Search

A better understanding of the interaction between three phases is required when developing superconducting cables for high voltage AC systems. With a particular focus on the energy losses of real power transmission cables, in this paper we utilize the so-called H-formulation of Maxwell equations to devise a 2D model for superconducting triaxial cables. The major aim of this model is to comprehend and reproduce the experimental observations reported on the first triaxial prototype cable developed by SuperOx and VNIIKP. The computationally modelled and prototyped cable is made of up to 87 tapes of 4 mm width SuperOx tape arranged across the three phases. Our computational results are compared to the experimental measurements performed by VNIIKP with the electrical contact method, showing a high degree of accuracy over the outer phase of the cable, whilst revealing technical issues with the experimental measurements at the inner phases. Thus, in consultation with VNIIKP it has been concluded that for the actual experimental measurement of the AC losses at the inner phases, and consequently of the overall cable, a sophisticated calorimetric setup must be built. Still our model is capable to provide an independent assessment of the VNIIKP-SuperOx cable design, by investigating the magnetic profiles per phase in the time domain. In this sense, we confirm that the unbalanced arrange of currents and distancing between the phases affirmatively lead to no magnetic leakages, and therefore to an adequate balance of the cabling inductance., Comment: 9 pages, 3 figures, CEC/ICMC'21 Conference, IOP Conference Series: Materials Science and Engineering, Advances in Cryogenic Engineering (Accepted, Ref. M3Po1A-03, 11 January 2022)

The Conductor on Rounded Core (CORC) cables manufactured by Advanced Conductor Technologies with current densities beyond 300 Amm^-2 at 4.2 K, and bending diameter of up to 3.5 cm, are considered as one of the strongest candidates for the next generation of high field power applications and magnets. In this paper, we present a full 3D FEM model for their monolayer and bilayer CORC cables made with up to three and six superconducting tapes respectively, disclosing the full curve of AC losses for the monolayer cable at magnetic fields beyond 60 mT, and the actual distribution of current density along and across the thickness of the superconducting tapes in both designs. The model is based on the so-called H-formulation, allowing to incorporate the true three-dimensionality of the tapes without recurring to 2D thin-film approaches where non-physical surface currents that do not follow the celebrated Bean's model for type-II superconductors appear. Likewise, good agreement with the experimentally measured AC-losses for the monolayer and bilayer cable have been obtained, with all the details of the model disclosed in this paper., Comment: Manuscript Accepted at IEEE Transactions on Applied Superconductivity 18 January 2022. Submitted 20 September 2021. his work was supported by the UK Research and Innovation, Engineering and Physical Sciences Research Council (EPSRC), through the grant Ref. EP/S025707/1 led by H.S.R

Conductor on a rounded core (CORC\textsuperscript{\textregistered}) cables with current densities beyond 300 A/mm$^{-2}$ at 4.2 K, and a capacity to retain around 90 $\%$ of critical current after bending to a diameter of 3.5 cm, make them a strong candidate for high field power applications and magnets. In this paper, we present a full 3D-FEM model based upon the so-called H-formulation for commercial CORC\textsuperscript{\textregistered} cables manufactured by Advanced Conductor Technologies LLC. The model presented consists of tapes ranging from 1 up to 3 SuperPower 4mm-width tapes in 1 single layer and at multiple pitch angles. By varying the twist pitch, local electromagnetic characteristics such as the current density distribution along the length and width are visualized. Measurements of macroscopical quantities such as AC-losses are disclosed in comparison with available experimental measurements. We particularly focused on the influence of the twist pitch by comparing the efficiency and performance of multiple cables, critically assessing the optimal twist pitch angle., Comment: 9 pages, 3 figures, CEC/ICMC'21 Conference, IOP Conference Series: Materials Science and Engineering, Advances in Cryogenic Engineering

In recent years, numerical models have become popular and powerful tools to investigate the electromagnetic behavior of superconductors. One domain where this advances are most necessary is the 3D modeling of the electromagnetic behavior of superconductors. For this purpose, a benchmark problem consisting of superconducting cube subjected to an AC magnetic field perpendicular to one of its faces has been recently defined and successfully solved. In this work, a situation more relevant for applications is investigated: a superconducting parallelepiped bulk with the magnetic field parallel to two of its faces and making an angle with the other one without and with a further constraint on the possible directions of the current. The latter constraint can be used to model the magnetization of a stack of high-temperature superconductor tapes, which are electrically insulated in one direction. For the present study three different numerical approaches are used: the Minimum Electro-Magnetic Entropy Production (MEMEP) method, the $H$-formulation of Maxwell's equations and the Volume Integral Method (VIM) for 3D eddy currents computation. The results in terms of current density profiles and energy dissipation are compared, and the differences in the two situations of unconstrained and constrained current flow are pointed out. In addition, various technical issues related to the 3D modeling of superconductors are discussed and information about the computational effort required by each model is provided. This works constitutes a concrete result of the collaborative effort taking place within the HTS numerical modeling community and will hopefully serve as a stepping stone for future joint investigations.

Superconducting bulks, acting as high-field permanent magnets, are promising for many applications. An important effect in bulk permanent magnets is crossed-field demagnetization, which can reduce the magnetic field in superconductors due to relatively small transverse fields. Crossed-field demagnetization has not been studied in sample shapes such as rectangular prisms or cubes. This contribution presents a study based on both 3D numerical modelling and experiments. We study a cubic Gd-Ba-Cu-O bulk superconductor sample of size 6 mm magnetized by field cooling in an external field of around 1.3 T, which is later submitted to crossed-field magnetic fields of up to 164 mT. Modelling results agree with experiments, except at transverse fields 50\% or above of the initial trapped field. The current paths present a strong 3D nature. For instance, at the mid-plane perpendicular to the initial magnetizing field, the current density in this direction changes smoothly from the critical magnitude, ${J_c}$, at the lateral sides to zero at a certain penetration depth. This indicates a rotation of the current density with magnitude ${J_c}$, and hence force free effects like flux cutting are expected to play a significant role., Comment: 13 pages; 9 figures

HTS are feasible for hight power applications because of the smaller consumption demand of the cooling system in comparison to the whole power device. Real industral devices contain superconductors with 2D and 3D geometry (coated conductors tapes represent an example of 2D geometry, since the superconducting layer is very thin). In order to know the feasibility and the optimum design of a certain device, there is a need of software tools. These Numerical tools have hight requirements like fast computation, a physical model for any E(J) relation of the superconductor and any complex geometry such as coils, motors and generators, where E is the electric field and J is the current density. In this work we present a 3D variational model based on a functional that restricts the problem in the superconductor volume. We show the magnetization process of a thin film and a 3D bulk sample. We compare our model of the thin film geometry with the thin film formula, reaching a good agreement. We also compare a striated tape, where the filaments are connected by linear material, with a FEM model. We present several results for a thin film with constant critical current density, Jc, magnetic-field dependent Jc, and an anisotropic E(J) relation. For the latter, E is not parallel to J when the magnetic flux density is not perpendicular to J (force free situation). The last studied situation is the 3D cubic sample. We find the time dependence of the current density and AC loss for each situation. In the cubic bulk sample, we found a non-negligible component of the current density in the direction of the applied field. The presented numerical method is very promising for 3D modeling of superconducting samples and power applications., Comment: 51 pages, PhD thesis as submitted; supervisor: Enric Pardo