Search

This study was designed to get a broad estimate of the presence and the types of antimicrobial resistance genes across 52 simple ready-to-eat foods. It was also carried out to understand the benefits and drawbacks of using metagenomic sequencing, a fairly new technology, to study AMR genes. An antimicrobial is any substance that kills or inhibits the growth of microorganisms. It includes antibiotics which are used to treat bacterial infections in both humans and animals. Given the relevant selective pressures, the bacteria itself can change and find ways to survive the effects of an antimicrobials. This results in the bacteria becoming resistant to the ‘killing’ effects of antimicrobials and is known as ‘antimicrobial resistance’. The more we use antimicrobials and antibiotics and the way that we use them can increase the chance that bacteria will become resistant to antimicrobials. This is important as it can lead to infections that become more difficult to treat with drugs and poses a risk to the public health. T Addressing AMR is a national strategic priority for the UK Government which has led to the development of a new 20-year Vision for AMR and the 5-year National Action Plan (NAP), which runs until 2024. The NAP lays out how the UK will address the AMR challenge and takes a ‘One-Health’ approach which spans people, animals, agriculture, food and the environment. The NAP includes a specific section on the importance of better food safety to limit the contamination of foods and spread of AMR. This section emphasises the need to strengthen the evidence base for AMR and food safety through research, surveillance and promoting good practice across the food chain. The FSA is playing its part by continuing to fill evidence gaps on the role that food plays in AMR through the commissioning of research and surveillance. We are also promoting and improving UK food hygiene (‘4Cs’ messages) across the food chain that will help reduce exposure to AMR bacteria.

Knowledge of periparturient longitudinal changes in sow microbiota composition is necessary to fully understand her role in the development of the piglet microbiota, but also to improve gut health and performance of the sow in lactation. Primiparous sows face the challenge of partitioning nutrients to support maternal growth in addition to supporting foetal growth and the demands of lactation. Additional metabolic stress present during the periparturient period may induce changes in the microbiota profile between primiparous and multiparous sows. Using 16S rRNA gene sequencing, the study aimed to characterise the longitudinal changes in the periparturient microbiota and identify differences within the sow microbiota profile associated with parity. Faecal samples from primiparous (n = 13) and multiparous (n = 16) sows were collected at four different time points (day - 6, - 1, 3 and 8) in relation to farrowing (day 0). Microbiota richness was lowest on day 3 and - 1 of the periparturient period (P

The gastrointestinal tract microbiota interacts with the host to modulate metabolic phenotype. This interaction could provide insights into why some low birthweight pigs can exhibit compensatory growth whilst others remain stunted. This study aimed to identify microbiota markers associated with birthweight [low birthweight (n = 13) or normal birthweight pigs (n = 13)] and performance [“good” or “poor” average daily gain (ADG) class]. Furthermore, the study determined whether the taxonomic markers were longitudinal, or time point specific in their ability to identify low birthweight pigs who could exhibit compensatory growth. Faecal samples were collected and liveweight recorded at 10 different time points from birth to 56 days of age. No consistent associations between birthweight, performance and gut microbiota were found across all time points. However, there was a significant (P < 0.05) effect of birthweight on microbiota richness at 21, 27, 32 and 56 days of age. Significant differences (P < 0.05) in genera abundance according to birthweight and performance were also identified. Low birthweight pigs had a significantly (P < 0.05) lower abundance of Ruminococcaceae UCG-005, but a significantly (P < 0.05) higher abundance of Ruminococcaceae UCG-014 on days 21 and 32, respectively. Piglets classified as having a “good” ADG class had a significantly (P < 0.05) higher abundance of Lactobacillus, unclassified Prevotellaceae and Ruminococcaceae UCG-005 on days 4, 8 and 14, respectively. Furthermore, Ruminococcaceae UCG-005 was significantly more abundant at 14 days of age in normal birthweight pigs with a “good” ADG class compared to those classified as “poor.” The results of this study indicate that there are time point-specific differences in the microbiota associated with birthweight and performance, corresponding to the period in which solid feed intake first occurs. Identifying early-life microbiota markers associated with performance emphasises the importance of the neonatal phase when considering intervention strategies aimed at promoting performance.

