Search

Corrosion and release of nickel ions from biomedical alloys are well documented, but little is still known about the effects of released nickel ions on cellular function with recurrent inflammatory challenges. Evidence suggests Ni(II) ions amplify LPS-induced secretion of several pro-inflammatory cytokines from monocytes. Exacerbating the inflammatory response, hyperglycemic conditions also affect monocytic function. This study investigated how Ni(II) and hyperglycemic conditions, both singly and in combination, alter monocyte proliferation, mitochondrial activity, inflammatory responses, and differentiation. Results showed that Ni(II) did not affect proliferation, but decreased mitochondrial activity in monocytic-cells and macrophages under normal conditions. However, hyperglycemic conditions negated the toxicity seen with Ni(II) exposure. Cytokine secretion in response to LPS was variable, with little effect on IL6 secretion, but significantly increased secretion of IL1β at intermediate Ni(II) concentrations. Hyperglycemic conditions did not alter these results significantly. Finally, exposure to eluants from nickel-based commercial alloys caused enhanced IL1β secretion from PMA-treated cells. These data suggest that corrosion products from nickel-containing dental alloys increased Ni(II)-induced changes in cytokine secretion by monocytes and macrophages. By better defining the effects of Ni(II) at these lower, biomedically relevant concentrations, we improve understanding of the biomedical alloy risk in the context of dental inflammation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A:2433-2439, 2018.

The calcium ion [Ca(II)] release from monosodium titanates (MST) complexed to calcium ions [Ca(II)], referred to as MST-Ca(II), was examined under varying incubation times, pH conditions, and ion equilibrium disruptions.Sample supernatants were analyzed for Ca(II) using the QuantiChrom Calcium Assay Kit.No Ca(II) was detected in native MST (control) supernatants but was detected in MST-Ca(II) supernatants. At pH 7, Ca(II) release increased from 0 to 2.5 mg/dL over 3 days (P0.05 compared to MST control), remaining constant over the completed incubation times. At pH 5, 15 mg/dL of Ca(II) was immediately released with no further release. When the pH was modulated pH 4 to pH 9, Ca(II) concentration dropped from 25 mg/dL to ~0 mg/dL. Finally, when equilibrium was disrupted by partial replacement of the supernatant with sterile water, Ca(II) release was ongoing, reaching a cumulative total of 20 mg/dL over 35 days.The current results suggest that particulate MST-Ca(II) complexes exhibit sustained release of calcium, and that release might be customized by conditions of pH and ionic strength. Thus, these complexes appear promising for biological applications where calcium-mediated mineralization or re-mineralization are desired.

The University of Washington School of Dentistry may be the first dental school in the nation to apply lean process management principles as a primary tool to re-engineer its operations and curriculum to produce the dentist of the future. The efficiencies realized through re-engineering will better enable the school to remain competitive and viable as a national leader of dental education. Several task forces conducted rigorous value stream analyses in a highly collaborative environment led by the dean of the school. The four areas undergoing evaluation and re-engineering were organizational infrastructure, organizational processes, curriculum, and clinic operations. The new educational model was derived by thoroughly analyzing the current state of dental education in order to design and achieve the closest possible ideal state. As well, the school's goal was to create a lean, sustainable operational model. This model aims to ensure continued excellence in restorative dental instruction and to serve as a blueprint for other public dental schools seeking financial stability in this era of shrinking state support and rising costs.

Corrosion and release of nickel ions from biomedical alloys are well documented, but little is still known about the effects of released nickel ions on cellular function with recurrent inflammatory challenges. Evidence suggests Ni(II) ions amplify LPS-induced secretion of several pro-inflammatory cytokines from monocytes. Exacerbating the inflammatory response, hyperglycemic conditions also affect monocytic function. This study investigated how Ni(II) and hyperglycemic conditions, both singly and in combination, alter monocyte proliferation, mitochondrial activity, inflammatory responses, and differentiation. Results showed that Ni(II) did not affect proliferation, but decreased mitochondrial activity in monocytic-cells and macrophages under normal conditions. However, hyperglycemic conditions negated the toxicity seen with Ni(II) exposure. Cytokine secretion in response to LPS was variable, with little effect on IL6 secretion, but significantly increased secretion of IL1β at intermediate Ni(II) concentrations. Hyperglycemic conditions did not alter these results significantly. Finally, exposure to eluants from nickel-based commercial alloys caused enhanced IL1β secretion from PMA-treated cells. These data suggest that corrosion products from nickel-containing dental alloys increased Ni(II)-induced changes in cytokine secretion by monocytes and macrophages. By better defining the effects of Ni(II) at these lower, biomedically relevant concentrations, we improve understanding of the biomedical alloy risk in the context of dental inflammation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A:2433-2439, 2018.

Several studies suggest that light in the UVA range (320–400 nm) activates signaling pathways that are anti-inflammatory and antioxidative. These effects have been attributed to Nrf2-mediated upregulation of “phase 2” genes such as heme oxygenase-1 (HO-1) that neutralize oxidative stress and metabolize electrophiles. Proteomics analysis previously had shown that small doses of blue light (400–500 nm) increased levels of peroxiredoxin phase 2 proteins in THP-1 monocytes, which led to our hypothesis that blue light activates Nrf2 signaling and thus may serve as an anti-inflammatory agent. THP-1 monocytes were treated with doses of blue light with and without lipopolysaccharide (LPS) inflammatory challenge. Cell lysates were tested for Nrf2 activation and HO-1 production. Treated cells were assessed for viability/mitochondrial activity via trypan blue exclusion and MTT assay, and secretion of two major pro-inflammatory cytokines, interleukin 8 (IL8) and tumor necrosis factor alpha (TNFα) was measured using ELISA. Blue light activated the phase 2 response in cultured THP-1 cells and was protective against LPS-induced cytotoxicity. Light pre-treatment also significantly reduced cytokine secretion in response to 0.1 μg ml−1 LPS, but had no anti-inflammatory effect at high LPS levels. This study is the first to report these effects using a light source that is approved for routine use on dental patients. Cellular responses to these light energies are worth further study and may provide therapeutic interventions for inflammation.

Previous studies report that microsized monosodium titanates (MSTs) deliver metal ions and species to mammalian cells and bacteria with cell-specific and metal-specific effects. In this study, we explored the use of MST and a new synthesized nanosized monosodium titanate (nMST) to deliver gold(III), cisplatin, or platinum(IV) to two human cell lines with different population doubling times, in vitro. The effect was measured using a fluorescent mitochondrial activity assay (CellTiter-Blue® Assay). This fluorescence assay was implemented to mitigate optical density measurement errors owing to particulate titanate interference and allowed for the studies to be extended to higher titanate concentrations than previously possible. Overall, native MST significantly (p 50 mg/L. Native nMST significantly suppressed the rapidly dividing cell line (by 50%) over untreated cultures, but had no effect on the more slowly dividing cells. For both cell types, increased titanate concentrations resulted in increased effects from delivered metals. However, there was no difference in the effect of metal delivered from micro- versus nano-sized MST. © 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 103B: 254–260, 2015.

