Search

Realization of efficient spin-orbit torque switching of the N\'eel vector in insulating antiferromagnets is a challenge, often complicated by spurious effects. Quantifying the spin-orbit torques in antiferromagnet/heavy metal heterostructures is an important first step towards this goal. Here, we employ magneto-optic techniques to study damping-like spin-orbit torque (DL-SOT) in a-plane $\alpha$-Fe$_2$O$_3$ (hematite) with a Pt spin-orbit overlayer. We find that the DL-SOT efficiency is two orders of magnitude larger than reported in c- and r-plane hematite/Pt using harmonic Hall techniques. The large magnitude of DL-SOT is supported by direct imaging of current-induced motion of antiferromagnetic domains that happens at moderate current densities. Our study introduces a new method for quantifying spin-orbit torque in antiferromagnets with a small canted moment and identifies a-plane $\alpha$-Fe$_2$O$_3$ as a promising candidate to realize efficient SOT switching., Comment: 6 pages, 3 figures

The quasi-two-dimensional magnetic topological insulator MnBi$_2$Se$_4$, stabilized via non-equilibrium molecular beam epitaxy, is investigated by resonant soft x-ray scattering. Kiessig fringes are observed, confirming a high sample quality and a thin film thickness of 10 septuple layers ($\sim$13 nm). An antiferromagnetic Bragg peak is observed at the structurally forbidden reflection, whose magnetic nature is validated by studying its temperature, energy, and polarization dependence. Through a detailed analysis, an A-type antiferromagetic order with in-plane moments is implied. This alternative spin structure in MnBi$_2$Se$_4$, in contrast to the Ising antiferromagnetic states in other magnetic topological insulators, might be relevant for hosting new topological states.

The transport of spin currents across interfaces is relatively well studied, while the transport properties of orbital currents are just starting to be examined. In Cr/Ni bilayers, the spin-orbit torque (SOT) due to the orbital current generated in the Cr layer is believed to dominate over torques of other origins. In this work, we study SOT in Cr/X/Ni trilayers, where X is an ultra-thin spacer of a different material. Using the SOT as a proxy for the orbital current transferred from the Cr to the Ni layer, we compare Cr/X/Ni results to Pt/X/Ni, the system in which spin current generated in the Pt layer plays a dominant role. We find that across 12 different spacers the apparent interface transparency to the orbital current is comparable or larger than to the spin current.

Kagome lattices have garnered substantial interest because their band structure consists of topological flat bands and Dirac cones. The RMn$_6$Sn$_6$ (R = rare earth) compounds are particularly interesting because of the existence of large intrinsic anomalous Hall effect (AHE) which originates from the gapped Dirac cones near the Fermi level. This makes RMn$_6$Sn$_6$ an outstanding candidate for realizing the high-temperature quantum anomalous Hall effect. The growth of RMn$_6$Sn$_6$ thin films is beneficial for both fundamental research and potential applications. However, most of the studies on RMn$_6$Sn$_6$ have focused on bulk crystals so far, and the synthesis of RMn$_6$Sn$_6$ thin films has not been reported so far. Here we report the atomic layer molecular beam epitaxy growth, structural and magnetic characterizations, and transport properties of ErMn$_6$Sn$_6$ and TbMn$_6$Sn$_6$ thin films. It is especially noteworthy that TbMn$_6$Sn$_6$ thin films have out-of-plane magnetic anisotropy, which is important for realizing the quantum anomalous Hall effect. Our work paves the avenue toward the control of the AHE using devices patterned from RMn$_6$Sn$_6$ thin films., Comment: 7 pages, 4 figures

Heterostructures of two-dimensional (2D) van der Waals (vdW) magnets and topological insulators (TI) are of substantial interest as candidate materials for efficient spin-torque switching, quantum anomalous Hall effect, and chiral spin textures. However, since many of the vdW magnets have Curie temperatures below room temperature, we want to understand how materials can be modified to stabilize their magnetic ordering to higher temperatures. In this work, we utilize molecular beam epitaxy to systematically tune the Curie temperature ($T_C$) in thin film Fe$_3$GeTe$_2$/Bi$_2$Te$_3$ from bulk-like values ($\sim$220 K) to above room temperature by increasing the growth temperature from 300 $^\circ$C to 375 $^\circ$C. For samples grown at 375 $^\circ$C, cross-sectional scanning transmission electron microscopy (STEM) reveals the spontaneous formation of different Fe$_m$Ge$_n$Te$_2$ compositions (e.g. Fe$_5$Ge$_2$Te$_2$ and Fe$_7$Ge$_6$Te$_2$) as well as intercalation in the vdW gaps, which are possible origins of the enhanced Curie temperature. This observation paves the way for developing various Fe$_m$Ge$_n$Te$_2$/TI heterostructures with novel properties., Comment: 8 pages, 4 figures