Botulinum neurotoxins (BoNTs) produced by the anaerobic bacterium Clostridium botulinum are the most potent biological substances known to mankind. BoNTs are the agents responsible for botulism, a rare condition affecting the neuromuscular junction and causing a spectrum of diseases ranging from mild cranial nerve palsies to acute respiratory failure and death. BoNTs are a potential biowarfare threat and a public health hazard, since outbreaks of foodborne botulism are caused by the ingestion of preformed BoNTs in food. Currently, mathematical models relating to the hazards associated with C. botulinum , which are largely empirical, make major contributions to botulinum risk assessment. Evaluated using statistical techniques, these models simulate the response of the bacterium to environmental conditions. Though empirical models have been successfully incorporated into risk assessments to support food safety decision making, this process includes significant uncertainties so that relevant decision making is frequently conservative and inflexible. Progression involves encoding into the models cellular processes at a molecular level, especially the details of the genetic and molecular machinery. This addition drives the connection between biological mechanisms and botulism risk assessment and hazard management strategies. This review brings together elements currently described in the literature that will be useful in building quantitative models of C. botulinum neurotoxin production. Subsequently, it outlines how the established form of modeling could be extended to include these new elements. Ultimately, this can offer further contributions to risk assessments to support food safety decision making.

In this paper, an automatic segmentation algorithm based on the threshold technique was designed for the image segmentation of bananas in a crate. The pixels of banana and background were selected discretely in the manually segmented regions, and subsequently, nine color features were extracted from RGB, HSV and CIE L*a*b* color space. Three thresholds, which were determined by statistical analysis of B, L* and b* color channel, were used for the design of the automatic segmentation algorithm. The intuitive comparison was applied for the qualitative assessment of segmentation performance. The results showed that the outlines of manually segmented and automatically segmented regions were almost similar to each other. The quantitative evaluation of segmentation performance was carried out by area ratio, and the results demonstrated that the average area ratio of 10 tested samples was more than 80%. These two tested results indicated that the performance of this automatic segmentation algorithm might be acceptable, and this methodology could provide a key technology to realize the real-time quality monitoring and control system in banana ripening rooms. Practical Applications An automatic image segmentation developed in the current study provides the potential of segmenting the bananas in a crate with the plastic bag. The algorithm is designed on the basis of a multiple threshold approach, thus allowing the high segmentation speed and accuracy. The obtained results demonstrated that the proposed multiple threshold-based segmentation algorithm could be used for achieving in situ quality monitoring and control system in banana ripening rooms.

Ruminococcus gnavus is a human gut symbiont wherein the ability to degrade mucins is mediated by an intramolecular trans-sialidase (RgNanH). RgNanH comprises a GH33 catalytic domain and a sialic acid-binding carbohydrate-binding module (CBM40). Here we used glycan arrays, STD NMR, X-ray crystallography, mutagenesis and binding assays to determine the structure and function of RgNanH_CBM40 (RgCBM40). RgCBM40 displays the canonical CBM40 β-sandwich fold and broad specificity towards sialoglycans with millimolar binding affinity towards α2,3- or α2,6-sialyllactose. RgCBM40 binds to mucus produced by goblet cells and to purified mucins, providing direct evidence for a CBM40 as a novel bacterial mucus adhesin. Bioinformatics data show that RgCBM40 canonical type domains are widespread among Firmicutes. Furthermore, binding of R. gnavus ATCC 29149 to intestinal mucus is sialic acid mediated. Together, this study reveals novel features of CBMs which may contribute to the biogeography of symbiotic bacteria in the gut., The mucus layer is an important physical niche within the gut which harbours a distinct microbial community. Here the authors show that specific carbohydrate-binding modules associated with bacterial carbohydrate-active enzymes are mucus adhesins that target regions of the distal colon rich in sialomucins.