Background Titanates are inorganic, amorphous, aqueously insoluble, particulate compounds of titanium, oxygen, hydrogen, and sodium. Two types of titanates, monosodium titanate (MST) and amorphous peroxotitanate (APT), have recently been proposed for use in biological applications where it would be advantageous to locally sequester and deliver metals to alter cellular functions. Purpose In the current study, the ability of MST and APT to suppress the mitochondrial function of a rapidly dividing cell line, OSC2 (oral squamous cell carcinoma) with and without loaded metals [Au(III), Hg(II), Pd(II), Pt(II), Pt(IV), and cis Pt] was determined. Methods Cellular mitochondrial activity of OSC2 cells after 72 hours exposure to titanates or titanate-metal compounds was estimated by measuring succinate dehydrogenase (SDH) activity via the 3-(4,5-dimethythiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) method. Results The results of this study showed that neither native APT nor native MST was biologically neutral to oral squamous cell carcinoma (OSC2). Increasing the concentration of either MST or APT resulted in a statistically significant decrease in SDH activity of OSC2 cells versus untreated cells (40% for APT and 30% for MST). The addition of titanate-metal compounds augmented the effects of APT and MST on OSC2 metabolism, decreasing overall mitochondrial activity compared to controls by 50–70%. However, both titanate types and metal ion species determined the degree to which the SDH activity was suppressed. Conclusion The findings of the current study demonstrate that APT and MST alone significantly suppress the metabolism of a rapidly dividing cell line, an effect that is augmented by specific titanate-metal combinations. These compounds may have potential as unique therapeutic agents.

Introduction Pulp repair is less likely to occur when dentin or pulpal tissue remains infected after caries excavation. Yet there are currently few options to kill residual bacteria without damaging resident cells. The current study has evaluated the effect of 3 blue light–activated chemicals on the viability of lactobacilli, odontoblast-like cells (MDPC-23), undifferentiated pulp cells (OD21), and human embryonic stem cells (hESC H1). Methods Bacteria were incubated for 15 minutes with curcumin, eosin Y, or rose bengal and then irradiated with blue light (240 seconds). Bacteria were labeled with LIVE/DEAD BacLight Bacterial Viability kit, and viability was assessed by fluorescence-activated cell sorting. Cytotoxicity assays were performed on MDPC-23 cells, OD21, and hESC H1 cells grown in 24-well plates and exposed to the same photosensitizer-light combination. After 24 hours, cellular response was measured by using the methyl-thiazol-diphenyl-tetrazolium assay. Results were statistically analyzed by using one-way analysis of variance and Tukey multiple comparison intervals (α = 0.05). Results Bacterial viability was significantly reduced after exposure to different combinations of light and photosensitizers; mitochondrial activity of cultured cells remained unaffected when exposed to the same conditions, suggesting a good therapeutic index in vitro. Conclusions Blue light–mediated disinfection is promising for the development of new treatment strategies designed to promote pulp repair after carious exposure.

Background The prevalence of dentin hypersensitivity is uncertain, yet appropriate diagnosis and treatment of dentin hypersensitivity require accurate knowledge regarding its prevalence. The authors conducted a study to estimate the prevalence of dentin hypersensitivity in general dental practices and to investigate associated risk factors. Methods The authors conducted a cross-sectional survey of 787 adult patients from 37 general dental practices within Northwest Practice-based Research Collaborative in Evidence-based DENTistry (PRECEDENT). Dentin hypersensitivity was diagnosed by means of participants' responses to a question regarding pain in their teeth and gingivae, and practitioner-investigators conducted a clinical examination to rule out alternative causes of pain. Participants recorded their pain level on a visual analog scale and the Seattle Scales in response to a one-second air blast. The authors used generalized estimating equation log-linear models to estimate the prevalence and the prevalence ratios. Results The prevalence of dentin hypersensitivity was 12.3 percent; patients with hypersensitivity had, on average, 3.5 hypersensitive teeth. The prevalence of dentin hypersensitivity was higher among 18- to 44-year olds than among participants 65 years or older; it also was higher in women than in men, in participants with gingival recession than in those without gingival recession and in participants who underwent at-home tooth whitening than in those who did not. Hypersensitivity was not associated with obvious occlusal trauma, noncarious cervical lesions or aggressive toothbrushing habits. Conclusions One in eight participants from general practices had dentin hypersensitivity, which was a chronic condition causing intermittent, low-level pain. Patients with hypersensitivity were more likely to be younger, to be female and to have a high prevalence of gingival recession and at-home tooth whitening. Practical Implications Given dentin hypersensitivity's prevalence, clinicians should diagnose it only after investigating all other possible sources of pain.

Monosodium titanates (MST) are a relatively novel form of particulate titanium dioxide that have been proposed for biological use as metal sorbents or delivery agents, most recently calcium (II). In these roles, the toxicity of the titanate or its metal complex is crucial to its biological utility. The aim of this study was to determine the cytotoxicity of MST and MST-calcium complexes with MC3T3 osteoblast-like cells; MST-Ca(II) complexes could be useful to promote bone formation in various hard tissue applications. MC3T3 cells were exposed to native MST or MST-Ca(II) complexes for 24–72 h. A CellTiter-Blue® assay was employed to assess the metabolic activity of the cells. The results showed that MST and MST-Ca(II) suppressed MC3T3 metabolic activity significantly in a dose-, time-, and cell-density-dependent fashion. MST-Ca(II) suppressed MC3T3 metabolism in a statistically identical manner as native MST at all concentrations. We concluded that MST and MST-Ca(II) are significantly cytotoxic to MC3T3 cells through a mechanism yet unknown; this is a potential problem to the biological utility of these complexes.

The use of zirconia in medicine and dentistry has rapidly expanded over the past decade, driven by its advantageous physical, biological, esthetic, and corrosion properties. Zirconia orthopedic hip replacements have shown superior wear-resistance over other systems; however, risk of catastrophic fracture remains a concern. In dentistry, zirconia has been widely adopted for endosseous implants, implant abutments, and all-ceramic crowns. Because of an increasing demand for esthetically pleasing dental restorations, zirconia-based ceramic restorations have become one of the dominant restorative choices. Areas covered: This review provides an updated overview of the applications of zirconia in medicine and dentistry with a focus on dental applications. The MEDLINE electronic database (via PubMed) was searched, and relevant original and review articles from 2010 to 2016 were included. Expert commentary: Recent data suggest that zirconia performs favorably in both orthopedic and dental applications, but quality long-term clinical data remain scarce. Concerns about the effects of wear, crystalline degradation, crack propagation, and catastrophic fracture are still debated. The future of zirconia in biomedical applications will depend on the generation of these data to resolve concerns.

Recent studies have reported that sealers may alter the secretion of specific cytokines from THP1 monocytic cells in vitro. In this study, a cytokine array was used to determine if endodontic sealers changed secretion of 42 cytokines. White mineral trioxide aggregate (WMTA), MTA preparation (CS), AH-Plus (AHP), and Pulp Canal Sealer (PCS) were mixed, allowed to set for 72 h, then “aged” in buffered-saline for 12 weeks. Aged specimens were placed in direct contact with THP1 for 72 h and their cytotoxicity (MTT assay) was assessed. Materials that were not severely toxic were then exposed to THP1 with or without lipolysaccharide (LPS), and the culture medium was assayed for cytokine secretion. Secretion of cytokines was quantified using infrared scanning (Odyssey®); replicate pairs were averaged. PCS severely suppressed MTT activity and was not assessed for its influence on cytokine secretion. WMTA, CS, and AHP induced a broad-based increase in cytokine secretion (>20% vs. Teflon controls), but AHP induced the greatest increase (>100% in 17 of 42 cytokines). The effects of the sealers on LPS-activated THP1 were biphasic, with some increases and decreases cytokine secretion of >20%, but few larger effects. This work shows endodontic sealers may alter the secretion of a broad cross section of cytokines from monocytic cells. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2011.

