O in an outer-sphere electron-transfer process. In contrast, the total electrochemical current, which primarily produces O2, differs strongly between samples with different surface functionalizations, indicating an inner-sphere electron-transfer process. X-ray photoelectron spectroscopy measurements show that although both H-BDD and PF-BDD electrodes are oxidized over time, PF-BDD showed longer stability (≈24 h of use) than H-BDD. This work demonstrates that increasing surface hydrophobicity using perfluorinated ligands selectively inhibits inner-sphere oxidation to O2 and therefore provides a pathway to increased efficiency for formation of •OH via an outer-sphere process. The use of hydrophobic electrodes may be a general approach to increasing selectivity toward outer-sphere electron-transfer processes in aqueous media.

Summary Although mixing nanoparticles with certain biological molecules can result in coronas that afford some control over how engineered nanomaterials interact with living systems, corona formation mechanisms remain enigmatic. Here, we report results from experiments and computer simulations that provide concrete lines of evidence for spontaneous lipid corona formation without active mixing upon attachment to stationary and suspended lipid bilayer membranes. Experiments show that polycation-wrapped particles disrupt the tails of zwitterionic lipids, increase bilayer fluidity, and leave the membrane with reduced ζ potentials. Computer simulations suggest that the contact ion pairing between the lipid head groups and the polycations' ammonium groups leads to the formation of stable, albeit fragmented, lipid bilayer coronas. The mechanistic insight regarding lipid corona formation can be used to improve control over nano-bio interactions and to help understand why some nanomaterial-ligand combinations are detrimental to organisms but others are not.

Perfluoroalkyl substances (PFAS) are ubiquitous and persistent environmental contaminants, yet knowledge of their biological effects and mechanisms of action is limited. The highest aqueous PFAS concentrations are found in areas where bacteria are relied upon for functions such as nutrient cycling and contaminant degradation, including fire-training areas, wastewater treatment plants, and landfill leachates. This research sought to elucidate one of the mechanisms of action of PFAS by studying their uptake by bacteria and partitioning into model phospholipid bilayer membranes. PFAS partitioned into bacteria as well as model membranes (phospholipid liposomes and bilayers). The extent of incorporation into model membranes and bacteria was positively correlated to the number of fluorinated carbons. Furthermore, incorporation was greater for perfluorinated sulfonates than for perfluorinated carboxylates. Changes in zeta potential were observed in liposomes but not bacteria, consistent with PFAS being incorporated into the phospholipid bilayer membrane. Complementary to these results, PFAS were also found to alter the gel-to-fluid phase transition temperature of phospholipid bilayers, demonstrating that PFAS affected lateral phospholipid interactions. This investigation compliments other studies showing that sulfonated PFAS and PFAS with more than seven fluorinated carbons have a higher potential to accumulate within biota than carboxylated and shorter-chain PFAS.

Molecular understanding of the impact of nanomaterials on cell membranes is critical for the prediction of effects that span environmental exposures to nanoenabled therapies. Experimental and computational studies employing phospholipid bilayers as model systems for membranes have yielded important insights but lack the biomolecular complexity of actual membranes. Here, we increase model membrane complexity by incorporating the peripheral membrane protein cytochrome c and studying the interactions of the resulting membrane systems with two types of anionic nanoparticles. Experimental and computational studies reveal that the extent of cytochrome c binding to supported lipid bilayers depends on anionic phospholipid number density and headgroup chemistry. Gold nanoparticles functionalized with short, anionic ligands or wrapped with an anionic polymer do not interact with silica-supported bilayers composed solely of phospholipids. Strikingly, when cytochrome c was bound to these bilayers, nanoparticles functionalized with short anionic ligands attached to model biomembranes in amounts proportional to the number of bound cytochrome c molecules. In contrast, anionic polymer-wrapped gold nanoparticles appeared to remove cytochrome c from supported lipid bilayers in a manner inversely proportional to the strength of cytochrome c binding to the bilayer; this reflects the removal of a weakly bound pool of cytochrome c, as suggested by molecular dynamics simulations. These results highlight the importance of the surface chemistry of both the nanoparticle and the membrane in predicting nano-bio interactions.

