Search

Bioponics is a nutrient-recovery technology that transforms nutrient-rich organic waste into plant biomass/bioproducts. Integrating biochar with digestate from anaerobic wastewater treatment process can improve resource recovery while mitigating heavy metal contamination. The overarching goal of this study was to investigate the application of biochar in digestate-based bioponics, focusing on its efficacy in nutrient recovery and heavy metal removal, while also exploring the microbial community dynamics. In this study, biochar was applied at 50 % w/w with 500 g dry weight of digestate during two 28-day crop cycles (uncontrolled pH and pH 5.5) using white stem pak choi (Brassica rapa var. chinensis) as a model crop. The results showed that the digestate provided sufficient phosphorus and nitrogen, supporting plant growth. Biochar amendment improved plant yield and phosphate solubilization and reduced nitrogen loss, especially at the pH 5.5. Furthermore, biochar reduced the heavy metal accumulation in plants, while concentrating these metals in the residual sludge. However, owing to potential non-carcinogenic and carcinogenic health risks, it is still not recommended to directly consume plants cultivated in digestate-based bioponic systems. Additionally, biochar amendment exhibited pronounced impact on the microbial community, promoting microbes responsible for nutrient solubilization and cycling (e.g., Tetrasphaera, Herpetosiphon, Hyphomicrobium, and Pseudorhodoplanes) and heavy metal stabilization (e.g., Leptolinea, Fonticella, Romboutsia, and Desulfurispora) in both the residual sludge and plants. Overall, the addition of biochar enhanced the microbial community and facilitated the metal stabilization and the cycling of nutrients within both residual sludge and root systems, thereby improving the overall efficiency of the bioponics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The deposition of MPs in a water column and surface sediment during a mixed spring tidal cycle of the Chao Phraya River estuary was investigated. The settling MPs during flood and ebb tides were collected by deploying traps at 3 m below the surface, while the settled MPs throughout the tidal cycle were collected by deploying traps at 1 m above the bottom. The settling rate of MPs was 2168 pieces/m 2 /h during highest to low tide, and 639 pieces/m 2 /h during high to lowest tide. The deposition rate of MPs after the end of the tidal cycle was 3172 pieces/m 2 /day, while the accumulation rate of MPs in the surface sediment was 1515 pieces/m 2 /day. The settling MPs tended to decrease inversely to the suspended solids and salinity. The major types of the deposited MPs were polyethylene (36 %) and polyamide (33 %), while that of the surface sediment was epoxy resin (80 %)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The study investigates residents' behavior towards reducing the use of single-use plastic (SUP), specifically in the context of food packaging. The widespread view holds that pro-environmental behavior (PB) results from a person's moral and rational deliberations. In reducing single-use plastic (SUP) consumption and waste, the relative roles of rationality and morality models in validating PB among rural and urban residents are not yet clear. In this empirical study, we compared the relative efficacy of two models for explaining people's SUP reduction behavior: the theory of planned behavior (TPB; rationality) and the value belief norm (VBN; morality). We investigated Thailand's rural (Sichang Island) and metropolitan (Nonthaburi city) areas. As a result, we surveyed people living on Sichang Island (n = 255) and in Nonthaburi city (n = 310). We employed structural equation modeling (SEM) for data analysis in this study. Findings showed that while morality better justified all the study participants' SUP reduction behavior, rationality underpinned behaviors of rural residents, while morality better explained the actions of city residents. We discussed future theoretical development and a policy roadmap based on these findings., (© 2024. The Author(s).)