Spintronic, spin caloritronic, and magnonic phenomena arise from complex interactions between charge, spin, and structural degrees of freedom that are challenging to model and even more difficult to predict. This situation is compounded by the relative scarcity of magnetically-ordered materials with relevant functionality, leaving the field strongly constrained to work with a handful of well-studied systems that do not encompass the full phase space of phenomenology predicted by fundamental theory. Here we present an important advance in this coupled theory-experiment challenge, wherein we extend existing theories of the spin Seebeck effect (SSE) to explicitly include the temperature-dependence of magnon non-conserving processes. This expanded theory quantitatively describes the low-temperature behavior of SSE signals previously measured in the mainstay material yttrium iron garnet (YIG) and predicts a new regime for magnonic and spintronic materials that have low saturation magnetization, $M_S$, and ultra-low damping. Finally, we validate this prediction by directly observing the spin Seebeck resistance (SSR) in the molecule-based ferrimagnetic semiconductor vanadium tetracyanoethylene (V[TCNE]$_x$, $x \sim 2$). These results validate the expanded theory, yielding SSR signals comparable in magnitude to YIG and extracted magnon diffusion length ($\lambda_m>1$ $\mu$ m) and magnon lifetime for V[TCNE]$_x$ ($\tau_{th}\approx 1-10$ $\mu$ s) exceeding YIG ($\tau_{th}\sim 10$ ns). Surprisingly, these properties persist to room temperature despite relatively low spin wave stiffness (exchange). This identification of a new regime for highly efficient SSE-active materials opens the door to a new class of magnetic materials for spintronic and magnonic applications.

Systems with flat bands are ideal for studying strongly correlated electronic states and related phenomena. Among them, kagome-structured metals such as CoSn have been recognized as promising candidates due to the proximity between the flat bands and the Fermi level. A key next step will be to realize epitaxial kagome thin films with flat bands to enable tuning of the flat bands across the Fermi level via electrostatic gating or strain. Here we report the band structures of epitaxial CoSn thin films grown directly on insulating substrates. Flat bands are observed using synchrotron-based angle-resolved photoemission spectroscopy (ARPES). The band structure is consistent with density functional theory (DFT) calculations, and the transport properties are quantitatively explained by the band structure and semiclassical transport theory. Our work paves the way to realize flat band-induced phenomena through fine-tuning of flat bands in kagome materials., Comment: 30 pages, 12 figures

The orbital Hall effect has been theoretically predicted but its direct observation is a challenge. Here, we report the magneto-optical detection of current-induced orbital accumulation at the surface of a light 3$d$ transition metal, Cr. The orbital polarization is in-plane, transverse to the current direction, and scales linearly with current density, consistent with the orbital Hall effect. Comparing the thickness-dependent magneto-optical measurements with $\textit{ab initio}$ calculations, we estimate an orbital diffusion length in Cr of $6.6\pm 0.6$ nm., Comment: 6 pages, 5 figures

Magnetic multilayers are a promising platform for storage and logic devices based on skyrmion spin textures, due to the large materials phase space for tuning properties. Epitaxial superlattice structures of [Pt/Co/Cu]n thin films were grown by molecular beam epitaxy at room temperature. Spin-polarized scanning tunneling microscopy (SP-STM) of these samples was used to probe the connection between surface structure and skyrmion morphology with nanoscale spatial resolution. Irregular-shaped skyrmion bubbles were observed, with effective diameters from 20-200 nm that are much larger than the nanoscale grain structure of the surface topography. Nucleation, annihilation, and motion of skyrmion bubbles could be driven using the stray field of the ferromagnetic tip in repeated imaging, and spin-polarized current/voltage pulses. Our detailed comparison of STM topography and differential conductance images shows that there are no surface defects or inhomogeneities at length scales that could account for the range in skyrmion bubble size or shape observed in the measurements., Comment: 11 pages, 5 figures

Introducing magnetism to the surface state of topological insulators, such as Bi2Te3, can lead to a variety of interesting phenomena. We use scanning tunneling microscopy (STM) to study a single quintuple layer (QL) of the van der Waals magnet Fe3GeTe2 (FGT) that is grown on Bi2Te3 via molecular beam epitaxy. STM topographic images show that the FGT grows as free-standing islands on Bi2Te3 and outwards from Bi2Te3 steps. Atomic resolution imaging shows atomic lattices of 390 +- 10 pm for FGT and 430 +- 10 pm for Bi2Te3, consistent with the respective bulk crystals. A moir\'e pattern is observed on FGT regions with a periodicity of 4.3 +- 0.4 nm that can be attributed solely to this lattice mismatch and thus indicates zero rotational misalignments. While most of the surface is covered by a single QL of the FGT, there are small double QL regions, as well as regions with distinct chemical terminations due to an incomplete QL. The most common partial QL surface termination is the FeGe layer, in which the top two atomic layers are missing. This termination has a distinctive electronic structure and a (sqrt3 x sqrt3)R30 reconstruction overlaid on the moir\'e pattern in STM images. Magnetic circular dichroism (MCD) measurements confirm these thin FGT films are ferromagnetic with TC ~190 K., Comment: 12 pages, 5 figures

Creating materials that do not exist in nature can lead to breakthroughs in science and technology. Magnetic skyrmions are topological excitations that have attracted great attention recently for their potential applications in low power, ultrahigh density memory. A major challenge has been to find materials that meet the dual requirement of small skyrmions stable at room temperature. Here we meet both these goals by developing epitaxial FeGe films with excess Fe using atomic layer molecular beam epitaxy (MBE) far from thermal equilibrium. Our novel atomic layer design permits the incorporation of 20% excess Fe while maintaining a non-centrosymmetric crystal structure supported by theoretical calculations and necessary for stabilizing skyrmions. We show that the Curie temperature is well above room temperature, and that the skyrmions probed by topological Hall effect have sizes down to 15 nm as imaged by Lorentz transmission electron microscopy (LTEM) and magnetic force microscopy (MFM). Our results illustrate new avenues for creating artificial materials tailored at the atomic scale that can impact nanotechnology., Comment: 22 figures, 34 pages

