Search

Fairness constitutes a cornerstone of social norms, emphasizing equal treatment and equitable distribution in interpersonal relationships. Unfair treatment often leads to direct responses and can spread to others through a phenomenon known as pay-it-forward (PIF) reciprocity. This study examined how unfairness spreads in interactions with new partners who have higher, equal, or lower status than the participants. In the present study, participants (N = 47, all Korean) were given either fair or unfair treatment in the first round of a dictator game. They then allocated monetary resources among partners positioned at various hierarchical levels in the second round. Our main goal was to determine if the severity of inequity inflicted on new partners was influenced by their hierarchical status. The results revealed an inclination among participants to act more generously towards partners of higher ranking despite prior instances of unfair treatment, whereas a tendency for harsher treatment was directed towards those with lower ranking. The interaction between the fairness in the first round (DG1) and the hierarchical status of the partner in the second round (DG2) was significant, indicating that the effect of previous fairness on decision-making differed depending on the ranking of the new partners. This study, therefore, validates the presence of unfairness PIF reciprocity within hierarchical contexts.

Abstract Background The recent rising health spending intrigued efficiency and cost-based performance measures. However, mortality risk adjustment methods are still under consideration in cost estimation, though methods specific to cost estimate have been developed. Therefore, we aimed to compare the performance of diagnosis-based risk adjustment methods based on the episode-based cost to utilize in efficiency measurement. Methods We used the Health Insurance Review and Assessment Service–National Patient Sample as the data source. A separate linear regression model was constructed within each Major Diagnostic Category (MDC). Individual models included explanatory (demographics, insurance type, institutional type, Adjacent Diagnosis Related Group [ADRG], diagnosis-based risk adjustment methods) and response variables (episode-based costs). The following risk adjustment methods were used: Refined Diagnosis Related Group (RDRG), Charlson Comorbidity Index (CCI), National Health Insurance Service Hierarchical Condition Categories (NHIS-HCC), and Department of Health and Human Service-HCC (HHS-HCC). The model accuracy was compared using R-squared (R2), mean absolute error, and predictive ratio. For external validity, we used the 2017 dataset. Results The model including RDRG improved the mean adjusted R2 from 40.8% to 45.8% compared to the adjacent DRG. RDRG was inferior to both HCCs (RDRG adjusted R2 45.8%, NHIS-HCC adjusted R2 46.3%, HHS-HCC adjusted R2 45.9%) but superior to CCI (adjusted R2 42.7%). Model performance varied depending on the MDC groups. While both HCCs had the highest explanatory power in 12 MDCs, including MDC P (Newborns), RDRG showed the highest adjusted R2 in 6 MDCs, such as MDC O (pregnancy, childbirth, and puerperium). The overall mean absolute errors were the lowest in the model with RDRG ($1,099). The predictive ratios showed similar patterns among the models regardless of the subgroups according to age, sex, insurance type, institutional type, and the upper and lower 10th percentiles of actual costs. External validity also showed a similar pattern in the model performance. Conclusions Our research showed that either NHIS-HCC or HHS-HCC can be useful in adjusting comorbidities for episode-based costs in the process of efficiency measurement.

Automakers are focusing on lightweight vehicles to address fuel economy and emission challenges and are using high-performance materials such as 2K PU-based joints as alternatives to cast iron, steel, and other metals. This study was conducted with the aim of expanding the application of 2K PU and enhancing its compatibility with steel substrates, which are commonly used in the automotive manufacturing industry, through the use of O-I hybrid nanoparticles containing alkoxysilane groups as additives in the 2K PU formulation. At the same time, the simplified process introduced and examined in this study demonstrates its feasibility for industrial-scale applications; the process offers notable advantages in reducing workload and curing time by eliminating cumbersome surface pretreatment steps before applying the 2K PU layer. Two types of commercial SB PU and EB PU were selected to study the mechanism by which O-I hybrid NPs enhance adhesion when integrated directly into the 2K PU formulation. We optimized various input parameters through practical work and modeling using the response surface method. These parameters included the amounts of AFAP precursor, APTES, and butylene glycol (BG) and the mixing ratio of O-I hybrid NPs in the formulations of two commercial PUs. The results show that O-I hybrid NPs significantly enhance adhesion, increasing performance on stainless surfaces by up to 2.35 times compared to pristine EB and SB PU. Notably, the SB PU’s performance can improve up to 2.5 times according to the RSM predictions, highlighting the substantial impact of O-I hybrid NPs.

Efficient spatial query processing in Graph Database Management Systems (GDBMSs) has become increasingly important owing to the prevalence of spatial graph data. However, current GDBMSs lack effective spatial indexing, causing performance issues with complex spatial graph queries. This study proposes a spatial index called Subgraph Integrated R-Tree (SGIR-Tree) for efficient spatial query processing in GDBMSs. The SGIR-Tree integrates the hierarchical R-Tree structure with the graph structure of GDBMSs by converting R-Tree elements into graph components like nodes and edges. The Minimum Bounding Rectangle (MBR) information of spatial objects and R-Tree nodes is stored as properties of these graph elements, and the leaf nodes are directly connected to the spatial nodes. This approach combines the efficiency of spatial indexing with the flexibility of graph databases, thereby allowing spatial query results to be directly utilized in graph traversal. Experiments using OpenStreetMap datasets demonstrate that the SGIR-Tree outperforms the previous approaches in terms of query overhead and index overhead. The results are expected to improve spatial graph data processing in various fields, including location-based service and urban planning, significantly advancing spatial data management in GDBMSs.