Bacterial uptake of charged organic pollutants such as the widely used herbicide glyphosate is typically attributed to active transporters, whereas passive membrane permeation as an uptake pathway is usually neglected. For 1-palmitoyl-2-oleoyl-snglycero-3-phosphocholine (POPC) liposomes, the pH-dependent apparent membrane permeation coefficients (P-app) of glyphosate, determined by nuclear magnetic resonance (NMR) spectroscopy, varied from P-app (pH 7.0) = 3.7 (+/- 0.3) x 10(-7) m.s(-1) to P-app (pH 4.1) = 4.2 (+/- 0.1) x 10(-6) m.s(-1). The magnitude of this surprisingly rapid membrane permeation depended on glyphosate speciation and was, at circumneutral pH, in the range of polar, noncharged molecules. These findings point to passive membrane permeation as a potential uptake pathway during glyphosate biodegradation. To test this hypothesis, a Gram-negative glyphosate degrader, Ochrobactrum sp. FrEM, was isolated from glyphosate-treated soil and glyphosate permeation rates inferred from the liposome model system were compared to bacterial degradation rates. Estimated maximum permeation rates were, indeed, 2 orders of magnitude higher than degradation rates of glyphosate. In addition, biodegradation of millimolar glyphosate concentrations gave rise to pronounced carbon isotope fractionation with an apparent kinetic isotope effect, AKIE(carbon), of 1.014 +/- 0.003. This value lies in the range typical of non-masked enzymatic isotope fractionation demonstrating that glyphosate biodegradation was not subject to mass transfer limitations and glyphosate exchange across the cell membrane was rapid relative to enzymatic turnover.

Many ionizable organic contaminants (IOCs) are present in treated wastewater used to irrigate edible crops and accumulate in plants under field conditions. Phytoavailability of IOCs with pKa values between 4 and 9 may be affected by the pH of the rhizosphere (the water and soil within 2–3 mm of the root surface). Plants can alter rhizosphere pH by 2–3 units in either direction in response to nutrient availability. The effects of plant modulation of rhizosphere pH on IOC accumulation have not been previously reported. Here we provide direct evidence that plant-driven changes in rhizosphere pH impact accumulation of an IOC in plant leaves. Using a modified hydroponic system, we found that rhizosphere pH was higher by 1.5–2.4 units when plants received only nitrate rather than a combination of nitrate and ammonium. Plant-driven changes to rhizosphere pH altered accumulation of lamotrigine (pKa = 5.7) but not carbamazepine, a non-ionizable contaminant. Lamotrigine accumulation in leaves correlated strongly wi...

Charge densities of cationic polymers adsorbed to lipid bilayers are estimated from second harmonic generation (SHG) spectroscopy and quartz crystal microbalance with dissipation monitoring (QCM-D) measurements. The systems surveyed included poly(vinylamine hydrochloride) (PVAm), poly(diallyldimethylammonium chloride) (PDADMAC), poly-l-lysine (PLL), and poly-l-arginine (PLR), as well as polyalcohol controls. Upon accounting for the number of positive charges associated with each polyelectrolyte, the binding constants and apparent free energies of adsorption as estimated from SHG data are comparable despite differences in molecular masses and molecular structure, with ΔGads values of -61 ± 2, -58 ± 2, -57 ± 1, -52 ± 2, -52 ± 1 kJ mol-1 for PDADMAC400, PDADMAC100, PVAm, PLL, and PLR, respectively. Moreover, we find charge densities for polymer adlayers of approximately 0.3 C m-2 for poly(diallyldimethylammonium chloride) while those of poly(vinylamine) hydrochloride, poly-l-lysine, and poly-l-arginine are approximately 0.2 C m-2. Time-dependent studies indicate that polycation adsorption to supported lipid bilayers is only partially reversible for most of the polymers explored. Poly(diallyldimethylammonium chloride) does not demonstrate reversible binding even over long timescales (>8 hours).

