Search

Oleaginous yeast, such as Lipomyces starkeyi, are logical organisms for production of higher energy density molecules like lipids and terpenes. We demonstrate that transgenic L. starkeyi strains expressing an α-zingiberene synthase gene from lemon basil or Hall's panicgrass can produce up to 17 mg/L α-zingiberene in yeast extract peptone dextrose (YPD) medium containing 4% glucose. The transgenic strain was further examined in 8% glucose media with C/N ratios of 20 or 100, and YPD. YPD medium resulted in 59 mg/L α-zingiberene accumulation. Overexpression of selected genes from the mevalonate pathway achieved 145% improvement in α-zingiberene synthesis. Optimization of the growth medium for α-zingiberene production led to 15% higher titer than YPD medium. The final transgenic strain produced 700 mg/L α-zingiberene in fed-batch bioreactor culture. This study opens a new synthetic route to produce α-zingiberene or other terpenoids in L. starkeyi and establishes this yeast as a platform for jet fuel biosynthesis.

The filamentous fungus Aspergillus terreus has been successfully used for industrial production of itaconic acid (IA) for many years. The IA biosynthesis pathway has recently been characterized at a molecular genetic level as an IA gene cluster by a clone-based transcriptomic approach. The cluster consists of four genes, including genes for cis-aconitic acid decarboxylase (cadA), a predicted transcription factor (tf), a mitochondrial organic acid transporter (mttA) and an MFS (major facilitator superfamily) type transporter (mfsA). In this research, we performed expressed sequence tag (EST) analysis and systematic gene deletions to further investigate the role of those genes during IA biosynthesis in A. pseudoterreus ATCC32359. EST analysis showed a similar expression pattern among those four genes that were distinct from neighboring genes and further confirmed that they belong to the same biosynthesis cluster. Systematic gene deletion analysis demonstrated that tf, cadA, mttA and mfsA genes in the cluster are essential for IA production; deletion of any of them will either completely abolish the IA production or dramatically decrease the amount of IA produced. The tf gene plays a regulatory role in this cluster. Deletion of tf led to decreased expression levels of cadA, mttA and mfsA. More importantly, a significant amount of aconitic acid was detected in the cadA deletion strain but not in the other deletion strains. Therefore, by deleting only one gene, the cadA, we established a novel microbial host for the production of aconitic acid and other value-added chemicals from sugars in lignocellulosic biomass.

17 p.-7 fig., Because they comprise some of the most efficient wood-decayers, Polyporales fungi impact carbon cycling in forest environment. Despite continuous discoveries on the enzymatic machinery involved in wood decomposition, the vision on their evolutionary adaptation to wood decay and genome diversity remains incomplete., We combined the genome sequence information from 50 Polyporales species, including 26 newly sequenced genomes and sought for genomic and functional adaptations to wood decay through the analysis of genome composition and transcriptome responses to different carbon sources.The genomes of Polyporales from different phylogenetic clades showed poor conservation in macrosynteny, indicative of genome rearrangements. We observed different gene family expansion/contraction histories for plant cell wall degrading enzymes in core polyporoids and phlebioids and captured expansions for genes involved in signaling and regulation in the lineages of white rotters. Furthermore, we identified conserved cupredoxins, thaumatin-like proteins and Lytic Polysaccharide Monooxygenases with a yet uncharacterized appended module as new candidate players in wood decomposition.Given the current need for enzymatic toolkits dedicated to the transformation of renewable carbon sources, the observed genomic diversity among Polyporales strengthens the relevance of mining Polyporales biodiversity to understand the molecular mechanisms of wood decay., This work was supported by the U.S. Department of Energy Joint Genome Institute, a Department of Energy Office of Science User Facility (grant # DE-AC02-05CH11231, DESC0019427 to I.V.G. and B.M.); Institut Carnot 3BCAR, the French National Research Institute for Agriculture, Food and Environment, The Region Provence Alpes Côte d’Azur and the Groupement de Recherche Génomique Environnementale to H.H.; the Laboratory of Excellence ARBRE (grant # ANR-11-LABX-0002-01 to F.M.); the Region Lorraine and the European Regional Development Fund to F.M.; the Hungarian Academy of Sciences’ Momentum Program (grant # LP2019-13/2019 to L.G.N.); the Spanish Ministry of Economy, Industry and Competitiveness (grant # BIO2017-86559-R to A.T.M.); the Consejo Superior de Investigaciones Científicas (grant # PIE-201620E081 to A.T.M.); the Agencia Estatal de Investigación, the European Regional Development Fund and the Ministry of Science, Innovation and Universities (grant # RTI2018-093683-B-I00 to L.D.E. and M.J.M.) and the Czech Science Foundation (grant# 17-20110S to P.B. and M.Š.).

