Search

Abstract Skeletal muscle atrophy occurs in several pathological conditions. Among other reasons, high-dose or long-term administration of glucocorticoids increases circulating glucocorticoid levels and causes muscle atrophy. The purpose of this study was to investigate whether Lithospermum erythrorhizon and Lonicera japonica complex extract (LELJ) has a beneficial effect on dexamethasone (Dexa)-induced muscle atrophy. In Dexa-induced myotube atrophy, treatment with LELJ increased myotube diameter, decreased the expression of muscle atrophy markers, and increased the expression of myosin heavy chain (MHC) isoforms. Supplementation with LELJ improved muscle function and performance in mice with Dexa-induced muscle atrophy as demonstrated by grip strength and running tests. Additionally, it increased skeletal muscle mass, size, and expression of MHC isoforms and protein synthesis-related markers. Furthermore, it reduced the upregulated protein levels of skeletal muscle atrophy markers in Dexa-treated mice. Supplementation with LELJ reversed Dexa-induced translocation of the glucocorticoid receptor and forkhead box O3 from the cytosol to the nucleus in skeletal muscles. LELJ also ameliorated age-related muscle loss by extending lifespan and increasing locomotor capacity in Caenorhabditis elegans. We identified loganin and lithospermic acid as bioactive compounds of LELJ and found that treatment with these agents increased myotube diameter, MHC isoform, and puromycin protein levels, and decreased atrophy markers in Dexa-treated myotubes. The current findings underscore how LELJ can prevent Dexa-induced skeletal muscle atrophy, attributing the effects to loganin and lithospermic acid.

Abstract Background Muscle atrophy is characterized by decreased muscle mass, function, and strength. Synthetic glucocorticoids, including dexamethasone (Dexa), are commonly used to treat autoimmune diseases. However, prolonged exposure of Dexa with high dose exerts severe side effects, including muscle atrophy. The purpose of this study was to investigate whether Gromwell root extract (GW) can prevent Dexa-induced muscle atrophy in C2C12 cells and mice and to characterize the composition of GW to identify bioactive compounds. Methods For in vitro experiments, GW (0.5 and 1 µg/mL) or lithospermic acid (LA, 5 and 10 µM) was added to C2C12 myotubes on day 4 of differentiation and incubated for 24 h, along with 50 µM Dexa. For in vivo experiment, four-week-old male C57BL/6 mice were randomly divided into the four following groups (n = 7/group): Con group, Dexa group, GW0.1 group, and GW0.2 group. Mice were fed experimental diets of AIN-93 M with or without 0.1 or 0.2% GW for 4 weeks. Subsequently, muscle atrophy was induced by administering an intraperitoneal injection of Dexa at a dose of 15 mg/kg/day for 38 days, in conjunction with dietary intake. Results In Dexa-induced myotube atrophy, treatment with GW increased myotube diameter, reduced the expression of muscle atrophy markers, and enhanced the expression of myosin heavy chain (MHC) isoforms in C2C12 cells. Supplementation with the GW improved muscle function and performance in mice with Dexa-induced muscle atrophy, evidenced in the grip strength and running tests. The GW group showed increased lean body mass, skeletal muscle mass, size, and myosin heavy chain isoform expression, along with reduced skeletal muscle atrophy markers in Dexa-injected mice. Supplementation with GW increased protein synthesis and decreased protein degradation through the Akt/mammalian target of rapamycin and glucocorticoid receptor/forkhead box O3 signaling pathways, respectively. We identified LA as a potential bioactive component of the GW. LA treatment increased myotube diameter and decreased the expression of muscle atrophy markers in Dexa-induced C2C12 cells. Conclusions These findings underscore the potential of the GW in preventing Dexa-induced skeletal muscle atrophy and highlight the contribution of LA to its effects.

Abstract Background This study was conducted to evaluate the efficiency and accuracy of the daily patient setup for breast cancer patients by applying surface-guided radiation therapy (SGRT) using the Halcyon system instead of conventional laser alignment based on the skin marking method. Methods and materials We retrospectively investigated 228 treatment fractions using two different initial patient setup methods. The accuracy of the residual rotational error of the SGRT system was evaluated by using an in-house breast phantom. The residual translational error was analyzed using the couch position difference in the vertical, longitudinal, and lateral directions between the reference computed tomography and daily kilo-voltage cone beam computed tomography acquired from the record and verification system. The residual rotational error (pitch, yaw, and roll) was also calculated using an auto rigid registration between the two images based on Velocity. The total setup time, which combined the initial setup time and imaging time, was analyzed to evaluate the efficiency of the daily patient setup for SGRT. Results The average residual rotational errors using the in-house fabricated breast phantom for pitch, roll, and yaw were 0.14°, 0.13°, and 0.29°, respectively. The average differences in the couch positions for laser alignment based on the skin marking method were 2.7 ± 1.6 mm, 2.0 ± 1.2 mm, and 2.1 ± 1.0 mm for the vertical, longitudinal, and lateral directions, respectively. For SGRT, the average differences in the couch positions were 1.9 ± 1.2 mm, 2.9 ± 2.1 mm, and 1.9 ± 0.7 mm for the vertical, longitudinal, and lateral directions, respectively. The rotational errors for pitch, yaw, and roll without the surface-guided radiation therapy approach were 0.32 ± 0.30°, 0.51 ± 0.24°, and 0.29 ± 0.22°, respectively. For SGRT, the rotational errors were 0.30 ± 0.22°, 0.51 ± 0.26°, and 0.19 ± 0.13°, respectively. The average total setup times considering both the initial setup time and imaging time were 314 s and 331 s, respectively, with and without SGRT. Conclusion We demonstrated that using SGRT improves the accuracy and efficiency of initial patient setups in breast cancer patients using the Halcyon system, which has limitations in correcting the rotational offset.