Interactions of functionalized nanomaterials with biological membranes are expected to be governed by not only nanoparticle physiochemical properties but also coatings or "coronas" of biomacromolecules acquired after immersion in biological fluids. Here we prepared a library of 4-5 nm gold nanoparticles (AuNPs) coated with either ω-functionalized thiols or polyelectrolyte wrappings to examine the influence of surface functional groups on the assemblage of proteins complexing the nanoparticles and its subsequent impact on attachment to model biological membranes. We find that the initial nanoparticle surface coating has a cascading effect on interactions with model cell membranes by determining the assemblage of complexing proteins, which in turn influences subsequent interaction with model biological membranes. Each type of functionalized AuNP investigated formed complexes with a unique ensemble of serum proteins that depended on the initial surface coating of the nanoparticles. Formation of protein-nanoparticle complexes altered the electrokinetic, hydrodynamic, and plasmonic properties of the AuNPs. Complexation of the nanoparticles with proteins reduced the attachment of cationic AuNPs and promoted attachment of anionic AuNPs to supported lipid bilayers; this trend is observed with both lipid bilayers comprising 100% zwitterionic phospholipids and those incorporating anionic phosphatidylinositol. Complexation with serum proteins led to attachment of otherwise noninteracting oligo(ethylene glycol)-functionalized AuNPs to bilayers containing phosphatidylinositol. These results demonstrate the importance of considering both facets of the nano-bio interface: functional groups displayed on the nanoparticle surface and proteins complexing the nanoparticles influence interaction with biological membranes as does the molecular makeup of the membranes themselves.

Mechanistic insight into how polycations disrupt and cross cell membranes is needed for understanding and controlling polycation-membrane interactions, yet such information is surprisingly difficult to obtain at the molecular level. We use second harmonic and vibrational sum frequency generation spectroscopies along with quartz crystal microbalance with dissipation monitoring and computer simulations to quantify the interaction of poly(allylamine) hydrochloride (PAH) and its monomeric precursor allylamine hydrochloride (AH) with lipid bilayers. We find PAH adsorption to be reversible and nondisruptive to the bilayer under the conditions of our experiments. With an observed free adsorption energy of -52.7 ± 0.6 kJ/mol, PAH adsorption was found to be surprisingly less favorable relative to AH (-14.6 ± 0.4 kJ/mol) when considering a simple additive model. By experimentally quantifying the number of adsorbates and the average amount of charge carried by each adsorbate, we find that the PAH is associated with only 70% of the positive charges it could hold while the AH remains mostly charged while attached to the membrane. Simulations indicate that PAH pulls in condensed counterions from solution to avoid charge-repulsion along its backbone and with other PAH molecules to attach to, and completely cover, the bilayer surface. In addition, computations indicate that the amine groups shift their pK

The surface charge of nanomaterials determines their stability in solution and interaction with other molecules and surfaces, yet experimental determination of surface charge of complex nanomaterials is not straightforward. We propose a hybrid approach that iteratively integrates explicit solvent molecular dynamics simulations and a multiconformer continuum electrostatic model (MCCE) to efficiently sample the configurational and titration spaces of surface ligands of nanomaterials. Test calculations of model systems indicate that the iterative approach converges rapidly even for systems that contain hundreds of titratable sites, making the approach complementary to more elaborate methods such as explicit solvent-based constant-pH molecular dynamics. The hybrid method is applied to analyze the pKa distribution of alkylamines attached to a carbon-based nanoparticle as a function of ligand density, nanoparticle surface curvature, and ligand heterogeneity. The results indicate that functionalization strategie...

A variety of peptidic and proteinaceous contaminants (e.g., proteins, toxins, pathogens) present in the environment may pose risk to human health and wildlife. Peroxymonosulfate is a strong oxidant (EH0 = 1.82 V for HSO5-, the predominant species at environmental pH values) that may hold promise for the deactivation of proteinaceous contaminants. Relatively little quantitative information exists on the rates of peroxymonosulfate reactions with free amino acids. Here, we studied the oxidation of 19 of the 20 standard proteinogenic amino acids (all except cysteine) by peroxymonosulfate without explicit activation. Reaction half-lives at pH 7 ranged from milliseconds to hours. Amino acids possessing sulfur-containing, heteroaromatic, or substituted aromatic side chains were the most susceptible to oxidation by peroxymonosulfate, with rates of transformation decreasing in the order methionine > tryptophan > tyrosine > histidine. The rate of tryptophan oxidation did not decrease in the presence of an aquatic natural organic matter. Singlet oxygen resulting from peroxymonosulfate self-decomposition, while detected by electron paramagnetic resonance spectroscopy, was unlikely to be the principal reactive species. Our results demonstrate that peroxymonosulfate is capable of oxidizing 19 amino acids without explicit activation and that solvent-exposed methionine and tryptophan residues are likely initial targets of oxidation in peptides and proteins.