Components of dental composites have been implicated as metabolic and oxidative stressors in cells. Antioxidant colloidal platinum nanoparticles (CPtN) could be useful as nanofillers that reduce cellular stress caused during placement and exposure to unpolymerized composite components. Yet, CPtN may have pro- or anti-oxidative properties depending on the chemical environment in which they are used. This study investigated the ability of CPtN to mitigate mitochondrial or oxidative stress induced by camphorquinone (CQ) and dimethylaminoethyl methacrylate (DMAEM), two components of dental composites that initiate light-activated addition polymerization. THP-1 human monocytic cells were exposed to subtoxic concentrations of CQ and DMAEM, then blue light for 0–60 s. Mitochondrial and oxidative stress were estimated 0, 6, or 24 h after irradiation by measuring cellular ATP or GSH levels, respectively. CPtN (0–20 ppm) were added prior to blue light irradiation. Statistically significant effects were determined by ANOVA with Tukey post-hoc analysis (α = 0.05). Light alone did not alter THP-1 activity, but CQ and DMAEM induced 120% increases in cell ATP levels, which was increased further (50%) by CPtN. Blue light irradiation caused a 50% drop in ATP levels, which increased to 75% when CPtN were added. GSH levels were suppressed by CQ/DMAEM and blue light, and CPtN increased suppression by 20–30%. CPtN did not mitigate mitochondrial or oxidative stress in THP-1, but amplified these stresses under the conditions tested. © 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2011.

The in vitro cytotoxicity of five endodontic sealers was measured >8-12 weeks using L929 mouse fibroblasts, osteoblastic cells (ROS) 17/2.8 rat osteoblasts, and MC3T3-E1 mouse osteoblasts. Discs (n = 6) of AH-plus Jet (AHP), two versions of Endo Rez (ER, ERx), Epiphany (EPH), and Pulp Canal Sealer (PCS) were prepared. The sealers and Teflon (Tf, negative control) were placed in direct contact with cells after immersion in phosphate-buffered saline for 1-12 wk. Cellular succinate dehydrogenase (SDH) activity was estimated using the MTT method (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, a yellow tetrazole), and activities were normalized to Teflon® controls. The cellular responses to the materials were compared using analysis of variance with Tukey posthoc analyses (α = 0.05). Initially, all sealers suppressed normalized SDH activity of L929 fibroblasts by >90%. After 12 weeks of immersion in saline, AHP exhibited the SDH activity above Tf (120%), followed by ERx (78%), ER (58%), PCS (38%), and EPH (28%), all statistically distinct (p < 0.05). In general, the three cell lines responded similarly to the sealers. However, AHP caused unique responses: ROS cells were significantly (p < 0.05) less sensitive initially, and AHP was severely cytotoxic to MC3T3 cells (

Background. Methods used by dental practitioners to diagnose and treat dentin hypersensitivity are not well documented. The authors conducted a survey of dentists in the Northwest Practice-based REsearch Collaborative in Evidence-based DENTistry (PRECEDENT) to ascertain the treatment methods they used. Methods. Via an Internet survey, the authors collected data regarding methods used for diagnosis and treatment of dentin hypersensitivity from 209 Northwest PRECEDENT dentists. Results. The PRECEDENT dentists indicated that they most often used fluoride varnishes and gels, advice regarding toothbrushing and diet, bonding agents, restorative materials and glutaraldehyde/2-hydroxyethyl methacrylate (HEMA) to treat dentin hypersensitivity. They reported that the most successful treatments were fluorides, glutaraldehyde/HEMA, bonding agents, potassium nitrates and restorative treatments; they considered observation, advice regarding toothbrushing and diet and laser therapy to be the least successful. Dentists listed fluorides, calcium phosphates, glutaraldehyde/HEMA and bonding agents as the treatments most desirable for inclusion in a future randomized clinical trial of dental hypersensitivity treatments. Conclusions. Dentists rely on patients to assess the severity of dentin hypersensitivity. Modalities for the diagnosis and treatment of hypersensitivity are diverse. Methods used to diagnose and treat dentin hypersensitivity in practice are challenging to justify. Clinical Implications. Practitioners should be aware of the diversity of methods available for diagnosing and treating dentin hypersensitivity as they manage the care of their patients with this condition.

In the biomedical field, palladium has primarily been used as a component of alloys for dental prostheses. However, recent research has shown the utility of palladium alloys for devices such as vascular stents that do not distort magnetic resonance images. Dental palladium alloys may contain minor or major percentages of palladium. As a minor constituent, palladium hardens, strengthens and increases the melting range of alloys. Alloys that contain palladium as the major component also contain copper, gallium and sometimes tin to produce strong alloys with high stiffness and relatively low corrosion rates. All current evidence suggests that palladium alloys are safe, despite fears about harmful effects of low-level corrosion products during biomedical use. Recent evidence suggests that palladium poses fewer biological risks than other elements, such as nickel or silver. Hypersensitivity to palladium alone is rare, but accompanies nickel hypersensitivity 90-100% of the time. The unstable price of palladium continues to influence the use of palladium alloys in biomedicine.

Amorphous peroxotitantes (APT) are insoluble titanium-based particles that bind a variety of metal compounds with high affinity; these particles could be sequestered locally in a solid phase to deliver metal-based drugs. Previous studies have confirmed the 'biodelivery' of metals from metal-APT complexes to fibroblasts, but not monocytes. Our goal in the current study was to use monocytic cytokine secretion to assess delivery of gold or platinum-based compounds from APT to human THP1 monocytes. Cytokine secretion was not triggered by APT alone or metal-APT complexes. In monocytes activated by lipopolysaccharide (LPS), APT alone enhanced or suppressed IL1beta or IL6 secretion, yet TNFalpha secretion was unaffected. Complexes of APT and Au(III) or cis-platin altered LPS-activated IL6 or IL1beta secretion most, TNFalpha least. Our results suggest that the APT deliver metals to monocytes.

Statement of problem A common technique used for making crown impressions involves use of a vinyl polysiloxane impression material in combination with a dual-arch tray. A leading dental manufacturer has reformulated its vinyl polysiloxane (VPS) impression line, but the accuracy of the new material has not been verified. Purpose The purpose of this study was to assess the accuracy of reformulated VPS impression materials using the single-step dual-arch impression technique. Material and Methods Dual-arch impressions were made on a typodont containing a master stainless steel standard crown preparation die, from which gypsum working dies were formed, recovered, and measured. The impression materials evaluated were Imprint 3 Penta Putty with Quick Step Regular Body (IP-0); Imprint 3 Penta Quick Step Heavy Body with Quick Step Light Body (IP-1); Aquasil Ultra Rigid Fast Set with LV Fast Set (AQ-1); and Aquasil Ultra Heavy Fast Set with XLV Fast Set (AQ-2) (n=10). All impressions were disinfected with CaviCide spray for 10 minutes prior to pouring with type IV gypsum. Buccolingual (BL), mesiodistal (MD), and occlusogingival (OG) dimensions were measured and compared to the master die using an optical measuring microscope. Linear dimensional change was also assessed for IP-0 and AQ-1 at 1 and 24 hours based on ANSI/ADA Specification No. 19. Single-factor ANOVA with Dunnett's T3 multiple comparisons was used to compare BL, MD, and OG changes, with hypothesis testing at α=.05. A repeated-measures ANOVA was used to compare linear dimensional changes. Results There were statistical differences among the 4 impression systems for 3 of 4 dimensions of the master die. IP-0 working dies were significantly larger in MD and OG-L dimensions but significantly smaller in the BL dimension. IP-1 working dies were significantly smaller in the BL dimension compared to the master die. With the exception of IP-0, differences detected were small and clinically insignificant. No significant differences were observed for linear dimensional change. Conclusions The single-step dual-arch impression technique produced working dies that were smaller in 3 of the 4 dimensions measured and may require additional die relief to achieve appropriate fit of cast restorations. Overall accuracy was acceptable for all impression groups with the exception of IP-0. (J Prosthet Dent 2009;101:332–341)

