Search

Understanding and tuning the ligand shell composition in colloidal halide perovskite nanocrystals (NCs) has been done systematically only for Pb-based perovskites, while much less is known on the surface of Pb-free perovskite systems. Here, we reveal the ligand shell architecture of Bi-doped Cs2Ag1-xNaxInCl6NCs via nuclear magnetic resonance analysis. This material, in its bulk form, was found to have a photoluminescence quantum yield (PLQY) as high as 86%, which is a record value for halide double perovskites. Our results show that both amines and carboxylic acids are present and homogeneously distributed over the surface of the NCs. Notably, even for an optimized surface ligand coating, achieved by combining dodecanoic acid and decylamine, a maximum PLQY value of only 37% is reached, with no further improvements observed when exploiting post-synthesis ligand exchange procedures (involving Cs-oleate, different ammonium halides, thiocyanates, and sulfonic acids). Our density functional theory calculations indicate that, even with the best ligand combinations, a small fraction of unpassivated surface sites, namely undercoordinated Cl ions, is sufficient to create deep trap states, opposite to the case of Pb-based perovskites that exhibit much higher defect tolerance. This was corroborated by our transient absorption measurements, which evidenced that an ultrafast trapping of holes (most likely mediated by surface Cl-trap states) competes with their localization at the AgCl6octahedra, from where, instead, they can undergo an optically active recombination, yielding the observed PL emission. Our results highlight that alternative surface passivation strategies should be devised in order to further optimize the PLQY of double-perovskite NCs, which might include their incorporation inside inorganic shells.

The interaction of lead bromide perovskite nanocrystals with charged ligands, such as salts, zwitterions, or acid-base pairs, has been extensively documented over the past few years. On the other hand, little is known about the reactivity of perovskite nanocrystals toward neutral ligands. To fill this gap, in this work we study the interaction of CsPbBr3 nanocrystals passivated with didodecyldimethylammonium bromide (DDABr) toward a series of exogenous acid/base ligands using a combined computational and experimental approach. Our analysis indicates that DDABr-capped nanocrystals are inert toward most ligands, except for carboxylic, phosphonic, and sulfonic acids. In agreement with the calculations, our experimental results indicate that the higher the acidity of the ligands employed in the treatment, the more etching is observed. In detail, dodecylbenzenesulfonic acid (pKa = -1.8) is found to etch the nanocrystals, causing their complete degradation. On the other hand, oleic and oleylphosphonic acids (pKa 9.9 and 2, respectively) interact with surface-bound DDA molecules, causing their displacement as DDABr in various amounts, which can be as high as 40% (achieved with oleylphosphonic acid). Despite the stripping of DDA ligands, the optical properties of the nanocrystals, as well as structure and morphology, remain substantially unaffected, empirically demonstrating the defect tolerance characterizing such materials. Our study provides not only a clear overview on the interaction between perovskite nanocrystals and neutral ligands but also presents an effective ligand stripping strategy.

We elucidate here the nature of the emissive states in Rb7Sb3Cl16 nanocrystals (NCs) for which we report a synthesis. These NCs have a crystal structure comprising both isolated [SbCl6]3- octahedra and isolated [Sb2Cl10]4- dimers of octahedra. The optical properties of Rb7Sb3Cl16 NCs are compared with those of Sb-doped Rb3InCl6 NCs, the latter containing only isolated [SbCl6]3- octahedra. The remarkably similar behaviors of the two systems indicate that the optical emission in both materials originates from the isolated octahedra. Density functional theory calculations suggest that the [SbCl6]3- octahedra are optically active in emission because the local arrangement of the Rb+ ions around the octahedra limits the elongation of the Sb-Cl bonds upon excitation, helping to confine the self-trapped exciton in them. Conversely, in the [Sb2Cl10]4- dimers the constraining effect of the surrounding Rb+ ions is less marked and the Sb-Cl bonds fully break upon photoexcitation, opening up an efficient nonradiative channel for the self-trapped excitons.

In the last two decades, colloidal semiconductor nanocrystals have emerged as a phenomenal research topic due to their size-dependent optoelectronic properties and to their outstanding versatility in many technological applications. In this review, we provide an historical account of the most relevant computational works that have been carried out to understand atomistically the electronic structure of these materials, including the main requirements needed for the preparation of nanocrystal models that align well with the experiments. We further discuss how the advancement of these computational tools has affected the analysis of these nanomaterials over the years. We focus our review on the three main families of colloidal semiconductor nanocrystals: group II-VI and IV-VI metal chalcogenides, group III-V metal pnictogenides and metal halides, in particular lead-based halide perovskites. We discuss the most recent research frontiers and outline the future outlooks expected in this field from a computational perspective.