Membrane-bound proteins can play a role in the binding of anionic gold nanoparticles (AuNPs) to model bilayers; however, the mechanism for this binding remains unresolved. In this work, we determine the relative orientation of the peripheral membrane protein cytochrome c in binding to a mercaptopropionic acid-functionalized AuNP (MPA-AuNP). As this is nonrigid binding, traditional methods involving crystallographic or rigid molecular docking techniques are ineffective at resolving the question. Instead, we have implemented a computational assay technique using a cross-correlation of a small ensemble of 200 ns long molecular dynamics trajectories to identify a preferred nonrigid binding orientation or pose of cytochrome c on MPA-AuNPs. We have also employed a mass spectrometry-based footprinting method that enables the characterization of the stable protein corona that forms at long time-scales in solution but remains in a dynamic state. Through the combination of these computational and experimental primary results, we have established a consensus result establishing the identity of the exposed regions of cytochrome c in proximity to MPA-AuNPs and its complementary pose(s) with amino-acid specificity. Moreover, the tandem use of the two methods can be applied broadly to determine the accessibility of membrane-binding sites for peripheral membrane proteins upon adsorption to AuNPs or to determine the exposed amino-acid residues of the hard corona that drive the acquisition of dynamic soft coronas. We anticipate that the combined use of simulation and experimental methods to characterize biomolecule-nanoparticle interactions, as demonstrated here, will become increasingly necessary as the complexity of such target systems grows.

International audience; The chemical composition and properties of environmental media determine nanomaterial (NM) transport, fate, biouptake, and organism response. To compare and interpret experimental data, it is essential that sufficient context be provided for describing the physical and chemical characteristics of the setting in which a nanomaterial may be present. While the nanomaterial environmental, health and safety (NanoEHS) field has begun harmonization to allow data comparison and re-use (e.g. using standardized materials, defining a minimum set of required material characterizations), there is limited guidance for standardizing test media. Since most of the NM properties driving environmental behaviour and toxicity are medium-dependent, harmonization of media is critical. A workshop in March 2016 at Duke University identified five categories of test media: aquatic testing media, soil and sediment testing media, biological testing media, engineered systems testing media and product matrix testing media. For each category of test media, a minimum set of medium characteristics to report in all NM tests is recommended. Definitions and detail level of the recommendations for specific standardized media vary across these media categories. This reflects the variation in the maturity of their use as a test medium and associated measurement techniques, variation in utility and relevance of standardizing medium properties, ability to simplify standardizing reporting requirements, and in the availability of established standard reference media. Adoption of these media harmonization recommendations will facilitate the generation of integrated comparable datasets on NM fate and effects. This will in turn allow testing of the predictive utility of functional assay measurements on NMs in relevant media, support investigation of first principles approaches to understand behavioral mechanisms, and support categorization strategies to guide research, commercial development, and policy.

Prions, the etiological agents in transmissible spongiform encephalopathies, exhibit remarkable resistance to most methods of inactivation that are effective against conventional pathogens. Prions are composed of pathogenic conformers of the prion protein (PrPTSE). Some prion diseases are transmitted, in part, through environmental routes. The recalcitrance of prions to inactivation may lead to a persistent reservoir of infectivity that contributes to the environmental maintenance of epizootics. At present, few methods exist to remediate prion-contaminated lands. Here we examined the ability of peroxymonosulfate to degrade PrPTSE as an initial step toward developing an in situ chemical oxidation process to inactivate prions. We find that peroxymonosulfate rapidly degrades PrPTSE from two species. Transition metal-catalyzed decomposition of peroxymonosulfate to produce sulfate radicals appears to enhance degradation. We further demonstrate that exposure to peroxymonosulfate significantly reduced PrPC-to-PrPTSE converting ability as measured by protein misfolding cyclic amplification, used as a proxy for infectivity. Liquid chromatography-tandem mass spectrometry revealed that exposure to peroxymonosulfate results in oxidative modifications to methionine and tryptophan residues. This study indicates that peroxymonosulfate may hold promise for in situ remediation of prion-contaminated surfaces.

