Search

The electrophilic fluorination of geminal alkyl substituted vinyl-Bmida derivatives proceeds via bora-Wagner-Meerwein rearrangement. According to DFT modelling studies this rearrangement occurs with a low activation barrier via a bora-cyclopropane shaped TS. The Bmida group has a larger migration aptitude than the alkyl moiety in the Wagner-Meerwein rearrangement of the presented electrophilic fluorination reactions.

A broad range of aliphatic, aromatic, and heterocyclic boronic acids were successfully homologated using trifluorodiazoethane in the presence of BINOL derivatives to provide the corresponding chiral trifluoromethyl containing boronic acid derivatives in high yields and excellent enantioselectivity. The in situ conversion of the chiral transient boronic acids to the corresponding alcohols or β-CF3 carboxylates are also demonstrated.

Chiral α-substituted allylboronic acids were synthesized by asymmetric homologation of alkenylboronic acids using CF3/TMS-diazomethanes in the presence of BINOL catalyst and ethanol. The chiral α-substituted allylboronic acids were reacted with aldehydes or oxidized to alcohols in situ with a high degree of chirality transfer. The oxygen-sensitive allylboronic acids can be purified via their isolated diaminonaphthalene (DanH)-protected derivatives. The highly reactive purified allylboronic acids reacted in a self-catalyzed reaction at room temperature with ketones, imines, and indoles to give congested trifluoromethylated homoallylic alcohols/amines with up to three contiguous stereocenters.

Togni’s benziodoxole-based reagents are widely used in trifluoromethylation reactions. It has been established that the kinetically stable hypervalent iodine form (I–CF3) of the reagents is thermodynamically less stable than its acyclic ether isomer (O–CF3). On the other hand, the trifluoromethylthio analogue exists in the thermodynamically stable thioperoxide form (O–SCF3), and the hypervalent form (I–SCF3) has been elusive. Despite the importance of these reagents, very little is known about the reaction mechanisms of their syntheses, which has hampered the development of new reagents of the same family. Herein, we use density functional theory calculations to understand the reasons for the divergent behaviors between the CF3 and SCF3 reagents. We demonstrate that they follow different mechanisms of formation and that the metals involved in the syntheses (potassium in the case of the trifluoromethyl reagent and silver in the trifluoromethylthio analogue) play key roles in the mechanisms and greatly influence the possibility of their rearrangements from the hypervalent (I–CF3, I–SCF3) to the corresponding ether-type form (O–CF3, O–SCF3).

1,1-Disubstituted styrenes with internal oxygen and nitrogen nucleophiles undergo oxidative fluorocyclization reactions with in situ generated chiral iodine(III)-catalysts. The resulting fluorinated tetrahydrofurans and pyrrolidines contain a tertiary carbon-fluorine stereocenter. Application of a new 1-naphthyllactic acid-based iodine(III)-catalyst allows the control of tertiary carbon-fluorine stereocenters with up to 96% ee. Density functional theory calculations are performed to investigate the details of the mechanism and the factors governing the stereoselectivity of the reaction.

Diazocarbonyl compounds are useful substrates in di- and trifunctionalization reactions based on F/CF3/SCF3 introduction. In the presented reactions, various electrophilic F/CF3/SCF3-transfer reagents were used. The majority of the reactions were based on rhodium catalysis and the application of various oxygen nucleophiles, such as alcohols, cyclic/acyclic ethers, and carboxylic acids. The oxyfluorination reactions were further developed to provide a new fluorine-18 labeling method. Density functional theory (DFT) modeling studies were performed to get a deeper mechanistic understanding of these reactions. These DFT modeling studies indicated that the catalytic reactions proceed through formation of rhodium carbene and oxonium ylide intermediates. The oxonium ylides undergo tautomerization to enol ether type species that subsequently react with the electrophilic F/CF3/SCF3-transfer reagents. We also present an arylation–trifluoromethylthiolation reaction for simultaneous introduction of C–SCF3 and C–C bonds into diazocarbonyl compounds. This reaction does not proceed by rhodium catalysis, but follows a Hooz-type mechanism.1 Introduction2 Diazocarbonyl Compounds: Versatile Substrates in Organic ­Synthesis3 Fluorination, Trifluoromethylation, and Trifluoromethylthiolation of Diazo Substrates3.1 Metal-Free Reactions3.2 Metal-Catalyzed Reactions with Nucleophilic Reagents3.3 Metal-Catalyzed Reactions with Electrophilic Reagents4 Oxyfluorination Reactions4.1 Fluorobenziodoxole as a Fluorine Source4.2 [18F]Fluorobenziodoxole as a Fluorine Source for Radiolabeling4.3 Oxyfluorination with NFSI5 Oxytrifluoromethylation6 Oxytrifluoromethylthiolation7 Arylation–Trifluoromethylthiolation Reaction8 Conclusions and Outlook