The mucus layer covering the gastrointestinal tract is the first point of contact of the intestinal microbiota with the host. Cell surface macromolecules are critical for adherence of commensal bacteria to mucus but structural information is scarce. Here we report the first molecular and structural characterization of a novel cell-surface protein, Lar_0958 from Lactobacillus reuteri JCM 1112(T) , mediating adhesion of L. reuteri human strains to mucus. Lar_0958 is a modular protein of 133 kDa containing six repeat domains, an N-terminal signal sequence and a C-terminal anchoring motif (LPXTG). Lar_0958 homologues are expressed on the cell-surface of L. reuteri human strains, as shown by flow-cytometry and immunogold microscopy. Adhesion of human L. reuteri strains to mucus in vitro was significantly reduced in the presence of an anti-Lar_0958 antibody and Lar_0958 contribution to adhesion was further confirmed using a L. reuteri ATCC PTA 6475 lar_0958 KO mutant (6475-KO). The X-ray crystal structure of a single Lar_0958 repeat, determined at 1.5 A resolution, revealed a divergent immunoglobulin (Ig)-like β-sandwich fold, sharing structural homology with the Ig-like inter-repeat domain of internalins of the food borne pathogen Listeria monocytogenes. These findings provide unique structural insights into cell-surface protein repeats involved in adhesion of Gram-positive bacteria to the intestine.

Summary The mucus layer covering the gastrointestinal (GI) epithelium is critical in selecting and maintaining homeostatic interactions with our gut bacteria. However, the underpinning mechanisms of these interactions are not understood. Here, we provide structural and functional insights into the canonical mucus-binding protein (MUB), a multi-repeat cell-surface adhesin found in Lactobacillus inhabitants of the GI tract. X-ray crystallography together with small-angle X-ray scattering demonstrated a ‘beads on a string’ arrangement of repeats, generating 174 nm long protein fibrils, as shown by atomic force microscopy. Each repeat consists of tandemly arranged Ig- and mucin-binding protein (MucBP) modules. The binding of full-length MUB was confined to mucus via multiple interactions involving terminal sialylated mucin glycans. While individual MUB domains showed structural similarity to fimbrial proteins from Gram-positive pathogens, the particular organization of MUB provides a structural explanation for the mechanisms in which lactobacilli have adapted to their host niche by maximizing interactions with the mucus receptors, potentiating the retention of bacteria within the mucus layer. Together, this study reveals functional and structural features which may affect tropism of microbes across mucus and along the GI tract, providing unique insights into the mechanisms adopted by commensals and probiotics to adapt to the mucosal environment.

Plant–microbe interactions in the rhizosphere have important roles in biogeochemical cycling, and maintenance of plant health and productivity, yet remain poorly understood. Using RNA-based metatranscriptomics, the global active microbiomes were analysed in soil and rhizospheres of wheat, oat, pea and an oat mutant (sad1) deficient in production of anti-fungal avenacins. Rhizosphere microbiomes differed from bulk soil and between plant species. Pea (a legume) had a much stronger effect on the rhizosphere than wheat and oat (cereals), resulting in a dramatically different rhizosphere community. The relative abundance of eukaryotes in the oat and pea rhizospheres was more than fivefold higher than in the wheat rhizosphere or bulk soil. Nematodes and bacterivorous protozoa were enriched in all rhizospheres, whereas the pea rhizosphere was highly enriched for fungi. Metabolic capabilities for rhizosphere colonisation were selected, including cellulose degradation (cereals), H2 oxidation (pea) and methylotrophy (all plants). Avenacins had little effect on the prokaryotic community of oat, but the eukaryotic community was strongly altered in the sad1 mutant, suggesting that avenacins have a broader role than protecting from fungal pathogens. Profiling microbial communities with metatranscriptomics allows comparison of relative abundance, from multiple samples, across all domains of life, without polymerase chain reaction bias. This revealed profound differences in the rhizosphere microbiome, particularly at the kingdom level between plants.