Second harmonic generation (SHG) is useful for studying the properties of interfaces, including the surfaces of nanoparticles and the interaction of nanoparticles with biologically relevant surfaces. Gold nanoparticles at the biological membrane represent a particularly interesting system to be probed by SHG spectroscopy given the rich electronic structure of gold nanoparticles and the charged nature of the nano-bio interface. Here we describe the interplay between the resonant and nonresonant components of the second harmonic response as 4 and 14 nm spherical gold nanoparticles (AuNPs) wrapped in the cationic polyelectrolyte poly(allylamine hydrochloride) (PAH) adsorb to negatively charged supported lipid bilayers. In contrast to the SHG response of 4 nm PAH-AuNPs, that we have shown previously to be dominated by resonance enhancement, the SHG response from the adsorption of the 14 nm PAH-AuNPs, with similar hydrodynamic diameters, to a 9:1 DOPC:DOTAP bilayer is dominated by the nonresonant, interfacial,...

Crops irrigated with reclaimed wastewater or grown in biosolids-amended soils may take up pharmaceuticals and personal care product ingredients (PPCPs) through their roots. The uptake pathways followed by PPCPs and the propensity for these compounds to bioaccumulate in food crops are still not well understood. In this critical review, we discuss processes expected to influence root uptake of PPCPs, evaluate current literature on uptake of PPCPs, assess models for predicting plant uptake of these compounds, and provide recommendations for future research, highlighting processes warranting study that hold promise for improving mechanistic understanding of plant uptake of PPCPs. We find that many processes that are expected to influence PPCP uptake and accumulation have received little study, particularly rhizosphere interactions, in planta transformations, and physicochemical properties beyond lipophilicity (as measured by Kow). Data gaps and discrepancies in methodology and reporting have so far hindered development of models that accurately predict plant uptake of PPCPs. Topics warranting investigation in future research include the influence of rhizosphere processes on uptake, determining mechanisms of uptake and accumulation, in planta transformations, the effects of PPCPs on plants, and the development of predictive models.

Antimicrobial silver nanoparticles used in consumer products may be released during fabrication, during product use, or after disposal and may reach terrestrial and aquatic ecosystems, prompting concern about their potential to adversely impact the environment (Benn and Westerhoff, Environ. Sci. Technol., 2008, 42, 4133, DOI: 10.1021/es7032718). Although the toxicity of pristine silver nanoparticles is well studied and understood, silver nanoparticles can undergo transformation during release and in engineered and natural environments. The speciation of silver after release must therefore be explored to deepen understanding of the potential impact of these nanoparticles on the environment. Herein, we highlight three articles which use highly sensitive analytical techniques to define, and in some cases map, silver speciation in situ after exposure to organisms of varying size and complexity. First, we highlight research by Leonardo et al. which explores the transformations of silver acted upon by a microalgae species that is a candidate for heavy metal remediation in water. Next, we highlight research by Stegemeier et al. quantifying and mapping the speciation of silver in alfalfa after exposure to several silver sources, including two silver-based nanoparticles. Finally, we discuss work by Wang et al. on silver speciation in human monocyte cells as observed by synchrotron radiation techniques which leads to mechanistic insights on cytotoxicity.

