Search

Abstract The effects of heat-assisted vat photopolymerization (HVPP) on the physical and mechanical properties of 3D-printed dental resins, including the morphometric stability of 3D-printed crowns, were investigated. A resin tank was designed to maintain the resin at 30, 40, and 50 ℃ during the 3D printing process. Test specimens were fabricated using a commercial dental resin, with untreated resin serving as the control group. Key properties such as viscosity, curing kinetics, surface microhardness, flexural properties, and dimensional accuracy were evaluated. The viscosity of the resin decreased significantly (P

Abstract Three-dimensional (3D) printing, otherwise known as additive manufacturing in a non-technical context, is becoming increasingly popular in the field of dentistry. As an essential step in the 3D printing process, postwashing with organic solvents can damage the printed resin polymer and possibly pose a risk to human health. The development of water-washable dental resins means that water can be used as a washing agent. However, the effects of washing agents and washing times on the mechanical and biocompatibility properties of water-washable resins remain unclear. This study investigated the impact of different washing agents (water, detergent, and alcohol) and washing time points (5, 10, 20, and 30 min) on the flexural strength, Vickers hardness, surface characterization, degree of conversion, biocompatibility, and monomer elution of 3D printed samples. Using water for long-term washing better preserved the mechanical properties, caused a smooth surface, and improved the degree of conversion, with 20 min of washing with water achieving the same biological performance as organic solvents. Water is an applicable agent option for washing the 3D printing water-washable temporary crown and bridge resin in the postwashing process. This advancement facilitates the development of other water-washable intraoral resins and the optimization of clinical standard washing guidelines.

Background/Objectives: Ultraviolet (UV) radiation is a primary factor in skin photoaging, leading to wrinkles, reduced elasticity, and pigmentation changes due to damage to cellular DNA, proteins, and lipids. Glycoproteins from sesame cake (SPE) have potential protective effects against UV-induced skin aging. This study investigated the anti-photoaging effects of SPE on UV-induced damage in human keratinocyte HaCaT cells and SKH-1 hairless mice. Methods: SPE was evaluated for its ability to mitigate UV-induced damage in HaCaT cells by assessing MMP-1 protein and mRNA expression levels, as well as the activity of transcription factors AP-1 and NF-κB. The phosphorylation of AKT and MAPK pathways was also analyzed. In vivo, SKH-1 hairless mice were exposed to UV radiation, and the effects of SPE on wrinkle formation and skin structure were assessed by measuring wrinkle length, area, and volume. Results: SPE significantly inhibited UV-induced MMP-1 protein and mRNA expression in HaCaT cells, indicating suppression of AP-1 and NF-κB transcription factors involved in MMP-1 production. Additionally, SPE reduced UV-induced phosphorylation of AKT and MAPK pathways. In SKH-1 hairless mice, SPE treatment led to significant reductions in wrinkle length, area, and volume, preserving skin structure in UV-exposed mice. Conclusions: The findings demonstrate that SPE has protective effects against UV-induced photoaging by inhibiting key molecular pathways associated with skin aging. SPE shows promise as a natural anti-photoaging agent, providing a foundation for future skincare product development. Further studies are warranted to explore the molecular mechanisms in detail and to validate these effects through clinical trials.

Abstract This study investigated two artificial intelligence (AI) methods for automatically classifying dental implant diameter and length based on periapical radiographs. The first method, deep learning (DL), involved utilizing the pre-trained VGG16 model and adjusting the fine-tuning degree to analyze image data obtained from periapical radiographs. The second method, clustering analysis, was accomplished by analyzing the implant-specific feature vector derived from three key points coordinates of the dental implant using the k-means++ algorithm and adjusting the weight of the feature vector. DL and clustering model classified dental implant size into nine groups. The performance metrics of AI models were accuracy, sensitivity, specificity, F1-score, positive predictive value, negative predictive value, and area under the receiver operating characteristic curve (AUC-ROC). The final DL model yielded performances above 0.994, 0.950, 0.994, 0.974, 0.952, 0.994, and 0.975, respectively, and the final clustering model yielded performances above 0.983, 0.900, 0.988, 0.923, 0.909, 0.988, and 0.947, respectively. When comparing the AI model before tuning and the final AI model, statistically significant performance improvements were observed in six out of nine groups for DL models and four out of nine groups for clustering models based on AUC-ROC. Two AI models showed reliable classification performances. For clinical applications, AI models require validation on various multicenter data.