Oxidative coupling is a useful tool to synthesize vinylarenes. Despite remarkable successes in linear vinylarene, branched vinylarene synthesis has remained underdeveloped. Overcoming this limitati...

This study reports a new application area of difluoro enol silyl ethers, which can be easily obtained from trifluoromethyl ketones. The main focus has been directed to the electrophilic fluoroalkylation and arylation methods. The trifluoromethylthiolation of difluoro enol silyl ethers can be used for the construction of a novel trifluoromethylthio-α,α-difluoroketone (-COCF2SCF3) functionality. The -CF2SCF3 moiety has interesting properties due to the electron-withdrawing, albeit lipophilic, character of the SCF3 group, which can be combined with the high electrophilicity of the difluoroketone motif. The methodology could also be extended to difluoro homologation of the trifluoromethyl ketones using the Togni reagent. In addition, we presented a method for transition-metal-free arylation of difluoro enol silyl ethers based on hypervalent iodines.

Geminal 18F-oxyfluorination of diazoketones was performed in the presence of rhodium mediators. The reactions were performed using a hypervalent iodine-based [18F]fluoro-benziodoxole reagent. By this methodology various α-[18F]fluoro ethers were obtained in high radiochemical yield (up to 98%) and molar activity (216 GBq μmol-1).

A new Zn-mediated trifluoromethylthiolation-based bifunctionalization reaction is developed. In this process, simultaneous C–SCF3 and C–C bond formation takes place in a multicomponent reaction, in which an aryl and a SCF3 group arise from different reagents. Our studies show that the reaction mechanism is similar to the Hooz multicomponent coupling. The process involves in situ generation of BAr3, which reacts with a diazocarbonyl compound, and the reaction is terminated by an electrophilic SCF3 transfer. The reaction can also be extended to fluorination based bifunctionalization which proceeds with somewhat lower yield than the analogous trifluoromethylthiolation reaction.

Density functional theory calculations were performed to study the detailed reaction mechanisms of rhodium-catalyzed oxyaminofluorination and oxyaminotrifluoromethylthiolation of diazocarbonyl compounds with electrophilic N–F and N–SCF3-based reagents. The calculations show that the operating mechanisms for the two reactions are identical. The catalytic cycle starts with N2 dissociation to provide a rhodium–carbene intermediate, followed by nucleophilic attack of tetrahydrofuran on the carbene and a rhodium coordination change generating a rhodium–enolate intermediate. Subsequent electrophilic attack introduces the fluorine or the SCF3 moiety, and it is followed by nucleophilic attack of the remaining amino group to yield the final product.

The reaction mechanisms of rhodium-catalyzed geminal oxyfluorination and oxytrifluoromethylation of diazocarbonyl compounds with fluoro-benziodoxole and Togni reagents are investigated by means of density functional theory calculations. It is shown that the two reactions follow very similar mechanisms, involving N2 dissociation to form a Rh–carbene intermediate, alcohol insertion and proton transfer resulting in a stable Rh–enol intermediate, and concerted proton transfer/electrophilic addition of the hypervalent iodine reagent to the enol. Isomerization of the hypervalent iodine takes then place before a ligand coupling affords the final product. The role of the dirhodium catalyst in facilitating the various steps of the reaction is discussed. The presented mechanisms are consistent with available experimental information, and the obtained insights allow for extension to other reactions involving hypervalent iodine reagents.

Tri- and tetrasubstituted allenylboronic acids were prepared via a new versatile copper-catalyzed methodology. The densely functionalized allenylboronic acids readily undergo propargylboration reactions with ketones and imines without any additives. Catalytic asymmetric propargylborylation of ketones is demonstrated with high stereoselectivity allowing for the synthesis of highly enantioenriched tertiary homopropargyl alcohols. The reaction is suitable for kinetic resolution of racemic allenylboronic acids affording alkynes with adjacent quaternary stereocenters.