For nanoparticles that have been released into the environment, the cell membrane represents an initial site of interaction with eukaryotic cells. The encounter of nanoparticles with cellular membranes may alter membrane structure and function, lead to uptake into cells, or elicit adverse biological responses. Supported lipid bilayers have proven to be valuable ex vivo models for biological membranes, allowing investigation of their mechanisms of interaction with nanoparticles with a degree of control impossible in living cells. To date, the majority of research on nanoparticle interaction with supported lipid bilayers has employed membranes composed of single or binary mixtures of phospholipids. Cellular membranes contain a wide variety of lipids and exhibit lateral organization. Ordered membrane domains enriched in specific membrane components, also referred to as lipid rafts, have not been explored with respect to their interaction with nanoparticles. Here we develop model membranes containing segregated domains differing in fluidity that are amenable to investigation by a variety of surface-sensitive analytical techniques and demonstrate that these domains influence the extent of nanoparticle attachment to model membranes. We determined conditions that allow reliable formation of bilayers containing liquid-ordered domains enriched in sphingomyelin and cholesterol and confirmed their morphology by structured illumination and atomic force microscopies. We demonstrate that the presence of liquid-ordered domains increases attachment of cationic gold nanoparticles to model membranes relative to those lacking such domains under near physiological ionic strength conditions (0.1 M NaCl) at pH 7.4. We anticipate that these results will serve as the foundation for and motivate further study of nanoparticle interaction with phase-segregated domains.

The cytoplasmic membrane represents an essential barrier between the cytoplasm and the environment external to cells. Interaction with nanomaterials can alter the integrity of the cytoplasmic membrane through the formation of holes and membrane thinning, which can ultimately lead to adverse biological impacts. Here we use supported lipid bilayers as experimental models for the cytoplasmic membrane to investigate the impact of quantum dots functionalized with the cationic polymer poly(diallyldimethylammonium chloride) (PDDA) on membrane structure. Using a quartz crystal microbalance with dissipation monitoring we show that the positively charged quantum dots attach to and induce structural rearrangement to zwitterionic bilayers in solely the liquid-disordered phase and in those containing phase-segregated liquid-ordered domains. Real-time atomic force microscopy imaging revealed that PDDA-coated quantum dots and, to a lesser extent, PDDA itself induced the disappearance of liquid-ordered domains. We hypothesize this effect is due to an increase in energy per unit area caused by collisions between PDDA-coated quantum dots at the membrane surface. This increase in free energy per area exceeds the approximate free-energy change associated with membrane mixing between the liquid-ordered and liquid-disordered phases and results in the destabilization of membrane domains.

Quantifying the number of charges on peptides bound to interfaces requires reliable estimates of (i) surface coverage and (ii) surface charge, both of which are notoriously difficult parameters to obtain, especially at solid/water interfaces. Here, we report the thermodynamics and electrostatics governing the interactions of l-lysine and l-arginine octamers (Lys8 and Arg8) with supported lipid bilayers prepared., Quantifying the number of charges on peptides bound to interfaces requires reliable estimates of (i) surface coverage and (ii) surface charge, both of which are notoriously difficult parameters to obtain, especially at solid/water interfaces. Here, we report the thermodynamics and electrostatics governing the interactions of l-lysine and l-arginine octamers (Lys8 and Arg8) with supported lipid bilayers prepared from a 9 : 1 mixture of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (sodium salt) (DMPG) from second harmonic generation (SHG) spectroscopy, quartz crystal microbalance with dissipation monitoring (QCM-D) and nanoplasmonic sensing (NPS) mass measurements, and atomistic simulations. The combined SHG/QCM-D/NPS approach provides interfacial charge density estimates from mean field theory for the attached peptides that are smaller by a factor of approximately two (0.12 ± 0.03 C m–2 for Lys8 and 0.10 ± 0.02 C m–2 for Arg8) relative to poly-l-lysine and poly-l-arginine. These results, along with atomistic simulations, indicate that the surface charge density of the supported lipid bilayer is neutralized by the attached cationic peptides. Moreover, the number of charges associated with each attached peptide is commensurate with those found in solution; that is, Lys8 and Arg8 are fully ionized when attached to the bilayer. Computer simulations indicate Lys8 is more likely than Arg8 to “stand-up” on the surface, interacting with lipid headgroups through one or two sidechains while Arg8 is more likely to assume a “buried” conformation, interacting with the bilayer through up to six sidechains. Analysis of electrostatic potential and charge distribution from atomistic simulations suggests that the Gouy–Chapman model, which is widely used for mapping surface potential to surface charge, is semi-quantitatively valid; despite considerable orientational preference of interfacial water, the apparent dielectric constant for the interfacial solvent is about 30, due to the thermal fluctuation of the lipid–water interface.