Abstract Aims To evaluate screw loosening and fracture load and angular deviation of a single implant-supported prosthesis under multi-directional loading condition at three different occlusal contact points. Methods A total of 40 metal crowns were cemented to external connection implants and were embedded vertically and obliquely. The occlusal surface of the crown was designed with three flat surfaces, contact a, b, and c, representing outer and inner 20-degree inclination for buccal and lingual cusps. The angular deviations of implant crown under static 50N of loading were measured. And screw removal torque was evaluated before and after 57,600 load cycles. Then, fracture load was measured for each specimen. Data analysis was performed using one-way analysis of variance test of significance followed by Tukey honest significant difference (HSD) test(p

Abstract Health outcomes of the elderly vary between rural and urban areas. Sarcopenia is diagnosed as loss of muscle strength or impaired physical performance, namely “low muscle function” and low muscle mass. Outcomes of low muscle mass and low muscle function are not equal. This study aimed to investigate the prevalence of low muscle mass, low muscle function, and sarcopenia in rural and urban populations and to determine whether regional differences were associated with each of these components. Participants aged ≥ 69 years (n = 2354) were recruited from three urban districts and one rural district in Korea. Low muscle mass was defined by appendicular lean mass using bioelectrical impedance analysis. Low muscle function was defined by handgrip strength and 5-chair stand test. Sarcopenia was defined as low muscle mass plus low muscle function. The prevalence of low muscle function (53.7% vs. 72.8%), and sarcopenia (16.3% vs. 24.4%) were higher in the rural elderly population. Rural residence was associated with low muscle function (OR 1.63; 95% CI 1.13–2.37, P = 0.009), but not with low muscle mass (OR 0.58; 95% CI 0.22–1.54, P = 0.271) or with sarcopenia (OR 1.13; 95% CI 0.63–2.00, P = 0.683). Interventions to detect and improve low muscle function in rural elderly population are needed.

Background: Short-term hydroponic-cultured ginseng (sHCG), which is 1-year-old ginseng seedlings cultivated for 4 weeks in a hydroponic system, is a functional food item with several biological effects. However, the optimal extraction conditions for sHCG, and the bioactivity of its extracts, have not been evaluated. Methods: Chlorogenic acid (CGA) and ginsenoside contents were evaluated in sHCG, white ginseng (WG), and red ginseng (RG) using high-performance liquid chromatography. Response surface methodology (RSM) was used to optimize the extraction conditions (temperature and ethanol concentration) to maximize the yield of dry matter, CGA, and four ginsenosides (Re, Rg1, Rb1, and Rd) from sHCG. The optimal extraction conditions were applied to pilot-scale production of sHCG extracts. The expression levels of tumor necrosis factor (TNF)-α/interferon (IFN)-γ-induced thymic and activation-regulated chemokines (TARC/CCL17) were measured after treatment with sHCG, WG, and RG extracts, and the effects of their bioactive compounds (CGA and four ginsenosides) on human skin keratinocytes (HaCaTs) were evaluated. Results: CGA and four ginsenosides, which are bioactive compounds of sHCG, significantly inhibited TNF-α/IFN-γ-induced TARC/CCL17 expression. The optimal sHCG extraction conditions predicted by the RSM models were 80 °C and 60% ethanol (v/v). The sHCG extracts produced at the pilot scale under optimal conditions greatly alleviated TNF-α/IFN-γ-induced TARC/CCL17 production compared with WG and RG extracts. Conclusions: Pesticide-free sHCG extracts, which contain high levels of CGA and the ginsenosides Re, Rg1, Rb1, and Rd as bioactive compounds, may have therapeutic potential for atopic diseases.

Environmental pollutants such as fine dust are increasingly linked to premature skin aging. In this study, we investigated the protective effects of higenamine, a natural plant alkaloid, against fine-dust-induced skin aging in human keratinocytes (HaCaT cells). We found that higenamine significantly attenuated fine-dust-induced expression of matrix metalloproteinase-1 (MMP-1), a key enzyme involved in collagen degradation. Furthermore, higenamine was found to modulate fine-dust-induced AP-1 and NF-κB transactivation, which are crucial factors for MMP-1 transcription. Higenamine also impeded fine-dust-induced phosphorylation in specific pathways related to AP-1 and NF-κB activation, and effectively alleviated reactive oxygen species (ROS) production, a key factor in oxidative stress caused by fine dust exposure. These results suggest that higenamine exerts protective effects against fine-dust-induced skin aging, primarily through its MMP-1 inhibitory properties and ability to mitigate ROS-induced oxidative damage. Our data highlight the potential of higenamine as an effective ingredient in skincare products designed to combat environmental skin damage.