Clostridium botulinum produces botulinum neurotoxins (BoNTs), highly potent substances responsible for botulism. Currently, mathematical models of C. botulinum growth and toxigenesis are largely aimed at risk assessment and do not include explicit genetic information beyond group level but integrate many component processes, such as signalling, membrane permeability and metabolic activity. In this paper we present a scheme for modelling neurotoxin production in C. botulinum Group I type A1, based on the integration of diverse information coming from experimental results available in the literature. Experiments show that production of BoNTs depends on the growth-phase and is under the control of positive and negative regulatory elements at the intracellular level. Toxins are released as large protein complexes and are associated with non-toxic components. Here, we systematically review and integrate those regulatory elements previously described in the literature for C. botulinum Group I type A1 into a population dynamics model, to build the very first computational model of toxin production at the molecular level. We conduct a validation of our model against several items of published experimental data for different wild type and mutant strains of C. botulinum Group I type A1. The result of this process underscores the potential of mathematical modelling at the cellular level, as a means of creating opportunities in developing new strategies that could be used to prevent botulism; and potentially contribute to improved methods for the production of toxin that is used for therapeutics., Author Summary Clostridium botulinum produces botulinum neurotoxins (BoNTs), highly potent substances responsible for botulism. Currently, mathematical models of C. botulinum growth and toxigenesis are largely aimed at risk assessment and do not include explicit genetic information. In this paper we present modelling based on the integration of diverse information from experimental results available in the literature. Experiments show that production of BoNTs depends on the growth-phase and is under the control of positive and negative regulatory elements at the intracellular level. Here, we integrate these regulatory elements into a combined model of population dynamics and gene regulation to build the first computational model of toxin production at the molecular level. We conduct a validation of our model against several items of published experimental data for different wild type and mutant strains of C. botulinum Group I type A1. The result of this process underscores the potential of mathematical modelling at the cellular level, as a means of creating opportunities that could be used to prevent botulism, and potentially contribute to improved methods for the production of toxin used for therapeutics.

The gastrointestinal mucus layer is colonized by a dense community of microbes catabolizing dietary and host carbohydrates during their expansion in the gut. Alterations in mucosal carbohydrate availability impact on the composition of microbial species. Ruminococcus gnavus is a commensal anaerobe present in the gastrointestinal tract of >90% of humans and overrepresented in inflammatory bowel diseases (IBD). Using a combination of genomics, enzymology and crystallography, we show that the mucin-degrader R. gnavus ATCC 29149 strain produces an intramolecular trans-sialidase (IT-sialidase) that cleaves off terminal α2-3-linked sialic acid from glycoproteins, releasing 2,7-anhydro-Neu5Ac instead of sialic acid. Evidence of IT-sialidases in human metagenomes indicates that this enzyme occurs in healthy subjects but is more prevalent in IBD metagenomes. Our results uncover a previously unrecognized enzymatic activity in the gut microbiota, which may contribute to the adaptation of intestinal bacteria to the mucosal environment in health and disease., Mucosal sialoglycans contribute to host–microbe interactions at mucosal surfaces and impact bacterial colonization of the digestive system. Here the authors identify and characterize an intramolecular trans-sialidase produced by the gut bacterium R. gnavus ATCC 29149 that may contribute to adaptation to the mucosal environment.

With the completion of the sequencing of the Arabidopsis genome and the recent advances in proteomic technology, the identification of proteins from highly complex mixtures is now possible. Rather than using gel electrophoresis and peptide mass fingerprinting, we have used multidimensional protein identification technology (MudPIT) to analyse the "tightly-bound" proteome for purified cell walls from Arabidopsis cell suspension cultures. Using bioinformatics for the prediction of signal peptides for targeting to the secretory pathway and for the absence of ER retention signal, 89 proteins were selected as potential extracellular proteins. Only 33% of these were identified in previous proteomic analyses of Arabidopsis cell walls. A functional classification revealed that a large proportion of the proteins were enzymes, notably carbohydrate active enzymes, peroxidases and proteases. Comparison of all the published proteomic analyses for the Arabidopsis cell wall identified 268 non-redundant genes encoding wall proteins. Sixty of these (22%) were derived from our analysis of tightly-bound wall proteins.

This year marks the 50th anniversary of Crick's seminal paper on the packing of alpha-helices into coiled-coil structures. The central tenet of Crick's work is the interdigitation of side chains, which directs the helix-helix interactions; so called knobs-into-holes packing. Subsequent determinations of coiled-coil-protein sequences and structures confirmed the key features of Crick's model and established it as a fundamental concept in structural biology. Recently, we developed a program, SOCKET, to recognise knobs-into-holes packing in protein structures, which we applied to the Protein Data Bank to compile a database of coiled-coil structures. In addition to classic structures, the database reveals 4-helix bundles and larger helical assemblies. Here, we describe how the more-complex structures can be understood by extending Crick's principles for classic coiled coils. In the simplest case, each helix of a 2-stranded structure contributes a single seam of (core) knobs-into-holes to the helical interface. 3-, 4-, and 5-Stranded structures, however, are best considered as rings of helices with cycles of knobs-into-holes. These higher-order oligomers make additional (peripheral) knobs-into-holes that broaden the helical contacts. Combinations of core and peripheral knobs may be assigned to different sequence repeats offset within the same helix. Such multiple repeats lead to multi-faceted helices, which explain structures above dimers. For instance, coiled-coil oligomer state correlates with the offset of the different repeats along a sequence. In addition, certain multi-helix assemblies can be considered as conjoined coiled coils in which multi-faceted helices participate in more than one coiled-coil motif.