Magnetic skyrmions are promising for next-generation information storage and processing owing to their potential advantages in data storage density, robustness, and energy efficiency. The magnetic multilayers consisting of Pt, Co, and a third metal element $X$ provide an ideal platform to study the skyrmions due to their highly tunable magnetic properties. Here, we report the observation of room-temperature bubble-like N\'eel skyrmions in epitaxial Pt/Co/Cu multilayers in samples with multidomain states in zero field. The magneto-optic Kerr effect (MOKE) and superconducting quantum interference device (SQUID) magnetometry are applied to investigate the shapes of the hysteresis loops, the magnetic anisotropy, and the saturation magnetization. By tuning the Co thickness and the number of periods, we achieve perpendicular and in-plane magnetized states and multidomain states that are identified by a wasp-waisted hysteresis loop. Skyrmions are directly imaged by magnetic force microscopy (MFM) and Lorentz transmission electron microscopy (LTEM). The development of room-temperature skyrmions in Pt/Co/Cu multilayers may lead to advances in skyrmion-related research and applications., Comment: 11 pages, 6 Figures

Magnetic materials with kagome crystal structure exhibit rich physics such as frustrated magnetism, skyrmion formation, topological flat bands, and Dirac/Weyl points. Until recently, most studies on kagome magnets have been performed on bulk crystals or polycrystalline films. Here we report the atomic layer molecular beam epitaxy synthesis of high-quality thin films of topological kagome magnet Fe${_3}$Sn${_2}$. Structural and magnetic characterization of Fe${_3}$Sn${_2}$ on epitaxial Pt(111) identifies highly ordered films with c-plane orientation and an in-plane magnetic easy axis. Studies of the local magnetic structure by anomalous Nernst effect imaging reveals in-plane oriented micrometer size domains. Superlattice structures consisting of Fe${_3}$Sn${_2}$ and Fe${_3}$Sn are also synthesized by atomic layer molecular beam epitaxy, demonstrating the ability to modulate the sample structure at the atomic level. The realization of high-quality films by atomic layer molecular beam epitaxy opens the door to explore the rich physics of this system and investigate novel spintronic phenomena by interfacing Fe${_3}$Sn${_2}$ with other materials., Comment: 8 pages, 5 figures. arXiv admin note: substantial text overlap with arXiv:2105.12203

Coupling between exciton states across the Brillouin zone in monolayer transition metal dichalcogenides can lead to ultrafast valley depolarization. Using time- and angle-resolved photoemission, we present momentum- and energy-resolved measurements of exciton coupling in monolayer WS$_2$. By comparing full 4D ($k_x, k_y, E, t$) data sets after both linearly and circularly polarized excitation, we are able to disentangle intervalley and intravalley exciton coupling dynamics. Recording in the exciton binding energy basis instead of excitation energy, we observe strong mixing between the B$_{1s}$ exciton and A$_{n>1}$ states. The photoelectron energy and momentum distributions observed from excitons populated via intervalley coupling (e.g. K$^-$ $\rightarrow$ K$^+$) indicate that the dominant valley depolarization mechanism conserves the exciton binding energy and center-of-mass momentum, consistent with intervalley Coulomb exchange. On longer timescales, exciton relaxation is accompanied by contraction of the momentum space distribution., Comment: 16 pages: 8 pages main text with 5 figures, 8 pages SI with 6 figures

We demonstrate that kinetics play an important role in the epitaxial growth of Fe$_3$GeTe$_2$ (FGT) van der Waals (vdW) ferromagnetic films by molecular beam epitaxy. By varying the deposition rate, we control the formation or suppression of an initial tellurium-deficient non-van der Waals phase (Fe$_3$Ge$_2$) prior to realizing epitaxial growth of the vdW FGT phase. Using cross-sectional scanning transmission electron microscopy and scanning tunneling microscopy, we optimize the FGT films to have atomically smooth surfaces and abrupt interfaces with the Ge(111) substrate. The magnetic properties of our high quality material are confirmed through magneto-optic, magnetotransport, and spin-polarized STM studies. Importantly, this demonstrates how the interplay of energetics and kinetics can help tune the re-evaporation rate of chalcogen atoms and interdiffusion from the underlayer, which paves the way for future studies of van der Waals epitaxy., Comment: 18 pages, 4 figures

The large variety of 2D materials and their co-integration in van der Waals (vdW) heterostructures enable innovative device engineering. In addition, their atomically-thin nature promotes the design of artificial materials by proximity effects that originate from short-range interactions. Such a designer approach is particularly compelling for spintronics, which typically harnesses functionalities from thin layers of magnetic and non-magnetic materials and the interfaces between them. Here, we overview recent progress on 2D spintronics and opto-spintronics using vdW heterostructures. After an introduction to the forefront of spin transport research, we highlight the unique spin-related phenomena arising from spin-orbit and magnetic proximity effects. We further describe the ability to create multi-functional hybrid heterostructures based on vdW materials, combining spin, valley and excitonic degrees of freedom. We end with an outlook on perspectives and challenges for the design and production of ultra-compact all-2D spin devices and their potential applications in conventional and quantum technologies., Comment: Review article. 39 pages, 5 figures, 2 tables. Full-text access at the SharedIt link https://rdcu.be/cpbSv