Biological engineering of microorganisms to produce value-added chemicals is a promising route to sustainable manufacturing. However, overproduction of metabolic intermediates at high titer, rate, and yield from inexpensive substrates is challenging in non-model systems where limited information is available regarding metabolic flux and its control in production conditions. Integrated multi-omic analyses of engineered strains offers an in-depth look at metabolites and proteins directly involved in growth and production of target and non-target bioproducts. Here we applied multi-omic analyses to overproduction of the polymer precursor 3-hydroxypropionic acid (3HP) in the filamentous fungus Aspergillus pseudoterreus. A synthetic pathway consisting of aspartate decarboxylase, beta-alanine pyruvate transaminase, and 3HP dehydrogenase was designed and built for A. pseudoterreus. Strains with single- and multi-copy integration events were isolated and multi-omics analysis consisting of intracellular and extracellular metabolomics and targeted and global proteomics was used to interrogate the strains in shake-flask and bioreactor conditions. Production of a variety of co-products (organic acids and glycerol) and oxidative degradation of 3HP were identified as metabolic pathways competing with 3HP production. Intracellular accumulation of nitrogen as 2,4-diaminobutanoate was identified as an off-target nitrogen sink that may also limit flux through the engineered 3HP pathway. Elimination of the high-expression oxidative 3HP degradation pathway by deletion of a putative malonate semialdehyde dehydrogenase improved the yield of 3HP by 3.4 × after 10 days in shake-flask culture. This is the first report of 3HP production in a filamentous fungus amenable to industrial scale biomanufacturing of organic acids at high titer and low pH.

Background In an effort to ensure future energy security, reduce greenhouse gas emissions and create domestic jobs, the US has invested in technologies to develop sustainable biofuels and bioproducts from renewable carbon sources such as lignocellulosic biomass. Bio-derived jet fuel is of particular interest as aviation is less amenable to electrification compared to other modes of transportation and synthetic biology provides the ability to tailor fuel properties to enhance performance. Specific energy and energy density are important properties in determining the attractiveness of potential bio-derived jet fuels. For example, increased energy content can give the industry options such as longer range, higher load or reduced takeoff weight. Energy-dense sesquiterpenes have been identified as potential next-generation jet fuels that can be renewably produced from lignocellulosic biomass. Results We developed a biomass deconstruction and conversion process that enabled the production of two tricyclic sesquiterpenes, epi-isozizaene and prespatane, from the woody biomass poplar using the versatile basidiomycete Rhodosporidium toruloides. We demonstrated terpene production at both bench and bioreactor scales, with prespatane titers reaching 1173.6 mg/L when grown in poplar hydrolysate in a 2 L bioreactor. Additionally, we examined the theoretical fuel properties of prespatane and epi-isozizaene in their hydrogenated states as blending options for jet fuel, and compared them to aviation fuel, Jet A. Conclusion Our findings indicate that prespatane and epi-isozizaene in their hydrogenated states would be attractive blending options in Jet A or other lower density renewable jet fuels as they would improve viscosity and increase their energy density. Saturated epi-isozizaene and saturated prespatane have energy densities that are 16.6 and 18.8% higher than Jet A, respectively. These results highlight the potential of R. toruloides as a production host for the sustainable and scalable production of bio-derived jet fuel blends, and this is the first report of prespatane as an alternative jet fuel.

