Search

Insertional Achilles tendinopathy can be a debilitating condition that often fails to improve with nonsurgical management such as bracing and physical therapy. Traditional surgical techniques include an open debridement of the diseased tendon and resection of calcaneal spurs. This is followed by repair of the tendon. Suture anchors are often used to secure the tendon, but recent advances in tendon fixation, including the advent of double-row repairs, has allowed better biomechanical repairs and faster rehabilitation. Additionally, minimally invasive surgery and endoscopic techniques have advanced to allow successful treatment of all aspects of the condition while minimizing wound complications and infection. The authors present a technique to treat insertional Achilles tendinopathy and calcaneal bone spurs using minimally invasive surgery techniques while also incorporating a percutaneous double-row suture anchor repair. The technique utilizes 4 portals to access 2 endoscopic working planes. The burr is inserted deep to the tendon and the calcaneoplasty is performed. Subsequently, the endoscope is inserted alongside a shaver to remove bony debris and debulk the anterior aspect of the Achilles areas of tendinopathy. Following this, the portals are used to place a double-row suture anchor repair. Levels of Evidence: Level V more...

Background: Hallux valgus is one of the most common surgically corrected forefoot deformities. Compared to open procedures, minimally invasive (MIS) treatment of hallux valgus has resulted in decreased operative time, reduced complication rates, and greater patient satisfaction. Historically, distal chevron osteotomies are the standard for moderate hallux valgus correction. To our knowledge, no studies have evaluated biomechanical strength of transverse and chevron distal first metatarsal osteotomy (DMO) constructs. The purpose of this study was to evaluate the biomechanical strength of these techniques. Methods: Eighteen cadaveric specimens (9 matched pairs) were randomized to transverse or chevron DMO. Each technique was performed by a separate fellowship-trained orthopedic foot and ankle surgeon. Radiographic images were analyzed. Biomechanical testing was performed using Instron Mechanical System. Ultimate load to failure, yield load, and stiffness were assessed. A 10-N preload was applied to the sesamoid bones for stability. A coaxial compression rate (10 mm/min) was applied until failure was observed. Mean and standard deviations were compared. All cadaveric specimens were male. Results: There was no significant difference in percent metadiaphyseal shift between osteotomies ( P = .453). The most common mode of failure was fracture at screw insertion site (55.6%), followed by failure at osteotomy site (44.4%). A trend toward increased ultimate load to failure ( P = .480), yield load ( P = .054), and stiffness ( P = .438) among transverse compared to chevron osteotomy was observed, but this difference was not statistically significant. Conclusion: Biomechanical testing demonstrated no significant difference in ultimate load, yield load, and stiffness between MIS transverse and chevron osteotomy constructs; a trend toward increased strength in the transverse osteotomy cohort was observed. Chevron osteotomies may result in early failure by relative ease of cutout through cancellous bone compared to transverse osteotomies in which failure requires cortical cutout. Clinical Relevance: Use of MIS techniques for hallux valgus correction is gaining clinical traction. Although various clinical studies have evaluated outcomes of these MIS techniques, biomechanical studies have been minimal. Specifically, the potential biomechanical benefits of various MIS hallux valgus osteotomy techniques have not been delineated to date. The content of this manuscript is quite timely, given the rise in use of these MIS techniques. more...

Repair of the deltoid ligaments is suggested in patients with medial ankle instability after a ligamentous injury or lateral malleolar fracture fixation. Arthroscopy can be a definitive mode of determining whether there is medial instability and, therefore, help to determine whether there is a need to repair the deltoid ligaments. The authors describe a technique for the arthroscopic repair of the deltoid ligaments, using a suture passer and suture anchors. Cadaveric analysis was utilized to establish safe zones and indicate that there is a relatively wide safe zone between the posterior tibialis tendon and the saphenous vein when performing the technique. The authors have performed more than 87 arthroscopic deltoid repairs, with a greater than 90% satisfaction rate among patients. However, future studies with validated outcome measures are needed. Level of Evidence: Level V, expert opinion. more...