Coolant oil from auto part manufacturing contains additives resulting in high chemical oxygen demand (COD) in wastewater. In this study, COD treatment of coolant oil was investigated in a metal-organic framework (MOF) with MIL-88A by a modified air-Fenton (MAF) process by varying synthetic coolant oil concentrations (1-5%), pH (3-9), air-flow rate (1-2 L/min), amount of MIL-88A (0.2-1.0 g), and reaction time (30-180 min). The results were analyzed using central composite design (CCD) and response surface methodology (RSM) using Minitab ver. 19. The characteristic MIL-88A was characterized by XRD that showed a spindle-like shape with 2θ at 10.2° and 13.0°. The FTIR spectrum revealed the vibrational frequencies at Fe-O (564 cm -1 ), C-O (1391 and 1600 cm -1 ), and C = O (1216 and 1710 cm -1 ). The optimum treatment efficiency was studied from 30 CCD conditions in the presence of coolant oil (5%, COD ~ 132,000 mg/L), pH (9), air flow rate (2 L/min), and MIL-88A (1 g) within 177 min. The results obtained from the experiment and the COD prediction were found to be 92.64% and 93.45%, respectively. The main mechanism of iron(III) in MIL-88A is proposed to be the production of hydroxyl radical (·OH) that oxidizes the organic matter in the coolant oil. Moreover, the MAF process was applied to the used industrial coolant oil and was found to be 62.59% efficient., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Food waste is rich in nutrients, such as nitrogen and phosphorus, and can be integrated with bioponics, a closed-loop agricultural system that combines hydroponics with biological nutrient recovery. Vermicompost leachate (VCL) supplementation has been shown to improve the co-composting of organic waste (i.e., compost quality) and the biodegradation of organic compounds. Thus, VCL has high potential for enhancing nutrient availability in bioponics from food waste. However, the understanding of nitrogen and phosphorus availability in food waste-based bioponics is limited, both with and without VCL. In this study, food waste derived from cafeteria vegetable waste was used as the substrate (500 g dry wt./system) in bioponics to grow lettuce (Lactuca sativa L.) for two consecutive cycles (35 days/cycle) without substrate replacement. VCL was applied weekly (1-5% v/v) and compared to the control without VCL. The results showed that the food waste in bioponics provided nitrogen and phosphorus for plant growth (15.5-65.8 g/lettuce head). Organic-degrading and nutrient-transforming bacteria (Hydrogenispora, Clostridium_sensu_stricto_1, Ruminiclostridium_1, Cellvibrio, Thauera, Hydrogenophaga, and Bacillus) were predominantly found in plant roots and residual food waste. VCL addition significantly increased nitrate, phosphate, and chemical oxygen demand levels in bioponics, owing to the nutrients in VCL and the enhancement of keystone microorganisms responsible for organic degradation and nutrient cycling (e.g., Ellin6067, Actinomyces, and Pirellula). These findings suggest that nitrogen, phosphorus, and organic carbon concentrations in an ecosystem of nutrient-transforming and organic-degrading microbes are key in managing nutrient recovery from food waste in bioponics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

In bioponics, although chicken manure is an efficient substrate for vegetable production and nitrogen recovery, it is often contaminated with high Cu and Zn levels, which could potentially cause bioaccumulation in plants and pose health risks. The objectives of this study were to assess nitrogen recovery in lettuce- and pak choi-based bioponics with Cu (50-150 mg/kg) and Zn (200-600 mg/kg) supplementation, as well as their bioaccumulation in plants, root microbial community, and health risk assessment. The supplementation of Cu and Zn did not affect nitrogen concentrations and plant growth (p > 0.05) but reduced nitrogen use efficiency. Pak choi showed higher Cu and Zn bioconcentration factors than lettuce. Bacterial genera Ruminiclostridium and WD2101&#95;soil&#95;group in lettuce roots and Mesorhizobium in pak choi roots from Cu and Zn supplemented conditions were significantly higher (p < 0.05) than controls, suggesting microbial biomarkers in plant roots from Cu and Zn exposure bioponics depended on plant type. Health risk assessment herein revealed that consumption of bioponic vegetables with Cu and Zn contamination does not pose long-term health risks (hazard index <1) to children or adults, according to the US EPA. This study suggested that vegetable produced from chicken manure-based bioponics has low health risk in terms of Cu and Zn bioaccumulation and could be applied in commercial-scale system for nutrient recovery from organic waste to vegetable production; however, health risk from other heavy metals and xenobiotic compounds must be addressed., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

This research investigated pyrolysis as a potential method to manage plastic waste in Sichang Island, Thailand. Pyrolysis was chosen to convert waste plastic into fuel oil using Al-Si catalysts derived from cogon grass. The study consisted of three stages. The first stage determined the composition of the waste plastics found in Sichang Island. High-density polyethylene (48%) comprised the highest proportion of the waste plastics, followed by low-density polyethylene (22%), polyethylene terephthalate (13%), polypropylene (10%), and polystyrene (7%). In the second stage, the Al-Si catalysts were prepared from cogon grass ( Imperata cylindrica (L.) Beauv) by treating it with acid and calcination. The optimum conditions to extract silica from cogon grass through acid treatment were heating at 700 °C for 2 h, which yielded 97.7% of amorphous silica with a surface area of 172 m 2 /g and a pore volume of 0.43 cc/g. This amorphous silica was combined with an aluminum precursor to form Al-Si catalysts with 20-80 wt% of Al-Si. The results showed that the surface area of the catalyst increased with increasing aluminum content. The optimum ratio was 60 wt% of Al-Si with a surface area of 200 m 2 /g. In the final stage, the catalytic properties of the previously prepared Al-Si catalysts in the pyrolysis of waste plastics were evaluated. The catalyst enhanced the plastic cracking process and the oil yield while decreasing the reaction time. The optimum ratio of 60% Al-Si to 10% waste plastic provided the maximum oil yield of 93.11% and the minimum reaction time of 20 min. The results showed that catalytic cracking with 60% Al-Si contributed to a high quantity of oil yield, similar to using a commercial Al-Si catalyst. The results of this research will be applied as an alternative method of recycling plastic for sustainable waste management in Sichang Island.