Dothideomycetes is the largest class of kingdom Fungi and comprises an incredible diversity of lifestyles, many of which have evolved multiple times. Plant pathogens represent a major ecological niche of the class Dothideomycetes and they are known to infect most major food crops and feedstocks for biomass and biofuel production. Studying the ecology and evolution of Dothideomycetes has significant implications for our fundamental understanding of fungal evolution, their adaptation to stress and host specificity, and practical implications with regard to the effects of climate change and on the food, feed, and livestock elements of the agro-economy. In this study, we present the first large-scale, whole-genome comparison of 101 Dothideomycetes introducing 55 newly sequenced species. The availability of whole-genome data produced a high-confidence phylogeny leading to reclassification of 25 organisms, provided a clearer picture of the relationships among the various families, and indicated that pathogenicity evolved multiple times within this class. We also identified gene family expansions and contractions across the Dothideomycetes phylogeny linked to ecological niches providing insights into genome evolution and adaptation across this group. Using machine-learning methods we classified fungi into lifestyle classes with >95 % accuracy and identified a small number of gene families that positively correlated with these distinctions. This can become a valuable tool for genome-based prediction of species lifestyle, especially for rarely seen and poorly studied species. This manuscript has been authored by an author at Lawrence Berkeley National Laboratory under Contract No. DE-AC02-05CH11231 with the U.S. Department of Energy. R. A. and I. V. G. were supported by the NSF grants DEB-1354625 and IOS-1456958. Sequencing of Dothideomycetes genomes were conducted as part of the 1000 Fungal Genomes Project supported by the JGI Community Sequencing Project #662.

Oleaginous yeast can produce high yields of lipids from hydrolyzed lignocellulosic carbohydrates, but the difficulty and cost of extracting the lipids from the bioreactor broth, as well as the lack of profitable options for valorizing feedstock lignin are major barriers to cost-competitive production of renewable diesel from corn stover via bioconversion. Hydrothermal liquefaction of lignocellulosic biomass effectively breaks down and converts lignin into biocrude oil products, but provides relatively low yields of biocrude from feedstock carbohydrates. In the present study, bioconversion and hydrothermal liquefaction were integrated in a new hybrid approach that combines the advantages of both processes to produce a high quality distillate fuel blendstock. Eight bioreactor cultures of the oleaginous yeast Lipomyces starkeyi were grown in pretreated corn stover hydrolysate or simulated hydrolysate media, with dry cell mass yields from sugar of up to 0.43 g/g, and yields of intracellular triglyceride lipids from sugar (measured as fatty acid methyl esters) of up to 0.26 g/g. The lipid-rich cell mass in the bioreactor broth was pooled and mixed with pretreated corn stover lignin to produce a slurry intermediate with a total mass of 23.5 kg. The slurry was fed to a continuous hydrothermal liquefaction reactor at a dry solids loading of 16.3% to produce biocrude oil with a carbon yield of 55% and a mass yield of 40% from the feedstock. The biocrude was then hydrotreated to produce a renewable hydrocarbon fuel blendstock, with the majority of the product boiling in the distillate range. Techno-economic analysis suggested that a biorefinery employing this integrated, hybrid conversion approach could produce approximately twice as much distillate fuel blendstock than contemporary biorefinery designs that rely solely on lipids solvent-extracted from oleaginous yeast for production of distillate blendstocks from corn stover hydrolysate. Sensitivity analysis of the proposed biorefinery design suggested that the cost of production could be reduced to $3/gasoline gallon equivalent or less by addressing identified research gaps, such as optimizing the separation of biocrude to recover additional hydrocarbon from the aqueous phase of the reactor effluent. Our results provide a proof-of-concept for a new hybrid biorefinery design that could enhance domestic production of renewable diesel, jet, and marine fuel from corn stover or other forms of lignocellulosic biomass.

The development of Pseudomonas strains for industrial production of fuels and chemicals will require the integration of heterologous genes and pathways into the chromosome. Finding the most appropriate integration site to maximize strain performance is an essential part of the strain design process. We characterized seven chromosomal loci in Pseudomonas putida KT2440 for integration of a fluorescent protein expression construct. Insertion in five of the loci did not affect growth rate, but fluorescence varied by up to 27-fold. Three sites displaying a diversity of phenotypes with the fluorescent reporter were also chosen for the integration of a gene encoding a muconate importer. Depending on the integration locus, expression of the importer varied by approximately 3-fold and produced significant phenotypic differences. This work demonstrates the impact of the integration location on host viability, gene expression, and overall strain performance., Highlights • Pseudomonas putida KT2440 chromosomal loci were characterized as potential insertion targets for heterologous genes. • Integration location had a significant effect on heterologous protein expression and host phenotype. • The identification of an appropriate chromosomal insertion location is essential to optimize genetic engineering design.