Cannabis (Cannabis sativa) is a versatile crop belonging to the Cannabaceae family, and is dioecious, typically with separate male and female plants. The flowers of female plants, especially the trichomes, accumulate relatively higher contents of cannabinoids compared with those of male plants. For this reason, to obtain seeds that are genetically female, it is desirable to induce the development of male flowers on a female plant that produces genetically female haploid gametes. Silver thiosulfate (STS) is a highly effective chemical for male flower induction. We investigated male flower induction in three commercial cultivars of female cannabis (Spectrum303, SuperwomanS1, and CBGambit) regarding the treatment frequency, stage of application, and concentration of STS applied as a foliar spray. All three cultivars showed adequate induction of male flowers in response to 1.5 mM STS applied at the early reproductive stage. In particular, SuperwomanS1 was most highly responsive to induction of male flowers, even when treated with 0.3 mM STS at the early reproductive stage. Treatment with three applications of STS was more effective compared with a single application, but a single application of 1.5 mM STS at the early reproductive stage was sufficient for male flower induction. A single STS application during the middle stage of reproductive growth was inadequate for induction of male flowers. However, 6 weeks after three applications of STS, CBGambit exhibited approximately 54% male flower induction at 0.3 mM STS, Spectrum303 showed approximately 56% induction at 3 mM STS, and SuperwomanS1 yielded approximately 26% induction at 1.5 mM (expressed as percentage of total number of individuals with the induced male flowers). Pollen stainability tests using KI-I2 solution and Alexander’s staining showed high pollen viability with over 65% at different single STS concentrations, indicating that pollen grains induced by STS have sufficient viability for the self-pollination. This study demonstrated that different cultivars of cannabis respond diversely to different STS concentrations and highlighted the potential benefits of three STS applications during the middle reproductive stage for cannabis breeding.

Introduction: In 2019, mild vestibular function deficiency in elder populations was defined as presbyvestibulopathy (PVP) by the Classification Committee of the Bárány Society. The diagnostic criteria include tests for low-, mid-, and high-frequency vestibular function, represented by caloric testing, rotary chair testing, and head impulse testing, respectively. However, there is still a lack of large-scale reports supporting the relationship between vestibular function tests (VFTs) and aging. In this study, we evaluated whether each test is correlated with aging in the elderly population aged over 50. Methods: This study retrospectively enrolled 1043 subjects from a single university hospital database after excluding those with unilateral and bilateral vestibulopathy, central dizziness, and acute dizziness. Enrolled subjects had caloric canal paresis 0.6, vHIT interaural difference 50 years old. Results: Significant negative correlations with age were identified in the vHIT (p < 0.001) and rotary chair test (RCT) 1.0 Hz gain (p = 0.030). However, the caloric test (p = 0.739 and 0.745 on the left and right sides, respectively) and RCT 0.12 Hz gain (p = 0.298) did not show a significant correlation with age. A total of 4.83% of subjects aged 70 years or older showed sub-normal vHIT gain that met the criteria of PVP, whereas only 0.50% of subjects aged 60 to 69 did. The prevalence of sub-normal caloric test results, however, was not significantly different between the two age groups (21.55% in the 60–69 age group and 26.59% in the >70 age group). Conclusions: The high-frequency range vestibular function seems vulnerable to aging, and this is more discernible at age >70 years. The weak correlation between age and low-frequency vestibular function tests, such as the caloric test and low-frequency rotary chair testing, suggests the need to revisit the diagnostic criteria for PVP.

Rapeseed (Brassica napus L.) holds significant commercial value as one of the leading oil crops, with its agronomic features and oil quality being crucial determinants. In this investigation, 73,226 single nucleotide polymorphisms (SNPs) across 95 rapeseed mutant lines induced by gamma rays, alongside the original cultivar (‘Tamra’), using genotyping-by-sequencing (GBS) analysis were examined. This study encompassed gene ontology (GO) analysis and a genomewide association study (GWAS), thereby concentrating on agronomic traits (e.g., plant height, ear length, thousand-seed weight, and seed yield) and oil traits (including fatty acid composition and crude fat content). The GO analysis unveiled a multitude of genes with SNP variations associated with cellular processes, intracellular anatomical structures, and organic cyclic compound binding. Through GWAS, we detected 320 significant SNPs linked to both agronomic (104 SNPs) and oil traits (216 SNPs). Notably, two novel candidate genes, Bna.A05p02350D (SFGH) and Bna.C02p22490D (MDN1), are implicated in thousand-seed weight regulation. Additionally, Bna.C03p14350D (EXO70) and Bna.A09p05630D (PI4Kα1) emerged as novel candidate genes associated with erucic acid and crude fat content, respectively. These findings carry implications for identifying superior genotypes for the development of new cultivars. Association studies offer a cost-effective means of screening mutants and selecting elite rapeseed breeding lines, thereby enhancing the commercial viability of this pivotal oil crop.

Abstract Background Combined maternal and postnatal high-fat (HF) diet intake predisposes offspring to metabolic dysregulation during adulthood. As the inhibitory effects of leucine consumption on obesity and metabolic disorders have been reported, the effects of maternal leucine supplementation on metabolic dysregulation in adult offspring were investigated. Methods Female mice were exposed to a control (C) or HF diet, with or without leucine (L) supplementation (1.5%, w/v), 3 weeks before mating, during pregnancy, and during lactation (C, CL, HF, and HFL). Male offspring were exposed to an HF diet for 12 weeks after weaning (C/HF, CL/HF, HF/HF, and HFL/HF). Serum biochemical parameters were determined for both the dams and offspring. Oral glucose tolerance test and qRT-PCR analysis were used to investigate metabolic dysregulation in the offspring. Results HFL dams exhibited higher relative adipose tissue weights than HF dams. Body weight, relative adipose tissue weight, and serum glucose levels were lower in the HFL/HF offspring than in the HF/HF offspring. Maternal leucine supplementation tended to alleviate glucose intolerance in the offspring of HF diet-fed dams. Additionally, mRNA levels of fibroblast growth factor 21 (FGF21), a hepatokine associated with glucose homeostasis, were higher in HFL/HF offspring than in HF/HF offspring and were negatively correlated with adiposity and serum glucose levels. The mRNA levels of genes encoding a FGF21 receptor complex, Fgf receptor 1 and klotho β, and its downstream targets, proliferator‐activated receptor‐γ co‐activator 1α and sirtuin 1, were higher in adipose tissues of the HFL/HF offspring than in those of the HF/HF offspring. Serum lipid peroxide levels were lower in HFL dams than in HF dams and positively correlated with body and adipose tissue weights of offspring. Conclusions Leucine supplementation in HF diet-fed dams, but not in control diet-fed dams, resulted in an anti-obesity phenotype accompanied by glucose homeostasis in male offspring challenged with postnatal HF feeding. Activation of FGF21 signaling in the adipose tissue of offspring may be responsible for these beneficial effects of leucine.