Magnetic materials with kagome crystal structure exhibit rich physics such as frustrated magnetism, skyrmion formation, topological flat bands, and Dirac/Weyl points. Until recently, most studies on kagome magnets have been performed on bulk crystals or polycrystalline films. Here we report the synthesis of high-quality epitaxial films of topological kagome magnet Fe$_3$Sn$_2$ by atomic layer molecular beam epitaxy. Structural and magnetic characterization of Fe$_3$Sn$_2$ on epitaxial Pt(111) identifies highly ordered films with c-plane orientation and an in-plane magnetic easy axis. Studies of the local magnetic structure by anomalous Nernst effect imaging reveals in-plane oriented micrometer size domains. The realization of high-quality films by atomic layer molecular beam epitaxy opens the door to explore the rich physics of this system and investigate novel spintronic phenomena by interfacing Fe$_3$Sn$_2$ with other materials., Comment: 6 pages, 5 figures

Metal and magnetic overlayers alter the surface of the topological insulator (TI) bismuth selenide (Bi$_2$Se$_3$) through proximity effects but also by changing the composition and chemical structure of the Bi$_2$Se$_3$ sub-surface. The interface between Bi$_2$Se$_3$ and Mn metal or manganese selenide was explored using x-ray photoelectron spectroscopy (XPS) revealing chemical and electronic changes at the interface. Depositing Mn metal on Bi$_2$Se$_3$ without an external source of Se shows unexpected bonding within the Mn layer due to Mn-Se bonding as Se diffuses out of the Bi$_2$Se$_3$ layer into the growing Mn film. The Se out-diffusion is further evidenced by changes in Bi core levels within the Bi$_2$Se$_3$ layers indicating primarily Bi-Bi bonding over Bi-Se bonding. No out-diffusion of Se occurred when excess Se is supplied with Mn, indicating the importance of supplying enough chalcogen atoms with deposited metals. However, Bi$_2$Se$_3$ core level photoelectrons exhibited a rigid chemical shift toward higher binding energy after depositing a monolayer of MnSe$_{2-x}$, indicating a dipole within the overlayer. Stoichiometry calculations indicated that the monolayer forms MnSe preferentially over the transition metal dichalcogenide (TMD) phase MnSe$_2$, providing a consistent picture of the dipole formation in which a plane of Se anions sits above Mn cations. This study shows that chemical diffusion and dipole formation are important for Mn-Bi$_2$Se$_3$ and MnSe$_{2-x}$-Bi$_2$Se$_3$ and should be considered carefully for TMD/TI interfaces more generally., Comment: 12 pages, 6 figures + 1 supplemental figure

We report epitaxial growth of vanadium diselenide (VSe$_2$) thin films in the octahedrally-coordinated (1T) structure on GaAs(111)B substrates by molecular beam epitaxy. Film thickness from a single monolayer (ML) up to 30 ML is demonstrated. Structural and chemical studies using by x-ray diffraction, transmission electron microscopy, scanning tunneling microscopy and x-ray photoelectron spectroscopy indicate high quality thin films. Further studies show that monolayer VSe$_2$ films on GaAs are not air-stable and are susceptible to oxidation within a matter of hours, which indicates that a protective capping layer should be employed for device applications. This work demonstrates that VSe$_2$, a candidate van der Waals material for possible spintronic and electronic applications, can be integrated with III-V semiconductors via epitaxial growth for 2D/3D hybrid devices., Comment: 14 pages, 4 figures

The intrinsic magnetic topological insulators MnBi$_2$X$_4$ (X = Se, Te) are promising candidates in realizing various novel topological states related to symmetry breaking by magnetic order. Although much progress had been made in MnBi$_2$Te$_4$, the study of MnBi$_2$Se$_4$ has been lacking due to the difficulty of material synthesis of the desired trigonal phase. Here, we report the synthesis of multilayer trigonal MnBi$_2$Se$_4$ with alternating-layer molecular beam epitaxy. Atomic-resolution scanning transmission electron microscopy (STEM) and scanning tunneling microscopy (STM) identify a well-ordered multilayer van der Waals (vdW) crystal with septuple-layer base units in agreement with the trigonal structure. Systematic thickness-dependent magnetometry studies illustrate the layered antiferromagnetic ordering as predicted by theory. Angle-resolved photoemission spectroscopy (ARPES) reveals the gapless Dirac-like surface state of MnBi$_2$Se$_4$, which demonstrates that MnBi$_2$Se$_4$ is a topological insulator above the magnetic ordering temperature. These systematic studies show that MnBi$_2$Se$_4$ is a promising candidate for exploring the rich topological phases of layered antiferromagnetic topological insulators., Comment: 20 pages, 9 figures

We review recent progress on spins and magnetism in 2D materials including graphene, transition metal dichalcogenides, and 2D magnets. We also discuss challenges and prospects for the future of spintronics with 2D van der Waals heterostructures., Comment: 3 pages, 2 figures

It is important to study the van der Waals interface in emerging vertical heterostructures based on layered two-dimensional (2D) materials. Being atomically thin, 2D materials are susceptible to significant strains as well as charge transfer doping across the interfaces. Here we use Raman and photoluminescence (PL) spectroscopy to study the interface between monolayer graphene/MoS2 heterostructures prepared by mechanical exfoliation and layer-by-layer transfer. By using correlation analysis between the Raman modes of graphene and MoS2 we show that both layers are subjected to compressive strain and charge transfer doping following mechanical exfoliation and thermal annealing. Furthermore, we show that both strain and carrier concentration can be modulated in the heterostructures with additional thermal annealing. Our study highlights the importance of considering both mechanical and electronic coupling when characterizing the interface in van der Waals heterostructures, and demonstrates a method to tune their electromechanical properties., Comment: 5 Figures, 1 table