We examined whether recombinant human bone morphogenetic protein-2 (rhBMP-2) when applied to collagen membranes, would reinforce them during guided bone regeneration. Four critical cranial bone defects were created and treated in 30 New Zealand white rabbits, including a control group, critical defect only; group 1, collagen membrane only; group 2, biphasic calcium phosphate (BCP) only; group 3, collagen membrane + BCP; group 4, collagen membrane with rhBMP-2 (1.0 mg/mL); group 5, collagen membrane with rhBMP-2 (0.5 mg/mL); group 6, collagen membrane with rhBMP-2 (1.0 mg/mL) + BCP; and group 7, collagen membrane with rhBMP-2 (0.5 mg/mL) + BCP. After a 2-, 4-, or 8-week healing period, the animals were sacrificed. The combination of collagen membranes with rhBMP-2 and BCP yielded significantly higher bone formation rates compared to the other groups (control group and groups 1–5 < groups 6 and 7; p < 0.05). A 2-week healing period yielded significantly lower bone formation than that at 4 and 8 weeks (2 < 4 = 8 weeks; p < 0.05). This study proposes a novel GBR concept in which rhBMP-2 is applied to collagen membranes outside instead of inside the grafted area, thereby inducing quantitatively and qualitatively enhanced bone regeneration in critical bone defects.

The root of Smilax china L. is used in traditional Korean medicine. We found that the Smilax china L. root extract has strong antimicrobial activity against two Cutibacterium acnes strains (KCTC 3314 and KCTC 3320). The aim of this study was to identify the beneficial properties of Smilax china L. extracts for their potential use as active ingredients in cosmetics for the treatment of human skin acne. The high-performance liquid chromatography (HPLC) and liquid chromatography-hybrid quadrupole time-of-flight mass spectrometry (LC/QTOF/MS) methods were used to obtain the profile of secondary metabolites from the ethyl acetate-soluble fraction of the crude extract. Agar diffusion and resazurin-based broth microdilution assays were used to evaluate antimicrobial activity and minimum inhibitory concentrations (MIC), respectively. Among the 24 metabolites, quercetin, resveratrol, and oxyresveratrol were the most potent compounds against Cutibacterium acnes. Minimum inhibitory concentrations of quercetin, resveratrol, and oxyresveratrol were 31.25, 125, and 250 μg/mL, respectively.

Solar ultraviolet (sUV) radiation remains a major cause of skin aging. Nelumbo nucifera (lotus) is a well-known edible plant widely grown in Asia, including Korea, China, and Japan. The lotus consists of flowers, leaves, stems, and seeds, and all parts reportedly possess nutritional and medical values. Traditionally, lotus flowers, leaves, stems, and seeds have been used as antidiarrheal agents, diuretics, antipyretics, and antimicrobial and antihyperlipidemic agents. In addition, the Nelumbo nucifera lotus embryo has been shown to possess sedative and antipyretic properties and can relieve hemostatic thirst and treat eye diseases. Recently, Nelumbo nucifera lotus flower extract has been widely used in cosmetics due to its ability to reduce wrinkles and its whitening effects. Numerous cosmetics using Nelumbo nucifera lotus embryo extracts are commercially available. However, the active components of Nelumbo nucifera remain elusive. Lotusine is a phytochemical and soluble alkaloid found in lotus embryos. Herein, we examined the anti-wrinkle effect of lotusine using sUV-exposed human keratinocytes. We observed that lotusine reduced sUV-induced matrix metalloproteinase (MMP)-1 expression and modulated transcriptional activities of activator protein (AP)-1 and nuclear factor kappa B (NF-κB). sUV-induced AP-1 and NF-κB activity could be activated via multiple signal transduction cascades, including the p38 MAPK, JNK, ERK1/2, and Akt pathways in the skin. Lotusine inhibited the MEK1/2-ERK1/2-p90RSK, MKK3/6-p38, and Akt-p70S6K pathways. Overall, our findings suggest that lotusine has potential benefits related to MMP-1 expression and skin aging following sUV exposure. Hence, the lotus can be developed as a valuable functional food and cosmetic material.

