Search

The market for polycarbonate (PC), a versatile material, is growing rapidly. Despite its widespread use in many applications, poor chemical resistance and roughness have hindered its adoption as a substrate in solar cell technologies. Here, the first‐ever perovskite solar cell (PSC) is demonstrated on PC films. A solution‐processed planarizing layer is developed using a commercial ambient‐curable refractory resin through blade coating which decreased film roughness from 1.46 µm to 23 nm, lowered water vapor transmission rates (WVTR) by a half, and significantly improved solvent resistance enabling deposition of precursor inks. The PSCs are fabricated on the planarized PC substrate, with a customized ITO electrode with an average visible transparency of 78%, sheet resistance of 25 Ω/sq, and a safe bending radius of 20 mm. The power conversion efficiency (PCE) reached 13.0%. The unencapsulated PSCs retained 80% of initial PCE after 1776 h upon ISOS‐D‐1 shelf‐life tests. These results open new pathways for integrating solar cells in many products made from PC materials, such as ID cards, smart cards, windows, skylights, buildings, and product packaging, as well as introducing a new solution for planarization and solvent barrier that can be used for other types of optoelectronic devices (LEDs, transistors, etc.) and substrates. [ABSTRACT FROM AUTHOR]

This article discusses the issue of aggressive behavior in individuals with severe mental illnesses (SMIs) and explores the factors that contribute to this behavior. The authors present a case series of four individuals with different mental illnesses and analyze the personal, familial, social, and cultural factors that influence their aggression. They propose a "Person-in-Situation framework" that takes into account these various factors and suggests personalized multidimensional interventions to address aggressive behavior in individuals with SMI. The article emphasizes the importance of understanding the context and underlying causes of aggression in order to develop effective strategies for intervention and prevention. [Extracted from the article]

T he association of bruxism with selective serotonin reuptake inhibitors/serotonin norepinephrine reuptake inhibitors (SSRI/SNRI) has been noted for a long time.1, 2 Here we report a case of venlafaxine-induced sleep bruxism and its successful management with very low dose aripiprazole. Later, venlafaxine dose was decreased to 225 mg/d, and aripiprazole was stopped after a week of decreasing the venlafaxine dose. The current report also suggests that venlafaxine-induced bruxism is dose-dependent and that, if clinically advisable, dose reduction may be used as a measure to relieve bruxism. [Extracted from the article]

Experimental studies on gain and saturation of a Yb-doped double-cladding fiber amplifier accompanied with and interpreted by rigorous numerical simulations are presented. The saturation power, the value, and the spectral asymmetry of the output signal are experimentally characterized in both pulsed and continuous wave (CW) operation, and then, verified and interpreted numerically. Power conversion efficiency and quantum conversion efficiency of the amplifier are measured to be up to 55% and 58%, respectively. It is the first time, to the best of our knowledge, to demonstrate a numerical model for the pulsed operation based on the interaction of vector coupled nonlinear Schrodinger equations and the rate equations of the Yb-doped double-clad fiber taking into account all high-order dispersion parameters and the variation of gain coefficient during pulse propagation. A good agreement between numerical and experimental results is observed providing interpretations to the results. The numerical models and the experimental demonstrations provide guidance for the design and analysis of Yb-doped double-cladding fiber amplifiers both in pulsed and CW operation. [ABSTRACT FROM AUTHOR]

Experimental studies on gain and saturation of a Yb-doped double-cladding fiber amplifier accompanied with and interpreted by rigorous numerical simulations are presented. The saturation power, the value, and the spectral asymmetry of the output signal are experimentally characterized in both pulsed and continuous wave (CW) operation and then, verified and interpreted numerically. Power conversion efficiency and quantum conversion efficiency of the amplifier are measured to be up to 55% and 58%, respectively. It is the first time, to the best of our knowledge, to demonstrate a numerical model for the pulsed operation based on the interaction of vector coupled nonlinear Schrodinger equations and the rate equations of the Yb-doped double-clad fiber taking into account all high-order dispersion parameters and the variation of gain coefficient during pulse propagation. A good agreement between numerical and experimental results is observed providing interpretations to the results. The numerical models and the experimental demonstrations provide guidance for the design and analysis of Yb-doped double-cladding fiber amplifiers both in pulsed and CW operation. [ABSTRACT FROM AUTHOR]