The objective of this study was to disrupt the non-homologous end-joining (NHEJ) pathway gene (Lsku70Δ) and evaluate the effects of selected gene deletions related to glycogen synthesis (LsGSY1) and lipid degradation (LsMFE1, LsPEX10, and LsTGL4) on lipid production in the oleaginous yeast Lipomyces starkeyi. Disruption of the NHEJ pathway to reduce the rate of non-homologous recombination is a common approach used to overcome low-efficiency targeted deletion or insertion in various organisms. Here, the homologue of the LsKU70 gene was identified and disrupted in L. starkeyi NRRL Y-11558. The LsGSY1, LsMFE1, LsPEX10, LsTGL4, and LsURA3 genes were then replaced with a resistance marker in the Lsku70Δ strain and several site-specific insertions were assessed for targeted over-expression of selected genes. The targeted disruption efficiency of five selected genes (LsGSY1, LsMFE1, LsPEX10, LsTGL4, and LsURA3) was increased from 0 to 10% in the parent to 50-100% of transformants screened in the Lsku70Δ strain with 0.8-1.4 kb homologous flanking sequences, while the efficiency of site-specific gene insertion with the β-glucuronidase reporter gene was 100% in the locus near the 3'-end coding (LsKU70) and non-coding (LsGSY1, LsMFE1, and LsPEX10) regions. Disruption of LsKU70 in isolation and in conjunction with LsGSY1, LsMFE1, LsPEX10, or LsTGL4 did not affect lipid production in L. starkeyi. Furthermore, β-glucuronidase reporter gene activity was similar in strains containing site-specific targeted insertions. Therefore, over-expression of genes related to lipid synthesis at targeted loci can be further examined for improvement of total lipid production in L. starkeyi.

Plant biomass, once reduced to its composite sugars, can be converted to fuel substitutes. One means of overcoming the recalcitrance of lignocellulose is pretreatment followed by enzymatic hydrolysis. However, currently available commercial enzyme cocktails are inhibited in the presence of residual pretreatment chemicals. Recent studies have identified a number of cellulolytic enzymes from bacteria that are tolerant to pretreatment chemicals such as ionic liquids. The challenge now is generation of these enzymes in copious amounts, an arena where fungal organisms such as Aspergillus niger have proven efficient. Fungal host strains still need to be engineered to increase production titers of heterologous protein over native enzymes, which has been a difficult task. Here, we developed a forward genetics screen coupled with whole-genome resequencing to identify specific lesions responsible for a protein hyper-production phenotype in A. niger. This strategy successfully identified novel targets, including a low-affinity glucose transporter, MstC, whose deletion significantly improved secretion of recombinant proteins driven by a glucoamylase promoter. Electronic supplementary material The online version of this article (10.1007/s00253-017-8717-3) contains supplementary material, which is available to authorized users.

Section Flavi encompasses both harmful and beneficial Aspergillus species, such as Aspergillus oryzae, used in food fermentation and enzyme production, and Aspergillus flavus, food spoiler and mycotoxin producer. Here, we sequence 19 genomes spanning section Flavi and compare 31 fungal genomes including 23 Flavi species. We reassess their phylogenetic relationships and show that the closest relative of A. oryzae is not A. flavus, but A. minisclerotigenes or A. aflatoxiformans and identify high genome diversity, especially in sub-telomeric regions. We predict abundant CAZymes (598 per species) and prolific secondary metabolite gene clusters (73 per species) in section Flavi. However, the observed phenotypes (growth characteristics, polysaccharide degradation) do not necessarily correlate with inferences made from the predicted CAZyme content. Our work, including genomic analyses, phenotypic assays, and identification of secondary metabolites, highlights the genetic and metabolic diversity within section Flavi., Aspergillus fungi classified within the section Flavi include harmful and beneficial species. Here, Kjærbølling et al. analyse the genomes of 23 Flavi species, showing high genetic diversity and potential for synthesis of over 13,700 CAZymes and 1600 secondary metabolites.