Background: Lower-limb varicose veins (VVs) are common and known to have a higher prevalence among people who work in occupations requiring prolonged standing. In the Republic of Korea, however, VV-related occupational factors have seldom been examined. This study was conducted to assess the prevalence of VVs among nurses, an occupational group considered to be at high risk of VVs, and determine the occupational risk factors of prolonged standing. Methods: Between March and August 2014, a questionnaire survey coupled with Doppler ultrasonography was conducted on the nurses working at a university hospital. Results: A total of 414 nurses participated in the survey and diagnostic testing. From the survey analysis and test results, the prevalence of VVs in nurses was estimated to be 16.18%. Significant factors for venous reflux were age [odds ratio (OR) = 1.06, 95% confidence interval (CI) = 1.03–1.10], pregnancy (OR = 2.15, 95% CI = 1.17–3.94), and delivery (OR = 2.02, 95% CI = 1.08–3.78). The statistical significance of these factors was verified after risk adjustment for sociodemographic factors (OR = 3.40, 95% CI = 1.27–9.09). Conclusion: Factors significantly associated with venous reflux were increasing age and prolonged working hours (≥ 4 hours) in a standing position (OR = 2.80, 95% CI = 1.08–7.25), even after risk adjustment for sociodemographic factors. This study is significant in that an objective diagnosis of VVs preceded the analysis of the risk factors for VV incidence, thus verifying objectively that VVs are associated with occupations requiring prolonged hours of working in a standing position. Keywords: nurse, occupational risk factor, prevalence, varicose vein

This study attempted to determine the dimensional stability of maxillary and mandibular edentulous denture bases constructed using three-dimensional (3D) printing systems based on stereolithography and digital light processing according to the postcuring treatment time and the removal time of the support structure. Three-dimensional printing of the designed denture base file was performed using two types of 3D printing photocurable resin (standard gray resin (Formlabs) (Somerville, MA, USA) and MAZIC D resin (Vericom) (Anyang, Korea)) and their compatible 3D printers (Form3 (Formlabs) and Phrozen Shuffle (Phrozen) (Hsinchu City, Taiwan)). Different postcuring times (no postcuring, and 15, 30, 45, and 60 min) and times of removal of the support structure were set for each group. Data relating to the denture bases in all groups were obtained using 3D scanning with a tabletop scanner after postcuring. All acquired data were exported to 3D analysis software, and the dimensional changes during postcuring of the denture base were analyzed using RMSE (root-mean-square error) values. It could be confirmed that the dimensional changes increased with postcuring time, and the accuracy was higher in the maxilla than in the mandible. The accuracy was highest for the group in which the postcuring process was performed while the support structure was present.

Abstract Background ‘Work related musculoskeletal disorders (WRMSDs)’ have been mostly reported in the manufacturing industry but recently the occurrence of industrial injuries has been constantly increasing in the service industry. This research is going to analyze the data about workers’ compensation for WRMSDs in five different service sectors and identify characteristics of occupations with the highest approved occupations. Methods According to the data released from the Korea Worker’s Compensation & Welfare Service, the overview of 12,730 cases of workers’ compensation for WRMSDs in five service sectors from 2004 to 2013 is going to be analyzed and the source data is going to be classified by the Korean Standard Classification of Occupations to select the top five occupations that have the highest number of approval. Results After selecting each five occupations from the service sector that have work related musculoskeletal disorders, the result showed that the occupation with the highest number of approval in the health and social care sector were the early childhood educators, cooks in the school canteens in education services sector, garbage collectors in the sanitation and similar services sector, deliverymen in wholesale and retail, consumer goods repair and building cleaners in general management businesses such as those in building maintenance. The major event observed in the top five occupations was the overexertion and reaction as a cause of WRMSDs. The day when the WRMSDs mostly occurred was on Monday and the most likely time was 10 am. The median days away from work and lost working days are 29–90 days and 0–50 days respectively. The difference in each occupation was observed in year of service, age, and gender. Conclusions 83.21% of the approved cases of workers’ compensation for WRMSDs occurred in the top 25 occupations in all of the five service sectors, which meant that the approval of workers’ compensation is concentrated in specific occupations. This research is going to suggest preventive measures for work related musculoskeletal disorders in the service industry and to help prioritize the preventive measures. Trial registration Not applicable.