Studies have shown that the implementation of OSC (off-site construction) is beneficial. However, most studies have relied on simulated project data to forecast the potential advantages of OSC, often using surveys or expert consultations as their primary research methods. Others have based their analyses on a specific sample size, focusing on cost savings and reduced construction time. Such approaches inherently possess limitations. In this study, we define “OSC level measurement” as the comprehensive process of quantifying the application of OSC elements throughout the project lifecycle. Numerous studies have proposed methods for OSC level measurements. However, they vary in their applicability to different facility types and project phases and employ country-specific quantification items and methods. These variations complicate the comparison or integration of OSC measurement methods on an international scale. The comprehensiveness of the representations in the existing industry foundation classes (IFCs), which is required to carry out automated OSC level measurement, is not yet investigated. This study aimed to systematically compare and analyze various methods for measuring OSC levels in construction projects. We intend to provide researchers and professionals with the necessary characteristics and requirements to develop standardized OSC level measurement methods in the future. The key takeaways emphasize the need for establishing the necessary standardization of the list of OSC elements, creating a framework for standardized quantification items using IFC elements based on BIM data to measure the extent of OSC elements’ application, and unifying the quantification methods for assessing the proportion of OSC elements. Ultimately, this standardization will pave the way for more informed decision making, innovation, and the implementation of sustainable solutions in the construction industry.

Abstract Purpose Contact lens-type ocular in vivo dosimeters (CLODs) were recently developed as the first in vivo dosimeter that can be worn directly on the eye to measure the dose delivered to the lens during radiotherapy. However, it has an inherent uncertainty because of its curved shape. Newton’s ring effect inevitably occurs because the spacing between the glass window and the active layer is not constant. Furthermore, it involves a large uncertainty because the objective of the CLOD with such morphological characteristics is to measure the dose delivered to an out-of-field lens. In this study, we aimed to investigate the effects of various compensating materials on the sensitivity, accuracy, and uniformity of analysis using a curved CLOD. We developed a new scanning methodology that involves applying a compensating material to reduce the uncertainty caused by the air gap. Methods Four compensating materials—Dragon Skin™ 10 (DS), a transparent silicon material, SORTA-Clear™ 40 (SC), optical grease (OG), and air (no compensating material)—were used in this study. The CLOD was scanned in the reflective mode and transmission mode using each compensating material. We then examined the sensitivity, accuracy, and scan uniformity to evaluate the scanning methodology using compensating materials. Results The increase in sensitivity was the highest for OG compared to that for air in the reflective mode. On average, the sensitivity in the reflective mode was higher than that in the transmission mode by a factor of 2.5 for each dose. Among the four compensating materials, OG had the smallest uncertainty. Therefore, the best scan uniformity was achieved when OG was used. Conclusions Scanning methodology was proposed in which a compensating material is applied for a curved lens-type dosimeter. Our results show that OG is the most suitable compensating material to obtain the best accuracy of dose analysis. Following this methodology, the scan uncertainty of curved dosimeters significantly decreased.

PurposeWe applied a radiomics approach to skin surface images to objectively assess acute radiation dermatitis in patients undergoing radiotherapy for breast cancer.MethodsA prospective cohort study of 20 patients was conducted. Skin surface images in normal, polarized, and ultraviolet (UV) modes were acquired using a skin analysis device before starting radiotherapy ('Before RT'), approximately 7 days after the first treatment ('RT D7'), on 'RT D14', and approximately 10 days after the radiotherapy ended ('After RT D10'). Eighteen types of radiomic feature ratios were calculated based on the values acquired 'Before RT'. We measured skin doses in ipsilateral breasts using optically stimulated luminescent dosimeters on the first day of radiotherapy. Clinical evaluation of acute radiation dermatitis was performed using the Radiation Therapy Oncology Group scoring criteria on 'RT D14' and 'After RT D10'. Several statistical analysis methods were used in this study to test the performance of radiomic features as indicators of radiodermatitis evaluation.ResultsAs the skin was damaged by radiation, the energy for normal mode and sum variance for polarized and UV modes decreased significantly for ipsilateral breasts, whereas contralateral breasts exhibited a smaller decrease with statistical significance. The radiomic feature ratios at 'RT D7' had strong correlations to skin doses and those at 'RT D14' and 'after RT D10' with statistical significance.ConclusionsThe energy for normal mode and sum variance for polarized and UV modes demonstrated the potential to evaluate and predict acute radiation, which assists in its appropriate management.

This study aimed to assess the performance of a tongue-positioning device in interfractional tongue position reproducibility by cone-beam computed tomography (CBCT). Fifty-two patients treated with radiation therapy (RT) while using a tongue positioning device were included in the study. All patients were treated with 28 or 30 fractions using the volumetric modulated arc therapy technique. CBCT images were acquired at the 1st, 7th, 11th, 15th, 19th, 23th, and 27th fractions. Tongues on planning computed tomography (pCT) and CBCT images were contoured in the treatment planning system. Geometric differences in the tongue between pCT and CBCT were assessed by the Dice similarity coefficient (DSC) and averaged Hausdorff distance (AHD). Two-dimensional in vivo measurements using radiochromic films were performed in 13 patients once a week during sessions. The planned dose distributions were compared with the measured dose distributions using gamma analysis with criteria of 3%/3 mm. In all patients, the mean DSC at the 1st fraction (pCT versus 1st CBCT) was 0.80 while the mean DSC at the 27th fraction (pCT versus 27th CBCT) was 0.77 with statistical significance (p-value = 0.015). There was no statistically significant difference in DSC between the 1st fraction and any other fraction, except for the 27th fraction. There was statistically significant difference in AHD between the 1st fraction and the 19th, 23th, and 27th fractions (p-value < 0.05). In vivo measurements showed an average gamma passing rate of 90.54%. There was no significant difference between measurements at the 1st week and those at other weeks. The tongue geometry during RT was compared between pCT and CBCT. In conclusion, the novel tongue-positioning device was found to minimize interfractional variations in position and shape of the tongue.

The Program for International Student Assessment (PISA) aims to provide comparative data on 15-year-olds’ academic performance and well-being. The purpose of the current study is to explore and compare the variables that predict the reading literacy and life satisfaction of U.S. and South Korean students. The random forest algorithm, which is a machine learning approach, was applied to PISA 2018 data (4,677 U.S. students and 6,650 South Korean students) to explore and select the key variables among 305 variables that predict reading literacy and life satisfaction. In each random forest analysis, one for the U.S. and another for South Korea, 23 variables were derived as key variables in students’ reading literacy. In addition, 23 variables in the U.S. and 26 variables in South Korea were derived as important variables for students’ life satisfaction. The multilevel analysis revealed that various student-, teacher- or school-related key variables derived from the random forest were statistically related to either U.S. and/or South Korean students’ reading literacy and/or life satisfaction. The current study proposes to use a machine learning approach to examine international large-scale data for an international comparison. The implications of the current study and suggestions for future research are discussed.

