Search

Hybrid solar cells have been fabricated from solution processing of poly-(3-hexylthiophen-2,5-diyl) onto planar poly-crystalline thin film silicon (poly-Si) absorbers on glass. The poly-Si layers were prepared by laser crystallization. Methyl passivation of the poly-Si surface by a one-step grafting process via methyl-Grignard enabled open circuit voltages of up to 552 mV and an overall power conversion efficiency of 6.6% for this device type. The solar cell exhibited significant advantages compared to the wafer-based counterparts. The inverted device structure of the thin film cell lead to an enhancement of the quantum efficiency since the back side contacted cell had less light absorption and reflection losses due to the gold layer which was used as front contact for the c-Si-based hybrid solar cell. As a result, a photo current of 24.3 mA cm−2 was obtained for a 10 μm thin poly-Si layer on glass. Furthermore, the inverted device structure showed a pronounced increase in stability due to the much thicker gold back contact that reduces the diffusion of water and oxygen toward the polymer layer. After 3 months in ambient air, this type of solar cell operated with 86% of its initial efficiency. [ABSTRACT FROM AUTHOR]

Silicon carbide (SiC) is a promising material for the fabrication of optoelectronic devices. In the amorphous state physical-vapor-deposited SiC is already an essential part of the production of electron beam liquid phase crystallized silicon absorbers, because of its good wettability for the silicon melt. The resulting polycrystalline thin film absorbers exhibit excellent electrical properties (B. Eggleston et al. MRS Online Proc. Libr. 1426, 251 (2012)) and demonstrate the potential of this technology (J. Dore et al. IEEE J. Photovolt. 4, 33 (2014)). A drawback of amorphous SiC interlayers is their poor optical properties. In this work we investigate two different approaches. Firstly, we show how those properties can be improved by depositing SiC xO y layers to enhance the transmittance while maintaining the wettability. Secondly, the laser crystallization of amorphous silicon-carbon compounds is studied as a function of their composition and the applied laser fluence. Compared to the amorphous SiC layers a clear reduction of the absorption coefficient was achieved upon laser annealing without losing wettability. Raman backscattering measurements showed that laser annealing of reactively sputtered amorphous SiC leads to a material with a vibrational mode at 770 cm−1 that is indicative of 6H-SiC. Atomic force microscopy measurements of those crystalline layers also show an ordered triangular grain structure, which was not observed in the amorphous material. It is shown that segregation effects are strongly affected by the stoichiometry and the applied laser fluence. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Physics is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The relations between the filling state of intracellular calcium stores that are regulated by the endoplasmic Ca(2+)-ATPase and trans plasma membrane sodium and calcium influx were investigated. The effects of specific inhibition of endoplasmic Ca(2+)-ATPase by thapsigargin, cyclopiazonic acid, and 2,5-di-(tert-butyl)-1,4-benzohydroquinone (BHQ) on cytosolic free sodium concentration ([Na+]i) and cytosolic free calcium concentration ([Ca2+]i) were evaluated in lymphocytes from healthy subjects using the fluorescent dyes sodium-binding benzofuran isophthalate and fura2. The specific inhibition of endoplasmic Ca(2+)-ATPase by thapsigargin, cyclopiazonic acid, or BHQ increased lymphocytic [Na+]i and [Ca2+]i. The thapsigargin-induced [Na+]i increase was abolished in the absence of external sodium, indicating that thapsigargin induced a trans plasma membrane sodium influx. In the absence of external calcium the thapsigargin-induced [Ca2+]i increase was significantly reduced, whereas the thapsigargin-induced [Na+]i increase remained the same. This finding indicates that the filling state of intracellular calcium pools rather than the elevation of [Ca2+]i per se regulates the plasma membrane permeability for sodium in lymphocytes. The inhibition of the tyrosine kinase by genistein inhibited the thapsigargin-induced increases of both [Na+]i and [Ca2+]i in lymphocytes. The present study shows that the filling state of intracellular thapsigargin-sensitive calcium pools regulates trans plasma membrane sodium and calcium influx via a tyrosine kinase-dependent pathway.