Organic–inorganic hybrid dielectric nanomaterials are vital for OTFT applications due to their unique combination of organic dielectric and inorganic properties. Despite the challenges in preparing stable titania (TiO2) nanoparticles, we successfully synthesized colloidally stable organic–inorganic (O-I) TiO2 hybrid nanoparticles using an amphiphilic polymer as a stabilizer through a low-temperature sol–gel process. The resulting O-I TiO2 hybrid sols exhibited long-term stability and formed a high-quality dielectric layer with a high dielectric constant (κ) and minimal leakage current density. We also addressed the effect of the ethylene oxide chain within the hydrophilic segment of the amphiphilic polymer on the dielectric properties of the coating film derived from O-I TiO2 hybrid sols. Using the O-I TiO2 hybrid dielectric layer with excellent insulating properties enhanced the electrical performance of the gate dielectrics, including superior field-effect mobility and stable operation in OTFT devices. We believe that this study provides a reliable method for the preparation of O-I hybrid TiO2 dielectric materials designed to enhance the operational stability and electrical performance of OTFTs.

Owing to new security threats and relevant changes in network computing environments, key exchange methods that replace conventional public key exchange algorithms are being researched. The neural cryptography-based key exchange algorithm proposed recently uses neural synchronization as an alternative to public-key methods. However, the learning-based synchronization method uses considerable communication resources to generate output values and share the results. The efficiency of this method depends on the type of algorithm and is affected by both the communication rounds for exchanging output values and the number of weight learning rounds. To improve its efficiency, this paper proposes 1-h random walk and batch scheme methods and verifies their efficiency and security.

The high-speed single-molecule miRNA detection technique dynamic FRET-FISH shows increased detection speed and high target specificity, detecting a single miRNA in ten seconds.

We propose a vision-based fall detection algorithm using advanced deep learning models and fusion methods for smart safety management systems. By detecting falls through visual cues, it is possible to leverage existing surveillance cameras, thus minimizing the need for extensive additional equipment. Consequently, we developed a cost-effective fall detection system. The proposed system consists of four modules: object detection, pose estimation, action recognition, and result fusion. Constructing the fall detection system involved the utilization of state-of-the-art (SOTA) models. In the fusion module, we experimented with various approaches, including voting, maximum, averaging, and probabilistic fusion. Notably, we observed a significant performance improvement with the use of probabilistic fusion. We employed the HAR-UP dataset to demonstrate this enhancement, achieving an average 0.84% increase in accuracy compared to the baseline, which did not incorporate fusion methods. By applying our proposed time-level ensemble and skeleton-based fall detection approach, coupled with the use of enhanced object detection and pose estimation modules, we substantially improved the robustness and accuracy of the system, particularly for fall detection in challenging scenarios.

Objectives This study assessed the validity and reliability of the Health-related Quality of Life Instrument with 8 Items (HINT-8) in patients with diabetes. HINT-8 is a newly-developed, generic health-related quality of life (HRQoL) instrument. Methods Three HRQoL instruments—HINT-8, EuroQoL 5-Dimension 5-Level (EQ-5D-5L), and Short Form Health Survey version 2.0 (SF-36v2)—were provided to 300 patients with diabetes visiting a tertiary hospital for follow-up visits in Korea. The HRQoL scores obtained using the HINT-8 were evaluated for subgroups with known differences based on demographics and diabetes-related characteristics (known-group validity). The mean scores of the instruments were compared between groups segmented by their responses to the HINT-8 (discriminatory ability). Correlation coefficients of the HINT-8 with other instruments were calculated (convergent and divergent validity). The Cohen kappa and intra-class correlation coefficient (ICC) were also evaluated (test-retest reliability). Results The average HINT-8 indexes were lower among women, older, and less-educated subjects. Subjects who did not list any problems on the HINT-8 had significantly higher HRQoL scores than those who did. The correlation coefficients of the HINT-8 with the EQ-5D-5L index and EuroQoL visual analogue scale were 0.715 (p

The concentration of phenolic compounds in rapeseed is important because they are either anti-nutritional compounds or directly related to antioxidant activity. In this study, single nucleotide polymorphisms (SNPs) were identified using genotyping-by-sequencing (GBS), and an association study was conducted to investigate phenolic content in 95 rapeseed mutant lines derived from gamma rays and their original cultivar. A total of 3,196,318 SNPs were detected, resulting in the identification of a set of 70,208 union SNPs used to perform association studies. Seven compounds were identified, sinapine being the major phenolic compound (91.2–99.2%) in all genotypes. An association study was conducted for seven compounds and total phenolic content (TPC). It identified 241 SNPs that were significantly associated with these compounds, total sinapine content (TSC), and TPC. Based on the SNP markers detected, BnaC02g20420D was associated with dihexose, BnaC08g30570D with progoitrin, BnaA01g06890D with methyl sinapate, BnaA09g16810D with sinapine(4-O-8′)guaiacyl, BnaCnng39930D with trans-sinapine 1, BnaA07g31720D with trans-sinapine 2, BnaC03g31950D with sinapoyl malate, and BnaAnng27700D with TPC. These were selected as candidate genes that may play a key role in rapeseed. The SNP markers associated with these key phenolic compounds can be used as targets in breeding programs to reduce anti-nutritional components.

We studied the influence of the ethylenediaminetetraacetic acid (EDTA) content used as combustion fuel when fabricating nickel oxide (NiO) nanocatalysts via solution combustion synthesis, as well as the growth behavior of carbon nanotubes (CNTs) using this catalyst. Nickel nitrate hexahydrate (Ni(NO3)2∙6H2O) was used as the metal precursor (an oxidizer), and the catalysts were synthesized by adjusting the molar ratio of fuel (EDTA) to oxidizer in the range of 1:0.25 to 2.0. The results of the crystal structure analysis showed that as the EDTA content increased beyond the chemical stoichiometric balance with Ni(NO3)2∙6H2O (F/O = 0.25), the proportion of Ni metal within the catalyst particles decreased, and only single-phase NiO was observed. Among the synthesized catalysts, the smallest crystallite size was observed with a 1:1 ratio of Ni ions to EDTA. However, an increase in the amount of EDTA resulted in excessive fuel supply, leading to an increase in crystallite size. Microstructure analysis revealed porous NiO agglomerates due to the use of EDTA, and differences in particle growth based on the fuel ratio were observed. We analyzed the growth behavior of CNTs grown using NiO nanocatalysts through catalytic chemical vapor deposition (CCVD). As the F/O ratio increased, it was observed that the catalyst particles grew excessively beyond hundreds of nanometers, preventing further CNT growth and leading to a rapid termination of CNT growth. Raman spectroscopy was used to analyze the structural characteristics of CNTs, and it was found that the ID/IG ratio indicated the highest CNT crystallinity near an F/O ratio of 1:1.