Coiled-coil motifs foster a wide variety of protein– protein interactions. Canonical coiled coils are based on 7-residue repeats, which guide the folding and assembly of amphipathic -helices. In many cases such repeats remain unbroken for tens to hundreds of residues. However, the sequences of an increasing number of putative and characterised coiled coils digress from this pattern. We probed the consequences of nonheptad inserts using a designed leucine-zipper system. The parent peptide, SKIP0, which had four contiguous heptads, was confirmed as a parallel homodimer by circular dichroism spectroscopy and analytical ultracentrifugation. Seven daughter peptides were constructed in which 1 to 7 alanine residues were inserted between the central heptads of SKIP0. Like SKIP0, SKIP7 formed a stable helical dimer, but the other peptides were highly destabilised, with the order of dimer stability SKIP4 SKIP5 > SKIP6 > SKIP3 > SKIP2 > SKIP1. These results are consistent with an extended theory of coiled-coil assembly in which coiled-coil-compatible motifs are based on 3- and 4-residue spacings and most notably heptad (7-residue) and hendecad (11-residue) repeats. Thus, they help explain why in natural sequences, inserts after canonical heptad repeats most commonly comprise 4 residues. Possible biological roles for nonheptad inserts are discussed. © 2002 Elsevier Science (USA)

The mucus layer covering the gastrointestinal tract is the first point of contact of the intestinal microbiota with the host. Cell surface macromolecules are critical for adherence of commensal bacteria to mucus but structural information is scarce. Here we report the first molecular and structural characterization of a novel cell-surface protein, Lar_0958 from Lactobacillus reuteri JCM 1112(T) , mediating adhesion of L. reuteri human strains to mucus. Lar_0958 is a modular protein of 133 kDa containing six repeat domains, an N-terminal signal sequence and a C-terminal anchoring motif (LPXTG). Lar_0958 homologues are expressed on the cell-surface of L. reuteri human strains, as shown by flow-cytometry and immunogold microscopy. Adhesion of human L. reuteri strains to mucus in vitro was significantly reduced in the presence of an anti-Lar_0958 antibody and Lar_0958 contribution to adhesion was further confirmed using a L. reuteri ATCC PTA 6475 lar_0958 KO mutant (6475-KO). The X-ray crystal structure of a single Lar_0958 repeat, determined at 1.5 Å resolution, revealed a divergent immunoglobulin (Ig)-like β-sandwich fold, sharing structural homology with the Ig-like inter-repeat domain of internalins of the food borne pathogen Listeria monocytogenes. These findings provide unique structural insights into cell-surface protein repeats involved in adhesion of Gram-positive bacteria to the intestine.

The coiled coil is arguably the simplest protein-structure motif and probably the most ubiquitous facilitator of protein-protein interactions. Coiled coils comprise two or more alpha-helices that wind around each other to form "supercoils". The hallmark of most coiled coils is a regular sequence pattern known as the heptad repeat. Despite this apparent simplicity and relatedness at the sequence level, coiled coils display a considerable degree of structural diversity: the helices may be arranged parallel or anti-parallel and may form a variety of oligomer states. To aid studies of coiled coils, we developed SOCKET, a computer program to identify these motifs automatically in protein structures. We used SOCKET to gather a set of unambiguous coiled-coil structures from the RCSB Protein Data Bank. Rather than searching for sequence features, the algorithm recognises the characteristic knobs-into-holes side-chain packing of coiled coils; this proved to be straightforward to implement and was able to distinguish coiled coils from the great majority of helix-helix packing arrangements observed in globular domains. SOCKET unambiguously defines coiled-coil helix boundaries, oligomerisation states and helix orientations, and also assigns heptad registers. Structures retrieved from the Protein Data Bank included parallel and anti-parallel variants of two, three and four-stranded coiled coils, one example of a parallel pentamer and a small number of structures that extend the classical description of a coiled coil. We anticipate that our structural database and the associated sequence data that we have gathered will be of use in identifying principles for coiled-coil assembly, prediction and design. To illustrate this we give examples of sequence and structural analyses of the structures that are possible using the new data bases, and we present amino acid profiles for the heptad repeats of different motifs.