Operationally simple radiosynthesis and purification of [F-18]fluoro-benziodoxole was developed starting from a cyclotron produced [F-18]F- precursor, [F-18]TBAF, and tosyl-benziodoxole. The synthetic utility of [F-18]fluoro-benziodoxole was demonstrated by electrophilic fluorocyclization of o-styrilamides proceeding with high RCC (typically 50-90%) and high molar activity (up to 396 GBq mol(-1)).

A new asymmetric catalytic propargyl- and allylboration of hydrazonoesters is reported. The reactions utilize allenyl- and allylboronic acids in the presence of the inexpensive parent BINOL catalyst. The reactions can be performed under mild conditions (0 °C) without any metal catalyst or other additives affording sterically encumbered chiral α-amino acids. This is the first metal-free method for the asymmetric propargyl- and allylboration of hydrazonoesters.

An efficient methodology for the synthesis of vinyl-, allyl-, and (E)-2-boryl allylboronates from propargylic alcohols via Cu-catalyzed borylation under mild conditions is reported. In the presence of commercially available Cu(OAc)2 or Cu(acac)2 and Xantphos, the reaction affords the desired products in up to 92% yield with a broad substrate scope (43 examples). Isolation of an allenyl boronate as the reaction intermediate suggests that an insertion–elimination-type reaction, followed by borylcupration, is involved in the borylation of propargylic alcohols.

α,α’-Disubstituted styrenes undergo a difluorination-rearrangement reaction with fluoro-benzoiodoxole reagent 1 . The reaction is catalyzed by Pd(MeCN) 4 (BF 4 ) 2 and Cu(MeCN) 4 PF 6 . We have studied the rearrangement of α,α’-diaryl substituted styrenes, in which the aryl groups have different electronic character. In the case of α-aryl, α’-alkyl substituted styrenes, the aryl substituent has a higher migratory aptitude than the alkyl group. We have also extended the reactions to cycloalkyl styrenes, which underwent interesting ring contraction/expansion reactions. The regioselectivity of the migration can be explained on the basis of the formation of a phenonium intermediate.

Density functional theory calculations have been performed to investigate the binaphthol-catalyzed allylboration of skatoles. The high stereoselectivity observed for the reaction is reproduced well by the calculations and was found to be mainly a result of steric repulsions in the corresponding Zimmerman-Traxler transition states. The role of the additive MeOH in enhancing the stereoselectivity was also investigated and is suggested to promote the formation of less reactive allylboronic ester intermediates, thereby suppressing the formation of allylboroxine species, which undergo the facile racemic background reaction.

The nucleophilic fluorination of bromodifluoromethyl derivatives mediated by the complex (PPh 3 ) 3 CuF is described. Under the reaction conditions, different trifluoroacetates, trifluoroketones, trifluoroarenes and trifluoroacetamides were obtained in good yields.

Geminal

Reaction of 1,1-disubstituted cyclopropanes with hypervalent iodines in the presence of AgBF4 leads to 1,3-difluorination and 1,3-oxyfluorination products., A new method is presented for 1,3-difluorination and 1,3-oxyfluorination reactions. The process is based on iodonium mediated opening of 1,1-disubstituted cyclopropanes. The reaction proceeds with high chemo- and regioselectivity under mild reaction conditions typically at room temperature in a couple of hours. The reaction probably occurs via electrophilic ring-opening of cyclopropanes.

The catalytic asymmetric allylboration of cyclic imines with γ,γ‐disubstituted allylboronic acids provides products with adjacent stereocenters in high yield and stereoselectivity. Various electrophiles, including 3,4‐dihydroisoquinolines and indoles, were prenylated in a fully stereodivergent fashion by switching the E/Z geometry of the allylboronate and/or the enantiomer of the BINOL catalyst. 3‐Methylindole provided products with three adjacent stereocenters with high stereoselectivity in one synthetic operation.