Despite increased research interest in improving students' scientific inquiry abilities, how to conduct scientific inquiry using science textbooks that are easily accessible to primary school students remains understudied. This study developed and verified an inquiry activity model (IAM) to improve the performance of primary school students in science textbook inquiry activities. Data were collected from sixth-grade primary students (n = 167) to analyze the difficulty level of textbook inquiry activities. An analysis tool was developed, focusing on inquiry skills and process flow. Expert analysis increased the tool's validity. The analysis revealed that students possessed low integrated inquiry skills, were partially aware of the inquiry process flow, and could not design experiments. Hence, the IAM was developed to enhance students' ability to perform textbook inquiry activities and understand the activity phases. It emphasized the flow and representation of the inquiry process for students to easily recall the contents as they learn the interconnectivity between phases. The post-test of the experimental group and the inquiry process flow chart showed significant improvement in all areas of inquiry ability. The scores for "connections" and "interconnectivity" in the inquiry process flow were high, reflecting the model's effectiveness in showing the interconnectedness of all stages.

Alzheimer’s disease, a major cause of dementia, is characterized by impaired cholinergic function, increased oxidative stress, and amyloid cascade induction. Sesame lignans have attracted considerable attention owing to their beneficial effects on brain health. This study investigated the neuroprotective potential of lignan-rich sesame cultivars. Among the 10 sesame varieties studied, Milyang 74 (M74) extracts exhibited the highest total lignan content (17.71 mg/g) and in vitro acetylcholinesterase (AChE) inhibitory activity (66.17%, 0.4 mg/mL). M74 extracts were the most effective in improving cell viability and inhibiting reactive oxygen species (ROS) and malondialdehyde (MDA) generation in amyloid-β25-35 fragment-treated SH-SY5Y cells. Thus, M74 was used to evaluate the nootropic effects of sesame extracts and oil on scopolamine (2 mg/kg)-induced memory impairment in mice compared to the control cultivar (Goenback). Pretreatment with the M74 extract (250 and 500 mg/kg) and oil (1 and 2 mL/kg) effectively improved memory disorder in mice (demonstrated by the passive avoidance test), inhibited AChE, and enhanced acetylcholine (Ach) levels. Moreover, immunohistochemistry and Western blot results showed that the M74 extract and oil reversed the scopolamine-induced increase in APP, BACE-1, and presenilin expression levels in the amyloid cascade and decreased BDNF and NGF expression levels in neuronal regeneration.

Abstract The purpose of this study was to investigate the effect of administering intermittent parathyroid hormone (iPTH) before tooth extraction versus after tooth extraction on the risk of developing MRONJ in experimental animal model. Twenty-five ovariectomized rats received 6 weeks of bisphosphonate therapy. They were classified into 3 groups, based on the timing of the medication, as Control, Pre-PTH and Post-PTH groups. For Control group, normal saline was administered before and after tooth extraction. iPTH was administered during 4 weeks before tooth extraction for Pre-PTH group and after tooth extraction for Post-PTH group. The animals were euthanized 8 weeks after tooth extraction. Macroscopic, histological, micro-computed tomography (micro-CT), and histomorphometric examinations were conducted. The incidences of impaired healing were 11.11% both in Pre-PTH and Post-PTH groups, which was lower than the Control group (42.86%). Bone healing in the extraction socket, based on micro-CT and histomorphometry evaluations, was best in Post-PTH and worst in Control group. The Pre-PTH group showed moderate healing pattern. Despite of limitations in this study, the authors identified Pre-PTH group seems to have positive effect on extraction socket healing. With regard to timing, administering iPTH after tooth extraction was superior to applying it before tooth extraction.

Purpose We analyzed skin images with various color space models to objectively assess radiodermatitis severity in patients receiving whole-breast radiotherapy. Methods Twenty female patients diagnosed with breast cancer were enrolled prospectively. All patients received whole-breast radiotherapy without boost irradiation. Skin images for both irradiated and unirradiated breasts were recorded in red-green-blue (RGB) color space using a mobile skin analysis device. For longitudinal analysis, the images were acquired before radiotherapy (RTbefore), approximately 7 days after the first fraction of radiotherapy (RT7days), RT14days, and approximately 10 days after radiotherapy completion (RTafter). Four color space models (RGB, hue-saturation-value (HSV), L*a*b*, and YCbCr models) were employed to calculate twelve color space parameters for each skin image. Skin dose measurements for irradiated breasts were performed using nanoDot optically stimulated luminescent dosimeters on the first fraction of radiotherapy. Subsequently, acute radiation dermatitis in each patient was assessed according to the Radiation Therapy Oncology Group scoring criteria at both RT14days and RTafter. Finally, several statistical analysis methods were applied to investigate the performance of the color space parameters to objectively assess the radiodermatitis. Results Owing to radiation-induced skin damage, R value of RGB model as well as S and V values of the HSV model for irradiated breasts increased significantly, while those for unirradiated breasts showed smaller increases. These parameters showed the longitudinal changes in color space parameters within each group and between groups over time with statistical significance. Strong correlations of the parameters for irradiated breasts at RT7days with skin doses and those at RTafter were observed with statistical significance. Conclusion The R value of RGB model as well as the S and V values of HSV model showed relatively better performance in evaluating the acute radiation dermatitis. These color space parameters could therefore serve as useful tools to assess radiodermatitis severity in a dose-dependent manner.

Abstract Background Comprehensively textural feature performance test from volumetric modulated arc therapy (VMAT) fluences to predict plan delivery accuracy. Methods A total of 240 VMAT plans for various treatment sites were analyzed, with Trilogy and TrueBeam STx systems. Fluence maps superposed fluences at each control point per plan. The textural features were the angular second moment (ASM), inverse difference moment (IDM), contrast, variance, correlation, and entropy, calculated from fluence maps using three displacement distances. Correlation analysis of textural feature performance as predictors of VMAT delivery accuracy used global gamma passing rates with MapCHECK2 and ArcCHECK dosimeters, and mechanical delivery errors calculated from machine log files. Results Spearman’s rank correlation coefficients (r) of the ASM (d = 10) to the gamma passing rates with 1%/2 mm using the MapCHECK2 were 0.358 and 0.519, respectively (p