An in vitro model was used to test a hypothesis that the manual (apex locator) and motor-driven (apex locator-controlled handpiece) operating modes of 3 newly developed apex-locator-controlled handpiece devices (Dentaport ZX, Endomaster, XSmart Dual) give the same working length. The depth of penetration of the file into the root canal was measured using a digital micrometer and the distance of the tip of the file relative to the major root foramen was determined by scanning electron microscopy (SEM). In the manual mode, the XSmart Dual device reported significantly shorter working lengths than the Dentaport ZX or the Endomaster devices. In the motor-driven mode, the XSmart Dual device reported significantly longer working lengths than the Dentaport ZX but not the Endomaster. Most instruments driven by the handpieces were confined within the root canal and differences in working lengths between manual and motor-driven modes were small for all devices (tenths of millimeters). We concluded that although the motor-driven mode of these devices appeared to be clinically safe, measurements obtained in manual and motor-driven operating modes are not equivalent.

Nickel-containing alloys are used in dentistry because of their low cost, but poor corrosion behavior increases their risk of causing adverse biological responses. Intraorally, nickel-containing alloys accumulate bacterial plaque that triggers periodontal inflammation via toxins such as lipopolysaccharide (LPS). Recent evidence suggests that in monocytes, Ni(II) amplifies LPS-induced secretion of several cytokines that mediate periodontal destruction. Thus, we investigated the effects of Ni(II), with or without LPS, on the secretion of a broader array of cytokines from monocytes. We then measured monocytic expression of two proteins, Nrf2 and thioredoxin-1 (Trx1), that influence the regulation of cytokine secretion. Cytokine arrays were used to measure the effects of 0-50 microM Ni(II) on cytokine secretion from human THP1 monocytes, with or without LPS activation. Immunoblots were used to estimate Nrf2 and Trx1 levels. Our results indicate that both Ni(II) alone and Ni(II) with LPS have broad-based effects on cytokine secretion. Ni(II) increased Nrf2 levels by threefold, and LPS amplified the effects of Ni(II) by 10-fold. Trx1 levels did not change under any condition tested. Our results suggest that Ni(II)-induced changes in cytokine secretion by monocytes are diverse and may be influenced by Nrf2 but are not likely influenced by changes in whole-cell Trx1 levels.

AIM: To test the hypothesis that extending the time of a traditional ex vivo cytotoxicity test helps to identify trends in the behaviour of root core materials and sealers, which could ultimately aid in predicting their clinical safety and performance. METHODOLOGY: Endodontic sealers and core specimens were initially tested in direct contact with L929 fibroblasts for 72 h. Cell response was estimated by measuring cellular succinate dehydrogenase activity relative to Teflon controls. Cytotoxicity (% of more active cells) was reassessed after 1, 3, 4 and 6 weeks, with the specimens stored in a physiologically balanced salt-solution between tests. RESULTS: Distinct trends in cytotoxicity among both core materials and sealers were observed over the 6-week test. Four of the six sealers and two of the three core materials showed cell viabilities of 70% cytotoxicity). CONCLUSIONS: The current results suggest that some endodontic materials have an elevated biological risk for extended intervals.

Angioplasty with stent placement is commonly used to treat coronary atherosclerosis. However, 20-40% of stainless steel stents restenose within 6 months via a prolonged inflammatory response mediated by monocytic infiltration and cytokine secretion. In the current study, we tested a hypothesis that blood flow and monocytes interact to alter stent corrosion. We assessed the effects of THP1 monocytes on the corrosion rate of 316L stainless steel (316LSS) under shear stress (0.5-50 dyn/cm(2)). In addition, THP1 cytokine secretion was determined using cytokine arrays and ELISA analyses. Data were compared using ANOVA and Tukey post hoc analysis (alpha = 0.05). Monocytes significantly lowered 316LSS corrosion rates without limiting current density. However, shear stress alone did not alter the corrosion rate of 316LSS. THP1 cells adhered to the 316LSS surface at all flow rates. Exposure to the 316LSS/corrosion test under high fluid flow rates increased (>twofold) the secretion of 7 of the 42 cytokines tested (angeogenin, GRO, I309, interleukin 8, interleukin 6, interleukin 1beta, and macrophage chemoattractant protein-1). Each of these cytokines play a role in wound healing, macrophage differentiation, and cell proliferation, all hallmarks of in-stent restenosis. Furthermore, only IL8 levels were significantly higher than any of the system controls during the 316LSS/corrosion test conditions. The IL8 levels from the 316LSS/corrosion tests were not significantly different from the +LPS control. Together, these data suggest that monocytic cells maybe activated by exposure to 316LSS stents and could contribute to in-stent restenosis and altered corrosion of the stent.

Statement of problem Alloys with high nickel content have been increasingly used for dental prostheses. These alloys have excellent hardness, elastic modulus, and strength, yet have high corrosion rates when exposed to chemical or physical forces that are common intraorally. Purpose The purpose of the current study was to measure the susceptibility of several types of nickel-based alloys to brushing abrasion relative to gold- and palladium-based alloys. Material and methods Au-Pt, Au-Pd, Pd-Ag, Ni-Cr, and Ni-Cr-Be dental alloys were brushed with a toothbrush (Oral-B Soft) and toothpaste (Ultrabrite) in a linear brushing machine, then the surface roughness was measured by profilometry (R a , R v , R p ). Specimens (n=4) were brushed for 48 hours in a saline solution (pH 7). The effect of brushing was determined using 2-sided t tests (α=.05), and roughness among alloys postbrushing was compared using 1-way ANOVA with Tukey post hoc analyses (α=.05). Results All polished alloy surfaces (before brushing) had roughnesses of ≤0.1 μm (R a ). The Pd-Ag alloy was the most resistant to brushing. The Ni-Cr-Be alloy abraded the most, with a postbrushing surface roughness of >1 μm (R a ). Ni-Cr alloys without Be had a postbrushing surface roughness of 0.25 μm (R a ). Postbrushing roughness of all other alloys ranged from 0.1-0.25 μm (R a ). R v and R p values behaved similarly to R a values for all alloys. Conclusions Although they have many excellent mechanical properties, Ni-Cr-Be alloys may be prone to degradation from brushing. (J Prosthet Dent 2008;99:455-460)

Objectives Human blood levels of mercury are commonly 10 nM, but may transiently reach 50–75 nM after dental amalgam placement or removal. Controversy persists about the use of mercury because the effects of these ‘trace’ levels of mercury are not clear. Concentrations of mercury ≥5000 nM unequivocally alter redox balance in blood cells including monocytes. In the current study, we tested a hypothesis that concentrations of mercury

AIM: To evaluate the long-term sealing ability of four contemporary endodontic sealers [Pulp Canal Sealer (PCS), AH-Plus, GuttaFlow and Epiphany] using a fluid filtration technique. METHODOLOGY: The palatal roots of 40 human maxillary molar teeth were selected and the root canal was prepared using a crown-down technique (apical size 40, 6% taper). Roots were irrigated with 3% NaOCl, 17% EDTA solution and rinsed with distilled water. Canals were filled with either PCS, AH-Plus, GuttaFlow or Epiphany using a single-cone technique (n = 8). Twenty-four hours after filling, the roots were connected to an automatic flow-recording device (Flodec System) filled with double-distilled water under pressure (0.2 bar) to measure leakage. Flow rates were assessed at 6, 12 or 24-h and after 1-year of storage. RESULTS: None of the materials fully prevented fluid flow. Fluid flow decreased after 6 h and decreased further after 12 h. After 24 h, PCS and AH-Plus allowed significantly more fluid flow than GuttaFlow and Epiphany. After 1 year, PCS allowed significantly more fluid flow than the other materials. No significant changes in leakage occurred between 24 h and 1 year. CONCLUSIONS: GuttaFlow and Epiphany allowed less fluid movement along filled straight roots.