Filiació URV: SI El títol canvia a la versió definitiva! The base-catalyzed allylic borylation of tertiary allylic alcohols allows the synthesis of 1,1-disubstituted allyl boronates, in moderate to high yield. The unexpected tandem performance of the Lewis acid-base adduct, [Hbase]+[MeO-B2pin2]- favoured the formation of 1,2,3-triborylated species from the tertiary allylic alcohols and 1-propargylic cyclohexanol, at 90ºC.

Tosylhydrazones and allenylboronic acids underwent a transition-metal-free reductive coupling reaction. This process is suitable for synthesis of tetra- and pentasubstituted conjugated dienes. The corresponding allenyl-Bpin substrate showed a very poor reactivity. The reaction is suggested to involve coupling of the in situ formed diazo compound and allenylboronic acid. The intermediate formed in this coupling undergoes allenyl migration followed by protodeboronation to furnish a conjugated diene as major product.

Nucleophilic 18F-fluorination of bromodifluoromethyl derivatives was performed using [18F]Bu4NF in the presence of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene). This novel procedure provided a diverse set of [18F]trifluoroacetamides in good to excellent radiochemical conversions. A mechanism where DBU acts as organomediator in this transformation is proposed.

The application of an air- and moisture-stable fluoroiodane reagent was investigated in the palladium-catalyzed iodofluorination reaction of alkenes. Both the iodo and fluoro substituents arise from the fluoroiodane reagent. In the case of certain palladium catalysts, the alkene substrates undergo allylic rearrangement prior to the iodofluorination process. The reaction is faster for electron-rich alkenes than for electron-deficient ones.

Bimetallic copper-/palladium-catalyzed multicomponent reaction of propargyl carbonates, aryl iodides, and diboron species was studied. This procedure can be used for synthesis of di-, tri-, and tetra-substituted allenes. Using diboronic acid, the reaction is supposed to proceed via allenylboronic acid intermediate.

Palladium-catalyzed oxidative annulations between phenols and alkenylcarboxylic acids produced a library of benzofuran compounds. Depending on the nature of the substitution of the phenol precursor, either 2,3-dialkylbenzofurans or 2-alkyl-3-methylene-2,3-dihydrobenzofurans can be synthesized with excellent regioselectivity. Reactions between conjugated 5-phenylpenta-2,4-dienoic acids and phenol gave 3-alkylidenedihydrobenzofuran alkaloid motifs while biologically active 7-arylbenzofuran derivatives were prepared by starting from 2-phenylphenols. More interestingly, selective incorporation of deuterium from D2O has been discovered, which offers an attractive one-step method to access deuterated compounds.

Application of a fluoroiodine analogue of the Togni reagent was studied in fluorocyclization reactions. In the presence of a transition-metal catalyst the applied fluoroiodine reagent can be used for aminofluorination, oxyfluorination, and carbofluorination reactions. The described procedure has a very broad synthetic scope for preparation of functionalized hetero- and isocyclic compounds having a tertiary fluorine substituent.

The reaction of mono- and dialdehydes with bis-borodienes (incorporating an allylboronate unit) has been studied. It was found that the initial allylboration reaction results in an allenylboronate, which has two stereogenic units: one of them has axial chirality and the other one is a stereogenic carbon center. This reaction proceeds with high diastereoselectivity. The allenylboronate formed in the allylboration reacts with an additional aldehyde with fair to high stereoselectivity depending on the aldehyde substrate. Aromatic dialdehydes react with bis-boro-butadienes creating three new stereocenters with usually high diastereoselectivity.

The copper-catalyzed oxytrifluoromethylation of phenylacetylenes and C-H trifluoromethylation of quinones were studied. It was found that both reactions are accelerated by B(2)pin(2) and PCy3 addit ...

This communication describes an efficient palladium pincer complex-catalyzed allylic C–H borylation of alkenes. The transformation exhibits high regio- and stereoselectivity with a variety of linear alkenes. A synthetically useful feature of this allylic C–H borylation method is that all allyl-Bpin products can be isolated in usually high yields. Preliminary mechanistic studies indicate that this C–H borylation reaction proceeds via Pd(IV) pincer complex intermediates.

A new Rh-catalyzed, three-component reaction for the oxytrifluoromethylthiolation of α-diazoketones was developed. The SCF3 functionality was introduced using a stable dibenzenesulfonimide reagent under mild conditions. Alcohols, acetals, and ethers were used as the alkoxy sources. Cyclic ethers underwent a trifunctionalization reaction through the introduction of SCF3, OR, and N(SO2Ph)2 substituents in a single step.