The effects of CaO content and post-heat treatment were investigated on the phase stability and mechanical and thermal properties of Ca-PSZ. ZrO2 specimens with 5–10 mol% CaO were sintered, and post-heat treatment was performed at 1200 °C for 100 h. Subsequently, to test and analyze the crystal structure and the microstructure, the mechanical and thermal properties of the specimens were evaluated. All specimens were partially stabilized by 5–10 mol% CaO (5CSZ–10CSZ) in a mixed monoclinic and tetragonal phase; however, peaks of the secondary phase of CaZrO3 were observed in 10CSZ. The ratio of the monoclinic phase decreased from 62.50% (5CSZ) to 21.02% (10CSZ) as the CaO content increased. Additionally, the monoclinic phase ratio decreased from 59.38% (5CSZ) to 19.57% (9CSZ) after the post-heat treatment; an increase to 24.84% was observed for 10CSZ. An increase in Vickers hardness from 676.02 to 1256.25 HV and flexural strength from 437.7 to 842.7 MPa was observed with increasing CaO content. The post-heat treatment resulted in further increases in these values as the CaO content increased from 5CSZ to 9CSZ; however, the Vickers hardness and flexural strength of 10CSZ decreased by approximately 8% and 9%, respectively. The thermal expansion coefficient exhibited the same tendency as the mechanical properties. This coefficient increased from 8.229 × 10−6 to 9.448 × 10−6 K−1 with increasing CaO content and was enhanced after the post-heat treatment in 5CSZ to 9CSZ; however, the thermal expansion coefficient of 10CSZ decreased by approximately 4% after the post-heat treatment. The mechanically and thermally stable tetragonal phase increased, and the monoclinic phase decreased as the doped Ca replaced the Zr sites, as was confirmed by the X-ray diffraction (XRD) analysis. The post-heat treatment and the increased Ca addition further facilitated the replacement of Zr sites by Ca. However, at high Ca concentrations of 10CSZ, an equilibrium phase of CaZrO3 was formed as a secondary phase at the post-heat treatment temperature, resulting in low performance.

Objectives This study evaluated the validity and reliability of the Health-Related Quality of Life Instrument with 8 Items (HINT-8) in postoperative breast cancer patients in South Korea. Methods The study included 300 breast cancer patients visiting a tertiary hospital. We measured health-related quality of life (HRQoL) using the HINT-8, the 5-level EQ-5D version (EQ-5D-5L), and the Functional Assessment of Cancer Therapy-Breast (FACT-B). Discriminatory ability, known-group validity, and convergent validity were assessed. Reliability was evaluated with the Cohen kappa, weighted kappa, and intraclass correlation coefficient (ICC). Results The EQ-5D-5L indexes (p

Background: A job-exposure matrix (JEM) is an important surrogate indicator to evaluate past exposure levels. Although a Korean asbestos JEM has been constructed previously, this JEM includes only a few industrial and occupational groups. This study aimed to reconstruct the JEM by integrating the latest organized data to improve its utility. Methods: We used recent Korean standard industry and occupation codes and extracted 36 articles from a systematic literature review to initiate the reconstruction of the previous Korean asbestos JEM. The resulting data consisted of 141 combinations of industrial and occupational groups. Data from the Netherlands's JEM were also reviewed and categorized into 70 industrial and 117 occupational groups by matching with the Korean data. We also utilized Germany's data, which consisted of 10 industrial and 14 occupational groups. Results: The reconstructed Korean asbestos JEM had 141 combinations of industries and occupations. The time periods are from the 1980s to the 2000s in 10-year intervals. Most of the data were distributed between the 1990s and the 2000s. Occupations with high exposure to asbestos included knitting and weaving machine operators, automobile mechanics or assemblers, ship mechanics or assemblers, mineral ore and stone products processing mechanics, and metal casting machine operators or mold makers. Conclusions: The reconstructed Korean asbestos JEM has expanded the type and duration of the occupational groups of the previous JEM and can serve as an important reference tool for evaluating asbestos exposure and designing compensation and prevention policies in Korea.

Sorghum (Sorghum bicolor L.) is a promising biomass crop with high yields of cellulose, hemicellulose, and lignin. Sorghum biomass has emerged as an eco-friendly industrial material useful for producing biofuels and bioplastics. This study conducted genotyping-by-sequencing (GBS)-based genome-wide association studies (GWAS) to establish the genetic basis of traits associated with biomass. Specifically, the researchers evaluated agronomic traits and phenolic compounds using 96 sorghum genotypes. Six phenolic compounds, luteolinidin diglucoside, luteolin glucoside, apigeninidin glucoside, luteolinidin, apigeninidin, and 5-O-Me luteolinidin, were found to be the major phenolic compounds in all genotypes. Out of our six detected phenolic compounds (luteolinidin diglucoside, luteolin glucoside, apigeninidin glucoside, luteolinidin, apigeninidin, and 5-O-Me luteolinidin), luteolinidin was the major phenolic compound in all genotypes. Next, a GWAS analysis was performed to confirm significant associations between 192,040 filtered single-nucleotide polymorphisms (SNPs) and biomass-related traits. The study identified 40 SNPs on 10 chromosomes that were significantly associated with heading date (4 SNPs), plant height (3 SNPs), dry yield (2 SNPs), and phenolic compounds (31 SNPs). The GWAS analysis showed that SbRio.10G099600 (FUT1) was associated with heading date, SbRio.09G149200 with plant height, SbRio.06G211400 (MAFB) with dry yield, SbRio.04G259800 (PDHA1) with total phenolic content and luteolinidin diglucoside, and SbRio.02G343600 (LeETR4) with total phenolic content and luteolinidin, suggesting that these genes could play key roles in sorghum. These findings demonstrate the potential value of sorghum as a biomass resource and the potential for selecting sorghum genotypes with reduced phenolic contents for use in the bioindustry.