The coiled coil is a ubiquitous protein-folding motif. It generally is accepted that coiled coils are characterized by sequence patterns known as heptad repeats. Such patterns direct the formation and assembly of amphipathic alpha-helices, the hydrophobic faces of which interface in a specific manner first proposed by Crick and termed "knobs-into-holes packing". We developed software, SOCKET, to recognize this packing in protein structures. As expected, in a trawl of the protein data bank, we found examples of canonical coiled coils with a single contiguous heptad repeat. In addition, we identified structures with multiple, overlapping heptad repeats. This observation extends Crick's original postulate: Multiple, offset heptad repeats help explain assemblies with more than two helices. Indeed, we have found that the sequence offset of the multiple heptad repeats is related to the coiled-coil oligomer state. Here we focus on one particular sequence motif in which two heptad repeats are offset by two residues. This offset sets up two hydrophobic faces separated by approximately 150 degrees -160 degrees around the alpha-helix. In turn, two different combinations of these faces are possible. Either similar or opposite faces can interface, which leads to open or closed multihelix assemblies. Accordingly, we refer to these two forms as alpha-sheets and alpha-cylinders. We illustrate these structures with our own predictions and by reference to natural variants on these designs that have recently come to light.

Pneumothorax is a common complication in cystic fibrosis and is associated with worsening of lung function. However, bilateral simultaneous pneumothorax in cystic fibrosis is a rare condition. We describe the case of a 17-year-old female with cystic fibrosis who presented with spontaneous pneumothorax. Clinically, she presented right-sided chest pain and progressive breathlessness. The pneumothorax failed to resolve after the initial treatment (chest drainage). However, the patient was later successfully treated with additional chest drainage and talc pleurodesis. We also discuss the etiology and management of pneumothorax in patients with cystic fibrosis, since pneumothorax is associated with increased morbidity and mortality among such patients.O pneumotórax é uma complicação comum na fibrose cística e está associado com a piora da função pulmonar. Entretanto, o pneumotórax simultâneo bilateral na fibrose cística é um achado raro. Nesse artigo é descrito o caso de uma paciente de 17 anos com fibrose cística que cursou com pneumotórax espontâneo simultâneo bilateral. Clinicamente ela apresentou dor torácica à direita e dificuldade respiratória progressiva. Embora o pneumotórax não tenha respondido bem ao tratamento inicial (drenagem torácica), ela foi posteriormente tratada com drenagem e pleurodese com talco, com sucesso. São discutidos também a etiologia e a conduta nesta condição, que está associada com o aumento da morbidade e mortalidade.

Cytoplasmic dynein is the major minus end-directed microtubule motor in eukaryotes. However, there is little structural insight into how different cargos are recognized and linked to the motor complex. Here we describe the 2.2 Å resolution crystal structure of a cargo-binding region of the dynein adaptor Bicaudal-D (BicD), which reveals a parallel coiled-coil homodimer. We identify a shared binding site for two cargo-associated proteins—Rab6 and the RNA-binding protein Egalitarian (Egl)—within a region of the BicD structure with classical, homotypic core packing. Structure-based mutagenesis in Drosophila provides evidence that occupancy of this site drives association of BicD with dynein, thereby coupling motor recruitment to cargo availability. The structure also contains a region in which, remarkably, the same residues in the polypeptide sequence have different heptad registry in each chain. In vitro and in vivo analysis of a classical Drosophila dominant mutation reveals that this heterotypic region regulates the recruitment of dynein to BicD. Our results support a model in which the heterotypic segment is part of a molecular switch that promotes release of BicD autoinhibition following cargo binding to the neighboring, homotypic coiled-coil region. Overall, our data reveal a pivotal role of a highly asymmetric coiled-coil domain in coordinating the assembly of cargo–motor complexes.