Background Rhodosporidium toruloides has emerged as a promising host for the production of bioproducts from lignocellulose, in part due to its ability to grow on lignocellulosic feedstocks, tolerate growth inhibitors, and co-utilize sugars and lignin-derived monomers. Ent-kaurene derivatives have a diverse range of potential applications from therapeutics to novel resin-based materials. Results The Design, Build, Test, and Learn (DBTL) approach was employed to engineer production of the non-native diterpene ent-kaurene in R. toruloides. Following expression of kaurene synthase (KS) in R. toruloides in the first DBTL cycle, a key limitation appeared to be the availability of the diterpene precursor, geranylgeranyl diphosphate (GGPP). Further DBTL cycles were carried out to select an optimal GGPP synthase and to balance its expression with KS, requiring two of the strongest promoters in R. toruloides, ANT (adenine nucleotide translocase) and TEF1 (translational elongation factor 1) to drive expression of the KS from Gibberella fujikuroi and a mutant version of an FPP synthase from Gallus gallus that produces GGPP. Scale-up of cultivation in a 2 L bioreactor using a corn stover hydrolysate resulted in an ent-kaurene titer of 1.4 g/L. Conclusion This study builds upon previous work demonstrating the potential of R. toruloides as a robust and versatile host for the production of both mono- and sesquiterpenes, and is the first demonstration of the production of a non-native diterpene in this organism.

A desire to move away from fossil fuels toward more sustainable, renewable, or carbon-neutral sources has motivated the search for alternative feedstocks. Lignocellulosic biomass is an attractive option due to its abundance, low cost, and high sugar content. In nature, the breakdown of lignocellulosic biomass is a sequential process involving the collective contribution of numerous microorganisms and enzymes. In biorefineries, however, the high cost and limited availability of the enzyme cocktails required for efficient biomass deconstruction are significant barriers to the adoption of lignocellulosic biomass as a feedstock to produce biofuels and other value-added products. Filamentous fungi have an astounding capacity to secrete digestive enzymes into their extracellular environment through the presence of efficient systems for the transcription, translation, folding, posttranslational modification, and secretion of polypeptides. These features have led filamentous fungi to be exploited for the manufacturing of homologous and heterologous proteins for the chemical, pharmaceutical, and biofuel industries. Total homologous (native) enzyme expression can reach about 10–100 g/L, but heterologous enzyme production is hampered by much lower concentration. Efficient heterologous protein production often requires multilevel optimization strategies for both the protein and the expression host as factors limiting production are often protein-specific and bottlenecks can exist at any stage from transcription and translation to folding and secretion. Here, we review the molecular and genetic strategies used for the particularly challenging case of heterologous enzyme production in filamentous fungi, with an emphasis on the enzymes involved in the conversion of lignocellulosic biomass. The development of efficient expression systems and hosts to identify, characterize, and enhance the expression levels, yields, and activities of heterologous lignocellulosic enzymes is critical to the successful adoption of lignocellulosic biomass into the new bio-economy.

An oleaginous yeast Rhodosporidium toruloides is a promising host for converting lignocellulosic biomass to bioproducts and biofuels. In this work, we performed multi-omics analysis of lignocellulosic carbon utilization in R. toruloides and reconstructed the genome-scale metabolic network of R. toruloides. High-quality metabolic network models for model organisms and orthologous protein mapping were used to build a draft metabolic network reconstruction. The reconstruction was manually curated to build a metabolic model using functional annotation and multi-omics data including transcriptomics, proteomics, metabolomics, and RB-TDNA sequencing. The multi-omics data and metabolic model were used to investigate R. toruloides metabolism including lipid accumulation and lignocellulosic carbon utilization. The developed metabolic model was validated against high-throughput growth phenotyping and gene fitness data, and further refined to resolve the inconsistencies between prediction and data. We believe that this is the most complete and accurate metabolic network model available for R. toruloides to date.

Fungi are well known for secreting high levels of proteins. A number of strategies have been used to characterize and maximize protein secretion for industrial purposes. In this review, we highlight three different ascomycetes and focus on a specific protein production example for each. Aspergillus niger has been utilized as a production host for amylases and multiple molecular genetic approaches have been applied to increase secretion in this organism. Saccharification of plant biomass is an integral part of biofuel production and classical genetic and genomic approaches have been used in Trichoderma reesei to understand and manipulate the pathways controlling secretion of plant cell wall degrading enzymes. Finally, Neurospora crassa, a model filamentous ascomycete has been exploited to understand a wide range of biological processes including protein secretion.