We have used scanning tunneling microscopy (STM) to investigate two types of hydrogen defect structures on monolayer graphene supported by hexagonal boron nitride (h-BN) in a gated field-effect transistor configuration. The first H-defect type is created by bombarding graphene with 1-keV ionized hydrogen and is identified as two hydrogen atoms bonded to a graphene vacancy via comparison of experimental data to first-principles calculations. The second type of H defect is identified as dimerized hydrogen and is created by depositing atomic hydrogen having only thermal energy onto a graphene surface. Scanning tunneling spectroscopy (STS) measurements reveal that hydrogen dimers formed in this way open a new elastic channel in the tunneling conductance between an STM tip and graphene., Comment: 5 figures

We report the experimental observation of sublattice-resolved resonant scattering in bilayer graphene by performing simultaneous cryogenic atomic hydrogen doping and electron transport measurements in ultrahigh vacuum. This allows us to monitor the hydrogen adsorption on the different sublattices of bilayer graphene without atomic-scale microscopy. Specifically, we detect two distinct resonant scattering peaks in the gate-dependent resistance, which evolve as a function of atomic hydrogen dosage. Theoretical calculations show that one of the peaks originates from resonant scattering by hydrogen adatoms on the {\alpha}-sublattice (dimer site) while the other originates from hydrogen adatoms on the \b{eta}-sublattice (non-dimer site), thereby enabling a method for characterizing the relative sublattice occupancy via transport measurements. Utilizing this new capability, we investigate the adsorption and thermal desorption of hydrogen adatoms via controlled annealing and conclude that hydrogen adsorption on the \b{eta}-sublattice is energetically favored. Through site-selective desorption from the {\alpha}-sublattice, we realize hydrogen doping with adatoms primarily on a single sublattice, which is highly desired for generating ferromagnetism.

Hexagonal boron nitride (hBN) is an essential component in van der Waals heterostructures as it provides high quality and weakly interacting interfaces that preserve the electronic properties of adjacent materials. While exfoliated flakes of hBN have been extensively studied using electron transport and optical probes, detailed experimental measurements of the energy- and momentum- dependent electronic excitation spectrum are lacking. Here, we directly determine the full valence band (VB) electronic structure of micron-sized exfoliated flakes of hBN using angle-resolved photoemission spectroscopy with micrometer spatial resolution. We identify the {\pi}- and {\sigma}-band dispersions, the hBN stacking order and determine a total VB bandwidth of 19.4 eV. We compare these results with electronic structure data for epitaxial hBN on graphene on silicon carbide grown in situ using a borazine precursor. The epitaxial growth and electronic properties are investigated using photoe- mission electron microscopy. Our measurements show that the fundamental electronic properties of hBN are highly dependent on the fabrication strategy., Comment: 10 pages, 8 figures

Due to the atomically thin nature of monolayer and few-layer van der Waals magnets, the undesired background signal from the substrate can have significant contribution when characterizing their magnetic properties. This brings challenges in accurately determining the magnitude of the magnetic moment of the epitaxially grown van der Waals magnets on bulk substrates. In this paper, we discuss the impact of the background subtraction method for accurately determining the magnetic moments in such systems. Using the recently reported intrinsic two-dimensional (2D) van der Waals ferromagnet MnSe${_2}$ as an example, we show that a normal diamagnetic background subtraction method in analyzing the bulk magnetometry measurement will result in an unexpectedly large magnetic moment (greater than ~10 {\mu}${_B}$ per formula unit). Through our systematic growth study, we identify an additional paramagnetic signal due to unintentional Mn doping of the substrate. To extract the correct magnetic moment, a paramagnetic background should also be considered. This yields a total magnetic moment of ~4 {\mu}${_B}$ per formula unit in monolayer MnSe${_2}$, which is in close agreement to the theoretically predicted value.

The bias dependence of spin injection in graphene lateral spin valves is systematically studied to determine the factors affecting the tunneling spin injection efficiency. Three types of junctions are investigated, including MgO and hexagonal boron nitride (hBN) tunnel barriers and direct contacts. A DC bias current applied to the injector electrode induces a strong nonlinear bias dependence of the nonlocal spin signal for both MgO and hBN tunnel barriers. Furthermore, this signal reverses its sign at a negative DC bias for both kinds of tunnel barriers. The analysis of the bias dependence for injector electrodes with a wide range of contact resistances suggests that the sign reversal correlates with bias voltage rather than current. We consider different mechanisms for nonlinear bias dependence and conclude that the energy-dependent spin-polarized electronic structure of the ferromagnetic electrodes, rather than the electrical field-induced spin drift effect or spin filtering effect of the tunnel barrier, is the most likely explanation of the experimental observations., Comment: 10 pages, 6 figures

We report the discovery of a strong and tunable spin lifetime anisotropy with excellent spin lifetimes up to 7.8 ns in dual-gated bilayer graphene. Remarkably, this realizes the manipulation of spins in graphene by electrically-controlled spin-orbit fields, which is unexpected due to graphene's weak intrinsic spin-orbit coupling. We utilize both the in-plane magnetic field Hanle precession and oblique Hanle precession measurements to directly compare the lifetimes of out-of-plane vs. in-plane spins. We find that near the charge neutrality point, the application of a perpendicular electric field opens a band gap and generates an out-of-plane spin-orbit field that stabilizes out-of-plane spins against spin relaxation, leading to a large spin lifetime anisotropy. This intriguing behavior occurs because of the unique spin-valley coupled band structure of bilayer graphene. Our results demonstrate the potential for highly tunable spintronic devices based on dual-gated 2D materials., Comment: 18 pages, 7 figures