Abstract Background This study compared adaptive replanning and repositioning corrections based on soft-tissue matching for prostate cancer by using the magnetic resonance-guided radiation therapy (MRgRT) system. Methods A total of 19 patients with prostate cancer were selected retrospectively. Weekly magnetic resonance image (MRI) scans were acquired for 5 weeks for each patient to observe the anatomic changes during the treatment course. Initial intensity-modulated radiation therapy (IMRT) plans (iIMRT) were generated for each patient with 13 coplanar 60Co beams on a ViewRay™ system. Two techniques were applied: patient repositioning and replanning. For patient repositioning, one plan was created: soft-tissue (prostate) matching (Soft). The dose distribution was calculated for each MRI with the beam delivery parameters from the initial IMRT plan. The replanning technique was used to generate the Adaptive plan, which was the reoptimized plan for the weekly MRI. The dose-volumetric parameters of the planning target volume (PTV), bladder, and rectum were calculated for all plans. During the treatment course, the PTV, bladder, and rectum were evaluated for changes in volume and the effect on dosimetric parameters. The differences between the dose-volumetric parameters of the plans were examined through the Wilcoxon test. The initial plan was used as a baseline to compare the differences. Results The Adaptive plan showed better target coverage during the treatment period, but the change was not significant in the Soft plan. There were significant differences in D98%, D95%, and D2% in PTV between the Soft and Adaptive plans (p

Abstract Background The aim of this study was to compare the plan quality of magnetic-resonance image-based intensity modulated radiation therapy (MRI-based-IMRT) with the MRIdian Linac system to that of volumetric modulated arc therapy (VMAT) with the TrueBeam STx system for lung stereotactic ablative radiotherapy (SABR). Methods A total of 22 patients with tumors located in the lower lobe were retrospectively selected for the study. For each patient, both the MRI-based-IMRT and VMAT plans were generated using an identical CT image set and identical structures with the exception of the planning target volume (PTV). The PTVs of the MRI-based-IMRT were generated by adding an isotropic margin of 3 mm from the gross tumor volume, whereas those of VMAT were generated by adding an isotropic margin of 5 mm from the internal target volume. For both the MRI-based-IMRT and VMAT, the prescription doses to the PTVs were 60 Gy in four fractions. Results The average PTV volume of the MRI-based-IMRT was approximately 4-times smaller than that of VMAT (p

Abstract Background This study set out to evaluate the effect of dose rate on normal tissues (the lung, in particular) and the variation in the treatment efficiency as determined by the monitor unit (MU) and energy applied in Linac-based volumetric arc therapy (VMAT) total marrow irradiation (TMI). Methods Linac-based VMAT plans were generated for the TMI for six patients. The planning target volume (PTV) was divided into six sub-volumes, each of which had their own isocenter. To examine the effect of the dose rate and energy, a range of MU rates (40, 60, 80, 100, 300, and 600 MU/min) were selected for 6, 10, and 15 MV. All the plans were verified by portal dosimetry. Results The dosimetric parameters for the target and normal tissue were consistent in terms of the energy and MU rate. The beam-on time was changed from 59.6 to 6 min for 40 and 600 MU/min. When 40 MU/min was set for the lung, the dose rate delivered to the lung was less than 6 cGy/min (that is, 90%), while the beam-on time was approximately 10 min. The percentage volume of the lung receiving 20 cGy/min was 1.47, 3.94, and 6.22% at 6, 10, and 15 MV, respectively. However, for 600 MU/min, the total lung volume received over 6 cGy/min regardless of the energy, and over 20 cGy/min for 10 and 15 MV (i.e., 54.4% for 6 MV). Conclusions In TMI treatment, reducing the dose rate administered to the lung can decrease the incidence of pulmonary toxicity. To reduce the probability of normal tissue complications, the selection of the lowest MU rate is recommended for fields including the lung. To minimize the total treatment time, the maximum MU rate can be applied to other fields.

Abstract Background To evaluate the modulation indices (MIs) for predicting the plan delivery accuracies of intensity-modulated radiation therapy (IMRT) plans. Methods A total of 100 dynamic IMRT plans that used TrueBeam STx and 102 dynamic IMRT plans that used Trilogy were selected. For each plan, various MIs were calculated, which included the modulation complexity score (MCS), plan-averaged beam area (PA), plan-averaged beam irregularity (PI), plan-averaged beam modulation (PM), MI quantifying multi-leaf collimator (MLC) speeds (MIs), MI quantifying MLC acceleration (MIa), and MI quantifying MLC acceleration and segment aperture irregularity (MIc,IMRT). To determine plan delivery accuracy, global gamma passing rates, MLC errors of log files, and dose-volumetric parameter differences between original and log file-reconstructed IMRT plans were obtained. To assess the ability of each MI for predicting plan delivery accuracy, Spearman’s rank correlation coefficients (r s ) between MIs and plan delivery accuracy measures were calculated. Results PI showed moderately strong correlations with gamma passing rates in MapCHECK2 measurements of both TrueBeam STx and Trilogy (r s = − 0.591 with p

The current study examined the role of family orientations on the achievement motivations (i.e., achievement goal orientations and intrinsic motivation) of high school youths of different generational status (i.e., from immigrant or non-immigrant families) when their perception of their parents’ goals and classroom goal structures were tested simultaneously as predictors. A total of 331 high school students (ninth grade; ages 13–16, with 96% of the students in the ages of 14 or 15; 141 boys and 187 girls) from one high school in the United States participated in the study, completing a series of assessments with regard to their math classes. The findings show the complex role of the family contexts (parent goals and family orientations) on the adaptive mastery goals for children of immigrant families, going beyond previous studies that reported the relationships between family orientation and performance-approach or less adaptive performance-avoidance goals. This study still found that students’ family orientations strongly predicted their desire to win over their peers with certain levels of internal pressure in order to meet their parents’ expectations, aligned with previous literature. Through examining a context beyond the classroom context, studies should continue to examine the larger family and cultural context in understanding students with diverse backgrounds.

We investigated the influence of incorporating tartrazine on the dose response characteristics of radiochromic 3D dosimeters based on polyurethane resin. We use three types of polyurethane resins with different Shore hardness values: 30 A, 50 A, and 80 D. PRESAGE dosimeters are fabricated with different chemical components and concentrations. Tartrazine (Yellow No. 5) helps incorporate a yellow dye to fabricate the dosimeter. Elemental composition is analyzed with the Zeff. Three sets of six different PRESAGE dosimeters were fabricated to investigate the effects of incorporating yellow dye on the dose response characteristics of the dosimeter. The dose response curve was obtained by measuring the optical absorbance using a spectrometer and optical density using optical CT, respectively. The energy and dose rate dependences are evaluated for the dosimeter with the highest sensitivity. For the optical density measurement, significant sensitivity enhancements of 36.6% and 32.7% were achieved in polyurethane having a high Shore hardness of 80 D and 50 A by incorporating tartrazine, respectively. The same results were obtained in the optical absorbance measurements. The ratio of the Zeff of the dosimeter with 80 D Shore hardness to water was 1.49. The polyurethane radiochromic dosimeter with a Shore hardness of 80 D showed the highest sensitivity and energy and dose rate independence upon the incorporation of tartrazine.