Clinicians and researchers have used various methods to reproduce the maxillomandibular relationship and mandibular movement of individual patients using an articulator, with efforts being made to reduce errors associated with the conventional technique. When a change to a vertical dimension is required during the conventional prosthesis construction process, the maxillary and mandibular casts are mounted on the mechanical articulator using a facebow and bite registration and the elevation of the anterior guide pin of the articulator is used. However, this can inevitably cause errors due to differences between the articulator hinge movement and the actual trajectory of the patient. There has recently been increasing interest in tracking the trajectory of jaw motion of a patient, and this paper presents a new technique for altering the vertical dimension based on the measured trajectory. Target materials for performing tracking are attached to the maxillary and mandibular anterior teeth to record opening and closing movements of the patient’s mouth in real time and align the patient’s scanned intraoral data or cast data. The movements of the targets are replaced with the movement of the patient’s oral scan data. Additionally, then the occlusal vertical dimension is set to a new position based on the obtained trajectory. After determining the optimal vertical dimension with consideration of the space required for restoration, maxillary and mandibular STL files are exported and the designed cast is created using a 3D printer. The printed cast is mounted on an articulator for subsequent procedures. This approach maintains the patient’s actual maxillomandibular relationship at various vertical heights and can also reduce the chair time required when adjusting for errors.

Cherry blossom (Prunus yedoensis) petals are used as ingredients in many cosmetics. However, despite their use in numerous products, the exact function of cherry blossom petals in cosmetics is unclear. Therefore, we need evidence-based studies to support the labeling claims that are made in cherry blossom products in the cosmetics industry. We investigated the skin anti-aging potential of non-enzymatic softening cherry blossom extract (NES-CBE) in this study. The extract desalinated, to improve its quality such that it can be used as a functional material for the skin. The anti-wrinkle effect of NES-CBE was investigated on human keratinocytes (HaCaT cells) under solar UV (sUV) light exposure. We found that NES-CBE reduced the sUV-induced matrix metalloproteinase (MMP)-1 expression and modulated the transactivation of the activator protein (AP)-1. Furthermore, NES-CBE suppressed the phosphorylation of MEK1/2 and ERK proteins, indicating its regulation of sUV-induced MAPK signaling. Additionally, we observed NES-CBE reduced MMP-1 protein expression in a human skin equivalent model. Taken together, these results suggest that NES-CBE reduces sUV-induced MMP-1 protein expression through reducing AP-1 transactivation via regulation of the MEK1/2-ERK pathway.

Improvements in computer-aided design/computer-aided manufacturing technologies have led to multiple attempts being made to simplify and improve the workflow of prosthesis fabrication for completely edentulous patients. However, most attempts still involve the conventional methods of impression-making and recording the maxillomandibular relationships using alginate, rubber impression materials, and wax materials. In the case of a completely edentulous arch, the presence of movable tissues and the absence of stable landmarks make it difficult to perform direct digitization using an intraoral scanner and to digitally determine the vertical dimension. In the alternative technique described herein, data are obtained by scanning a template such as the patient’s existing old dentures and jaw movement data using target materials and an optical scanner, and an appropriate maxillomandibular relationship that has the desired restorative space is determined on the basis of the obtained trajectory of mandibular movements while opening and closing the mouth. After designing dentures on the basis of the newly established maxillomandibular relationships and performing a try-in process, the final dentures can be manufactured. This alternative technique can reduce the need for multiple visits and complex procedures, improving the workflow for fabricating prostheses with the correct maxillomandibular relationships for individual patients.

This study investigated the trueness of a digital implant impression according to the orientation of the implant scan body (ISB) and the scanning method. With the flat surface of the ISB facing either the buccal or proximal direction, the ISB was scanned using one tabletop scanner (T500) and three types of intraoral scanner (TRIOS 3, CS3600, and i500). The effects of differences in the scanning method and ISB orientation were assessed. Postalignment data were subsequently obtained with the abutments generated using a digital library, and superimposed with reference data using a best-fit algorithm, followed by root-mean-square error (RMSE) analysis. The RMSE was lower in the buccal groups (28.15 ± 8.87 μm, mean ± SD) than in the proximal groups (31.94 ± 8.95 μm, p = 0.031), and lower in the full-scan groups (27.92 ± 10.80 μm) than in the partial-scan groups (32.16 ± 6.35 μm, p = 0.016). When using the tabletop scanner, the trueness was higher when the ISB was connected buccally (14.34 ± 0.89 μm) than when it was connected proximally (29.35 ± 1.15 μm, p < 0.001). From the findings of this study it can be concluded that the operator should connect the ISB so that its flat surface faces the buccal direction, and attempt to scan all areas. Additionally, it is advantageous to connect an ISB buccally when using a tabletop scanner.