Ultrathin films of Na3Bi on insulating substrates are desired for opening a bulk band gap and generating the quantum spin Hall effect from a topological Dirac semimetal, though continuous films in the few nanometer regime have been difficult to realize. Here, we utilize alternating layer molecular beam epitaxy (MBE) to achieve uniform and continuous single crystal films of Na3Bi(0001) on insulating Al2O3(0001) substrates and demonstrate electrical transport on films with 3.8 nm thickness (4 unit cells). The high material quality is confirmed through in situ reflection high-energy electron diffraction (RHEED), scanning tunneling microscopy (STM), x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS). In addition, these films are employed as seed layers for subsequent growth by codeposition, leading to atomic layer-by-layer growth as indicated by RHEED intensity oscillations. These material advances facilitate the pursuit of quantum phenomena in thin films of Dirac semimetals., Comment: 11 pages, 5 figures

An in situ measurement of spin transport in a graphene nonlocal spin valve is used to quantify the spin current absorbed by a small (250 nm $\times$ 750 nm) metallic island. The experiment allows for successive depositions of either Fe or Cu without breaking vacuum, so that the thickness of the island is the only parameter that is varied. Furthermore, by measuring the effect of the island using separate contacts for injection and detection, we isolate the effect of spin absorption from any change in the spin injection and detection mechanisms. As inferred from the thickness dependence, the effective spin current $j_e = \frac{2e}{\hbar} j_s$ absorbed by Fe is as large as $10^8$ A/m$^2$. The maximum value of $j_e$ is limited by the resistance-area product of the graphene/Fe interface, which is as small as 3 $\Omega\mu$m$^2$. The spin current absorbed by the same thickness of Cu is smaller than for Fe, as expected given the longer spin diffusion length and larger spin resistance of Cu compared to Fe. These results allow for a quantitative assessment of the prospects for achieving spin transfer torque switching of a nanomagnet using a graphene-based nonlocal spin valve., Comment: 20 pages, includes supplemental information

Monolayer van der Waals (vdW) magnets provide an exciting opportunity for exploring two-dimensional (2D) magnetism for scientific and technological advances, but the intrinsic ferromagnetism has only been observed at low temperatures. Here, we report the observation of room temperature ferromagnetism in manganese selenide (MnSe$_x$) films grown by molecular beam epitaxy (MBE). Magnetic and structural characterization provides strong evidence that in the monolayer limit, the ferromagnetism originates from a vdW manganese diselenide (MnSe$_2$) monolayer, while for thicker films it could originate from a combination of vdW MnSe$_2$ and/or interfacial magnetism of $\alpha$-MnSe(111). Magnetization measurements of monolayer MnSe$_x$ films on GaSe and SnSe$_2$ epilayers show ferromagnetic ordering with large saturation magnetization of ~ 4 Bohr magnetons per Mn, which is consistent with density functional theory calculations predicting ferromagnetism in monolayer 1T-MnSe$_2$. Growing MnSe$_x$ films on GaSe up to high thickness (~ 40 nm) produces $\alpha$-MnSe(111), and an enhanced magnetic moment (~ 2x) compared to the monolayer MnSe$_x$ samples. Detailed structural characterization by scanning transmission electron microscopy (STEM), scanning tunneling microscopy (STM), and reflection high energy electron diffraction (RHEED) reveal an abrupt and clean interface between GaSe(0001) and $\alpha$-MnSe(111). In particular, the structure measured by STEM is consistent with the presence of a MnSe$_2$ monolayer at the interface. These results hold promise for potential applications in energy efficient information storage and processing.

Graphene has remarkable opportunities for spintronics due to its high mobility and long spin diffusion length, especially when encapsulated in hexagonal boron nitride (h-BN). Here, for the first time, we demonstrate gate-tunable spin transport in such encapsulated graphene-based spin valves with one-dimensional (1D) ferromagnetic edge contacts. An electrostatic backgate tunes the Fermi level of graphene to probe different energy levels of the spin-polarized density of states (DOS) of the 1D ferromagnetic contact, which interact through a magnetic proximity effect (MPE) that induces ferromagnetism in graphene. In contrast to conventional spin valves, where switching between high- and low-resistance configuration requires magnetization reversal by an applied magnetic field or a high-density spin-polarized current, we provide an alternative path with the gate-controlled spin inversion in graphene. The resulting tunable MPE employing a simple ferromagnetic metal holds promise for spintronic devices and to realize exotic topological states, from quantum spin Hall and quantum anomalous Hall effects, to Majorana fermions and skyrmions.