PurposeThe aim of this study was to investigate the correlations of the gamma passing rates (GPR) with the dose-volumetric parameter changes between the original volumetric modulated arc therapy (VMAT) plans and the actual deliveries of the VMAT plans (DV errors). We compared the correlations of the TrueBeam STx system to those of a C-series linac.MethodsA total of 20 patients with head and neck (H&N) cancer were retrospectively selected for this study. For each patient, two VMAT plans with the TrueBeam STx and Trilogy (C-series linac) systems were generated under similar modulation degrees. Both the global and local GPRs with various gamma criteria (3%/3 mm, 2%/2 mm, 2%/1 mm, 1%/2 mm, and 1%/1 mm) were acquired with the 2D dose distributions measured using the MapCHECK2 detector array. During VMAT deliveries, the linac log files of the multi-leaf collimator positions, gantry angles, and delivered monitor units were acquired. The DV errors were calculated with the 3D dose distributions reconstructed using the log files. Subsequently, Spearman's rank correlation coefficients (rs) and the corresponding p values were calculated between the GPRs and the DV errors.ResultsFor the Trilogy system, the rs values with p < 0.05 showed weak correlations between the GPRs and the DV errors (rs 0.6) with the GPRs with gamma criteria except 3%/3 mm. As the GPRs increased, the DV errors decreased.ConclusionThe GPRs showed strong correlations with some of the DV errors for the VMAT plans for H&N cancer with the TrueBeam STx system.

Abstract Background We investigate the gamma passing rate (GPR) consistency when applying different types of gamma analyses, linacs, and dosimeters for volumetric modulated arc therapy (VMAT). Methods A total of 240 VMAT plans for various treatment sites, which were generated with Trilogy (140 plans) and TrueBeam STx (100 plans), were retrospectively selected. For each VMAT plan, planar dose distributions were measured with both MapCHECK2 and ArcCHECK dosimeters. During the planar dose distribution measurements, the actual multileaf collimator (MLC) positions, gantry angles, and delivered monitor units were recorded and compared to the values in the original VMAT plans to calculate mechanical errors. For each VMAT plan, both the global and local gamma analyses were performed with 3%/3 mm, 2%/2 mm, 2%/1 mm, 1%/2 mm, and 1%/1 mm. The Pearson correlation coefficients (r) were calculated 1) between the global and the local GPRs, 2) between GPRs with the MapCHECK2 and the ArcCHECK dosimeters, 3) and between GPRs and the mechanical errors during the VMAT delivery. Results For the MapCHECK2 measurements, strong correlations between the global and local GPRs were observed only with 1%/2 mm and 1%/1 mm (r > 0.8 with p 0.05), while the local GPRs showed moderate correlations only with 2%/1 mm and 1%/1 mm for TrueBeam STx (r > 0.5 with p

Abstract Background The demand for dose verification during treatment has risen with the increasing use of intensity-modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) in modern radiation therapy. This study aims to validate the transmission factors of a new transmission detector, the Dolphin online monitoring system (IBA Dosimetry, Schwarzenbruck, Germany), for clinical use. Methods The transmission factors of the Dolphin detector were evaluated using 6 MV, 6 flattening filter free (FFF), 10 MV, and 10 FFF clinical beams from a TrueBeam STx linear accelerator system. Two-dimensional (2D) dose distributions were measured through portal dosimetry with and without Dolphin to derive the transmission factors. The measurements were performed using 10 IMRT and 10 VMAT treatment plans. The transmission factors were calculated using a non-negative least squares problem solver for the 2D dose matrix. Normalized plans were generated using the derived transmission factors. Patient-specific quality assurance with normalized plans was performed using portal dosimetry and an ArcCheck detector to verify the transmission factors. The gamma passing rates were calculated for the 2%/2 mm and 1%/1 mm criteria. Results The transmission factors for the 6 MV, 6 FFF, 10 MV, and 10 FFF beams, were 0.878, 0.824, 0.913, and 0.883, respectively. The average dose difference between the original plan without Dolphin and the normalized plan with Dolphin was less than 1.8% for all measurements. The mean passing rates of the gamma evaluation were 98.1 ± 2.1 and 82.9 ± 12.6 for the 2%/2 mm and 1%/1 mm criteria, respectively, for portal dosimetry of the original plan. In the case of the portal dosimetry of the normalized plan, the mean passing rates of the gamma evaluation were 97.2 ± 2.8 and 79.1 ± 14.8 for the 2%/2 mm and 1%/1 mm criteria, respectively. Conclusions The Dolphin detector can be used for online dosimetry when valid transmission factors are applied to the clinical plan.

Abstract Background The aim of this study was to investigate the dosimetric quality in volumetric modulated arc therapy (VMAT) plans with optimal collimator angles that can represent the outline of multiple brain targets. Methods Twenty patients with multiple target volumes in the brain cases were selected retrospectively. To better represent the outline of the multiple brain targets, four conformal arc plans were generated for each patient using one full arc with four collimator settings. The optimal collimator angles calculated from the integrated multi-leaf collimator (MLC) aperture that had the smallest aperture size for certain collimator settings of the conformal arc plan were selected. VMAT plans with the optimal collimator angles with angular sections of 40° and 60° (Colli-VMAT (40°), Colli-VMAT (60°)) were generated, followed by evaluation of field sizes, dose-volumetric parameters and total monitor units (MUs). Results Patient-averaged values of field sizes for Colli-VMAT (40°) (111.5 cm2) were lowest and 1.3 times smaller than those for Std-VMAT (143.6 cm2). Colli-VMAT plans improved sparing of most normal organs but for brain stem and left parotid gland. For the total MUs, the averaged values obtained with the Colli-VMAT (40°) (390 ± 148 MU) were smaller than those obtained with the Std-VMAT (472 ± 235 MU). Conclusions The Colli-VMAT plans with smaller angular sections could be suitable in the clinic for multiple brain targets as well as for irregularly shaped targets. Determination of the optimal collimator rotation generally showed good normal tissue sparing and MU reduction for multiple brain targets.