Reproduction of the exact interocclusal relationship using digital workflow is crucial for precise fabrication of accurate prostheses. Intraoral scanner is known to be valid for the measurement of quadrants, however, the role of missing area in the quadrant scan on the virtual interocclusal record (VIR) is uncertain. This study aimed to evaluate the accuracy of VIR in quadrant scans using an intraoral scanner (IOS) under four different edentulous conditions. Eight scans per group were obtained using a laboratory scanner and three IOSs (Trios3, CS3600, i500). Based on trueness and precision, Trios3 had the best results, followed by CS3600 and i500. The trueness and precision were affected by edentulous conditions. The three IOSs showed deviation in the posterior region during assessment of VIR for the missing area with posterior support. CS3600 and i500 showed deviation in the short-span edentulous area without support. In extended edentulous condition without support, Trios3 showed overclosure, while i500 showed an angular deviation. In some groups scanned with Trios3 and i500, the tilting effect was observed. Based on the edentulous condition and type of IOS used, local or general deviations in occlusion were seen. The accuracy of VIR was dependent on accurate scan data. Thus, registration of the occlusal relationship in an edentulous area with more than two missing teeth using IOSs may be clinically more inaccurate than that with a laboratory scanner.

Accuracy of implant position reproduction according to various types of scanners, implant placement depths, and tooth positions are unknown. The purpose of this study was to compare the accuracy of implant position reproduction for differences in the exposed length of the implant scan body according to scanner type and tooth position. Implants were placed at the positions of the lateral incisor, first premolar, and first molar in the study model at the bone level and submerged 1.5 mm, 3.0 mm, 4.5 mm, and 6.0 mm. The completed models were scanned with one type of tabletop scanner and three types of intraoral scanners (TRIOS 3, i500, and CS3600). A matching process was performed for all scan data to superimpose abutment library data on the scan body, and the root mean square errors were analyzed in three dimensions to evaluate the position reproducibility of the replaced abutment library. In the trueness analysis, the error increased rapidly for an implant placement depth of 4.5 mm, and was largest for a submersion of 6.0 mm. The precision analysis confirmed that the error increased for depths of at least 3.0 mm. The analysis by position identified that the accuracy was lowest for an implant placed at the position of the lateral incisor. These findings indicate that special care is required when making an impression of a deep implant with an optical scanner.

Yak-Kong is a type of black soybean that is colloquially referred to as the “medicinal bean” and it elicits several beneficial effects that are relevant to human health, including attenuating the formation of skin wrinkles. It has previously been shown that soybean extracts elicit additional bioactivity that is fermented by lactic acid bacteria. In this study of lactic acid bacteria strains that were isolated from the stools of breast-feeding infants (Bifidobacterium animalis subsp. Lactis LDTM 8102 (LDTM 8102) as the lead strain for the fermentation of Yak-Kong. We investigated the effects of LDTM 8102-fermented Yak-Kong on solar-ultraviolet irradiation (sUV)-induced wrinkle formation. In HaCaT cells, the ethanol extract of LDTM 8102-fermented Yak-Kong (EFY) effectively reduced sUV-induced matrix metalloproteinase-1 (MMP-1) secretion. The effect of EFY was superior to that of unfermented (UFY)- and Lactis KCTC 5854 (another Bifidobacterium animalis species)-fermented Yak-Kong. Additionally, EFY reduced sUV-induced MMP-1 mRNA expression and promoter activity, as well as the transactivation of AP-1 and phosphorylation of ERK1/2 and JNK1/2. Furthermore, EFY alleviated sUV-induced MMP-1 secretion, the destruction of the epidermis, and degradation of collagen in a three-dimensional (3D) skin culture model. EFY had a higher total polyphenol content and anti-oxidative activity than UFY. Twelve metabolites were significantly (≥2-fold) increased in Yak-Kong extract after fermentation by LDTM 8102. Among them, the metabolites of major isoflavones, such as 6,7,4′-trihydroxyisoflavone (THIF), exerted the reducing effect of MMP-1, which indicated that the isoflavone metabolites contributed to the effect of EFY on MMP-1 expression as active compounds. These findings suggest that EFY is a potent natural material that can potentially prevent sUV-induced wrinkle formation.