In the past several years, arthroscopic repair of the lateral ankle ligaments has grown because it has shown comparable results with the traditional open Brostrom-Gould procedure. In addition, arthroscopic repair allows reduced swelling and cosmesis. This article discusses the authors' technique for lateral ankle instability, with published data supporting biomechanical equivalency to the standard open Brostrom-Gould procedure. An optional internal brace can provide further strength to the repair and lead to a quicker recovery. Arthroscopic repair both with and without the internal brace have shown positive clinical outcomes for patients as well as high satisfaction rates. more...

The Brostrom-Gould operation is considered the gold standard in cases of chronic ankle instability that have failed conservative treatment. There is growing interest in arthroscopic techniques, with studies having shown less surgical morbidity, and faster recovery when compared with open surgery. more...

Chronic anterolateral ankle instability (CLAI) is a frequent pathology which might lead to incapacitating ankle dysfunction and/or pain either in athletes or general population. If neglected, CLAI can lead to late sequelae, such as impingement, cartilage damage, ankle arthritis, or deformities. more...

Anatomical repair of the lateral ligaments of the ankle was first described by Brostrom in 1966. Anatomical reinforcement of this was then described by Gould in 1980. There were good initial results from both author groups. There have however been many modifications of both techniques, again with excellent results. Many of these are long term. more...

Over the last 10 years, significant advances have been made and successful techniques have now been developed that effectively treat ankle instability via the arthroscope.Currently arthroscopic lateral ligament repair techniques can be grouped into "arthroscopic-assisted techniques," "all-arthroscopic techniques," and "all-inside techniques." Recent studies have proven these arthroscopic techniques to be a simple, safe, and biomechanically equivalent, stable alternative to open Brostrom Gould lateral ligament reconstruction. more...

Over the last 50 years, the surgical management of chronic lateral ankle ligament insufficiency has focused on 2 main categories: local soft-tissue reconstruction and tendon grafts/transfer procedures. There is an increasing interest in the arthroscopic solutions for chronic instability of the ankle. Recent biomechanical studies suggest the at least one of the arthroscopic techniques can provide equivalent results to current open local soft-tissue reconstruction (such as the modified Brostrom technique). Arthroscopic lateral ankle ligament reconstruction is becoming an increasingly acceptable method for the surgical management of chronic lateral ankle instability. more...

The modified Brostrom repair is currently the method of choice for the primary operative treatment of chronic lateral ankle instability. Before 2007, the investigators used the traditional open approach with or without the use of suture anchors. This study describes our current technique for arthros more...

This article presents an analysis of a phenomenon that was observed within the dynamic processes of teaching and learning to read and elaborate Cartesian graphs for functions at high-school level. Two questions were considered during this investigation: What types of metaphors does the teacher use to explain the graphic representation of functions at high-school level? Is the teacher aware of the use he/she has made of metaphors in his/her speech, and to what extent does he/she monitor them? The theoretical framework was based on embodied cognition theory. Our findings include teachers’ expressions that suggest, among other ideas: (1) orientation metaphors, such as “the abscissa axis is horizontal”; (2) fictive motion, such as “the graph of a function can be considered as the trace of a point that moves over the graph”; (3) ontological metaphors; and (4) interaction of metaphors. We also show that teachers were not aware of using metaphors. more...

Background: Arthroscopic ankle lateral ligament repair techniques have recently been developed and biomechanically as well as clinically validated. Although there has been 1 anatomic study relating suture and anchor proximity to anatomic structures, none has evaluated the ArthroBroström procedure. Purpose: To evaluate the proximity of anatomic structures for the ArthroBroström lateral ankle ligament stabilization technique and to define ideal landmarks and “safe zones” for this repair. Study Design: Descriptive laboratory study. Methods: Ten human cadaveric ankle specimens (5 matched pairs) were screened for the study. All specimens underwent arthroscopic lateral ligament repair according to the previously described ArthroBroström technique with 2 suture anchors in the fibula. Three cadaveric specimens were used to test the protocol, and 7 were dissected to determine the proximity of anatomic structures. Several distances were measured, including those of different anatomic structures to the suture knots, to determine the “safe zones.” Measurements were obtained by 2 separate observers, and statistical analysis was performed. Results: None of the specimens revealed entrapment by either of the suture knots of the critical anatomic structures, including the superficial peroneal nerve (SPN), sural nerve, peroneus tertius tendon, peroneus brevis tendon, or peroneus longus tendon. The internervous safe zone between the intermediate branch of the SPN and sural nerve was a mean of 51 mm (range, 39-64 mm). The intertendinous safe zone between the peroneus tertius and peroneus brevis was a mean of 43 mm (range, 37-49 mm). On average, a 20-mm (range, 8-36 mm) safe distance was maintained from the most medial suture to the intermediate branch of the SPN. The amount of inferior extensor retinaculum (IER) grasped by either suture knot varied from 0 to 12 mm, with 86% of repairs including the retinaculum. Conclusion: The results indicate that there is a relatively wide internervous and intertendinous safe zone when performing the ArthroBroström technique for lateral ankle stabilization. While none of the critical anatomic structures was entrapped by the suture knots, it was evident that the IER was included in a majority of the repairs. This study further defines the proximity of adjacent anatomic structures and establishes the anatomic safe zones for the ArthroBroström lateral ankle stabilization procedure. Clinical Relevance: By defining this relatively risk-free zone, surgeons who are not as experienced with arthroscopic lateral ligament repair techniques may approach arthroscopic suture passage with more confidence. more...