Abstract Pancreatitis is the inflammation of the pancreas. However, little is known about the genes associated with pancreatitis severity. Our microarray analysis of pancreatic tissues from mild and severe acute pancreatitis mice models identified angiopoietin‐like 4 (ANGPTL4) as one of the most significantly upregulated genes. Clinically, ANGPTL4 expression was also increased in the serum and pancreatic tissues of pancreatitis patients. The deficiency in ANGPTL4 in mice, either by gene deletion or neutralizing antibody, mitigated pancreatitis‐associated pathological outcomes. Conversely, exogenous ANGPTL4 exacerbated pancreatic injury with elevated cytokine levels and apoptotic cell death. High ANGPTL4 enhanced macrophage activation and infiltration into the pancreas, which increased complement component 5a (C5a) level through PI3K/AKT signaling. The activation of the C5a receptor led to hypercytokinemia that accelerated acinar cell damage and furthered pancreatitis. Indeed, C5a neutralizing antibody decreased inflammatory response in LPS‐activated macrophages and alleviated pancreatitis severity. In agreement, there was a significant positive correlation between C5a and ANGPTL4 levels in pancreatitis patients. Taken together, our study suggests that targeting ANGPTL4 is a potential strategy for the treatment of pancreatitis.

This study introduces synthetic methodology to develop hydrophobic surfaces. Hydrophobic surfaces are fabricated via cross-linking of inorganic-organic hybrids, prepared from dipodal alkoxysilane-functionalized urethane precursors (AFUS). The inorganic-organic (I-O) hybrids are synthesized by co-hydrolysis and co-condensation of various precursors. The hybrid solutions are then used to fabricate hydrophobic coatings through spin coating method. The coatings exhibited water contact angle greater than 90°. The properties of the hydrophobic coatings are analysed and characterized using scanning electron microscopy (SEM) and contact angle measurement (CA). The precursors are characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric-differential thermal analysis (TG-DTA) and gel permeation chromatography (GPC). These environment-friendly inorganic-organic hybrid coatings have shown great potential in replacing the toxic fluorinated alkylsilane based coatings.

Anemia is the most prevalent nutrition-related disorder worldwide. Zinc is an essential trace element for various biological processes in the body, and zinc deficiency has been associated with anemia in humans. However, the molecular mechanisms by which zinc availability alters red blood cell development remain uncertain. The present study identifies the essentiality of zinc during erythroid development, particularly for normal heme biosynthesis. G1E-ER4 mouse cells were used as an in vitro model of terminal erythroid differentiation, which featured elevated cellular zinc content by development. Restriction of zinc import compromised the rate of heme and α-globin production and, thus, the hemoglobinization of the erythroid progenitors. Heme is synthesized by the incorporation of iron into protoporphyrin. The lower heme production under zinc restriction was not due to changes in iron but was attributable to less porphyrin synthesis. The requirement of adequate zinc for erythroid heme metabolism was confirmed in another erythropoietic cell model, MEL-DS19. Additionally, we found that a conventional marker of iron deficiency anemia, the ZnPP-to-heme ratio, responded to zinc restriction differently from iron deficiency. Collectively, our findings define zinc as an essential nutrient integral to erythroid heme biosynthesis and, thus, a potential therapeutic target for treating anemia and other erythrocyte-related disorders.

Macrophages, via erythrophagocytosis, recycle iron from effete erythrocytes to newly developing red blood cells. Conversion of potentially cytotoxic levels of iron from its heme into nonheme form during iron recycling is safely accomplished via coordinated regulations of cellular iron transport and homeostasis. Herein, we demonstrate the roles and regulation of NCOA4 (nuclear receptor coactivator 4)-mediated ferritinophagy in macrophages after erythrophagocytosis using the mouse macrophage cell line J774 cells. Ferritin in J774 cells increased with the rise of nonheme iron by erythrocyte ingestion and declined when total cellular iron contents subsequently decreased. NCOA4, a selective autophagic cargo receptor for ferritin, was responsible for the control of cellular ferritin and total iron contents at the later stage of erythrophagocytosis. A hepcidin analog, which limits the flux of iron through iron-recycling by inhibiting iron export at the plasma membrane, repressed NCOA4 expression and led to accumulation of ferritin in the mouse macrophages. Transcriptome analyses revealed a functional association of immune response with NCOA4-dependent gene expressions, and we confirmed repression of Ncoa4 by lipopolysaccharide (LPS) in J774 cells and the spleen of mice. Collectively, our studies indicate that NCOA4 facilitates cellular ferritin turnover and the release of iron by macrophages after erythrophagocytosis and functions as a regulatory target for molecular signals of systemic iron overload and inflammation. These identify macrophage NCOA4 as a potential therapeutic target for disorders of systemic iron dysregulation, including anemia of inflammation and hemochromatosis.

The phase formation and stabilization behaviors of calcia partially stabilized zirconia (Ca-PSZ) were investigated with regard to the CaO content and post-heat treatment. Sintered specimens were prepared by adding 2, 3, 4, and 5 mol% to CaO to ZrO2, and post-heat treatment were conducted. In the X-ray diffraction pattern, the monoclinic peak decreased, the tetragonal peak increased upon CaO doping, and no CaZrO3 peak was observed. Transmission electron microscopy images of the Ca-PSZ showed that the d-spacing of 4CSZ (200)m extended from 0.260 nm to 0.266 nm subsequent to post-heat treatment. The coefficient of thermal expansion gradually increased in accordance with the dopant concentration, in addition, it increased even after the post-heat treatment. These results are related to the increase in tetragonal phase, which has a relatively higher coefficient of thermal expansion than that of the monoclinc phase. According to the Vickers hardness measurement, the hardness of all specimens increased gradually as the concentration of CaO increased, and the hardness of the 5CSZ was improved from 676 to 774 Hv by the post-heat treatment.

Why would people conform more to others with higher social positions? People may place higher confidence in the opinions of those who rank higher in the social hierarchy, or they may wish to make better impressions on people of higher social status. We investigated how individual preferences for novel stimuli are influenced by the preferences of others in the social hierarchy and whether anonymity affects such preference changes. After manipulation of their social rank, participants were asked to indicate how much they liked or disliked a series of images. Then, they were shown the rating given to each image by a partner (either inferior or superior in social rank) and were given a chance to adjust their ratings. The participants were more likely to change their preferences to match those of a superior partner in the public vs. private condition. The tendency to conform to the views of the superior partner was stronger among those with higher social dominance orientation (SDO) and those with greater fear of negative evaluation (FNE) by others. Altogether, the findings suggest that the motivation to make better impressions on people of higher social status can be the major driver of conformity to others with higher social positions.