In this study, we present the synthesis of new, stereodefined allylboronic acids employed to investigate the stereochemistry of the Cu-catalyzed cross-coupling of allylboronic acids with α-diazoketones. According to our results, this reaction proceeds with retention of the relative configuration of the allylboronic acid substrate. We suggest that the stereoinduction step involves a syn S

Alcohols are among the most abundant and readily available organic feedstocks in industrial processes. The direct catalytic functionalization of sp3 C–O bonds of alcohols remains the main challenge in this field. Here, we report a copper-catalyzed synthesis of benzyl-, allyl-, and allenyl-boronates from benzylic, allylic, and propargylic alcohols, respectively. This protocol exhibits a broad reaction scope (40 examples) and high efficiency (up to 95% yield) under mild conditions, including for the preparation of secondary allylic boronates. Preliminarily mechanistic studies suggest that nucleophilic substitution is involved in this reaction.

Styrenes with an electron-deficient double bond undergo cyanotrifluoromethylation with a trifluoromethylated hypervalent iodine reagent in the presence of CuCN. The reaction proceeds under mild conditions in the presence of bulky phosphines or B2pin2 additives. The process is highly regioselective and involves the consecutive formation of two C-C bonds in a single addition reaction. In the presence of a p-methoxy substituent in the styrene, oxytrifluoromethylation occurs instead of the cyanotrifluoromethylation.

Copper-mediated trifluoromethylation of allylic chlorides and trifluoroacetates was performed using a convenient Cu-CF3 reagent. The reaction is suitable for selective synthesis of allyl trifluoromethyl species. Mechanistic studies indicate that the reaction proceeds via a nucleophilic substitution mechanism involving allyl copper intermediates. The analogous Cu-F reagent was suitable for fluorination of allyl chlorides. Stereodefined cyclic substrates reacted regio- and stereoselectively.

In this Perspective we will highlight the most important recent breakthroughs in selective allylboron chemistry (both the synthesis and application of these species). In addition we will provide an outlook toward the future of this promising subfield of organic synthesis.

Stable and easily accessible benziodoxole reagents are used as fluorine source in reactions of aromatic and aliphatic diazocarbonyl compounds with a variety of alcohols, phenol, and carboxylic acids.

Palladium catalyzed cross-coupling of allylboronic acids with α-diazoketones was studied. The reaction selectively affords the linear allylic product. The reaction proceeds with formation of a new C(sp3)–C(sp3) bond. The reaction was performed without an external oxidant, likely without the Pd-catalyst undergoing redox reactions.

The base-catalyzed allylic borylation of tertiary allylic alcohols allows the synthesis of 1,1-disubstituted allyl boronates, in moderate to high yield. The unexpected tandem performance of the Lewis acid-base adduct, [Hbase](+) [MeO-B2 pin2 ](-) favored the formation of 1,2,3-triborylated species from the tertiary allylic alcohols and 1-propargylic cyclohexanol at 90 °C.

Palladium catalyzed cross-coupling of allylboronic acids with α-diazoketones was studied. The reaction selectively affords the linear allylic product. The reaction proceeds with formation of a new C(sp(3))-C(sp(3)) bond. The reaction was performed without an external oxidant, likely without the Pd-catalyst undergoing redox reactions.

Bimetallic copper-/palladium-catalyzed multicomponent reaction of propargyl carbonates, aryl iodides, and diboron species was studied. This procedure can be used for synthesis of di-, tri-, and tetra-substituted allenes. Using diboronic acid, the reaction is supposed to proceed via allenylboronic acid intermediate.

A new reaction for the rhodium‐catalyzed geminal‐difunctionalization‐based fluorination is presented. The substrates are aromatic and aliphatic diazocarbonyl compounds. As the fluorine source a stable and easily accessible benziodoxole reagent was used. A variety of alcohol, phenol, and carboxylic acid reagents were employed to introduce the second functionality. The reaction was extended to trifluoromethylation using a benziodoxolon reagent. The fluorination and trifluoromethylation reactions probably proceed by a rhodium‐containing onium ylide type intermediate, which is trapped by either the F or CF3 electrophiles.