Summary Blue light curing units (wavelengths of 400–500 nm) are a mainstay of restorative dentistry, and several high-intensity light sources have been developed to polymerize resin composites more rapidly. The biological safety of visible light has been assumed, but some reports of adverse biological effects of blue light in non-dental contexts support further evaluation of the biological safety of high-intensity blue light. The current study tested the hypothesis that blue light provokes cell stress responses resulting in the secretion of cytokines or expression of heat-shock proteins (HSP) in monocytes. Human monocytic cells were irradiated with three light sources (quartz-tungsten-halogen, plasma-arc and laser), then cellular proliferation, secretion of the inflammatory cytokine TNFα and induction of HSP72 were measured. Results indicated that although all three light sources significantly inhibited proliferation of monocytes, the secretion of TNFα was not induced following exposure to blue light and was not potentiated with administration of the activator lipopolysaccharide. Similarly, treatment with the plasma-arc light, which caused the largest temperature increase in previous studies, did not induce HSP72. The current results do not support activation of monocytes by blue light as an inflammatory risk factor in dental tissues during curing of composites. However, the results of the current study should be further verified in primary monocytes and an animal model before decisions about clinical risks are made.

Resin composites are widely used in dentistry, and are polymerized in situ using a blue-light activated, free-radical polymerization mechanism. Blue light (400–500nm) is used to activate camphoroquinone (CQ), which decomposes to form free radicals that are stabilized by dimethyl-p-toludine (DMPT). CQ and DMPT are applied near tooth pulpal tissues and are irradiated during restorative procedures, suggesting that pulpal cells are exposed to free radicals. Because glutathione is a major component of the cellular redox management system, we tested the hypothesis that blue light irradiation would shift cellular glutathione redox balance of cells exposed to CQ and DMPT. We also measured NFκB activation, a redox-sensitive transcription factor that regulates inflammatory responses and glutathione synthetic enzyme levels. THP1 human monocytes were exposed to sublethal levels of CQ (0.4 mM) or DMPT (1.0 mM), with or without blue light exposure (25 J/cm2) from a quartz-tungsten-halogen source. The ratio of reduced to oxidized glutathione was measured using as assay based on 5,5′-dithio-bis(2-nitrobenszoic acid). NFκB transactivation was measured by transfection of an NFκB-containing plasmid linked to a luciferase reporter. Our results showed that blue light, CQ, or DMPT alone had no significant effect on cellular glutathione redox balance, but that the combination of these agents induced a marked oxidative bias, and reduced total glutathione levels up to 50%. On the other hand, light, CQ, and DMPT alone or in combination suppressed NFκB transactivation by >70%. Our results suggest that CQ and DMPT pose risks to pulpal tissues with or without blue light irradiation, and that multiple, interacting mechanisms shape the response to these agents. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res 2007

The biological response to dental restorative polymer composites is mediated by the release of unpolymerized residual monomers. Several new composite formulations claim to reduce unpolymerized residual mass. The current study assessed the cytotoxic responses to several of these new formations and compared them with more traditional formulations. Our hypothesis predicted that if these new polymerization chemistries reduce unpolymerized residual mass, the cytotoxicity of these materials also should be reduced relative to traditional formulations. Methods: Materials (HerculiteXRV, Premise, Filtek Supreme, CeramxDuo, Hermes, and Quixfil) were tested in vitro in direct contact with Balb mouse fibroblasts, initially, then after aging in artificial saliva for 0, 1, 3, 5, or 8 weeks. The toxicity was determined by using the MTT assay to the estimate SDH activity. Knoop hardness of the materials also was measured at 0 and 8 weeks to determine whether surface breakdown of the materials in artificial saliva contributed to cytotoxic responses. Results: Materials with traditional methacrylate chemistries (Herculite, Premise, Filtek Supreme) were severely (>50%) cytotoxic throughout the 8-week interval, but materials with newer chemistries or filling strategies (Hermes, CeramXDuo, and Quixfil) improved over time of aging in artificial saliva. Hermes showed the least cytotoxicity at 8 weeks, and was statistically equivalent to Teflon® negative controls. Hardness of the materials was unaffected by exposure to artificial saliva. Conclusions: Newer polymerization and filling strategies for dental composites show promise for reducing the release of unpolymerized components and cytotoxicity. © 2006 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2006

Metal ions are notorious environmental contaminants, some causing toxicity at exquisitely low (ppm-level) concentrations. Yet, the redox properties of metal ions make them attractive candidates for bio-therapeutics. Titanates are insoluble particulate compounds of titanium and oxygen with crystalline surfaces that bind metal ions; these compounds offer a means to scavenge metal ions in environmental contexts or deliver them in therapeutic contexts while limiting systemic exposure and toxicity. In either application, the toxicological properties of titanates are crucial. To date, the accurate measurement of the in vitro toxicity of titanates has been complicated by their particulate nature, which interferes with many assays that are optical density (OD)-dependent, and at present, little to no in vivo titanate toxicity data exist. Compatibility data garnered thus far for native titanates in vitro are inconsistent and lacking in mechanistic understanding. These data suggest that native titanates have little toxicity toward several oral and skin bacteria species, but do suppress mammalian cell metabolism in a cells-pecific manner. Titanate compounds bind several types of metal ions, including some common environmental toxins, and enhance delivery to bacteria or cells. Substantial work remains to address the practical applicability of titanates. Nevertheless, titanates have promise to serve as novel vehicles for metal-based therapeutics or as a new class of metal scavengers for environmental applications.

Nickel is a component of biomedical alloys that is released during corrosion and causes inflammation in tissues by as yet unknown mechanisms. Recent data show that Ni(II) at concentrations of 10-50 microM amplifies lipopolysaccharide-triggered, NFkappaB-mediated cytokine secretion from monocytes. In the current study, we tested the hypothesis that Ni(II) amplifies cytokine secretion by activating the Nrf2 antioxidant pathway rather than by enhancing activity of the NFkappaB signaling pathway. Human THP1 monocytes were exposed to Ni(II) concentrations of 10-30 microM for 6-72 h, then immunoblots of whole-cell lysates or cytosolic and nuclear proteins were used to detect changes in Nrf2 or NFkappaB signaling. Our results show that Ni(II) increased (by 1-2 fold) whole-cell Nrf2 levels and nuclear translocation of Nrf2, and amplified lipopolysaccharide (LPS)-induction of Nrf2 (by 3-5 fold), but had no detectable effect on the initial activation or nuclear translocation of NFkappaB. Because Nrf2 target gene products are known regulators of NFkappaB nuclear activity, our results suggest that Ni(II) may affect cytokine secretion indirectly via modulation of the Nrf2 pathway.