Abstract Background To investigate the patterns of post-lumpectomy seroma volume (SV) change and related clinical factors to determine the benefits of adaptive planning in magnetic resonance imaging (MRI)-guided partial breast irradiation (PBI). Methods MRI data obtained from 37 women with early breast cancer acquired at simulation and at the 1st, 6th, and 10th fractions were analyzed. The planning target volume (PTV) was defined as unequal margins of 10–15 mm added according to the directional surgical margin status of each seroma. Treatment was performed using a 0.35 T MRI-guided radiotherapy system. Univariate analysis was performed to assess the correlations between SV change rate and clinical factors. Seroma and PTV for adaptive planning were based on the images obtained at the 6th fraction. Results The average time intervals between surgery-simulation, simulation-1st, 1st-6th, and 6th-10th fractions were 23.1, 8.5, 7.2, and 5.9 days, respectively. Of the 37 patients, 33 exhibited decreased SV over the treatment period. The mean SV of these 33 patients decreased from 100% at simulation to 60, 48, and 40% at each MRI scan. In most cases (26/33), the logarithm of SV was inversely proportional to the elapsed time from surgery (R 2 > 0.90, Pearson’s correlation test). The volume of spared normal tissue from adaptive radiotherapy was proportional to the absolute change in SV (R 2 = 0.89, Pearson’s correlation test). Conclusion Seromas exhibit exponential shrinkage over the course of PBI. In patients receiving PBI, frequent monitoring of SV could be helpful in decision-making regarding adaptive planning, especially those with a large seroma.

To investigate the undesired irradiations outside of the treatment field by electron streams in air (air-electron-stream) during magnetic-resonance image-guided radiation therapy (MR-IGRT). A custom-made support phantom adjusting angles between the beam central axis (CAX) and the phantom surface (termed phantom-angles), were used. Using the ViewRay system, a rectangular parallelepiped phantom placed on the support phantom, was irradiated with field sizes of 6.3 cm × 6.3 cm (FS6.3) and 12.6 cm × 12.6 cm (FS12.6) at gantry angles of 0°, 30°, and 330°, and phantom-angles of 10°, 20°, and 30°. For each beam delivery, the isocenter was located at the center of mass of the phantom and 3 Gy was delivered to the isocenter (prescription dose = 3 Gy). The doses given by the air-electron-streams were measured using the EBT3 films on the panels placed orthogonal to the direction of the magnetic field at distances of 10 and 17 cm from CAX. Two dose distributions per irradiation were measured on the panel facing the phantom surface of the incident beam (front panel) and on the panel facing the phantom surface of the beam exit (end panel). We investigated the doses by the air-electron-streams by calculating the average doses inside the circles drawn around a point of the maximum dose with radii of x cm (DRx) from the dose distributions on the panels (x = 1-5 cm). The largest value of DRx was DR1 (1.64 Gy, 55% of the prescription dose) at 10 cm distance from CAX, with FS12.6, at 30° phantom-angle and 330° gantry angle. The average difference of the DR1 at the end panels (FS12.6) between the calculations and measurements was 1.36 Gy. The average global gamma passing rate with 3%/3 mm on the dose distributions at the end panels (FS12.6) was 40.3%. The calculated dose distributions on both panels were not coincident with the measured dose distributions. The Spearman's rank correlation coefficients between the projected areas and the DRx values were always higher than 0.75 (all with p < 0.001). The doses by the air-electron-streams increased with the projected areas of the cross-sections of the treatment beams on the panels.

PurposeThis study compares the plan quality of magnetic-resonance image (MRI)-based intensity modulated radiation therapy (IMRT) using a linac (MR-linac-IMRT), MRI-based IMRT using tri-Co-60 sources (MR-Co-60-IMRT), and volumetric modulated arc therapy (VMAT) for spine stereotactic ablative radiotherapy (SABR).MethodsTwenty patients with thoracic spine metastasis were retrospectively selected for this study. For each patient, the MR-linac-IMRT, MR-Co-60-IMRT, and VMAT plans were generated using an identical CT image set and structures, except for the spinal cord and spinal cord planning organ-at-risk volume (PRV). Those two structures were contoured based on CT image sets for VMAT planning while those were contoured based on MR image sets for MR-linac-IMRT and MR-Co-60-IMRT planning. The initial prescription doses were 18 Gy in a single fraction for every plan in this study. If the tolerance level of the spinal cord was not met, the prescription doses were reduced to meet the tolerance level of the spinal cord. Dose-volumetric parameters of each plan were analyzed.ResultsThe average spinal cord volumes contoured based on the CT and MR images were 3.8±1.6 cm3 and 1.1±1.0 cm3, respectively (pConclusionMR-linac-IMRT appears promising for spine SABR.

Abstract The pulverization of silicon (Si) anode materials is recognized as a major cause of their poor cycling performance, yet a mechanistic understanding of this degradation from a full cell perspective remains elusive. Here, we identify an overlooked contributor to Si anode failure: mechanical shutdown of separators. Through mechano-structural characterization of Si full cells, combined with digital-twin simulation, we demonstrate that the volume expansion of Si exerts localized compressive stress on commercial polyethylene separators, leading to pore collapse. This structural disruption impairs ion transport across the separator, exacerbating redox nonuniformity and Si pulverization. Compression simulation reveals that a Young’s modulus greater than 1 GPa is required for separators to withstand the volume expansion of Si. To fulfill this requirement, we design a high modulus separator, enabling a high-areal-capacity pouch-type Si full cell to retain 88% capacity after 400 cycles at a fast charge rate of 4.5 mA cm−2.