Background:Secondary surgical repair of ankle ligaments is often indicated in cases of chronic lateral ankle instability. Recently, arthroscopic Broström techniques have been described, but biomechanical information is limited. The purpose of the present study was to analyze the biomechanical properties of an arthroscopic Broström repair and augmented repair with a proximally placed suture anchor. It was hypothesized that the arthroscopic Broström repairs would compare favorably to open techniques and that augmentation would increase the mean repair strength at time zero.Methods:Twenty (10 matched pairs) fresh-frozen foot and ankle cadaveric specimens were obtained. After sectioning of the lateral ankle ligaments, an arthroscopic Broström procedure was performed on each ankle using two 3.0-mm suture anchors with #0 braided polyethylene/polyester multifilament sutures. One specimen from each pair was augmented with a 2.9-mm suture anchor placed 3 cm proximal to the inferior tip of the lateral malleolus. Repairs were isolated and positioned in 20 degrees of inversion and 10 degrees of plantarflexion and loaded to failure using a dynamic tensile testing machine. Maximum load (N), stiffness (N/mm), and displacement at maximum load (mm) were recorded.Results:There were no significant differences between standard arthroscopic repairs and the augmented repairs for mean maximum load and stiffness (154.4 ± 60.3 N, 9.8 ± 2.6 N/mm vs 194.2 ± 157.7 N, 10.5 ± 4.7 N/mm, P = .222, P = .685).Conclusions:Repair augmentation did not confer a significantly higher mean strength or stiffness at time zero.Clinical Relevance:Mean strength and stiffness for the arthroscopic Broström repair compared favorably with previous similarly tested open repair and reconstruction methods, validating the clinical feasibility of an arthroscopic repair. However, augmentation with an additional proximal suture anchor did not significantly strengthen the repair. more...

Surgical strategy regarding chronic lateral ankle instability is undergoing an evolution from traditional open procedures to minimally invasive and arthroscopic techniques. The development of arthroscopic techniques for the ankle mirrors the processes witnessed for the shoulder and knee over the last 30 years. The arthroscopic Brostrom is a novel technique that allows the surgeon to use an arthroscope to perform a lateral ankle ligament reconstruction that was previously thought possible only through open surgical technique. Indications and contraindications for the arthroscopic technique are essentially the same as those for an open Brostrom type of procedure. The arthroscopic Brostrom procedure is easy to remember and relatively simple to perform for the surgeon who has mastered basic ankle arthroscopy. The authors’ results discussed in this article reveal that the arthroscopic Brostrom is a safe and effective procedure with outcomes at least equal to published results for traditional open techniques. Level of Evidence: Level V, expert opinion. more...

The purposes of the current study were: to analyze the relative fatigue endurance of five different first metatarsal shaft osteotomies (proximal crescentic, proximal chevron, Ludloff, Mau, and Scarf), as performed on sawbone models using the most common fixation techniques (part I); and to compare the two more commonly used techniques (per part I results) in matched-pair cadaver specimens (part II).In part I, the proximal chevron and Mau osteotomies were significantly more stable (P >0.005) than all other osteotomies except the Ludloff. In part II, there was no significant difference in fatigue endurance between the proximal chevron and Ludloff osteotomies. more...