Polarized growth in eukaryotes requires polar multiprotein complexes. Here, we establish that selection and maintenance of cell polarity for growth also requires a dedicated multiprotein assembly in the filamentous bacterium, Streptomyces coelicolor . We present evidence for a tip organizing center and confirm two of its main components: Scy ( Streptomyces cytoskeletal element), a unique bacterial coiled-coil protein with an unusual repeat periodicity, and the known polarity determinant DivIVA. We also establish a link between the tip organizing center and the filament-forming protein FilP. Interestingly, both deletion and overproduction of Scy generated multiple polarity centers, suggesting a mechanism wherein Scy can both promote and limit the number of emerging polarity centers via the organization of the Scy-DivIVA assemblies. We propose that Scy is a molecular “assembler,” which, by sequestering DivIVA, promotes the establishment of new polarity centers for de novo tip formation during branching, as well as supporting polarized growth at existing hyphal tips.

We have analysed a database of 40 well-refined high-resolution protein structures in order to study the distribution of interactions between charged residues mediated by water molecules i.e. solvent mediated ion interactions. These occur both within one protein molecule and between protein molecules in the crystal environment We find that most occur between residues of unlike charge although some are found between two negatively charged residues. Those between unlike charges occur more frequently than expected by random interactions.

13 páginas, 5 figuras, 1 figura S, 2 tablas, 3 tablas S, The multicellular nature of plants requires that cells should communicate in order to coordinate essential functions. This is achieved in part by molecular flux through pores in the cell wall, called plasmodesmata. We describe the proteomic analysis of plasmodesmata purified from the walls of Arabidopsis suspension cells. Isolated plasmodesmata were seen as membrane-rich structures largely devoid of immunoreactive markers for the plasma membrane, endoplasmic reticulum and cytoplasmic components. Using nano-liquid chromatography and an Orbitrap ion-trap tandem mass spectrometer, 1341 proteins were identified. We refer to this list as the plasmodesmata- or PD-proteome. Relative to other cell wall proteomes, the PD-proteome is depleted in wall proteins and enriched for membrane proteins, but still has a significant number (35%) of putative cytoplasmic contaminants, probably reflecting the sensitivity of the proteomic detection system. To validate the PD-proteome we searched for known plasmodesmal proteins and used molecular and cell biological techniques to identify novel putative plasmodesmal proteins from a small subset of candidates. The PD-proteome contained known plasmodesmal proteins and some inferred plasmodesmal proteins, based upon sequence or functional homology with examples identified in different plant systems. Many of these had a membrane association reflecting the membranous nature of isolated structures. Exploiting this connection we analysed a sample of the abundant receptor-like class of membrane proteins and a small random selection of other membrane proteins for their ability to target plasmodesmata as fluorescently-tagged fusion proteins. From 15 candidates we identified three receptor-like kinases, a tetraspanin and a protein of unknown function as novel potential plasmodesmal proteins. Together with published work, these data suggest that the membranous elements in plasmodesmata may be rich in receptor-like functions, and they validate the content of the PD-proteome as a valuable resource for the further uncovering of the structure and function of plasmodesmata as key components in cell-to-cell communication in plants, LF-C was fully supported and CF and AJM were part-supported by a UK Biotechnology and Biological Sciences Research Council (BBSRC) responsive mode grant (Grant No. BB/D017998/1). John Innes Centre is grant-aided by the BBSRC

In recent years, a number of bacterial coiled-coil proteins have been characterised which have roles in cell growth and morphology. Several have been shown to have a cytoskeletal function and some have been proposed to have an IF-like character in particular. We recently demonstrated in Streptomyces coelicolor a cytoskeletal role of Scy, a large protein implicated in filamentous growth, whose sequence is dominated by an unusual coiled-coil repeat. We present a detailed analysis of this 51-residue repeat and conclude that it is likely to form a parallel dimeric non-canonical coiled coil based on hendecads but with regions of local underwinding reflecting highly periodic modifications in the sequence. We also demonstrate that traditional sequence similarity searching is insufficient to identify all but the close orthologues of such repeat-dominated proteins, but that by an analysis of repeat periodicity and composition, remote homologues can be found. One clear candidate, despite a great size discrepancy and unremarkable sequence identity, is the known filament-former FilP in the same species. Both proteins appear distinct from the archetypal bacterial IF-like protein; they therefore may constitute a new class of bacterial filamentous protein. The similar sequence characteristics of both suggest their likely oligomer state and a possible mechanism for higher-order assembly into filaments. Another remote homologue in Actinomyces was highlighted by this method. Further, a known coiled-coil protein, DivIVA, appears to share some of these sequence characteristics.