Thioredoxin reductase (TrxR) reduces thioredoxin (Trx), thereby contributing to cellular redox balance, facilitating the synthesis of deoxy-ribose sugars for DNA synthesis, and regulating redox-sensitive gene expression. Auranofin is a gold compound that potently inhibits TrxR. This inhibition is one suspected mechanism of auranofin’s therapeutic benefit in the treatment of rheumatoid arthritis. The use of other gold compounds to treat cancer or inflammatory disease may rely on their ability to inhibit TrxR. In the current study, we tested the hypothesis that a variety of gold compounds may inhibit TrxR. Methods: We exposed rat-TrxR1 to auranofin, gold sodium thiomalate, sodium aurothiosulfate, triphenyl phosphine gold chloride, or gold acetate, and measured TrxR activity ex vivo. We then compared TrxR1 inhibitory levels of gold compounds to those that inhibited mitochondrial activity of THP1 monocytes and OSC2 epithelial cells, estimated by succinate dehydrogenase activity. Results: All gold compounds inhibited TrxR1 at concentrations ranging from 5 to 4000 nM (50% inhibitory concentration). The oxidation state of gold did not correlate with inhibitory potency, but ligand configuration was important. Au(I)-phosphine compounds (triphenyl phosphine gold chloride and auranofin) were the most potent inhibitors of TrxR. All TrxR1 inhibitory concentrations were sublethal to mitochondrial activity in both THP1 and OSC2 cells. Conclusions: Diverse types of gold compounds may be effective inhibitors of TrxR1 at concentrations that do not suppress cellular mitochondrial function. Inhibition may be optimized to some degree by altering the ligand configuration of the compounds. These results support future study of a variety of Au compounds for therapeutic development as inhibitors of TrxR1.

A goal of treatment in periodontal therapy is to regenerate a new fibroblastic attachment rather than to repair lost attachment with a long junctional epithelium. To date, there is no evidence that fibroblastic attachment formed during regeneration is stronger or less susceptible to periodontal breakdown than a long junctional epithelial attachment. We measured the rate and strength of attachment of epithelial cells (NHEK) and periodontal ligament fibroblasts (PDLF) cultured individually and cocultured to dentin surfaces to determine which cell type has a faster attachment rate and greater adhesive strength to human dentin, and whether the cell types attach independently. Longitudinal dentin slices were seeded with either PDLF or NHEK for 2 or 24 h. The specimens were placed into a parallel plate flow chamber and defined laminar shear stresses were applied. Shear stress was created by step increases in fluid flow rate. Effluent fluid was collected and cell numbers (detached) were counted using a hemocytometer. Cocultures of PDLF and NHEK at three seeding ratios (10:1, 1:1, 1:10) were also tested. Each cell type attached equally well to polystyrene or dentin. PDLF showed a stronger attachment to polystyrene and dentin at 24 versus 2 h. NHEK attached to polystyrene or dentin equally well at 2 and 24 h. NHEK were more strongly attached after 2 h when compared to PDLF. PDLF were more strongly attached after 24 h versus NHEK. When NHEK and PDLF were seeded together on dentin at a 1:1 ratio, PDLF appeared to be more strongly attached than NHEK at 2 but not 24 h. At a ratio of 10 PDLF:1 NHEK, PDLF appeared to be more strongly attached at 2 and 24 h. At a ratio of 1 PDLF:10 NHEK, NHEK appeared to be more strongly attached at 2 h, but PDLF showed a trend of stronger attachment at 24 h. We conclude that epithelial cells attach more quickly to dentin surfaces than PDLF, but do not demonstrate increased attachment strength over time (PDLF do show increased attachment strength overtime). The purported advantages of periodontal regeneration over periodontal repair are supported by our results. Furthermore, our results support the concept of guided tissue regeneration. On the basis of on cellular competition experiments, epithelial cells and PDLF do not act independently, because epithelial cells enhanced the attachment rate of PDLF.

The transcription factor NFkappaB plays a key role in the tissue inflammatory response. Metal ions released into tissues from biomaterials (e.g., Au, Pd, Ni, Hg) are known to alter the binding of NFkappaB proteins to DNA, thereby modulating the effect of NFkappaB on gene activation and, ultimately, the tissue response to biomaterials. Little is known about the effect of these metals on key signaling steps prior to NFkappaB-DNA binding such as transcription factor activation or nuclear translocation, yet these steps are equally important to modulation of the pathway. Oxidative stress is known to alter NFkappaB proteins and is suspected to play a role in metal-induced NFkappaB signaling modulation. Our aim in the current study was to assess the effects of sublethal levels of Ni, Hg, Pd, and Au ions on NFkappaB activation and nuclear translocation in the monocyte, which is acknowledged as an important orchestrator of the biological response to materials and the pathogenesis of chronic disease. Sublethal concentrations of Au(III), Ni(II), Hg(II), and Pd(II) were added to cultures of human THP1 monocytic cells for 72 h. In parallel cultures, lipopolysaccharide (LPS) was added for the last 30 min to activate the monocytic cells. Then cellular cytoplasmic and nuclear proteins were isolated, separated by electrophoresis, and probed for IkappaBalpha degradation (activation) and NFkappaB p65 translocation. Protein levels were digitally quantified and statistically compared. The levels of reactive oxygen species (ROS) in the monocytic cells were measured as a possible mechanism of metal-induced NFkappaB modulation. Only Au(III) activated IkappaBalpha degradation by itself. Au(III) and Pd(II) enhanced LPS-induced IkappaBalpha degradation, but Hg(II) and Ni(II) suppressed it. Au(III), Ni(II), and Pd(II) activated p65 nuclear translocation without LPS, and all but Ni(II) enhanced LPS-induced translocation. Collectively, the results suggest that these metal ions alter activation and translocation of NFkappaB, each in a unique way at unique concentrations. Furthermore, even when these metals had no overt effects on signaling by themselves, all altered activation of signaling by LPS, suggesting that the biological effects of these metals on monocytic function may only be manifest upon activation. None of the metal ions elevated levels of ROS at 72 h, indicating that ROS were probably not direct modulators of the NFkappaB activation or translocation at this late time point.

Epigallocatechin-3-gallate (EGCG), the most abundant polyphenol in green tea, exerts chemopreventive effects by selectively inducing apoptosis in tumor cells. In contrast, EGCG accelerates terminal differentiation in normal human epidermal keratinocytes (NHEK) mediated partially by up-regulation of p57/KIP2, a cyclin-dependent kinase inhibitor that confers growth arrest and differentiation. However, it is unclear if EGCG modulates caspase 14, a unique regulator of epithelial cell terminal differentiation associated with cornification. Here, we examined the effect of EGCG on caspase 14 expression in NHEK and correlated the protein and mRNA expression of p57/KIP2 with those of caspase 14 in either normal keratinocytes or p57/KIP2-expressing tumor cells (OSC2, an oral squamous cell carcinoma cell line). Additionally, paraffin-embedded normal and untreated psoriatic (aberrant keratinization) skin sections from humans were assessed for caspase 14 by immunohistochemistry. In NHEK, EGCG induced the expression of caspase 14 mRNA and protein levels within a 24-h period. The expression of p57/KIP2 in OSC2 cells was adequate to induce caspase 14 in the absence of EGCG; this induction of caspase 14 was down-regulated by transforming growth factor-beta1. In human psoriatic skin samples, caspase 14 staining in the upper epidermis was reduced, especially in nuclear areas. These results suggest that, in addition to p57/KIP2, EGCG-induced terminal differentiation of epidermal keratinocytes involves up-regulation of caspase 14. Further understanding of how EGCG modulates cellular differentiation may be useful in developing green tea preparations for selected clinical applications.