The spin lifetime anisotropy is an important quantity for investigating the spin relaxation mechanisms in graphene and in heterostructures of two-dimensional materials. We generalize the diffusive spin transport equations of oblique spin precession in a lateral spin valve with finite contact resistance. This yields a method to determine the spin lifetime anisotropy ratio {\xi}={\tau}$_{\perp}$/{\tau}$_{\parallel}$, which is the ratio between lifetimes of spin polarized perpendicular and parallel to the graphene surface. By solving the steady-state Bloch equations, we show that the line-shape of the oblique spin precession signal can be described with six dimensionless parameters, which can be solved analytically. We demonstrate that the anisotropic spin precession characteristics can be strongly suppressed by contact induced spin relaxation originating from conductance mismatch between the channel material and electrodes. To extract the spin lifetime anisotropy ratio accurately, we develop a closed form equation that includes the effect of finite contact resistance. Furthermore, we demonstrate that in the high contact resistance regime, the minimum channel length required for accurately determining the spin lifetime anisotropy for a sufficiently low external magnetic field is only determined by the diffusion coefficient of the channel material, as opposed to the spin diffusion length. Our work provides an accurate model to extract the spin lifetime anisotropy ratio from the oblique spin precession measurement, and can be used to guide the device design for such measurements., Comment: 27 pages, 5 figures

The discovery of new families of exfoliatable 2D crystals that have diverse sets of electronic, optical, and spin-orbit coupling properties, enables the realization of unique physical phenomena in these few-atom thick building blocks and in proximity to other materials. Herein, using NaSn2As2 as a model system, we demonstrate that layered Zintl phases having the stoichiometry ATt2Pn2 (A = Group 1 or 2 element, Tt = Group 14 tetrel element and Pn = Group 15 pnictogen element) and feature networks separated by van der Waals gaps can be readily exfoliated with both mechanical and liquid-phase methods. We identified the symmetries of the Raman active modes of the bulk crystals via polarized Raman spectroscopy. The bulk and mechanically exfoliated NaSn2As2 samples are resistant towards oxidation, with only the top surface oxidizing in ambient conditions over a couple of days, while the liquid-exfoliated samples oxidize much more quickly in ambient conditions. Employing angle-resolved photoemission spectroscopy (ARPES), density functional theory (DFT), and transport on bulk and exfoliated samples, we show that NaSn2As2 is a highly conducting 2D semimetal, with resistivities on the order of 10-6 {\Omega} m. Due to peculiarities in the band structure, the dominating p-type carriers at low temperature are nearly compensated by the opening of n-type conduction channels as temperature increases. This work further expands the family of exfoliatable 2D materials to layered van der Waals Zintl phases, opening up opportunities in electronics and spintronics.

We observe the magnetic proximity effect (MPE) in Pt/CoFe2O4 bilayers grown by molecular beam epitaxy. This is revealed through angle-dependent magnetoresistance measurements at 5 K, which isolate the contributions of induced ferromagnetism (i.e. anisotropic magnetoresistance) and spin Hall effect (i.e. spin Hall magnetoresistance) in the Pt layer. The observation of induced ferromagnetism in Pt via AMR is further supported by density functional theory calculations and various control measurements including insertion of a Cu spacer layer to suppress the induced ferromagnetism. In addition, anomalous Hall effect measurements show an out-of-plane magnetic hysteresis loop of the induced ferromagnetic phase with larger coercivity and larger remanence than the bulk CoFe2O4. By demonstrating MPE in Pt/CoFe2O4, these results establish the spinel ferrite family as a promising material for MPE and spin manipulation via proximity exchange fields., Comment: 16 pages, 6 figures

We report experimental and theoretical evidence for the formation of chiral bobbers - an interfacial topological spin texture - in FeGe films grown by molecular beam epitaxy (MBE). After establishing the presence of skyrmions in FeGe/Si(111) thin film samples through Lorentz transmission electron microscopy and topological Hall effect, we perform magnetization measurements that reveal an inverse relationship between film thickness and the slope of the susceptibility (d\c{hi}/dH). We present evidence for the evolution as a function of film thickness, L, from a skyrmion phase for L < LD/2 to a cone phase with chiral bobbers at the interface for L > LD/2, where LD ~ 70 nm is the FeGe pitch length. We show using micromagnetic simulations that chiral bobbers, earlier predicted to be metastable, are in fact the stable ground state in the presence of an additional interfacial Rashba Dzyaloshinskii-Moriya interaction (DMI)., Comment: accepted to Phys. Rev. Materials

Two dimensional (2D) materials provide a unique platform for spintronics and valleytronics due to the ability to combine vastly different functionalities into one vertically-stacked heterostructure, where the strengths of each of the constituent materials can compensate for the weaknesses of the others. Graphene has been demonstrated to be an exceptional material for spin transport at room temperature, however it lacks a coupling of the spin and optical degrees of freedom. In contrast, spin/valley polarization can be efficiently generated in monolayer transition metal dichalcogenides (TMD) such as MoS2 via absorption of circularly-polarized photons, but lateral spin or valley transport has not been realized at room temperature. In this letter, we fabricate monolayer MoS2/few-layer graphene hybrid spin valves and demonstrate, for the first time, the opto-valleytronic spin injection across a TMD/graphene interface. We observe that the magnitude and direction of spin polarization is controlled by both helicity and photon energy. In addition, Hanle spin precession measurements confirm optical spin injection, spin transport, and electrical detection up to room temperature. Finally, analysis by a one-dimensional drift-diffusion model quantifies the optically injected spin current and the spin transport parameters. Our results demonstrate a 2D spintronic/valleytronic system that achieves optical spin injection and lateral spin transport at room temperature in a single device, which paves the way for multifunctional 2D spintronic devices for memory and logic applications., Comment: Nano Letters, in press

Electrons in two-dimensional graphene sheets behave as interacting chiral Dirac fermions and have unique screening properties due to their symmetry and reduced dimensionality. By using a combination of scanning tunneling spectroscopy (STM/STS) measurements and theoretical modeling we have characterized how graphene's massless charge carriers screen individual charged calcium atoms. A back-gated graphene device configuration has allowed us to directly visualize how the screening length for this system can be tuned with carrier density. Our results provide insight into electron-impurity and electron-electron interactions in a relativistic setting with important consequences for other graphene-based electronic devices., Comment: 4 figures

