Search

Point mutations in cardiac myosin, the heart's molecular motor, produce distinct clinical phenotypes: hypertrophic (HCM) and dilated (DCM) cardiomyopathy. Do mutations alter myosin's molecular mechanics in a manner that is predictive of the clinical outcome? We have directly characterized the maximal force-generating capacity (Fmax) of two HCM (R403Q, R453C) and two DCM (S532P, F764L) mutant myosins isolated from homozygous mouse models using a novel load-clamped laser trap assay. Fmaxwas 50% (R403Q) and 80% (R453C) greater for the HCM mutants compared with the wild type, whereas Fmaxwas severely depressed for one of the DCM mutants (65% S532P). Although Fmaxwas normal for the F764L DCM mutant, its actin-activated ATPase activity and actin filament velocity ( Vactin) in a motility assay were significantly reduced (Schmitt JP, Debold EP, Ahmad F, Armstrong A, Frederico A, Conner DA, Mende U, Lohse MJ, Warshaw D, Seidman CE, Seidman JG. Proc Natl Acad Sci USA 103: 14525–14530, 2006.). These Fmaxdata combined with previous Vactinmeasurements suggest that HCM and DCM result from alterations to one or more of myosin's fundamental mechanical properties, with HCM-causing mutations leading to enhanced but DCM-causing mutations leading to depressed function. These mutation-specific changes in mechanical properties must initiate distinct signaling cascades that ultimately lead to the disparate phenotypic responses observed in HCM and DCM.

Each of the heads of the motor protein myosin II is capable of supporting motion. A previous report showed that double-headed myosin generates twice the displacement of single-headed myosin (Tyska, M.J., D.E. Dupuis, W.H. Guilford, J.B. Patlak, G.S. Waller, K.M. Trybus, D.M. Warshaw, and S. Lowey. 1999. Proc. Natl. Acad. Sci. USA. 96:4402–4407). To determine the role of the second head, we expressed a smooth muscle heterodimeric heavy meromyosin (HMM) with one wild-type head, and the other locked in a weak actin-binding state by introducing a point mutation in switch II (E470A). Homodimeric E470A HMM did not support in vitro motility, and only slowly hydrolyzed MgATP. Optical trap measurements revealed that the heterodimer generated unitary displacements of 10.4 nm, strikingly similar to wild-type HMM (10.2 nm) and approximately twice that of single-headed subfragment-1 (4.4 nm). These data show that a double-headed molecule can achieve a working stroke of ∼10 nm with only one active head and an inactive weak-binding partner. We propose that the second head optimizes the orientation and/or stabilizes the structure of the motion-generating head, thereby resulting in maximum displacement.

Several classes of the myosin superfamily are distinguished by their "double-headed" structure, where each head is a molecular motor capable of hydrolyzing ATP and interacting with actin to generate force and motion. The functional significance of this dimeric structure, however, has eluded investigators since its discovery in the late 1960s. Using an optical-trap transducer, we have measured the unitary displacement and force produced by double-headed and single-headed smooth- and skeletal-muscle myosins. Single-headed myosin produces approximately half the displacement and force (approximately 6 nm; 0.7 pN) of double-headed myosin (approximately 10 nm; 1.4 pN) during a unitary interaction with actin. These data suggest that muscle myosins require both heads to generate maximal force and motion.

Opening the Shaker K channel should be easy. Release the membrane potential that normally holds it closed, and massive stored molecular energies snap it rapidly and inexorably into its open configuration. Unlocking the inner secrets of this voltage-dependent channel's gating mechanism has proven to be much more difficult. An article by Ledwell and Aldrich in this issue has opened that door significantly.

Skeletal muscle's ability to shorten and lengthen against a load is a fundamental property, presumably reflecting the inherent load-dependence of the myosin molecular motor. Here we report the velocity of a single actin filament translocated by a mini-ensemble of skeletal myosin approximately 8 heads under constant loads up to 15 pN in a laser trap assay. Actin filament velocity decreased with increasing load hyberbolically, with unloaded velocity and stall force differing by a factor of 2 with [ATP] (30 vs. 100 muM). Analysis of actin filament movement revealed that forward motion was punctuated with rapid backward 60-nm slips, with the slip frequency increasing with resistive load. At stall force, myosin-generated forward movement was balanced by backward slips, whereas at loads greater than stall, myosin could no longer sustain forward motion, resulting in negative velocities as in eccentric contractions of whole muscle. Thus, the force-velocity relationship of muscle reflects both the inherent load-dependence of the actomyosin interaction and the balance between forward and reverse motion observed at the molecular level.