BackgroundThe burden of diabetes is considerable not only globally but also nationally within Korea. The Global Burden of Disease study derived the disability-adjusted life years (DALYs) of diabetes depending on its complications as individual severity using prevalence-based approach from 2017. Conversely, the Korean National Burden of Disease study based on an incidence-based approach does not incorporate the severity of diseases. This study aimed to simulate incidence-based DALYs of type 2 diabetes mellitus (T2DM), given diabetic complications as disease severity using a Markov model.MethodsWe developed a model with six Markov states, including incident and existing prevalent cases of diabetes and its complications and death. We assumed that diabetes and its complications would not be cured. The cycle length was one year, and the endpoint of the simulation was 100 years. A 5% discount rate was adopted in the analysis. Transition cases were counted by 5-year age groups above 30 years of age. Age- and sex-specific transition probabilities were calculated based on the incident rate.ResultsThe total DALY estimates of T2DM were 5,417 and 3,934 per 100,000 population in men and women, respectively. The years of life lost in men were relatively higher than those in women in most age groups except the 80-84 age group. The distribution of years lived with disability by gender and age group showed a bell shape, peaking in the 55-59 age group in men and 65-69 age group in women.ConclusionsThe burden of T2DM considering its complications was larger compared to the outcomes from previous studies, with more precise morbid duration using the Markov model.

Summary: Disturbed flow (d-flow) induces atherosclerosis by regulating gene expression in endothelial cells (ECs). For further mechanistic understanding, we carried out a single-cell RNA sequencing (scRNA-seq) and scATAC-seq study using endothelial-enriched single cells from the left- and right carotid artery exposed to d-flow (LCA) and stable-flow (s-flow in RCA) using the mouse partial carotid ligation (PCL) model. We find eight EC clusters along with immune cells, fibroblasts, and smooth muscle cells. Analyses of marker genes, pathways, and pseudotime reveal that ECs are highly heterogeneous and plastic. D-flow induces a dramatic transition of ECs from atheroprotective phenotypes to pro-inflammatory cells, mesenchymal (EndMT) cells, hematopoietic stem cells, endothelial stem/progenitor cells, and an unexpected immune cell-like (EndICLT) phenotypes. While confirming KLF4/KLF2 as an s-flow-sensitive transcription factor binding site, we also find those sensitive to d-flow (RELA, AP1, STAT1, and TEAD1). D-flow reprograms ECs from atheroprotective to proatherogenic phenotypes, including EndMT and potentially EndICLT.

Consumers’ demand for ‘healthy’ food is growing at a fast pace. Beverages are one of the fastest-growing segments in the healthy food market. Kombucha is a product with a rapid market growth and is considered a ‘healthy beverage’. Kombucha drinkers (n = 296) in the contiguous United States (U.S.) were targeted to investigate differences in the various consumer segments regarding the healthy eater’s behavior, namely—(1) healthy diet stage-of-change attitudes, (2) healthy eating criteria, and (3) label information usage. An online survey questionnaire was used as a data collection tool. The data were analyzed via chi-square tests and multiple correspondence analysis (MCA). The majority of kombucha consumers were health-conscious and kombucha fitted into their view of a healthy diet. The female, older, western U.S. residents, and higher-educated consumers were more likely to take action and maintain a healthier diet. Healthy eaters’ idea of a healthy diet was very similar to that of the general population. Kombucha consumers focused mainly on sugar/calories and natural/organic ingredients. Additional investigations to expand the understanding of the healthy eater’s behavior with actual kombucha samples are needed in the future.

White wine consists of numerous chemical constituents such as volatile and nonvolatile compounds including organic acids and polyphenols, which can affect aroma and flavor profiles. In addition to the enological factors, chemical analysis of commercial wines is also important for understanding consumer perception. Volatile compounds are major contributors to wine aroma. Nonvolatile compounds affect the flavor of wine, through acidity, sweetness, bitterness, and astringency. The volatile aroma profiles of 12 commercial white wines were analyzed using headspace solid-phase microextraction (HS-SPME), with gas chromatography–mass spectrometry (GC–MS). High-performance liquid chromatography (HPLC) and a Y15 automatic analyzer were used to identify and quantify 10 polyphenols and 12 other target nonvolatile compounds. Sensory evaluation of sample wines was conducted by wine consumers. White wines were distinguished based on volatile and nonvolatile compositions. A total of 33 volatile compounds and 23 nonvolatile compounds were analyzed. Seven volatile compounds were correlated with consumer acceptability. Sugars are positively correlated with consumer preference, while nonvolatile substances such as acetic acid and catechins are negatively correlated with consumer preference. These results might further our understanding of the relationship between the chemical composition and consumer preferences in commercial wines.

Objective: The aim of the study was to determine the relationships between short cervical length (CL) and levels of cervical fluid neutrophil elastase (NE), secretory leukocyte protease inhibitor (SLPI), and interleukin 8 (IL-8) in the second trimester of pregnancy of women who underwent ultrasound-indicated cervical cerclage. Materials and methods: CL of

Abstract Background Natural product is one of the most important sources of drugs used in pharmaceutical therapeutics. Artemisia capillaris has been traditionally used as a hepatoprotective and anti-inflammatory agent. In this study, we extracted an ethanol fraction (LAC117) from the dried leaves of Artemisia capillaris and identified its anticancer activity and mechanism of action against hepatocellular carcinoma (HCC). Methods Anti-proliferative effect of LAC117 was evaluated by MTT assay and BrdU assay. The apoptotic effect of LAC117 on the expression of cleaved PARP and cleaved caspase-3 was evaluated by Western blot and immunohistochemistry from in vivo mouse xenograft, respectively. Results We found that LAC117 strongly suppressed the growth and proliferation of human HCC cell lines (HepG2 and Huh7). Induction of apoptosis was evidenced by the increases of cleaved caspase-3 and PARP as well as TUNEL-positive cells. Additionally, the pro-apoptotic effect of LAC117 was observed by a decrease in the expression of the XIAP and an increase in cytochrome c releases via mitochondrial membrane potential. Moreover, it significantly inhibited PI3K/AKT pathway in HCC in vivo and in vitro. LAC117 suppressed tumor growth in an ex vivo model as well as in vivo mouse xenograft by inducing apoptosis and inhibiting tumor cell proliferation. Conclusions The present study highlights that LAC117 could not only efficiently induce apoptosis, but also inhibit the growth of human HCC cells by blocking the PI3K/AKT signaling pathway, suggesting that LAC117 would be a potentially useful drug candidate against HCC.