Although the role of dental casting alloys has changed in recent years with the development of improved all-ceramic materials and resin-based composites, alloys will likely continue to be critical assets in the treatment of missing and severely damaged teeth. Alloy shave physical, chemical, and biologic properties that exceed other classes of materials. The selection of the appropriate dental casting alloy is paramount to the long-term success of dental prostheses,and the selection process has become complex with the development of many new alloys. However, this selection process is manageable if the practitioner focuses on the appropriate physical and biologic properties, such as tensile strength, modulus of elasticity,corrosion, and biocompatibility, and avoids dwelling on the less important properties of alloy color and short-term cost. The appropriate selection of an alloy helps to ensure a longer-lasting restoration and better oral health for the patient.

Resin-based materials are rapidly becoming the primary restorative material to replace tooth structure and the low percentage of biological problems reported for resin-based restorations is testimony to their relative biocompatibility. Despite considerable advances in the understanding of the mechanisms, which govern the integration of resin composite materials with the dentine-pulp complex, considerable potential for improvement remains. Most of these improvements centre around a better understanding of the biological and microbiological risks of resin materials and will only be possible with improved in vitro and in vivo models. There are also a number of possible future developments in materials, clinical techniques and diagnostic methods that may improve the long-term success and reliability of resin-based restorations. The remainder of this paper describes the most likely avenues for future improvements.

Titanium-based alloys form a surface reaction layer when cast. This study investigated the effect of the surface reaction layer on the cytotoxicity of novel Ti-based binary alloys. The cytotoxicities of the novel alloys were compared with commercially pure titanium, Ti-6Al-4V and Ti-6Al-7Nb. Cast discs with or without the reaction layer were first tested for cytotoxicity, then for elemental release into cell-culture medium. The elements released into the extracts were measured by means of an inductively coupled plasma atomic emission spectrometer. The commercial and novel binary Ti-based alloys showed no statistically significant cytotoxicity, although some trends were noted for several alloys. The presence of the reaction layer did not significantly alter the cytotoxicity. These favourable biocompatibility results show that these novel alloys have promise for use in dental restorations.

Plant-derived phenolic compounds, including polyphenols (e.g., tannins), flavonoids, and phenolic acids, have been under investigation for their anticancer therapeutic and chemoprevention properties. Recently, certain mechanisms underlying the differential effects of green tea polyphenols (GTPPs) on tumor versus normal cells have been determined. These suggest that GTPPs may simultaneously activate multiple pathways. However, existing screening methods are insufficient for the identification of agents that possess both a cytotoxic effect on tumor cells and a protective effect on normal cells. The current study describes the establishment of an in vitro survival/apoptosis testing system based on detecting these mechanisms by a double-fluorescence method. This system is able to screen potential chemopreventive or therapeutic agents from (but not limited to) plant-derived compounds based on the pathways differentially activated by the agents. Tumor cell death and normal cell survival are detected simultaneously, in a device that co-cultures normal human cells adjacent to human tumor cells.

Green tea polyphenols (GTPPs) are considered beneficial to human health, especially as chemopreventive agents. Recently, cytotoxic reactive oxygen species (ROS) were identified in tumor and certain normal cell cultures incubated with high concentrations of the most abundant GTPP, (-)-epigallocatechin-3-gallate (EGCG). If EGCG also provokes the production of ROS in normal epithelial cells, it may preclude the topical use of EGCG at higher doses. The current study examined the oxidative status of normal epithelial, normal salivary gland, and oral carcinoma cells treated with EGCG, using ROS measurement and catalase and superoxide dismutase activity assays. The results demonstrated that high concentrations of EGCG induced oxidative stress only in tumor cells. In contrast, EGCG reduced ROS in normal cells to background levels. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and 5-bromodeoxyuridine incorporation data were also compared between the two oral carcinoma cell lines treated by EGCG, which suggest that a difference in the levels of endogenous catalase activity may play an important role in reducing oxidative stress provoked by EGCG in tumor cells. It is concluded that pathways activated by GTPPs or EGCG in normal epithelial versus tumor cells create different oxidative environments, favoring either normal cell survival or tumor cell destruction. This finding may lead to applications of naturally occurring polyphenols to enhance the effectiveness of chemo/radiation therapy to promote cancer cell death while protecting normal cells.

Objectives . The aim of this study was to investigate the hypothesis that dental material components alter cytokine secretion from monocytes if applied for several weeks at sublethal doses. The current study significantly extended exposure times of monocytes to the components over times published in previous studies. These exposure times approached the estimated average life span of monocytes in the bloodstream. Methods . Human THP-1 monocytes were exposed to 2-hydroxyethylmethacrylate (HEMA, 0–1.2 mmol/l), triethyleneglycoldimethacrylate (TEGDMA, 0–0.75 mmol/l), Hg 2+ (0–2 μmol/l), or Ni 2+ (0–20 μmol/l) for 2 weeks. The cells were then collected and additionally incubated for 24 h, with or without bacterial lipopolysaccharide (LPS), a common component of dental plaque. TNF-α secretion from THP-1 was determined using by enzyme-linked immunosorbent assay. Results . None of the dental material components induced TNF-α from THP-1 by themselves, but LPS alone strongly induced TNF-α secretion as expected. HEMA and TEGDMA significantly suppressed (40–70%) TNF-α secretion from cells stimulated with LPS. Hg 2+ at 2.0 μmol/l doubled TNF-α secretion from THP-1s stimulated with LPS over LPS alone. Ni 2+ did not significantly affect TNF-α secretion, with or without LPS exposure. Significance . The results in this study suggest that sublethal, 2-week exposures of some dental material components may alter TNF-α secretion from THP-1 monocytes when the cells are challenged. These alterations may influence the biological response of tissues to materials in an inflammatory intraoral environment.

Objectives: The purpose of this research was to examine the influence of enamel matrix proteins (EMP) on the viability, proliferation, and attachment of periodontal ligament fibroblasts (PDLF) to diseased root surfaces. Materials and Methods: Primary cell cultures of PDFL were obtained from clinically healthy third molars or premolar teeth. Viability and proliferation rates were carried out over a 10-day period. A total of 80,000 cells were plated in 24-well plates followed by EMEM with 10% FBS (positive control) and EMEM plus EMP at 25, 50, 75, and 100 μg/ml. Cells were harvested on days 1, 3, 5, 7, and 10 and viability was performed utilizing an MTS assay. PDLF proliferation rates were assessed by a CyQUANT GR dye assay. SEM analysis was used to examine the qualitative effects of cellular attachment to diseased root surfaces following EMP compared to nontreated controls. Results: The results indicated that viability was negatively affected for higher doses over time while lower doses displayed viability effects similar to control. Proliferation, however, appeared to be ameliorated following exposure to EMP. The SEM analysis suggests that cellular attachment to diseased dentin was enhanced following EMP application. Conclusion: These in vitro studies support the concept that EMP may act as a suitable matrix for PDLF.