Abstract Background Accurate measurement of the hip-knee-ankle (HKA) angle is essential for informed clinical decision-making in the management of knee osteoarthritis (OA). Knee OA is commonly associated with varus deformity, where the alignment of the knee shifts medially, leading to increased stress and deterioration of the medial compartment. The HKA angle, which quantifies this alignment, is a critical indicator of the severity of varus deformity and helps guide treatment strategies, including corrective surgeries. Current manual methods are labor-intensive, time-consuming, and prone to inter-observer variability. Developing an automated model for HKA angle measurement is challenging due to the elaborate process of generating handcrafted anatomical landmarks, which is more labor-intensive than the actual measurement. This study aims to develop a ResNet-based deep learning model that predicts the HKA angle without requiring explicit anatomical landmark annotations and to assess its accuracy and efficiency compared to conventional manual methods. Methods We developed a deep learning model based on the variants of the ResNet architecture to process lower limb radiographs and predict HKA angles without explicit landmark annotations. The classification performance for the four stages of varus deformity (stage I: 0°–10°, stage II: 10°–20°, stage III: > 20°, others: genu valgum or normal alignment) was also evaluated. The model was trained and validated using a retrospective cohort of 300 knee OA patients (Kellgren-Lawrence grade 3 or higher), with horizontal flip augmentation applied to double the dataset to 600 samples, followed by fivefold cross-validation. An extended temporal validation was conducted on a separate cohort of 50 knee OA patients. The model's accuracy was assessed by calculating the mean absolute error between predicted and actual HKA angles. Additionally, the classification of varus deformity stages was conducted to evaluate the model's ability to provide clinically relevant categorizations. Time efficiency was compared between the automated model and manual measurements performed by an experienced orthopedic surgeon. Results The ResNet-50 model achieved a bias of − 0.025° with a standard deviation of 1.422° in the retrospective cohort and a bias of − 0.008° with a standard deviation of 1.677° in the temporal validation cohort. Using the ResNet-152 model, it accurately classified the four stages of varus deformity with weighted F1-score of 0.878 and 0.859 in the retrospective and temporal validation cohorts, respectively. The automated model was 126.7 times faster than manual measurements, reducing the total time from 49.8 min to 23.6 sec for the temporal validation cohort. Conclusions The proposed ResNet-based model provides an efficient and accurate method for measuring HKA angles and classifying varus deformity stages without the need for extensive landmark annotations. Its high accuracy and significant improvement in time efficiency make it a valuable tool for clinical practice, potentially enhancing decision-making and workflow efficiency in the management of knee OA.

With the widespread application of online education platforms, the necessity for identifying learners' mental states from webcam videos is increasing as it can be potentially applied to artificial intelligence-based automatic identification of learner states. However, the behaviors that elementary school students frequently exhibit during online learning particularly when they are in a low attention state have rarely been investigated. This study employed electroencephalography (EEG) to continuously track changes in the learner's attention state during online learning. A new EEG index reflecting elementary students' attention level was developed using an EEG dataset acquired from 34th graders during a computerized d2 test of attention. Characteristic behaviors of 24 elementary students in a low attention state were then identified from the webcam videos showing their upper bodies captured during 40-min online lectures, with the proposed EEG index being used as a reference to determine their attention level at the time. Various characteristic behaviors were identified regarding the participant's mouth, head, arms, and torso. For example, opening the mouth or leaning back was observed more frequently in a low-attention state than in a high-attention state. It is expected that the characteristic behaviors reflecting a learner's low attention state would be utilized as a useful reference in developing more interactive and effective online education systems.

PURPOSE:This study aimed to compare the inverse planning simulated annealing (IPSA) stochastic algorithm with the hybrid inverse planning and optimization (HIPO) algorithm for interstitial tongue high-dose-rate (HDR) brachytherapy. METHODS:Twenty patients who received radiotherapy for tongue cancer using interstitial HDR brachytherapy were retrospectively selected for this study. Oncentra Brachy v. 4.3 was used for IPSA and HIPO planning. Four to eight fixed catheter configurations were determined according to the target shape. During the optimization process, predetermined constrain values were used for each IPSA and HIPO plan. The dosimetric parameters and dwell time were analyzed to evaluate the performances of the plans. RESULTS:The total dwell time using IPSA was 4 seconds longer than that of HIPO. The number of active positions per catheter for the IPSA plans were approximately 2.5 fewer than those of the HIPO plans. The dose-volumetric parameters related to the clinical target volume with IPSA were lower than those with HIPO. In terms of the dose-volumetric parameters related to normal tissue, HIPO tended to associate with slightly higher values than IPSA, without statistical significance. After GrO, the target coverages were satisfied to clinical goal for all patients. The total dwell times was approximately increased by 10%. CONCLUSIONS:The IPSA and HIPO dose optimization algorithms generate similar dosimetric results. In terms of the dwell time, HIPO appears to be more beneficial.

Radiation-induced lung damage is an important treatment-related toxicity after lung stereotactic ablative radiotherapy (SABR). After implementing a tri-60Co magnetic-resonance image guided system, ViewRayTM, we compared the associated early radiological lung density changes to those associated with a linear accelerator (LINAC). Eight patients treated with the tri-60Co system were matched 1:1 with patients treated with LINAC. Prescription doses were 52 Gy or 60 Gy in four fractions, and lung dose-volumetric parameters were calculated from each planning system. The first two follow-up computed tomography (CT) were co-registered with the planning CT through deformable registration software, and lung density was measured by isodose levels. Tumor size was matched between the two groups, but the planning target volume of LINAC was larger than that of the tri-60Co system (p = 0.036). With regard to clinically relevant dose-volumetric parameters in the lungs, the ipsilateral lung mean dose, V10Gy and V20Gy were significantly poorer in tri-60Co plans compared to LINAC plans (p = 0.012, 0.036, and 0.017, respectively). Increased lung density was not observed in the first follow-up scan compared to the planning scan. A significant change of lung density was shown in the second follow-up scan and there was no meaningful difference between the tri-60Co system and LINAC for all dose regions. In addition, no patient developed clinical radiation pneumonitis until the second follow-up scan. Therefore, there was no significant difference in the early radiological lung damage between the tri-60Co system and LINAC for lung SABR despite of the inferior plan quality of the tri-60Co system compared to that of LINAC. Further studies with a longer follow-up period are needed to confirm our findings.

[This corrects the article DOI: 10.1371/journal.pone.0195196.].

