Search

The cheap non-noble Cu–SiO2-based nanocatalysts are under intensive study in different reactions resulting in useful chemicals, yet their application in environment protection is poorly studied. In the present work, the influence of the Cu loading (3–15 wt%) on the catalytic behavior of Cu/SiO2 materials was first precisely studied in the hydrogenation of hazardous trinitrobenzene to valuable aromatic amines with molecular hydrogen. The catalysts have been synthesized by the method of deposition–precipitation using urea. The catalyst characterization by XRD, TPR-H2, SEM, TEM, and N2 adsorption methods confirmed that they include nanoparticles of the micro-mesoporous chrysocolla-like phase supported in the mesopores of a commercial SiO2 carrier, as well as revealed formation of the highly dispersed CuO phase in the sample with the highest Cu loading. Variation in reaction conditions showed the optimal ones (170 °C, 1.3 MPa H2) resulting in complete trinitrobenzene conversion with a triaminobenzene yield of 65% for the catalyst with a 15% Cu loading, and the best yield of 82% was obtained over the catalyst with 10% Cu calcined at 600 °C. The results show the potential of Cu phyllosilicate-based catalysts for the utilization of trinitroaromatic compounds via catalytic hydrogenation to amines and their possible applications in a remediation treatment system. [ABSTRACT FROM AUTHOR]

[Display omitted] For the first time, kinetic data on the decomposition of N 2 O over mixed oxide LaCoO 3 with a perovskite structure have been obtained. Bulk LaCoO 3 synthesized using microwave activation exhibited an increased intrinsic reaction rate with a 30 kJ mol–1 lower activation energy. Perovskite samples supported on ZrO 2 -La demonstrated lower intrinsic reaction rates due to the lower content of the LaCoO 3 phase, but the activation energies were also lower by 50–80 kJ mol–1. [ABSTRACT FROM AUTHOR]

Novel reactive materials for catalytic degradation of chlorinated organic compounds in water at ambient conditions have been prepared on the basis of silica-supported Pd-Fe nanoparticles. Nanoscale Fe-Pd particles were synthesized inside porous silica supports using (NH4)3[Fe(C2O4)3] and [Pd(NH3)4]Cl2 or Pd acetate as reaction precursors. According to temperature programmed reduction (TPR) studies, Pd introduction decreased the reduction temperature of the supported Fe n+ species and nearly complete reduction with H2 was observed at 400 °C. The successful surface loading with Pd was confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Characterization of the samples by X-ray diffraction (XRD) and X-ray absorption near-edge structure + extended X-ray absorption fine structure (XANES + EXAFS) verified the presence of highly dispersed Pd0, Pd x Fe1- x and Fe0 phases. Reduction of the supported precursors in hydrogen resulted in materials that were highly active in perchloroethene (PCE) degradation and 2-chlorobiphenyl (2-ClBP) dechlorination. It was found that highly dispersed amorphous Fe-Pd bimetallic nanoparticles on silica support showed superior catalytic activity against PCE dechlorination in comparison to the free-standing Fe-Pd nanoparticles. For the samples with the same Fe content, the conversion of chlorinated organics as well as the stability increased with the Pd loading, e.g., the most effective degradation of PCEs and 2-ClBP was achieved at a Pd loading of 2.3-3.2 wt. %. [ABSTRACT FROM AUTHOR]

In this study, novel SiO2- and Al2O3-supported Cu-Fe catalysts are developed for selective hydrogenation of 2-methyl-3-butyne-2-ol to 2-methyl-3-butene-2-ol under mild reaction conditions. TEM, XRD, and FTIR studies of adsorbed CO and TPR-H2 are performed to characterize the morphology, nanoparticle size, and particle distribution, as well as electronic state of deposited metals in the prepared catalysts. The deposition of Fe and Cu metal particles on the aluminum oxide carrier results in the formation of a mixed oxide phase with a strong interaction between the Fe and Cu precursors during the calcination. The highly dispersed nanoparticles of Fe2O3 and partially reduced CuOx, with an average size of 3.5 nm and with strong contact interactions between the metals in 5Cu-5Fe/Al2O3 catalysts, provide a high selectivity of 93% toward 2-methyl-3-butene-2-ol at complete conversion of the unsaturated alcohol. [ABSTRACT FROM AUTHOR]

The bimetallic Crn+/Pd0 nanoparticles have been synthesized for the first time by a two-step redox method. The method includes the deposition of Pd0 nanoparticles on the surface of SiO2 and TiO2 carriers followed by the deposition of Crn+ on the surface of Pd0 nanoparticles using the redox procedures, which are based on the catalytic reduction of Crn+ with H2 in aqueous suspensions at ambient conditions. Transmission (TEM) and scanning (SEM) electron microscopy, X-ray photoelectron spectroscopy (XPS), Fourie-transformed infrared spectroscopy of adsorbed CO (FTIR-CO), and CO chemisorption studies were performed to characterize the morphology, nanoparticle size, element, and particle distribution, as well as the electronic state of deposited metals in the obtained catalysts. A decrease in nanoparticle size from 22 nm (Pd/SiO2) to 2–6 nm (Pd/TiO2) makes possible deposition of up to 1.1 wt.% Cr most likely as Cr3+. The deposition of CrOx species on the surface of Pd nanoparticles was confirmed using FTIR of adsorbed CO and the method of temperature-programmed reduction with hydrogen (TPR-H2). The intensive hydrogen consumption in the temperature ranges from −50 °C to 40 °C (Cr/Pd/SiO2) and from −90 °C to −40 °C (Cr/Pd/TiO2) was first observed for the supported Pd catalysts. The decrease in the temperature of β-PdHx decomposition indicates the strong interaction between the deposited Crn+ species and Pd0 nanoparticle after reduction with H2 at 500 °C. The novel Crn+/Pd/TiO2 catalysts demonstrated a considerably higher activity in selective hydrogenation of phenylacetylene than the Pd/TiO2 catalyst at ambient conditions. [ABSTRACT FROM AUTHOR]

The nonoxidative conversion of ethanol to acetaldehyde under thermal and microwave heating was studied on mixed oxide ZnO-CuO-SiO2 catalysts modified with additives of tungsten carbide nanoparticles. The results revealed that the WC-modified catalyst exhibited superior activity and selectivity under microwave heating conditions. It is assumed that when microwave heating is used, hot zones can appear at the contact points of WC nanoparticles and active centers of the mixed oxide ZnO-CuO-SiO2 catalyst, which intensively absorb microwave energy, allowing the more efficient formation of acetaldehyde at moderate temperatures. Thermodynamic calculations of equilibrium concentrations of reagents and products allowed us to identify the optimal conditions for effective acetaldehyde production. The initial catalyst and the catalyst prepared by the coprecipitation of the oxides with the addition of WC were characterized by physicochemical methods (TPR-H2, XRD, DRIFTS of adsorbed CO). The active centers of the oxide catalyst can be Cu+ cations. [ABSTRACT FROM AUTHOR]