Microbial biofuel and bioproduct platforms provide access to clean and renewable carbon sources that are more sustainable and environmentally friendly than petroleum-based carbon sources. Furthermore, they can serve as useful conduits for the synthesis of advanced molecules that are difficult to produce through strictly chemical means. R. toruloides has emerged as a promising potential host for converting renewable lignocellulosic material into valuable fuels and chemicals. However, engineering efforts to improve the yeast’s production capabilities have been impeded by a lack of advanced tools for genome engineering. While this is rapidly changing, one key tool remains unexplored in R. toruloides: CRISPR-Cas9. The results outlined here demonstrate for the first time how effective multiplexed CRISPR-Cas9 gene disruption provides a framework for other researchers to utilize this revolutionary genome-editing tool effectively in R. toruloides., Microbial production of biofuels and bioproducts offers a sustainable and economic alternative to petroleum-based fuels and chemicals. The basidiomycete yeast Rhodosporidium toruloides is a promising platform organism for generating bioproducts due to its ability to consume a broad spectrum of carbon sources (including those derived from lignocellulosic biomass) and to naturally accumulate high levels of lipids and carotenoids, two biosynthetic pathways that can be leveraged to produce a wide range of bioproducts. While R. toruloides has great potential, it has a more limited set of tools for genetic engineering relative to more advanced yeast platform organisms such as Yarrowia lipolytica and Saccharomyces cerevisiae. Significant advancements in the past few years have bolstered R. toruloides’ engineering capacity. Here we expand this capacity by demonstrating the first use of CRISPR-Cas9-based gene disruption in R. toruloides. Transforming a Cas9 expression cassette harboring nourseothricin resistance and selecting transformants on this antibiotic resulted in strains of R. toruloides exhibiting successful targeted disruption of the native URA3 gene. While editing efficiencies were initially low (0.002%), optimization of the cassette increased efficiencies 364-fold (to 0.6%). Applying these optimized design conditions enabled disruption of another native gene involved in carotenoid biosynthesis, CAR2, with much greater success; editing efficiencies of CAR2 deletion reached roughly 50%. Finally, we demonstrated efficient multiplexed genome editing by disrupting both CAR2 and URA3 in a single transformation. Together, our results provide a framework for applying CRISPR-Cas9 to R. toruloides that will facilitate rapid and high-throughput genome engineering in this industrially relevant organism. IMPORTANCE Microbial biofuel and bioproduct platforms provide access to clean and renewable carbon sources that are more sustainable and environmentally friendly than petroleum-based carbon sources. Furthermore, they can serve as useful conduits for the synthesis of advanced molecules that are difficult to produce through strictly chemical means. R. toruloides has emerged as a promising potential host for converting renewable lignocellulosic material into valuable fuels and chemicals. However, engineering efforts to improve the yeast’s production capabilities have been impeded by a lack of advanced tools for genome engineering. While this is rapidly changing, one key tool remains unexplored in R. toruloides: CRISPR-Cas9. The results outlined here demonstrate for the first time how effective multiplexed CRISPR-Cas9 gene disruption provides a framework for other researchers to utilize this revolutionary genome-editing tool effectively in R. toruloides.

Aspergillus niger and other filamentous fungi are widely used in industry, but efficient genetic engineering of these hosts remains nascent. For example, while molecular genetic tools have been developed, including CRISPR/Cas9, facile genome engineering of A. niger remains challenging. To address these challenges, we have developed a simple Cas9-based gene targeting method that provides selectable, iterative, and ultimately marker-free generation of genomic deletions and insertions. This method leverages locus-specific "pop-out" recombination to suppress off-target integrations. We demonstrated the effectiveness of this method by targeting the phenotypic marker albA and validated it by targeting the glaA and mstC loci. After two selection steps, we observed 100% gene editing efficiency across all three loci. This method greatly reduces the effort required to engineer the A. niger genome and overcomes low Cas9 transformations efficiency by eliminating the need for extensive screening. This method represents a significant addition to the A. niger genome engineering toolbox and could be adapted for use in other organisms. It is expected that this method will impact several areas of industrial biotechnology, such as the development of new strains for the secretion of heterologous enzymes and the discovery and optimization of metabolic pathways.