Recently, digital technology has been used in dentistry to enhance accuracy and to reduce operative time. Due to advances in digital technology, the integration of individual mandibular motion into the mapping of the occlusal surface is being attempted. The Patient Specific Motion (PSM) is one such method. However, it is not clear whether the occlusal design that is adjusted using PSM could clinically show reduced occlusal error compared to conventional methods based on static occlusion. In this clinical comparative study including fifteen patients with a single posterior zirconia crown treatment, the occlusal surface after a clinical adjustment was compared to no adjustment (NA; design based on static occlusion), PSM (adjusted using PSM), and adjustment using a semi-adjustable articulator (SA) for the assessment of occlusal error. The root mean square (RMS; μm), average deviation value (±AVG; μm), and proportion inside the tolerance (in Tol; %) were calculated using the entire, subdivided occlusal surface and the out of tolerance area. Using a one-way ANOVA, the RMS and +AVG from the out of tolerance area showed a statistical difference between PSM (202.3 ± 39.8 for RMS, 173.1 ± 31.3 for +AVG) and NA (257.0 ± 73.9 for RMS, 210.9 ± 48.6 for +AVG). For the entire and subdivided occlusal surfaces, there were no significant differences. In the color-coded map analysis, PSM demonstrated a reduced occlusal error compared to NA. In conclusion, adjustment occlusal design using PSM is a simple and effective method for reducing occlusal errors that are difficult to identify in a current computer-aided design (CAD) workflow with static occlusion.

This study aimed to determine the influence of the healing abutment (HA), placed at the implant placement site, on the accuracy of intraoral scanning and buccal bite registration in quadrant maxillary and mandibular models when using three types of intraoral scanner (IOS) and elucidate the distribution of arch distortion. Six experimental groups based on whether the HA was connected and the location of missing teeth were digitized using one laboratory scanner (Identica T500) and three IOSs (Trios 3, CS3600, and i500). Three-way ANOVA was used to analyze the effects of the scanner, location and number of missing teeth, and HA using Tukey investigation analyses for multiple comparisons (α = 0.05). Linear distances between hemispheres from the upper and lower arches were analyzed using the Jonckheere–Terpstra trend test to investigate the tendency of distortion from anterior to posterior tooth positions (α = 0.05). The accuracy of IOSs in groups with HAs was found significantly more accurate than groups without HAs. There was a significant trend in distortion from anterior to posterior tooth positions when using the Trios 3 and i500 IOSs. The scanning accuracy was affected by the presence of an HA, and the distortion along with the arch span may vary with the IOS utilized.

This paper demonstrates a 3D microlithography system where an array of 5 mm Ultra Violet-Light Emitting Diode (UV-LED) acts as a light source. The unit of the light source is a UV-LED, which comes with a length of about 8.9 mm and a diameter of 5 mm. The whole light source comprises 20 × 20 matrix of such 5 mm UV-LEDs giving a total number of 400 LEDs which makes it a very favorable source with a large area for having a batch production of the desired microstructures. This light source is able to give a level of precision in microfabrication which cannot be obtained using commercial 3D printers. The whole light source performs continuous rotational movement once it is turned on. This can also move up and down in a vertical direction. This multidirectional light source also comprises a multidirectional sample holder. The light source teaming up with the multidirectional sample holder highly facilitates the process of fabrication of a huge range of 3D structures. This article also describes the different levels of characterization of the system and demonstrates several fabricated 3D microstructures including high aspect ratio vertical micro towers, twisted turbine structures, triangles, inclined pillar ‘V’ structures, and hollow horn structures as well.

Japanese red pine (Pinus densiflora) is widely present in China, Japan, and Korea. Its green pine leaves have traditionally been used as a food as well as a coloring agent. After being shed, pine leaves change their color from green to brown within two years, and although the brown pine leaves are abundantly available, their value has not been closely assessed. In this study, we investigated the potential anti-photoaging properties of brown pine leaves for skin. Brown pine leaf extract (BPLE) inhibited UVB-induced matrix metalloproteinase-1 (MMP-1) expression to a greater extent than pine leaf extract (PLE) in human keratinocytes and a human skin equivalent model. HPLC analysis revealed that the quantity of trans-communic acid (TCA) and dehydroabietic acid (DAA) significantly increases when the pine leaf color changes from green to brown. BPLE and TCA elicited reductions in UVB-induced MMP-1 mRNA expression and activator protein-1 (AP-1) transactivation by reducing DNA binding activity of phospho-c-Jun, c-fos and Fra-1. BPLE and TCA also inhibited UVB-induced Akt phosphorylation, but not mitogen activated protein kinase (MAPK), known regulators of AP-1 transactivation. We additionally found that BPLE and TCA inhibited phosphoinositide 3-kinase (PI3K), the upstream kinase of Akt, in vitro. In summary, both BPLE and its active component TCA exhibit protective effects against UVB-induced skin aging. Taken together, these findings underline the potential for BPLE and TCA to be utilized as anti-wrinkling agents and cosmetic ingredients, as they suppress UVB-induced MMP-1 expression.