Conspectus Next-generation colloidal semiconductor nanocrystals featuring enhanced optoelectronic properties and processability are expected to arise from complete mastering of the nanocrystals’ surface characteristics, attained by a rational engineering of the passivating ligands. This aspect is highly challenging, as it underlies a detailed understanding of the critical chemical processes that occur at the nanocrystal–ligand–solvent interface, a task that is prohibitive because of the limited number of nanocrystal syntheses that could be tried in the lab, where only a few dozen of the commercially available starting ligands can actually be explored. However, this challenging goal can be addressed nowadays by combining experiments with atomistic calculations and machine learning algorithms. In the last decades we indeed witnessed major advances in the development and application of computational software dedicated to the solution of the electronic structure problem as well as the expansion of tools to improve the sampling and analysis in classical molecular dynamics simulations. More recently, this progress has also embraced the integration of machine learning in computational chemistry and in the discovery of new drugs. We expect that soon this plethora of computational tools will have a formidable impact also in the field of colloidal semiconductor nanocrystals. In this Account, we present some of the most recent developments in the atomistic description of colloidal nanocrystals. In particular, we show how our group has been developing a set of programs interfaced with available computational chemistry software packages that allow the thermodynamic controlling factors in the nanocrystal surface chemistry to be captured atomistically by including explicit solvent molecules, ligands, and nanocrystal sizes that match the experiments. At the same time, we are also setting up an infrastructure to automate the efficient execution of thousands of calculations that will enable the collection of sufficient data to be processed by machine learning. To fully capture the power of these computational tools in the chemistry of colloidal nanocrystals, we decided to embed the thermodynamics behind the dissolution/precipitation of nanocrystal–ligand complexes in organic solvents and the crucial process of binding/detachment of ligands at the nanocrystal surface into a unique chemical framework. We show that formalizing this mechanism with a computational bird’s eye view helps in deducing the critical factors that govern the stabilization of colloidal dispersions of nanocrystals in an organic solvent as well as the definition of those key parameters that need to be calculated to manipulate surface ligands. This approach has the ultimate goal of engineering surface ligands in silico, anticipating and driving the experiments in the lab.

Understanding and tuning the ligand shell composition in colloidal halide perovskite nanocrystals (NCs) has been done systematically only for Pb-based perovskites, while much less is known on the surface of Pb-free perovskite systems. Here, we reveal the ligand shell architecture of Bi-doped Cs2Ag1-xNaxInCl6NCs via nuclear magnetic resonance analysis. This material, in its bulk form, was found to have a photoluminescence quantum yield (PLQY) as high as 86%, a record value for halide double perovskites. Our results show that both amines and carboxylic acids are present and homogeneously distributed over the surface of the NCs. Notably, even for an optimized surface ligand coating, achieved by combining dodecanoic acid and decylamine, a maximum PLQY value of only 37% is reached, with no further improvements observed when exploiting post-synthesis ligand exchange procedures (involving Cs-oleate, different ammonium halides, thiocyanates and sulfonic acids). Our density functional theory calculations indicate that, even with the best ligands combination, a small fraction of unpassivated surface sites, namely undercoordinated Cl ions, is sufficient to create deep trap states, opposite to the case of Pb-based perovskites that exhibit much higher defect tolerance. This was corroborated by our transient absorption measurements, which showed that an ultrafast trapping of holes (most likely mediated by surface Cl-trap states) competes with their localization at the AgCl6octahedra, from where, instead, they can undergo an optically active recombination yielding the observed PL emission. Our results highlight that alternative surface passivation strategies should be devised to further optimize the PLQY of double perovskite NCs, which might include their incorporation inside inorganic shells.

In this work, we report the hot-injection synthesis of Cs

In this work, we report the hot-injection synthesis of Cs3ZnCl5 colloidal nanocrystals (NCs) with tunable amounts of Cu+ and Mn2+ substituent cations. All the samples had a rodlike morphology, with a diameter of 14 nm and a length of 30-100 nm. Alloying did not alter the crystal structure of the host Cs3ZnCl5 NCs, and Cu ions were mainly introduced in the oxidation state +1 according to X-ray photoelectron and electron paramagnetic resonance spectroscopies. The spectroscopic analysis of unalloyed, Cu-alloyed, Mn-alloyed, and Cu, Mn coalloyed NCs indicated that (i) the Cs3ZnCl5 NCs have a large band gap of 5.35 eV; (ii) Cu(I) aliovalent alloying leads to an absorption shoulder/peak at 4.8 eV and cyan photoluminescence (PL) peaked at 2.50 eV; (iii) Mn(II) isovalent alloying leads to weak Mn PL, which intensifies remarkably in the coalloyed samples, prompted by an energy transfer (ET) process between the Cu and Mn centers, favored by the overlap between the lowest (6A1 → 4T1) transition for tetrahedrally coordinated Mn2+ and the PL profile from Cu(I) species in the Cs3ZnCl5 NCs. The efficiency of this ET process reaches a value of 61% for the sample with the highest extent of Mn alloying. The PL quantum yield (QY) values in these Cu, Mn coalloyed NCs are lower at higher Mn contents. The analysis of the Mn PL dynamics in these samples indicates that this PL drop stems from inter-Mn exciton migration, which increases the likelihood of trapping in defect sites, in agreement with previous studies.