Entry of Ca through voltage-dependent Ca channels is an important regulator of the function of smooth muscle, cardiac muscle, and neurons. Although Ca channels have been extensively studied since the first descriptions of Ca action potentials (P. Fatt and B. Katz. J. Physiol. Lond. 120: 171-204, 1953), the permeation rate of Ca through single Ca channels has not been measured directly under physiological conditions. Instead, single Ca channels have typically been examined using high concentrations (80-110 mM) of another divalent charge carrier, Ba, so as to maximize the amplitude of the single-channel currents. Calculations of unitary currents at 2 mM Ca indicated that the single-channel currents would be immeasurably small (i.e., < 0.1 pA). We provide here the first direct measurements of single Ca channel currents at a physiological Ca concentration. Contrary to earlier estimates, we have found that currents through single Ca channels in arterial smooth muscle are 0.1-0.3 pA at 2 mM Ca and physiological membrane potentials. These relatively large unitary currents permit direct measurement of Ca channel properties under conditions that do not distort their function. Our data also indicate that Ca permeates these channels at relatively high rates in physiological Ca concentrations and membrane potentials.

Resistance arteries exist in a maintained contracted state from which they can dilate or constrict depending on need. In many cases, these arteries constrict to membrane depolarization and dilate to membrane hyperpolarization and Ca-channel blockers. We discuss recent information on the regulation of arterial smooth muscle voltage-dependent Ca channels by membrane potential and vasoconstrictors and on the regulation of membrane potential and K channels by vasodilators. We show that voltage-dependent Ca channels in the steady state can be open and very sensitive to membrane potential changes in a range that occurs in resistance arteries with tone. Many synthetic and endogenous vasodilators act, at least in part, through membrane hyperpolarization caused by opening K channels. We discuss evidence that these vasodilators act on a common target, the ATP-sensitive K (KATP) channel that is inhibited by sulfonylurea drugs. We propose the following hypotheses that presently explain these findings: 1) arterial smooth muscle tone is regulated by membrane potential primarily through the voltage dependence of Ca channels; 2) many vasoconstrictors act, in part, by opening voltage-dependent Ca channels through membrane depolarization and activation by second messengers; and 3) many vasodilators work, in part, through membrane hyperpolarization caused by KATP channel activation.

The ATP hydrolysis rate and shortening velocity of muscle are load-dependent. At the molecular level, myosin generates force and motion by coupling ATP hydrolysis to lever arm rotation. When a laser trap was used to apply load to single heads of expressed smooth muscle myosin (S1), the ADP release kinetics accelerated with an assistive load and slowed with a resistive load; however, ATP binding was mostly unaffected. To investigate how load is communicated within the motor, a glycine located at the putative fulcrum of the lever arm was mutated to valine (G709V). In the absence of load, stopped-flow and laser trap studies showed that the mutation significantly slowed the rates of ADP release and ATP binding, accounting for the approximately 270-fold decrease in actin sliding velocity. The load dependence of the mutant's ADP release rate was the same as that of wild-type S1 (WT) despite the slower rate. In contrast, load accelerated ATP binding by approximately 20-fold, irrespective of loading direction. Imparting mechanical energy to the mutant motor partially reversed the slowed ATP binding by overcoming the elevated activation energy barrier. These results imply that conformational changes near the conserved G709 are critical for the transmission of mechanochemical information between myosin's active site and lever arm.

The linkages between a protein's primary sequence, three-dimensional structure, and the detailed manifestations of its function are well appreciated. Exploring and understanding these linkages have proven remarkably complex, however. While some functions may be localized exclusively to one protein region, others may be distributed or even diffusely coded in the structure. The kinetics of the tetrodotoxin-sensitive Na + channel and its voltage-gated siblings provide many examples of such complex and distributed coupling. The channel consists of four domains, each a repeat of the fundamental unit that is the primary motif of the voltage-dependent K + channel. In each domain, six membrane-spanning regions (S1-$6) give the channel its essential form, with charged groups embedded within these regions, presumably imparting the channel's