In two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), new electronic phenomena such as tunable band gaps and strongly bound excitons and trions emerge from strong many-body effects, beyond spin-orbit coupling- and lattice symmetry-induced spin and valley degrees of freedom. Combining single-layer (SL) TMDs with other 2D materials in van der Waals heterostructures offers an intriguing means of controlling the electronic properties through these many-body effects via engineered interlayer interactions. Here, we employ micro-focused angle-resolved photoemission spectroscopy (microARPES) and in-situ surface doping to manipulate the electronic structure of SL WS$_2$ on hexagonal boron nitride (WS$_2$/h-BN). Upon electron doping, we observe an unexpected giant renormalization of the SL WS$_2$ valence band (VB) spin-orbit splitting from 430~meV to 660~meV, together with a band gap reduction of at least 325~meV, attributed to the formation of trionic quasiparticles. These findings suggest that the electronic, spintronic and excitonic properties are widely tunable in 2D TMD/h-BN heterostructures, as these are intimately linked to the quasiparticle dynamics of the materials., Comment: 14 pages, 4 figures. Address correspondence to ulstrup@phys.au.dk or cmjozwiak@lbl.gov

Skyrmions are localized magnetic spin textures whose stability has been shown theoretically to depend on material parameters including bulk Dresselhaus spin orbit coupling (SOC), interfacial Rashba SOC, and magnetic anisotropy. Here, we establish the growth of a new class of artificial skyrmion materials, namely B20 superlattices, where these parameters could be systematically tuned. Specifically, we report the successful growth of B20 superlattices comprised of single crystal thin films of FeGe, MnGe, and CrGe on Si(111) substrates. Thin films and superlattices are grown by molecular beam epitaxy and are characterized through a combination of reflection high energy electron diffraction, x-ray diffraction, and cross-sectional scanning transmission electron microscopy (STEM). X-ray energy dispersive spectroscopy (XEDS) distinguishes layers by elemental mapping and indicates good interface quality with relatively low levels of intermixing in the [CrGe/MnGe/FeGe] superlattice. This demonstration of epitaxial, single-crystalline B20 superlattices is a significant advance toward tunable skyrmion systems for fundamental scientific studies and applications in magnetic storage and logic., Comment: 16 pages, 7 figures

There is a substantial interest in the heterostructures of semiconducting transition metal dichalcogenides (TMDCs) amongst each other or with arbitrary materials, through which the control of the chemical, structural, electronic, spintronic, and optical properties can lead to a change in device paradigms. A critical need is to understand the interface between TMDCs and insulating substrates, for example high-$\kappa$ dielectrics, which can strongly impact the electronic properties such as the optical gap. Here we show that the chemical and electronic properties of the single-layer (SL) TMDC, WS$_2$, can be transferred onto high-$\kappa$ transition metal oxide substrates TiO$_2$ and SrTiO$_3$. The resulting samples are much more suitable for measuring their electronic and chemical structures with angle-resolved photoemission than their native-grown SiO$_2$ substrates. We probe the WS$_2$ on the micron scale across 100-micron flakes, and find that the occupied electronic structure is exactly as predicted for freestanding SL WS$_2$ with a strong spin-orbit splitting of 420~meV and a direct band gap at the valence band maximum. Our results suggest that TMDCs can be combined with arbitrary multi-functional oxides, which may introduce alternative means of controlling the optoelectronic properties of such materials., Comment: 28 pages, 5 figures

Two dimensional (2D) materials provide a unique platform to explore the full potential of magnetic proximity driven phenomena, which can be further used for applications in next generation spintronic devices. Of particular interest is to understand and control spin currents in graphene by the magnetic exchange field of a nearby ferromagnetic material in graphene/ferromagnetic-insulator (FMI) heterostructures. Here, we present the experimental study showing the strong modulation of spin currents in graphene layers by controlling the direction of the exchange field due to FMI magnetization. Owing to clean interfaces, a strong magnetic exchange coupling leads to the experimental observation of complete spin modulation at low externally applied magnetic fields in short graphene channels. Additionally, we discover that the graphene spin current can be fully dephased by randomly fluctuating exchange fields. This is manifested as an unusually strong temperature dependence of the non-local spin signals in graphene, which is due to spin relaxation by thermally-induced transverse fluctuations of the FMI magnetization.

We report on preparation dependent properties observed in monolayer WS2 samples synthesized via chemical vapor deposition (CVD) on a variety of common substrates (Si/SiO2, sapphire, fused silica) as well as samples that were transferred from the growth substrate onto a new substrate. The as-grown CVD materials (as-WS2) exhibit distinctly different optical properties than transferred WS2 (x-WS2). In the case of CVD growth on Si/SiO2, following transfer to fresh Si/SiO2 there is a ~50 meV shift of the ground state exciton to higher emission energy in both photoluminescence emission and optical reflection. This shift is indicative of a reduction in tensile strain by ~0.25%. Additionally, the excitonic state in x-WS2 is easily modulated between neutral and charged exciton by exposure to moderate laser power, while such optical control is absent in as-WS2 for all growth substrates investigated. Finally, we observe dramatically different laser power-dependent behavior for as-grown and transferred WS2. These results demonstrate a strong sensitivity to sample preparation that is important for both a fundamental understanding of these novel materials as well as reliable reproduction of device properties., Comment: final manuscript available at Scientific Reports