We report the composition-dependent optical properties of Bi-doped Cs2Ag1-xNaxInCl6 nanocrystals (NCs) having a double perovskite crystal structure. Their photoluminescence (PL) was characterized by a large Stokes shift, and the PL quantum yield increased with the amount of Na up to ∼22% for the Cs2Ag0.4Na0.6InCl6 stoichiometry. The presence of Bi3+ dopants was crucial to achieve high PL quantum yields (PLQYs) as nondoped NC systems were not emissive. Density functional theory calculations revealed that the substitution of Ag+ with Na+ leads to localization of AgCl6 energy levels above the valence band maximum, whereas doping with Bi3+ creates BiCl6 states below the conduction band minimum. As such, the PL emission stems from trapped emission between states localized in the BiCl6 and AgCl6 octahedra, respectively. Our findings indicated that both the partial replacement of Ag+ with Na+ ions and doping with Bi3+ cations are essential in order to optimize the PL emission of these systems.

We synthesize colloidal nanocrystals (NCs) of Rb3InCl6, composed of isolated metal halide octahedra (“0D”), and of Cs2NaInCl6 and Cs2KInCl6 double perovskites, where all octahedra share corners and are interconnected (“3D”), with the aim to elucidate and compare their optical features once doped with Sb3+ ions. Our optical and computational analyses evidence that the photoluminescence quantum yield (PLQY) of all these systems is consistently lower than that of the corresponding bulk materials due to the presence of deep surface traps from under-coordinated halide ions. Also, Sb-doped “0D” Rb3InCl6 NCs exhibit a higher PLQY than Sb-doped “3D” Cs2NaInCl6 and Cs2KInCl6 NCs, most likely because excitons responsible for the PL emission migrate to the surface faster in 3D NCs than in 0D NCs. We also observe that all these systems feature a large Stokes shift (varying from system to system), a feature that should be of interest for applications in photon management and scintillation technologies. Scintillation properties are evaluated via radioluminescence experiments, and re-absorption-free waveguiding performance in large-area plastic scintillators is assessed using Monte Carlo ray-tracing simulations.

We report the synthesis of colloidal CsPbX3-Pb4S3Br2 (X=Cl, Br, I) nanocrystal heterostructures, providing an example of a sharp and atomically resolved epitaxial interface between a metal halide perovskite and a non-perovskite lattice. The CsPbBr3-Pb4S3Br2 nanocrystals are prepared by a two-step direct synthesis, using pre-formed sub-nm CsPbBr3 clusters. Density functional theory calculations indicate the creation of a quasi-type II alignment at the heterointerface, as well as the formation of localized trap states, respectively promoting ultrafast separation of photogenerated excitons and carrier trapping, as confirmed by spectroscopic experiments. Post-synthesis reaction with either Cl- or I- ions delivers the corresponding CsPbCl3-Pb4S3Br2 and CsPbI3-Pb4S3Br2 heterostructures, thus enabling anion exchange only in the perovskite domain. An increased structural rigidity is conferred to the perovskite lattice when it is interfaced with the chalcohalide lattice. This is attested by the improved stability of the metastable g phase (or “black” phase) of CsPbI3 in the CsPbI3-Pb4S3Br2 heterostructure.

We devised a hot-injection synthesis to prepare colloidal double-perovskite Cs2NaBiCl6 nanocrystals (NCs). We also examined the effects of replacing Na+ with Ag+ cations by preparing and characterizing Cs2Na1-x Ag x BiCl6 alloy NCs with x ranging from 0 to 1. Whereas Cs2NaBiCl6 NCs were not emissive, Cs2Na1-x Ag x BiCl6 NCs featured a broad photoluminescence band at ∼690 nm, Stokes-shifted from the respective absorption by ≥1.5 eV. The emission efficiency was maximized for low Ag+ amounts, reaching ∼3% for the Cs2Na0.95Ag0.05BiCl6 composition. Density functional theory calculations coupled with spectroscopic investigations revealed that Cs2Na1-x Ag x BiCl6 NCs are characterized by a complex photophysics stemming from the interplay of (i) radiative recombination via trapped excitons localized in spatially connected AgCl6-BiCl6 octahedra; (ii) surface traps, located on undercoordinated surface Bi centers, behaving as phonon-assisted nonradiative decay channels; and (iii) a thermal equilibrium between trapping and detrapping processes. These results offer insights into developing double-perovskite NCs with enhanced optoelectronic efficiency.