Raw water from the Bangkok (Thailand) main municipal water supply canal was examined for its natural organic composition by fractionation with adsorption resins. DAX-8 resin was the first resin employed to fractionate the hydrophobic fractions. Fractionation at neutral pH resulted in the separation of the hydrophobic neutral components; at a high pH level (approx. 10) separation of the hydrophobic base components occurred; and at a low pH level (approx. 2) the hydrophobic acid components were separated. AG-MP-50 cationic resin was then used to separate the hydrophilic base components, and WA-10, a weak anionic resin, was applied finally to fractionate the hydrophilic acid and neutral components. Subsequently, each fraction was tested for its chlorine disinfection by-product (DBP) formation potential. The HAA formation tests demonstrated that the various organic fractions had different reactivity levels for the formation of haloacetic acids (HAAs). For this source water, the hydrophilic neutral fraction dominated over the other five fractions in being the main organic component and the most significant precursor of HAAs formation. On the other hand, in terms of specific HAA formation potential (FP), the hydrophobic and hydrophilic base fractions were the most reactive precursors to the formation of HAAs. In all cases, the quantity of HAAs formed depended linearly upon the amount of organic constituents in the water sample.

The formation of haloacetic acids (HAAs) from the chlorination of individual and binary mixtures of organic fractions obtained from the intake of Bangkhen Water Treatment Plant in Bangkok, Thailand was investigated. Experimental results revealed that, as an individual fraction, hydrophobic base (HPOB) was the most active in forming HAAs (approx. 200 microg/mg) whereas hydrophilic acid (HPIA) was the least (approx. 40 microg/mg). In binary mixtures, acid fractions exhibited stronger inhibitory effect in forming HAAs than base fractions. With the set of experimental data obtained from this work, no relationships between specific HAA formation potential and various organic fractions concentrations in binary mixtures could be formulated. Among the various individual HAA species obtained from the chlorination of each individual organic fraction, dichloroacetic acid (DCAA) was found to be predominant. On the other hand, the chlorination of binary organic fraction mixtures often led to the formation of monochloroacetic acid (MCAA) as the predominant HAA species.

Resin adsorption techniques using three types of resin (DAX-8, AG-MP-50, and WA-10) were employed to characterize the raw water (RW) from the major 3 million m3/day (793 million gal/day) drinking water treatment plant in Bangkok, Thailand. The dissolved organic carbon (DOC) mass distribution sequences of the six organic fractions in raw water, from high to low, were hydrophilic neutral (HPIN), hydrophobic acid (HPOA), hydrophilic acid (HPIA), hydrophobic neutral (HPON), hydrophilic base (HPIB), and hydrophobic base (HPOB). HPIN and HPOA were the two main precursors for trihalomethanes formation (THMFP) in this water source following chlorination. The chlorination of HPON and HPIN fractions only led to the formation of mostly chloroform, while other organic fractions formed both chloroform and bromodichloromethane. The linear dependency between each organic fraction concentration and THMFP indicated that the reactions of each organic fraction with chlorine were first-order.

The fractionation of raw water from Bangkhen water treatment plant, Bangkok, Thailand revealed that the mass distribution sequence of the six organic fractions from high to low was hydrophilic neutral (HPIN), hydrophobic acid (HPOA), hydrophilic acid, hydrophobic neutral, hydrophilic base, and hydrophobic base. The main organic matter components in raw water were HPIN and HPOA, which were also the two most important contributors of trihalomethane formation potential (THMFP). Linear dependencies between the level of each organic fraction and the formation potential of THM species were observed, which suggested the reactions between the organic fraction and chlorine during the chlorination were first order. The fractionation led to a deviation of bromide concentration in each organic fraction from the original concentration, and this affected the formation of brominated THM species. However, this effect was demonstrated to be within an acceptable range. The chlorination of an individual organic fraction resulted in a higher level of THMFP than that of the raw water and mixed fractions, indicating an inhibitory effect between the organic species.