Real synaptic systems consist of a nonuniform population of synapses with a broad spectrum of probability and response distributions varying between synapses, and broad amplitude distributions of postsynaptic unitary responses within a given synapse. A common approach to such systems has been to assume identical synapses and recover apparent quantal parameters by deconvolution procedures from measured evoked (ePSC) and unitary evoked postsynaptic current (uePSC) distributions. Here we explicitly consider nonuniform synaptic systems with both intra (type I) and intersynaptic (type II) response variability and formally define an equivalent system of uniform synapses in which both uePSC and ePSC amplitude distributions best approximate those of the actual nonuniform synaptic system. This equivalent system has the advantage of being fully defined by just four quantal parameters: ñ, the number of equivalent synapses; p˜, the mean probability of quantal release; μ˜, mean; and σ˜2, variance of the uePSC distribution. We show that these equivalent parameters are weighted averages of intrinsic parameters and can be approximated by apparent quantal parameters, therefore establishing a useful analytical link between the apparent and intrinsic parameters. The present study extends previous work on compound binomial analysis of synaptic transmission by highlighting the importance of the product of p and μ, and the variance of that product. Conditions for a unique deconvolution of apparent uniform synaptic parameters have been derived and justified. Our approach does not require independence of synaptic parameters, such as p and μ from each other, therefore the approach will hold even if feedback (i.e., via retrograde transmission) exists between pre and postsynaptic signals. Using numerical simulations we demonstrate how equivalent parameters are meaningful even when there is considerable variation in intrinsic parameters, including systems where subpopulations of high- and low-release probability synapses are present, therefore even under such conditions the apparent parameters estimated from experiments would be informative.

The relationship between Ca2+ release (“Ca2+ sparks”) through ryanodine-sensitive Ca2+ release channels in the sarcoplasmic reticulum and KCa channels was examined in smooth muscle cells from rat cerebral arteries. Whole cell potassium currents at physiological membrane potentials (−40 mV) and intracellular Ca2+ were measured simultaneously, using the perforated patch clamp technique and a laser two-dimensional (x–y) scanning confocal microscope and the fluorescent Ca2+ indicator, fluo-3. Virtually all (96%) detectable Ca2+ sparks were associated with the activation of a spontaneous transient outward current (STOC) through KCa channels. A small number of sparks (5 of 128) were associated with currents smaller than 6 pA (mean amplitude, 4.7 pA, at −40 mV). Approximately 41% of STOCs occurred without a detectable Ca2+ spark. The amplitudes of the Ca2+ sparks correlated with the amplitudes of the STOCs (regression coefficient 0.8; P < 0.05). The half time of decay of Ca2+ sparks (56 ms) was longer than the associated STOCs (9 ms). The mean amplitude of the STOCs, which were associated with Ca2+ sparks, was 33 pA at −40 mV. The mean amplitude of the “sparkless” STOCs was smaller, 16 pA. The very significant increase in KCa channel open probability (>104-fold) during a Ca2+ spark is consistent with local Ca2+ during a spark being in the order of 1–100 μM. Therefore, the increase in fractional fluorescence (F/Fo) measured during a Ca2+ spark (mean 2.04 F/Fo or ∼310 nM Ca2+) appears to significantly underestimate the local Ca2+ that activates KCa channels. These results indicate that the majority of ryanodine receptors that cause Ca2+ sparks are functionally coupled to KCa channels in the surface membrane, providing direct support for the idea that Ca2+ sparks cause STOCs.

Single Ca2+ channel and whole cell currents were measured in smooth muscle cells dissociated from resistance-sized (100-microns diameter) rat cerebral arteries. We sought to quantify the magnitude of Ca2+ channel currents and activity under the putative physiological conditions of these cells: 2 mM [Ca2+]o, steady depolarizations to potentials between -50 and -20 mV, and (where possible) without extrinsic channel agonists. Single Ca2+ channel conductance was measured over a broad range of Ca2+ concentrations (0.5-80 mM). The saturating conductance ranged from 1.5 pS at 0.5 mM to 7.8 pS at 80 mM, with a value of 3.5 pS at 2 mM Ca (unitary currents of 0.18 pA at -40 mV). Both single channel and whole cell Ca2+ currents were measured during pulses and at steady holding potentials. Ca2+ channel open probability and the lower limit for the total number of channels per cell were estimated by dividing the whole-cell Ca2+ currents by the single channel current. We estimate that an average cell has at least 5,000 functional channels with open probabilities of 3.4 x 10(-4) and 2 x 10(-3) at -40 and -20 mV, respectively. An average of 1-10 (-40 mV and -20 mV, respectively) Ca2+ channels are thus open at physiological potentials, carrying approximately 0.5 pA steady Ca2+ current at -30 mV. We also observed a very slow reduction in open probability during steady test potentials when compared with peak pulse responses. This 4-10-fold reduction in activity could not be accounted for by the channel's normal inactivation at our recording potentials between -50 and -20 mV, implying that an additional slow inactivation process may be important in regulating Ca2+ channel activity during steady depolarization.