Osteotomy of the first metatarsal is a common procedure for correction of hallucal disease. Metatarsals are unique in that they are the only long bones in the human body that support load perpendicular to their longitudinal axis during standing. Thus, osteotomy of the first metatarsal may be complicated by loss of fixation, resulting in nonunion or malunion. The authors review the forces that must be resisted by the osteotomy of the first metatarsal as postoperative weight bearing is initiated, and explore the principles of osteotomy geometry and different fixation techniques to maximize stability of the final construct and to minimize the risk of displacement. more...

Purpose: The authors performed a cadaveric study on 10 ankles and retrospectively reviewed 29 arthroscopic synovectomies to determine the trajectory, minimal safe distances, and complications using a new approach for posterior ankle arthroscopy. Type of Study: Anatomic study and case series. Materials and Methods: A posterolateral portal was established immediately posterior to the peroneal tendon sheath. While staying within the posterior ankle capsule, an inside-out technique was then used to establish the posteromedial portal directly behind the medial malleolus adjacent to the posterior tibial tendon. The cadaveric ankles were frozen, sectioned, and photographed to measure the proximity of neurovascular structures to these coaxial portals. From 1988 to 1994, arthroscopic synovectomy was performed on 23 patients (29 ankles) with hemophilia using these modified portals. Results: Results of the anatomic study showed that the posterior tibial nerve and posterior tibial artery were located a mean distance of 5.7 mm (SEM, 0.6 mm) and 6.4 mm (SEM, 0.7 mm) from the edge of the cannula, respectively. Neither penetration nor contact of nerve or vessel was observed at either posterior portal. In the 29 clinical cases, posterior capsular synovectomy was achieved arthroscopically with no detectable complications at an average 45-month follow-up. Conclusions: Our anatomic data show that the coaxial portals described here are essentially equidistant to the neurovascular structures compared with conventional portals. Our clinical results suggest that his technique for posteromedial and posterolateral portals is safe, effective, and reproducible. Arthroscopy: The Journal of Arthroscopic and Related surgery, Vol 16, No 8 (November-December), 2000: pp 836–842 more...

Objectives: To determine the stiffness and strength characteristics of certain plate-composite femur models designed to simulate unstable subtrochanteric femur fractures (OTA 31-A2.3). Design: Fifteen identical composite femora were osteotomized to produce like models of an unstable subtrochanteric femur fracture. The femora were fixed with either the Synthes 95 degree angled condylar blade plate, a 95 degree dynamic condylar screw plate (DCS ), or a 135 degree dynamic compression hip screw (DHS). Main Outcome Measurements: A materials testing machine was used to apply compression to the femoral head through an adapter plate. Stiffness values were calculated from the load-deformation curves obtained. Results: The DHS-femur model was the stiffest (586 newtons/ millimeter), followed by the 95 degree DCS (404 newtons/millimeter) and the 95 degree condylar blade plate (260 newtons/ millimeter). The DHS also had the highest ultimate load-to-failure (4,877 newtons), followed by the 95 degree DCS (3,107 newtons) and the 95 degree condylar blade plate (2,272 newtons). All of these differences were statistically significant (p < 0.00001). Conclusions: Our findings suggest that the Synthes 95 degree DCS has greater stiffness and strength than the Synthes 95 degree condylar blade plate when tested in this model of an unstable subtrochanteric femur fracture. This model may not be completely appropriate for testing the 135 degree DHS because the hard plastic cortex of the model prevented cut-out of the screw. more...