Studies have shown that a major metabolite of the red ginseng ginsenoside Rb1, called 20-O-β-D-glucopyranosyl-20(S)-protopanaxadiol (GPD), exhibits anticancer properties. However, the chemotherapeutic effects and molecular mechanisms behind GPD action in human melanoma have not been previously investigated. Here we report the anticancer activity of GPD and its mechanism of action in melanoma cells. GPD, but not its parent compound Rb1, inhibited melanoma cell proliferation in a dose-dependent manner. Further investigation revealed that GPD treatment achieved this inhibition through the induction of autophagy and apoptosis, while Rb1 failed to show significant effect at the same concentrations. The inhibitory effect of GPD appears to be mediated through the induction of AMPK and the subsequent attenuation of mTOR phosphorylation. In addition, GPD activated c-Jun by inducing JNK phosphorylation. Our findings suggest that GPD suppresses melanoma growth by inducing autophagic cell death and apoptosis via AMPK/JNK pathway activation. GPD therefore has the potential to be developed as a chemotherapeutic agent for the treatment of human melanoma.

Men tend to have more upper body mass and fat than women, a physical characteristic that may predispose them to severe motor vehicle crash (MVC) injuries, particularly in certain body regions. This study examined MVC-related regional body injury and its association with the presence of driver obesity using both real-world data and computer crash simulation.Real-world data were from the 2001 to 2005 National Automotive Sampling System Crashworthiness Data System. A total of 10,941 drivers who were aged 18 years or older involved in frontal collision crashes were eligible for the study. Sex-specific logistic regression models were developed to analyze the associations between MVC injury and the presence of driver obesity. In order to confirm the findings from real-world data, computer models of obese subjects were constructed and crash simulations were performed. According to real-world data, obese men had a substantially higher risk of injury, especially serious injury, to the upper body regions including head, face, thorax, and spine than normal weight men (all p

Purpose: This study aimed to determine the surface glazing effect on the mechanical and biological properties of threedimensional printed dental permanent resins. Methods: Specimens were prepared using Formlabs, Graphy Tera Harz permanent, and NextDent C&B temporary crown resins. Specimens were divided into three groups: samples with untreated surfaces, glazed surfaces, and sand-glazed surfaces. The flexural strength, Vickers hardness, color stability, and surface roughness of the samples were analyzed to identify their mechanical properties. Their cell viability and protein adsorption were analyzed to identify their biological properties. Results: The flexural strength and Vickers hardness of the samples with sand glazed and glazed surfaces were significantly increased. The color change was higher for surface untreated samples than that for the samples with sand-glazed and glazed surfaces. The surface roughness of the samples with sand-glazed and glazed surfaces was low. The samples with sand-glazed and glazed surfaces have low protein adsorption ability and high cell viability. Conclusions: Surface glazing increased the mechanical strength, color stability, and cell compatibility, while reducing the Ra and protein adsorption of 3D-printed dental resins. Thus, a glazed surface exhibited a positive effect on the mechanical and biological properties of 3D-printed resins. [ABSTRACT FROM AUTHOR]

Malignant lymphoma typically presents with homogeneous enhancement of enlarged lymph nodes without internal necrotic or cystic changes on multiphasic CT, which can be suspected without invasive diagnostic methods. However, some subtypes of malignant lymphoma show atypical imaging features, which makes diagnosis challenging for radiologists. Moreover, there are several lymphomamimicking diseases in current clinical practice, including leukemia, viral infections in immunocompromised patients, and primary or metastatic cancer. The ability of diagnostic processes to distinguish malignant lymphoma from mimicking diseases is necessary to establish effective management strategies for initial radiological examinations. Therefore, this study aimed to discuss the typical and atypical imaging features of malignant lymphoma as well as mimicking diseases and discuss important diagnostic clues that can help narrow down the differential diagnosis. [ABSTRACT FROM AUTHOR]