To investigate the dosimetric characteristics of PRESAGEREU dosimeters.Commercially available PRESAGEREU dosimeters (size of 10 mm × 10 mm × 45 mm) were divided into two groups, with one of the groups placed at room temperature of 22°C (RT group) and another group placed at low temperature of 10°C (LT group). A total of 3 dosimeters (set of dosimeters) were irradiated at a time, with doses of 1 Gy, 2 Gy, 4 Gy, 8 Gy, 12 Gy, 16 Gy, and 20 Gy, at a nominal dose rate of 400 MU/min at temperature of 22°C. The dosimeters were irradiated three additional times by delivering the same doses as those during the initial irradiations (4 irradiation cycles). Optical density (OD) was assessed using optical CT scanning.Considering both linearity and sensitivity of the OD curves, R2 above 0.95 and sensitivity above 0.04 ΔOD/Gy were observed at the 1st irradiation (reading time ≤ 6 h) and 2nd irradiation (reading time = 0.5 h) for the RT group. For the LT group, those values were observed at the 1st irradiation (reading time ≤ 2 h), and the 3rd and 4th irradiations (both reading times = 0.5 h). Considering the reproducibility of signals in response to the same dose, dosimeters in the RT group showed average deviations among dosimeters less than 5% (the 1st and 2nd irradiations at the reading time of 0.5 h), while for dosimeters in the LT group showed average deviations among dosimeters less than 6% (the 3rd and 4th irradiations at the reading time of 0.5 h). For the rest, the OD curves were not linear, sensitivities of the dosimeters were lower than 0.04 ΔOD/Gy, and OD deviations at the same dose were larger than 6%.At room temperature, PRESAGEREU dosimeters could be used for dose measurement only for up to two dose measurement sessions. At low temperatures, usage of PRESAGEREU dosimeters for dose measurement seems to be possible from the 3rd irradiation. When reusing PRESAGEREU dosimeters, the OD curve should be re-defined for every measurement session because the shape of this curve depends on the irradiation history.

This study investigated the potential of a newly proposed scattering foil free (SFF) electron beam scanning technique for the treatment of skin cancer on the irregular patient surfaces using Monte Carlo (MC) simulation. After benchmarking of the MC simulations, we removed the scattering foil to generate SFF electron beams. Cylindrical and spherical phantoms with 1 cm boluses were generated and the target volume was defined from the surface to 5 mm depth. The SFF scanning technique with 6 MeV electrons was simulated using those phantoms. For comparison, volumetric modulated arc therapy (VMAT) plans were also generated with two full arcs and 6 MV photon beams. When the scanning resolution resulted in a larger separation between beams than the field size, the plan qualities were worsened. In the cylindrical phantom with a radius of 10 cm, the conformity indices, homogeneity indices and body mean doses of the SFF plans (scanning resolution = 1°) vs. VMAT plans were 1.04 vs. 1.54, 1.10 vs. 1.12 and 5 Gy vs. 14 Gy, respectively. Those of the spherical phantom were 1.04 vs. 1.83, 1.08 vs. 1.09 and 7 Gy vs. 26 Gy, respectively. The proposed SFF plans showed superior dose distributions compared to the VMAT plans.

To calculate an optimal collimator angle at each of sectional arcs in a full-arc volumetric modulated arc therapy (VMAT) plan and evaluate dosimetric quality of these VMAT plans comparing full-arc VMAT plans with a fixed collimator angle.Seventeen patients who had irregularly-shaped target in abdominal, head and neck, and chest cases were selected retrospectively. To calculate an optimal collimator angle at each of sectional arcs in VMAT, integrated MLC apertures which could cover all shapes of target determined by beam's-eye view (BEV) within angular sections were obtained for each VMAT plan. The angular sections were 40°, 60°, 90° and 120°. When the collimator settings were rotated at intervals of 2°, we obtained the optimal collimator angle to minimize area size difference between the integrated MLC aperture and collimator settings with 5 mm-margins to the integrated MLC aperture. The VMAT plans with the optimal collimator angles (Colli-VMAT) were generated in the EclipseTM. For comparison purposes, one full-arc VMAT plans with a fixed collimator angles (Std-VMAT) were generated. The dose-volumetric parameters and total MUs were evaluated.The mean dose-volumetric parameters for target volume of Colli-VMAT were comparable to Std-VMAT. Colli-VMAT improved sparing of most normal organs but for brain stem, compared to Std-VMAT for all cases. There were decreasing tendencies in mean total MUs with decreasing angular section. The mean total MUs for Colli-VMAT with the angular section of 40° (434 ± 95 MU, 317 ± 81 MU, and 371 ± 43 MU for abdominal, head and neck, and chest cases, respectively) were lower than those for Std-VMAT (654 ± 182 MU, 517 ± 116 MU, and 533 ± 25 MU, respectively).For an irregularly-shaped target, Colli-VMAT with the angular section of 40° reduced total MUs and improved sparing of normal organs, compared to Std-VMAT.

Abstract We study the (ambi-)twistor model for spinning particles interacting via electromagnetic field, as a toy model for studying classical dynamics of gravitating bodies including effects of both spins to all orders. We compute the momentum kick and spin kick up to one-loop order and show precisely how they are encoded in the classical eikonal. The all-orders-in-spin effects are encoded as a dynamical implementation of the Newman-Janis shift, and we find that the expansion in both spins can be resummed to simple expressions in special kinematic configurations, at least up to one-loop order. We confirm that the classical eikonal can be understood as the generator of canonical transformations that map the in-states of a scattering process to the out-states. We also remark that cut contributions for converting worldline propagators from time-symmetric to retarded amount to the iterated action of the leading eikonal at one-loop order.

The aim of this study was to assess the feasibility and advantages of a patient-specific breast bolus made using a 3D printer technique.We used the anthropomorphic female phantom with breast attachments, which volumes are 200, 300, 400, 500 and 650 cc. We simulated the treatment for a right breast patient using parallel opposed tangential fields. Treatment plans were used to investigate the effect of unwanted air gaps under bolus on the dose distribution of the whole breast. The commercial Super-Flex bolus and 3D-printed polylactic acid (PLA) bolus were applied to investigate the skin dose of the breast with the MOSFET measurement. Two boluses of 3 and 5 mm thicknesses were selected.There was a good agreement between the dose distribution for a virtual bolus generated by the TPS and PLA bolus. The difference in dose distribution between the virtual bolus and Super-Flex bolus was significant within the bolus and breast due to unwanted air gaps. The average differences between calculated and measured doses in a 200 and 300 cc with PLA bolus were not significant, which were -0.7% and -0.6% for 3mm, and -1.1% and -1.1% for 5 mm, respectively. With the Super-Flex bolus, however, significant dose differences were observed (-5.1% and -3.2% for 3mm, and -6.3% and -4.2% for 5 mm).The 3D-printed solid bolus can reduce the uncertainty of the daily setup and help to overcome the dose discrepancy by unwanted air gaps in the breast cancer radiation therapy.