We studied the variation in electrical conductivity of exfoliated RuO2 nanosheets and the modulation in the contact resistance of individual nanosheet devices using charge transfer doping effects based on surface metal nanoparticle decorations. The electrical conductivity in the monolayer and bilayer RuO2 nanosheets gradually increased due to the surface decoration of Cu, and subsequently Ag, nanoparticles. We obtained contact resistances between the nanosheet and electrodes using the four-point and two-point probe techniques. Moreover, the contact resistances decreased during the surface decoration processes. We established that the surface decoration of metal nanoparticles is a suitable method for external contact engineering and the modulation of the internal properties of nanomaterials.

Abstract Background In 2012, a new pharmaceutical policy was introduced in Korea. According to the new policy, off-patent brand-name drugs (original drugs) and generic drugs must be priced the same. Methods This study aims to investigate the perception and attitude of Korean physicians towards generic drugs before and after the policy reform. Surveys were conducted with registered doctors at the Health Insurance Review Agency (HIRA) twice, in 2011 and 2013, by means of email and HIRA online survey systems. Results In the 2011 survey, 82% knew about the bioequivalent (BE) guideline, whereas only 25.7% trusted BE testing results. More than half preferred original drugs to generic drugs because of clinical experience and generic drugs confidence limits. 64.2% pointed out that the Korean generic drugs prices are more expensive than in other counties. In the 2013 survey, 73% preferred original drugs to generic drugs because of believed difference in drug effectiveness. After the pricing policy reform, 35.5% stated that they didn’t change their prescribing pattern, whereas 29.7% stated that they began prescribing generic drugs. Conclusions The Korean government has revised and strengthen the guideline on BE test to improve the quality and confidence of generic drugs. Although generic drugs prescription was increased slightly more than the 2011 survey, 2013 survey showed that around 70% of respondents still preferred original drugs.

CeOx hybrid nanoparticles were synthesized and evaluated for use as radical scavengers, in place of commercially available Ce(NO3)3 and CeO2 nanoparticles, to avoid deterioration of the initial electrochemical performance and/or spontaneous aggregation/precipitation issues encountered in polymer electrolyte membranes. When CeOx hybrid nanoparticles were used for membrane formation, the resulting membranes exhibited improved proton conductivity (improvement level = 2–15% at 30–90 °C), and thereby electrochemical single cell performance, because the –OH groups on the hybrid nanoparticles acted as proton conductors. In spite of a small amount (i.e., 1.7 mg/cm3) of introduction, their antioxidant effect was sufficient enough to alleviate the radical-induced decomposition of perfluorinated sulfonic acid ionomer under a Fenton test condition and to extend the chemical durability of the resulting reinforced membranes under fuel cell operating conditions.

Abstract Background Previous evidence suggests that there is a correlation between prolonged sitting time and cardio-metabolic disease, such as metabolic syndrome (MS). Cardiovascular disease is the second-leading cause of mortality in South Korea, a country with the longest working hours among all member states of the Organization for Economic Co-operation and Development. However, no previous study has investigated the relationships of overall sitting-time and occupation with MS in South Korea. Accordingly, the present study examined these relationships in a South Korean population. Methods Data from the sixth Korean National Health and Nutrition Examination Survey (KNHANES), a nationally representative survey with a cross-sectional design, were used in the present study. MS diagnoses were evaluated using the International Diabetes Foundation (IDF) criteria. Participants self-reported their overall sitting times, and occupations were classified using the Korean version of the Standard Classification of Occupations (KSCO). A multiple logistic regression analysis was conducted to evaluate the associations of sitting time and occupation with MS. Results The risk of MS was 1.21-fold higher among participants who sat for >7 h/day than among those who sat for ≤7 h/day (odds ratio [OR]: 1.21, 95 % confidence interval [CI]: 1.00–1.46). Regarding occupation, office workers had a two-fold higher risk of MS than did agriculture, forestry, and fishery (AFF) workers (OR: 2.01, 95 % CI: 1.26–3.22). In a combined analysis of sitting time and occupation, male participants who sat for >7 h/day and reported an occupation that involves office work (OW) or machine fitting (MF) were significantly more likely to have MS when compared to those who sat for ≤7 h/day and were employed as AFF workers (>7 h/day × OW, OR: 2.41, 95 % CI: 1.05–5.51; >7 h/day × MF, OR: 2.92, 95 % CI: 1.43–5.93). Conclusions Excessive sitting time and a sedentary occupation correlated positively with MS in South Korean adults. Accordingly, a reduction in the overall sitting time or inclusion of energy-expending activities in the workplace might improve the rate of MS.

Metal-assisted chemical etching (MACE) is widely used to fabricate micro-/nano-structured Si owing to its simplicity and cost-effectiveness. The technique of magnetically guided MACE, involving MACE with a tri-layer metal catalyst, was developed to improve etching speed as well as to adjust the etching direction using an external magnetic field. However, the controllability of the etching direction diminishes with an increase in the etching dimension, owing to the corrosion of Fe due to the etching solution; this impedes the wider application of this approach for the fabrication of complex micro Si structures. In this study, we modified a tri-layer metal catalyst (Au/Fe/Au), wherein the Fe layer was encapsulated to improve direction controllability; this improved controllability was achieved by protecting Fe against the corrosion caused by the etching solution. We demonstrated curved Si microgroove arrays via magnetically guided MACE with Fe encapsulated in the tri-layer catalyst. Furthermore, the curvature in the curved Si microarrays could be modulated via an external magnetic field, indicating that direction controllability could be maintained even for the magnetically guided MACE of bulk Si. The proposed fabrication method developed for producing curved Si microgroove arrays can be applied to electronic devices and micro-electromechanical systems.

Kombucha is a fermented functional beverage that started as a homemade beverage and grew into a commercial product in the U.S. by the turn of this century. The number of companies producing kombucha, as well as the variety of kombucha products, is increasing rapidly. The scientific research on kombucha also got active along with the growth in the market. The topics of kombucha research can be grouped into the substrate used in fermentation, the microbial composition of the cultures, processing methods, chemical composition, the health benefits and health risks associated with consumption, the utilization of symbiotic cultures of bacteria and yeasts (SCOBYs), etc. There are several already published in-depth scientific reviews covering these topics. Even with the sensory characteristics of kombucha being a critical aspect of the beverage, there are not many publications covering the sensory and consumer research on this beverage. This review paper aims to provide the current market status of kombucha and to show a need for scientific sensory and consumer research studies to help the kombucha researchers and industry working on this fast-growing beverage.