From 1992 to 1995, 765 patients with a clinical diagnosis of plantar fasciitis were evaluated by one of the authors. Fifty-one patients were diagnosed with plantar fascia rupture, and 44 of these ruptures were associated with corticosteroid injection. The authors injected 122 of the 765 patients, resulting in 12 of the 44 plantar fascia ruptures. Subjective and objective evaluations were conducted through chart and radiographic review. Thirty-nine of these patients were evaluated at an average 27-month follow-up. Thirty patients (68%) reported a sudden onset of tearing at the heel, and 14 (32%) had a gradual onset of symptoms. In most cases the original heel pain was relieved by rupture. However, these patients subsequently developed new problems including longitudinal arch strain, lateral and dorsal midfoot strain, lateral plantar nerve dysfunction, stress fracture, hammertoe deformity, swelling, and/or antalgia. All patients exhibited diminished tension of the plantar fascia upon examination by the stretch test. Comparison of calcaneal pitch angles in the affected and uninvolved foot showed a statistically significant difference of 3.7° ( P = 0.0001). Treatment included NSAIDs, rest or cross-training, stretching, orthotics, and boot-brace immobilization. At an average 27-month follow-up, 50% had good/excellent scores and 50% had fair/poor scores. Recovery time was varied. Ten feet were asymptomatic by 6 months post rupture, four feet by 12 months post rupture, and 26 feet remained symptomatic 1 year post rupture. Our findings demonstrate that plantar fascia rupture after corticosteroid injection may result in long-term sequelae that are difficult to resolve. more...

Operative treatment of mechanical ankle instability is indicated for patients with multiple sprains and continued episodes of instability. Open repair of the lateral ankle ligaments involves exposure of the attenuated ligaments and advancement back to their anatomic insertions on the fibula using bone tunnels or suture implants.Open and arthroscopic fixation are equal in strength to failure for anatomic Broström repair.Controlled laboratory study.Seven matched pairs of human cadaveric ankle specimens were randomized into 2 groups of anatomic Broström repair: open or arthroscopic. The calcaneofibular ligament and anterior talofibular ligament were excised from their origin on the fibula. In the open repair group, 2 suture anchors were used to reattach the ligaments to their anatomic origins. In the arthroscopic repair group, identical suture anchors were used for repair via an arthroscopic technique. The ligaments were cyclically loaded 20 times and then tested to failure. Torque to failure, degrees to failure, initial stiffness, and working stiffness were measured. A matched-pair analysis was performed. Power analysis of 0.8 demonstrated that 7 pairs needed to show a difference of 30%, with a 15% standard error at a significance level of α = .05.There was no difference in the degrees to failure, torque to failure, or stiffness for the repaired ligament complex. Nine of 14 specimens failed at the suture anchor.There is no statistical difference in strength or stiffness of a traditional open repair as compared with an arthroscopic anatomic repair of the lateral ligaments of the ankle.An arthroscopic technique can be considered for lateral ligament stabilization in patients with mild to moderate mechanical instability. more...

Background: The current study examined the outcomes of operative treatment of unstable ankle fractures in patients at least 80 years old at the time of injury. Methods: Of 2,682 patients who presented for treatment of ankle fractures, 17 patients met the study criteria. These patients had open reduction and internal fixation after sustaining 15 closed and two open unstable ankle fractures. There were 11 type B fractures and six type C fractures by the Danis-Weber classification, and 12 supination-external rotation and five pronation-external rotation fractures by the Laugen-Hansen classification systems. Results: When noncompliant patients who developed complications were removed from analysis, the fixation failure and deep infection rates were 0% each. Conclusions: These results highlight the importance of patient compliance and nonweight-bearing status in the treatment of ankle fractures in patients over 80 years. more...

Background: Achieving stable fixation when performing tibiotalocalcaneal arthrodesis can be challenging, especially in osteopenic bone. The purpose of the current investigation was to compare the stiffness and fatigue endurance of blade-plate-and-screw fixation with intramedullary rod fixation in a cadaveric model. Methods: In ten matched pairs of fresh-frozen cadaveric legs, a tibiotalocalcaneal arthrodesis was performed with use of a blade-plate and a 6.5-mm sagittal screw in one leg and with use of an intramedullary rod in the contralateral leg. After an initial load-deformation curve was obtained, each specimen was loaded to 270 N through 250,000 cycles at a rate of 3 Hz. Results: Blade-plate-and-screw fixation resulted in significantly higher mean initial and final stiffness and decreased plastic deformation than did intramedullary rod fixation. In addition, there was an inverse correlation between bone-mineral density and the difference in plastic deformation noted between the specimens of each pair. Conclusions: Blade-plate fixation is biomechanically superior to intramedullary fixation for tibiotalocalcaneal arthrodesis. Clinical Relevance: Although good fixation can be achieved with an intramedullary rod or a blade-plate-and-screw construct, the stability of the blade-plate-and-screw construct may have advantages, particularly in osteopenic bone. more...