Interest payments on Australia’s foreign debt are decomposed into real and inflationary components using the Fisher relationship, and the inflation component is treated as an implicit repayment of foreign debt. As a consequence , the size of the current account deficit and capital inflow are reduced by the value of this implicit capital repayment. Il is demonstrated also that the flow of domestic savings is increased by the amount of the implicit capital repayment. Further, the size of these adjustments have increased during the 1980’s , and these increases have probably been more marked in Ausiralia than in many other debtor countries.

The interaction of water molecules with apolar amino acids is an important aspect of the hydrophobic effect and hence of protein folding. Our distributed multiple electrostatic model for water interacting with phenylalanine dipeptides shows that minimum energy sites exist above the aromatic ring such that a solvent molecule can interact with the pi electrons, but only when this site is not blocked by main-chain atoms or disturbed by main-chain polar atoms. This is consistent with the experimental evidence of others that water can hydrogen bond to aromatic pi electrons. In contrast, our analysis of solvent interactions with phenylalanine residues based on 48 high-resolution, well-refined protein structures shows that the dominant interaction of solvent molecules is with the edge of the ring and not with the pi elections. As the faces of phenylalanine rings tend to be buried, and solvent interactions with neighbouring polar atoms are more favourable, the interaction of water molecules with the faces of aromatic pi rings appears not to occur frequently in proteins.

We have analysed the distribution of solvent sites within 5.0 A of the apolar side-chains alanine, valine, leucine, isoleucine and phenylalanine based on experimental data from 24 high-resolution protein structures. Clustering of solvent molecules into specific regions can be seen superimposed on a broad background of sites. The non-random nature of these distributions is confirmed by quantitative analysis of the solvent sites according to a spherical polar (r, theta and phi) co-ordinate system with the apolar atom of interest at the centre. One of the general features of these solvent sites is that they peak at around 4.0 A from an apolar protein carbon atom. Preferences in orientation (theta and phi) are also seen in the solvent distributions especially around the alanine CB atom and the phenylalanine ring. Most (around 75%) of the solvent sites around apolar groups are also within hydrogen bonding distance of protein (main chain) polar groups which leads to a distribution dependent on the local secondary structure. The remaining 25% of solvent sites are referred to as "non-polar" water molecules and their crystallographic temperature factors are higher than average by between 15% to 28%. For alanine and phenylalanine there are enough data to show that water molecules not within hydrogen bonding distance of protein polar atoms also cluster into specific regions. However, the main conclusion appears to be that the hydrophobic hydration in protein crystals is correlated with hydration of polar groups and thus depends on the local environment as well as on the stereochemistry of the apolar atoms.

The coiled coil is a ubiquitous motif that guides many different protein-protein interactions. The accepted hallmark of coiled coils is a seven-residue (heptad) sequence repeat. The positions of this repeat are labelled a-b-c-d-e-f-g, with residues at a and d tending to be hydrophobic. Such sequences form amphipathic α-helices, which assemble into helical bundles via knobs-into-holes interdigitation of residues from neighbouring helices. We wrote an algorithm, SOCKET, to identify this packing in protein structures, and used this to gather a database of coiled-coil structures from the Protein Data Bank. Surprisingly, in addition to commonly accepted structures with a single, contiguous heptad repeat, we identified sequences with multiple, offset heptad repeats. These 'new' sequence patterns help to explain oligomer-state specification in coiled coils. Here we focus on the structural consequences for sequences with two heptad repeats offset by two residues, i.e. a/f′-b/g′-c/a′-d/b′-e/c′-f/d′-g/e′. This sets up two hydrophobic seams on opposite sides of the helix formed. We describe how such helices may combine to bury these hydrophobic surfaces in two different ways and form two distinct structures: open 'α-sheets' and closed 'α-cylinders'. We highlight these with descriptions of natural structures and outline possibilities for protein design.