Metals are components of a variety of biomaterials used in orthopedic and dental appliances; however, their biocompatibility with the surrounding tissues is not completely understood. Monocytes are important immune cells that respond to inflammatory stimuli by rapidly producing a variety of inflammatory proteins. Regulation of this response often involves activation of the transcription factor NF kappa B. The current study was designed to determine whether monocyte activation of NF kappa B in response to bacterial lipopolysaccharide (LPS) is affected by pretreatment with metal ions. Concentrations of metal ions that affected cell number after 24 h of exposure were first determined. Then THP-1 human monocytes were cultured for 2 h in media containing metal ions at concentrations below levels that altered cell growth. Parallel cultures were treated with 10 microg/mL Escherichia coli LPS, and all samples were cultured an additional 2 h. Nuclear proteins were extracted and normalized amounts were incubated with [(32)P]-end-labeled NF kappa B consensus oligonucleotide. NF kappa B-DNA complexes were identified and quantified by electrophoretic mobility shift analysis. The extent of NF kappa B-DNA complex formation after metal ion pretreatment with or without LPS induction was compared to no treatment or LPS-only treated controls. Finally, LPS-induced IL1 beta secretion was measured from palladium-treated and control cells. Concentrations were identified for each metal ion (Ag(+), Co(2+), Cu(2+), Hg(2+), Ni(2+), and Pd(2+)) that did not reduce cell number after 24 h of exposure (ranging from 5 microM for Ag(+) and Hg(2+) to 200 microM for Ni(2+)). Exposures of 2 h at these concentrations did not alter cell morphology, staining with trypan blue, or cell number. LPS exposure had no effect on cell number with or without metal ions after 2 h. When metal treatment alone was assessed, none of the metal ions had a significant effect on NF kappa B-DNA binding. However, pretreatment with Co(2+), Ni(2+), Ag(1+), Hg(2+), and Pd(2+) significantly decreased NF kappa B-DNA binding by 40-70% versus LPS alone. Only Cu(2+) had no effect on LPS-induced NF kappa B-DNA complex formation. Pd(2+) lowered, but did not abolish, IL1 beta secretion at concentrations comparable to those that altered NF kappa B-DNA binding. These results suggest that many commonly used metals alter monocyte function at concentrations that are not overtly toxic, and that protein levels controlled in part by NF kappa B also may be altered.

The University of Washington School of Dentistry may be the first dental school in the nation to apply lean process management principles as a primary tool to re-engineer its operations and curriculum to produce the dentist of the future. The efficiencies realized through re-engineering will better enable the school to remain competitive and viable as a national leader of dental education. Several task forces conducted rigorous value stream analyses in a highly collaborative environment led by the dean of the school. The four areas undergoing evaluation and re-engineering were organizational infrastructure, organizational processes, curriculum, and clinic operations. The new educational model was derived by thoroughly analyzing the current state of dental education in order to design and achieve the closest possible ideal state. As well, the school's goal was to create a lean, sustainable operational model. This model aims to ensure continued excellence in restorative dental instruction and to serve as a blueprint for other public dental schools seeking financial stability in this era of shrinking state support and rising costs.

Dentine hypersensitivity is a significant burden for patients and practitioners. Knowing its prevalence and methods for accurate diagnosis is imperative to guide treatment decisions and develop new treatments. In this chapter, we describe the methods commonly used to diagnose dentine hypersensitivity including self-reports, clinical tests to elicit pain, and clinical examination to exclude other causes of tooth pain. The prevalence of dentine hypersensitivity is presented through a systematic review of the studies published since 1964. A wide range of estimates of prevalence of dentine hypersensitivity was observed in 56 studies, from as low as 1.8% to as high as 84%, and this heterogeneity could not be completely explained by study characteristics. The meta-analysis revealed that the average prevalence of all studies was 33% and the best estimate was approximately 10%.

Laser-ablation sector-field (high resolution) inductively coupled plasma mass spectrometry (LA-HR-ICP-MS) has been used for in situ determination and spatial elemental profiling of nickel concentrations in tissues that have been exposed to nickel wire. Nickel has a number of adverse biological effects that have made the use of nickel (or any other metal) in biomedical implants controversial. Yet, information about the distribution of nickel in tissues around nickel-containing implants is scarce. This study examines the diffusion of nickel with time and the spatial distribution of nickel around nickel-containing implants in vivo. Pure nickel wires were implanted subcutaneously into rats for seven days and the tissues were analyzed for nickel content and degree of inflammation away from the implants using 24Mg and 60Ni isotopes. Data were obtained by ablation with Nd:YAG laser operating in the UV region (266 nm and 213 nm) and element analysis with a high resolution ICP-MS. A 50 ppm glass standard (NIST-612) was also analyzed for the same isotopes. Quantification was performed by assuming a uniform nominal magnesium concentration value of 97 µg g−1 in untreated tissue and using 24Mg intensity for internal calibration. The precision (RSD%) of measurements for 24Mg for the NIST-612 Glass standard was within 3.8% to 4.6% and for the tissue samples was within 3.2% to 4.5%. The precision of analysis for 60Ni for the NIST-612 Glass standard was 5.4%. There was a significant penetration of nickel ions into tissues exposed to nickel wire implants. The concentration of nickel reached values as high as 60 µg g−1 near the implants, falling exponentially to undetectable levels 3–4 mm from the implants. The study showed that the laser ablation technique was well suited for analysis of soft tissues for metal ion content. This technique also allowed metal concentration spatial profiling as a function of time.

The short-term degradation of dental polymers and alloys in biological environments has been well documented, but recent evidence indicates that oral tissues may be chronically exposed to low levels of these released components. The effect of these chronic exposures on the ability of cells to respond to a subsequent challenge is not known. To investigate this idea, we exposed human THP-1 monocytes to sublethal concentrations of HEMA, TEGDMA, Hg2+, and Ni2+ for 2 weeks and then assessed the monocytic response to subsequent 24-h challenge with the same components at higher concentrations. Chronic (2 week) exposures of monocytes to HEMA and both metal ions significantly altered monocyte response to short-term (24 h) secondary exposures, even when overt effects of the chronic exposures were not apparent. However, cellular responses were highly variable depending on the material and its concentrations. For TEGDMA, no effects were seen. These results demonstrate that the chronic effects of materials must be considered even when the chronic exposure has no initial overt effect. The effect on cells may only be apparent if the cell is challenged by a secondary exposure. © 2002 Wiley Periodicals, Inc. J Biomed Mater Res 62: 237–243, 2002

Monocytes play a central role in the response of tissues to biomaterials. Monocytic cell lines such as the THP-1 cell line have been used extensively as models for primary monocytes (directly from blood) in biocompatibility research. However, little information exists about the appropriateness of these cell lines as models. Thus, the current study compared the biological response of both primary peripheral blood monocytes (PBMs) and the THP-1 cell line to four common components of dental materials known to be released into the oral environment: nickel ions, 2-hydroxyethyl methacrylate (HEMA), triethylene glycol dimethacrylate (TEGDMA), and 2,2-bis[4(2-hydroxy-3-methacryloloxy)-phenyl]propane (Bis-GMA). Comparisons were made by constructing dose-response curves for each type of monocyte and the four components. The 50% cytotoxicity values (TC50 values) were then statistically compared. In addition, the response of the monocytes to the materials with and without lipopolysaccharide (LPS) stimulation were assessed by measuring TNF-alpha secretion from the monocytes. The results showed that the PBMs were 5-10 times less sensitive than the THP-1 monocytes to these dental components, but that both cell lines ranked the components identically. TNF-alpha secretion from both types of monocytes often showed similar trends, although some inconsistent results were noted. The current study supports the use of THP-1s as a model for ranking the cytotoxicity of components of dental biomaterials. Furthermore, the secretory activity of PBMs appears to be generally well represented by the THP-1s. However, sufficient differences between these cell types exist to recommend confirmation of any critical results obtained with THP-1s using PBMs.

Few studies have investigated the ability of dental resins to induce cellular stress at sublethal concentrations. Cellular stress, especially in immune cells such as monocytes, may modulate the biological response to materials or the host's ability to respond to bacterially mediated inflammation. The current study examined the ability of sublethal concentrations of 2-hydroxylethylmethacrylate (HEMA) and triethyleneglycol dimethacrylate (TEGDMA) to induce heat shock protein 72 (HSP72) in human monocytes. HEMA and TEGDMA significantly suppressed heat-induced HSP72 expression, even at sublethal levels, but did not induce HSP72 by themselves. The results of the current study suggest that components released from dental resin could modulate the HSP stress response without altering cellular metabolic activity.