1,001 results on '"Karimipour, Arash"'
Search Results
2. Developing a Novel Hybrid Nanofluid Preparation Method Using the Droplet Generation Method: Predicting the Thermal Conductivity, Viscosity, and Magnetic Properties Compared to the Conventional Two-Step Method
3. Experimental Study to Improve the Hydrodynamic and Thermal Efficiencies of a Cross-Flow Car Radiator Using a New Prepared Hybrid Nanofluid Composed of Graphene Oxide and Silicon Oxide Nanoparticles Dispersed in Water–Ethylene Glycol Fluid
4. Correction: Investigation of free convection heat transfer and entropy generation of nanofluid flow inside a cavity affected by magnetic field and thermal radiation
5. Investigating the effects of chitosan atomic ratio and drug type on mechanical properties of silica aerogel/chitosan nanocomposites using molecular dynamics approach
6. Simulating non-Newtonian fluid free convection heat transfer through the meshless method
7. Investigation the effect of dissimilar laser welding parameters on temperature field, mechanical properties and fusion zone microstructure of inconel 600 and duplex 2205 stainless steel via response surface methodology
8. Application extension of the meshless local Petrov-Galerkin method: Non-Newtonian fluid flow implementations
9. The effect of external heat flux on the phase change materials composed of two phase water/PCM-graphene nanofluid in a copper nanochannel
10. Analysis of the Non-Newtonian Behavior and Viscosity of GNSs-CuO/Liquid EG Hybrid Nanofluid: An Experimental and Feed-Forward ANN Study
11. Numerical investigation of two-phase Al2O3 nanofluid in a microchannel equipped with bump through slip flow
12. Investigation on the size and percentage effects of magnesium nanoparticles on thermophysical properties of reinforced calcium phosphate bone cement by molecular dynamic simulation
13. Retraction notice to “Increasing electricity generation—Installing photovoltaic cells coupled to a battery pack, to provide the electricity” [J. Energy Storage 54 (2022) 105264]
14. Retraction notice to “Numerical Crank-Nicolson transient thermal analysis of a single U-tube vertical ground battery borehole heat exchanger filled with the phase change material” [J. Energy Storage 53 (2022) 105119]
15. Retraction notice to “The investigation of battery thermal management via effects of using phase change materials in the oval packages around the lithium-ion battery cells with an airflow” [J. Energy Storage 53 (2022) 105105]
16. The thermal performance and mechanical stability of methacrylic acid porous hydrogels in an aqueous medium at different initial temperatures and hydrogel volume fraction using the molecular dynamics simulation
17. Computational thermal performance analysis by LBM for cooling a hot oval object via magnetohydrodynamics non-Newtonian free convection by using magneto-ferrofluid
18. Simulation of nanofluid flow in a solar panel cooling system to investigate the panel's electrical-thermal efficiency with artificial neural network
19. The effects of atomic percentage and size of Zinc nanoparticles, and atomic porosity on thermal and mechanical properties of reinforced calcium phosphate cement by molecular dynamics simulation
20. Experimental Study of Pool Boiling Heat Transfer Coefficient for DI-Water-Based Nanofluids Containing Nickel Oxide in a Constant Magnetic Field
21. Phase change process in a porous Carbon-Paraffin matrix with different volume fractions of copper oxide Nanoparticles: A molecular dynamics study
22. Retraction notice to “Influence of magnetized water and water/cement ratio on the properties of untreated coal fine aggregates concrete” [Cement Concr. Compos. 122 (September 2021) 104121]
23. Fabrication and characterization of synthesized hydroxyapatite/ethanolamine for bone tissue engineering application
24. Effect of lithium-ion batteries on heating a residential building using PCM: Changing the horizontal distance between batteries
25. Reducing electricity demand by integrating a sustainable pack into HVAC- adding PCM in sustainable pack as well as building envelopes
26. Thermal analysis of battery cells placed in triangular enclosures filled with PCM in the presence of forced airflow in an air duct
27. Using PCM for building energy management to postpone the electricity demand peak load and approving a new PID controller to activate alternative chiller
28. Numerical and experimental study of thermal efficiency of a spiral flat plate solar collector by changing the spiral diameter, flow rate, and pipe diameter
29. Introducing a new PID controller to control the addition of PCM to the building with ventilation heat recovery installation to reduce the energy demand of the cooling system
30. Using proportional-integral-derivative controllers and PCM and a new design of building air intake with five scenarios to present a multi-zone CAV-AHU for tackling high energy consumption
31. Thermal systems energy optimization employing two independent circuits of double vertical ground U-tube with PCM as the backfill material for building
32. Fabrication and characterization of nanocrystalline hydroxyapatite reinforced with silica-magnetite nanoparticles with proper thermal conductivity
33. Atomic coatings effects on the combustion of aluminium hydride nanoparticles dispersed in liquid oxygen: Molecular dynamics simulation for the oxygenated environments
34. Numerical study of the cooling effect of a PVT on its thermal and electrical efficiency using a Cu tube of different diameters and lengths
35. The effects of initial temperature and pressure on the mechanical properties of reinforced calcium phosphate cement with magnesium nanoparticles: A molecular dynamics approach
36. Effects of various temperature and pressure initial conditions to predict the thermal conductivity and phase alteration duration of water based carbon hybrid nanofluids via MD approach
37. Examining the effects of interior setpoint temperature on phase change materials usefulness through a performing annual analysis in the air handling units: A building energy management study
38. Low cost and eco-friendly building materials derived from wastes: Combined effects of bottom ash and water treatment sludge
39. The Molecular Dynamics study of atomic structure behavior of LL-37 peptide as the antimicrobial agent, derived from the human cathelicidin, inside a nano domain filled by the aqueous environment
40. The investigation of Fe3O4 atomic aggregation in a nanochannel in the presence of magnetic field: Effects of nanoparticles distance center of mass, temperature and total energy via molecular dynamics approach
41. Water molecules adsorption by a porous carbon matrix in the presence of NaCl impurities using molecular dynamic simulation
42. An experimental study on the cooling efficiency of magnetite–water nanofluid in a twisted tube exposed to a rotating magnetic field
43. Water–copper nanofluid flow in flat and ribbed microchannels: numerical modeling and optimization
44. The effect of sedimentation phenomenon of the additives silver nano particles on water pool boiling heat transfer coefficient: A comprehensive experimental study
45. Experimental and numerical model for mechanical properties of concrete containing fly ash: Systematic review
46. Phase change material dependency on solar power plant building through examination of energy-saving
47. Mixed thermomagnetic convection of ferrofluid in a porous cavity equipped with rotating cylinders: LTE and LTNE models
48. Application of rotating circular obstacles in improving ferrofluid heat transfer in an enclosure saturated with porous medium subjected to a magnetic field
49. Development of the ANN–KIM composed model to predict the nanofluid energetic thermal conductivity via various types of nano-powders dispersed in oil
50. Develop a numerical approach of fuzzy logic type-2 to improve the reliability of a hydraulic automated guided vehicles
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.