Voltage-dependent Na+ channels are thought to sense membrane potential with fixed charges located within the membrane's electrical field. Measurement of open probability (Po) as a function of membrane potential gives a quantitative indication of the number of such charges that move through the field in opening the channel. We have used single-channel recording to measure skeletal muscle Na+ channel open probability at its most negative extreme, where channels may open as seldom as once per minute. To prevent fast inactivation from masking the voltage dependence of Po, we have generated a clone of the rat skeletal muscle Na+ channel that is lacking in fast inactivation (IFM1303QQQ). Using this mutant channel expressed in Xenopus oocytes, and the extra resolution afforded by single-channel analysis, we have extended the resolution of the hyperpolarized tail of the Po curve by four orders of magnitude. We show that previous measurements, which indicated a minimum of six effective gating charges, may have been made in a range of Po values that had not yet arrived at its limiting slope. In our preparation, a minimum of 12 charges must function in the activation gating of the channel. Our results will require reevaluation of kinetic models based on six charges, and they have major implications for the interpretation of S4 mutagenesis studies and structure/function models of the Na+ channel.

The measurement of single ion channel kinetics is difficult when those channels exhibit subconductance events. When the kinetics are fast, and when the current magnitudes are small, as is the case for Na+, Ca2+, and some K+ channels, these difficulties can lead to serious errors in the estimation of channel kinetics. I present here a method, based on the construction and analysis of mean-variance histograms, that can overcome these problems. A mean-variance histogram is constructed by calculating the mean current and the current variance within a brief "window" (a set of N consecutive data samples) superimposed on the digitized raw channel data. Systematic movement of this window over the data produces large numbers of mean-variance pairs which can be assembled into a two-dimensional histogram. Defined current levels (open, closed, or sublevel) appear in such plots as low variance regions. The total number of events in such low variance regions is estimated by curve fitting and plotted as a function of window width. This function decreases with the same time constants as the original dwell time probability distribution for each of the regions. The method can therefore be used: 1) to present a qualitative summary of the single channel data from which the signal-to-noise ratio, open channel noise, steadiness of the baseline, and number of conductance levels can be quickly determined; 2) to quantify the dwell time distribution in each of the levels exhibited. In this paper I present the analysis of a Na+ channel recording that had a number of complexities. The signal-to-noise ratio was only about 8 for the main open state, open channel noise, and fast flickers to other states were present, as were a substantial number of subconductance states. "Standard" half-amplitude threshold analysis of these data produce open and closed time histograms that were well fitted by the sum of two exponentials, but with apparently erroneous time constants, whereas the mean-variance histogram technique provided a more credible analysis of the open, closed, and subconductance times for the patch. I also show that the method produces accurate results on simulated data in a wide variety of conditions, whereas the half-amplitude method, when applied to complex simulated data shows the same errors as were apparent in the real data. The utility and the limitations of this new method are discussed.

The role of voltage-dependent Ca channels in carbachol (CCh)-induced contraction of rat bronchus was investigated. Membrane depolarization and BAY K 8644, a Ca channel opener, significantly enhanced CCh-induced contractions. Nisoldipine, an organic Ca channel blocker, significantly inhibited the contractions. Cadmium, an inorganic Ca channel blocker, completely inhibited maintained contractions caused by CCh. These results suggested that the voltage-dependent Ca channels play an important role in sustained cholinergic contractions. This hypothesis was tested further by investigating the properties of single Ca channels of rat bronchus smooth muscle cells. We used 10 mM Ba as the charge carrier and BAY K 8644 to increase open times. The single-channel conductance was 16.8 pS. Steady-state open probability (NP(o)) increased steeply with membrane depolarization (e-fold for 4 mV). The primary effect of CCh (10 microM) on Ca channels was to shift the membrane potential at which NP(o) was half maximal from -34 to -43 mV without changing the steepness factor or maximal NP(o). This CCh-induced increase in NP(o) was not caused by depolarization, because the single-channel current amplitude was unchanged by CCh. We conclude that one of the mechanisms by which CCh opens Ca channels of rat bronchus smooth muscle is by shifting the activation curve in the hyperpolarized direction.