We report the effect of zirconium oxide (ZrO2) layers on the electrical characteristics of multilayered tin disulfide (SnS2) formed by atomic layer deposition (ALD) at low temperatures. SnS2 is a two-dimensional (2D) layered material which exhibits a promising electrical characteristics as a channel material for field-effect transistors (FETs) because of its high mobility, good on/off ratio and low temperature processability. In order to apply these 2D materials to large-scale and flexible electronics, it is essential to develop processes that are compatible with current electronic device manufacturing technology which should be conducted at low temperatures. Here, we deposited a crystalline SnS2 at 150 °C using ALD, and we then annealed at 300 °C. X-ray diffraction (XRD) and Raman spectroscopy measurements before and after the annealing showed that SnS2 had a hexagonal (001) peak at 14.9° and A1g mode at 313 cm−1. The annealed SnS2 exhibited clearly a layered structure confirmed by the high resolution transmission electron microscope (HRTEM) images. Back-gate FETs with SnS2 channel sandwiched by top and bottom ZrO2 on p++Si/SiO2 substrate were suggested to improve electrical characteristics. We used a bottom ZrO2 layer to increase adhesion between the channel and the substrate and a top ZrO2 layer to improve contact property, passivate surface, and protect from process-induced damages to the channel. ZTZ (ZrO2/SnS2/ZrO2) FETs showed improved electrical characteristics with an on/off ratio of from 0.39×103 to 6.39×103 and a mobility of from 0.0076 cm2/Vs to 0.06 cm2/Vs.

Since vegetable oils (usually triacylglycerol [TAG]) are extensively used as food and raw materials, an increase in storage oil content and production of valuable polyunsaturated fatty acids (PUFAs) in transgenic plants is desirable. In this study, a gene encoding glycerol-3-phosphate acyltransferase 9 (GPAT9), which catalyzes the synthesis of lysophosphatidic acid (LPA) from a glycerol-3-phosphate and acyl-CoA, was isolated from Physcomitrella patens, which produces high levels of very-long-chain PUFAs in protonema and gametophores. P. patens GPAT9 shares approximately 50%, 60%, and 70% amino acid similarity with GPAT9 from Chlamydomonas reinhardtii, Klebsormidium nitens, and Arabidopsis thaliana, respectively. PpGPAT9 transcripts were detected in both the protonema and gametophores. Fluorescent signals from the eYFP:PpGPAT9 construct were observed in the ER of Nicotiana benthamiana leaf epidermal cells. Ectopic expression of PpGPAT9 increased the seed oil content by approximately 10% in Arabidopsis. The levels of PUFAs (18:2, 18:3, and 20:2) and saturated FAs (16:0, 18:0, and 20:0) increased by 60% and 43%, respectively, in the storage oil of the transgenic seeds when compared with the wild type. The transgenic embryos with increased oil content contained larger embryonic cells than the wild type. Thus, PpGPAT9 may be a novel genetic resource to enhance storage oil yields from oilseed crops.

In this study, an organic–inorganic (O–I) nanohybrid obtained by incorporating an alkoxysilane-functionalized amphiphilic polymer precursor into a SiO2–TiO2 hybrid network was successfully utilized as a buffer layer to fabricate a flexible, transparent, and stable conductive substrate for solution-processed silver nanowires (AgNWs) and graphene under ambient conditions. The resulting O–I nanohybrid sol (denoted as AGPTi) provided a transmittance of the spin-coated AgNWs on an AGPTi-coated glass of 99.4% and high adhesion strength after a 3M tape test, with no visible changes in the AgNWs. In addition, AGPTi acted as a highly functional buffer layer, absorbing the applied pressure between the conductive materials, AgNWs and graphene, and rigid substrate, leading to a significant reduction in sheet resistance. Furthermore, gravure-printed AgNWs and graphene on the AGPTi-based flexible substrate had uniform line widths of 490 ± 15 and 470 ± 12 µm, with 1000-cycle bending durabilities, respectively.

Rosiglitazone is a well-known anti-diabetic drug that increases insulin sensitivity via peroxisome proliferator-activated receptor γ (PPARγ) activation, but unfortunately it causes bone loss in animals and humans. A previous study showed that prolyl hydroxylase domain protein (PHD) plays a role in rosiglitazone-induced adipocyte differentiation. Based on the inverse relationship between adipocyte and osteoblast differentiation, we investigated whether PHD is involved in the effects of rosiglitazone on osteoblast differentiation. Rosiglitazone inhibited osteoblast differentiation in a concentration-dependent manner, and in parallel induced three PHD isoforms (PHD1, 2, and 3). PHD inhibitors and knockdown of each isoform prevented the inhibitory effects of rosiglitazone on osteoblast differentiation and increased the expression of Runx2, a transcription factor essential for osteoblastogenesis. MG-132, a proteasomal inhibitor also prevented the rosiglitazone-induced degradation of Runx2. Furthermore, both increased PHD isoform expressions and reduced osteoblast differentiation by rosiglitazone were prevented by PPARγ antagonists, indicating these effects were mediated via PPARγ activation. In vivo oral administration of rosiglitazone to female ICR mice for 8 weeks reduced bone mineral densities and plasma alkaline phosphatase (ALP) activity, and increased PHD expression in femoral primary bone marrow cells and the ubiquitination of Runx2. Together, this suggests that the rosiglitazone-induced suppression of osteoblast differentiation is at least partly induced via PPARγ-mediated PHD induction and subsequent promotion of the ubiquitination and degradation of Runx2.

In this article, we report on a novel diaphragm-type tactile pressure sensor that produces stepwise output currents depending on varying low contact pressures. When contact pressures are applied to the stepped output tactile sensor (SOTS), the sensor’s suspended diaphragm makes contact with the substrate, which completes a circuit by connecting resistive current paths. Then the contact area, and therefore the number of current paths, would determine the stepped output current produced. This mechanism allows SOTS to have high signal-to-noise ratio (>20 dB) in the 3–500 Hz frequency range at contact pressures below 15 kPa. Moreover, since the sensor’s operation does not depend on a material’s pressure-dependent electrical properties, the SOTS is able to demonstrate high reproducibility and reliability. By forming a 4 × 4 array of SOTS with a surface bump structure, we demonstrated shear sensing as well as surface (1 × 1 cm2) pressure mapping capabilities.