© 2018, This is a U.S. government work and not under copyright protection in the U.S.; foreign copyright protection may apply. Aspergillus section Nigri comprises filamentous fungi relevant to biomedicine, bioenergy, health, and biotechnology. To learn more about what genetically sets these species apart, as well as about potential applications in biotechnology and biomedicine, we sequenced 23 genomes de novo, forming a full genome compendium for the section (26 species), as well as 6 Aspergillus niger isolates. This allowed us to quantify both inter- and intraspecies genomic variation. We further predicted 17,903 carbohydrate-active enzymes and 2,717 secondary metabolite gene clusters, which we condensed into 455 distinct families corresponding to compound classes, 49% of which are only found in single species. We performed metabolomics and genetic engineering to correlate genotypes to phenotypes, as demonstrated for the metabolite aurasperone, and by heterologous transfer of citrate production to Aspergillus nidulans. Experimental and computational analyses showed that both secondary metabolism and regulation are key factors that are significant in the delineation of Aspergillus species.

The author's family name were incorrectly published in the original version. This has been corrected to read as.

Cellulases and other enzymes are needed for saccharification of plant biomass in the biorefinery industry. Expression, characterization, and eventual large-scale production of known and novel cellulases requires the ability to express and secrete heterologous enzymes in relevant protein production platforms like Aspergillus niger. A method for cloning and expression of genes for these desirable enzymes in A. niger is presented in this Chapter.

The draft genome sequence of Aspergillus oryzae ATCC 12892 is presented here. A. oryzae produces 3-nitropropionic acid, which has been investigated with regard to understanding the biosynthesis of nitroorganic compounds.

The genus of Aspergillus holds fungi relevant to plant and human pathology, food biotechnology, enzyme production, model organisms, and a selection of extremophiles. Here we present six whole-genome sequences that represent unexplored branches of the Aspergillus genus. The comparison of these genomes with previous genomes, coupled with extensive chemical analysis, has allowed us to identify genes for toxins, antibiotics, and anticancer compounds, as well as show that Aspergillus novofumigatus is potentially as pathogenic as Aspergillus fumigatus, and has an even more diverse set of secreted bioactive compounds. The findings are of interest to industrial biotechnology and basic research, as well as medical and clinical research.

The author's family name were incorrectly published in the original version. This has been corrected to read as: Given Name: Saori Family Name: Amaike Campen

Cellulases and other enzymes are needed for saccharification of plant biomass in the biorefinery industry. Expression, characterization, and eventual large-scale production of known and novel cellulases requires the ability to express and secrete heterologous enzymes in relevant protein production platforms like Aspergillus niger. A method for cloning and expression of genes for these desirable enzymes in A. niger is presented in this Chapter.

The halotolerant alga Dunaliella salina is a model for stress tolerance and is used commercially for production of beta-carotene (=pro-vitamin A). The presented draft genome of the genuine strain CCAP19/18 will allow investigations into metabolic processes involved in regulation of stress responses, including carotenogenesis and adaptations to life in high-salinity environments.

BackgroundEconomical conversion of lignocellulosic biomass into biofuels and bioproducts is central to the establishment of a robust bioeconomy. This requires a conversion host that is able to both efficiently assimilate the major lignocellulose-derived carbon sources and divert their metabolites toward specific bioproducts.ResultsIn this study, the carotenogenic yeast Rhodosporidium toruloides was examined for its ability to convert lignocellulose into two non-native sesquiterpenes with biofuel (bisabolene) and pharmaceutical (amorphadiene) applications. We found that R. toruloides can efficiently convert a mixture of glucose and xylose from hydrolyzed lignocellulose into these bioproducts, and unlike many conventional production hosts, its growth and productivity were enhanced in lignocellulosic hydrolysates relative to purified substrates. This organism was demonstrated to have superior growth in corn stover hydrolysates prepared by two different pretreatment methods, one using a novel biocompatible ionic liquid (IL) choline α-ketoglutarate, which produced 261 mg/L of bisabolene at bench-scale, and the other using an alkaline pretreatment, which produced 680 mg/L of bisabolene in a high gravity fed-batch bioreactor. Interestingly, R. toruloides was also observed to assimilate p-coumaric acid liberated from acylated grass lignin in the IL hydrolysate, a finding we verified with purified substrates. R. toruloides was also able to consume several additional compounds with aromatic motifs similar to lignin monomers, suggesting that this organism may have the metabolic potential to convert depolymerized lignin streams alongside lignocellulosic sugars.ConclusionsThis study highlights the natural compatibility of R. toruloides with bioprocess conditions relevant to lignocellulosic biorefineries and demonstrates its ability to produce non-native terpenes.