Individual Na+ channels of dissociated frog skeletal muscle cells at 10 degrees C fail to inactivate in 0.02% of depolarizing pulses, thus producing bursts of openings lasting hundreds of milliseconds. We present here a kinetic analysis of 87 such bursts that were recorded in multi-channel patches at four pulse potentials. We used standard dwell-time histograms as well as fluctuation analysis to analyze the gating kinetics of the bursting channels. Since each burst contained only 75-150 openings, detailed characterization of the kinetics from single bursts was not possible. Nevertheless, at this low kinetic resolution, the open and closed times could be well fitted by single exponentials (or Lorentzians for the power spectra). The best estimates of both the open and closed time constants produced by either technique were much more broadly dispersed then expected from experimental or analytical variability, with values varying by as much as an order of magnitude. Furthermore, the values of the open and closed time constants were not significantly correlated with one another from burst to burst. The bursts thus expressed diverse kinetic behaviors, all of which appear to be manifestations of a single type of Na+ channel. Although the opening and closing rates were dispersed, their average values were close to those of alpha m and 2 beta m derived from fits to the early transient Na+ currents over the same voltage range. We propose a model in which the channel has both primary states (e.g., open, closed, and inactivated), as well as "modes" that are associated with independent alterations in the rate constants for transition between each of these primary states.

Ionic mechanisms of the action potential of longitudinal flight muscle fiber were studied in the fly,Sarcophaga bullata. Depolarization of the fiber membrane initiates the fast spikes which may be followed by a plateau response. The fast spike is a graded response in normal saline, but is converted to an all-or-none response in TEA solutions. It is eliminated in Ca-free media, suppressed by 12 mM Co++, and the overshoot increases with an increasing Ca++ concentration. Both the spikes and the plateau are TTX insensitive. Although the fast spike is produced in Na-free media, the rate of rise and overshoot of the spike are reduced. However, Na+ will not support spikes in the absence of Ca++. Plateau responses in normal saline are about 12 s in duration with a potential level of about −25 mV. Both the plateau potential and duration increase with an increasing Na+concentration, and the plateaus are eliminated in Na-free media.

The currents through single Na+ channels were recorded from dissociated cells of the flexor digitorum brevis muscle of the mouse. At 15 degrees C the prolonged bursts of Na+ channel openings produced by application of the drug DPI 201-106 had brief sojourns to subconductance levels. The subconductance events were relatively rare and brief, but could be identified using a new technique that sorts amplitude estimates based on their variance. The resulting "levels histogram" had a resolution of the conductance levels during channel activity that was superior to that of standard amplitude histograms. Cooling the preparation to 0 degrees C prolonged the subconductance events, and permitted further quantitative analysis of their amplitudes, as well as clear observations of single-channel subconductance events from untreated Na+ channels. In all cases the results were similar: a subconductance level, with an amplitude of roughly 35% of the fully open conductance and similar reversal potential, was present in both drug-treated and normal Na+ channels. Drug-treated channels spent approximately 3-6% of their total open time in the subconductance state over a range of potentials that caused the open probability to vary between 0.1 and 0.9. The summed levels histograms from many channels had a distinctive form, with broader, asymmetrical open and substate distributions compared with those of the closed state. Individual subconductance events to levels other than the most common 35% were also observed. I conclude that subconductance events are a normal subset of the open state of Na+ channels, whether or not they are drug treated. The subconductance events may represent a conformational alteration of the channel that occurs when it conducts ions.

Single channel signals were initially observed in artificial bilayer membranes (Bean et al., 1969; Gordon and Haydon, 1972; Hladkey and Haydon, 1972). They were first seen in biological membranes using the patch clamp technique (Neher and Sakmann, 1976). A number of excellent reviews have detailed this technique, including gigohm (>109 ohm) seals and ultra-high resolution recordings, as well as the many different types of preparations and channels from which recordings have been made (Neher et al., 1978; Hamill et al., 1981). In this chapter I will examine a different aspect of this subject. I seek to clarify the reasons for recording single channels, instead of measuring the mean behavior of a population of channels (whole cell recording), or the fluctuations caused by the random activity of such a population.