Search

Electro-optic (EO) modulators rely on interaction of optical and electrical signals with second-order nonlinear media. For the optical signal, this interaction can be strongly enhanced by using dielectric slot-waveguide structures that exploit a field discontinuity at the interface between a high-index waveguide core and the low-index EO cladding. In contrast to this, the electrical signal is usually applied through conductive regions in the direct vicinity of the optical waveguide. To avoid excessive optical loss, the conductivity of these regions is maintained at a moderate level, thus leading to inherent RC-limitations of the modulation bandwidth. In this paper, we show that these limitations can be overcome by extending the slot-waveguide concept to the modulating radio-frequency (RF) signal. Our device combines an RF slotline that relies on BaTiO3 as a high-k dielectric material with a conventional silicon photonic slot waveguide and a highly efficient organic EO cladding material. In a proof-of-concept experiment, we demonstrate a 1 mm-long Mach-Zehnder modulator that offers a 3 dB-bandwidth of 76 GHz and a 6 dB-bandwidth of 110 GHz along with a small {\pi}-voltage of 1.3 V (U{\pi}L = 1.3 V mm). To the best of our knowledge, this represents the largest EO bandwidth so far achieved with a silicon photonic modulator based on dielectric waveguides. We further demonstrate the viability of the device in a data transmission experiment using four-state pulse-amplitude modulation (PAM4) at line rates up to 200 Gbit/s. Our first-generation devices leave vast room for further improvement and may open an attractive route towards highly efficient silicon photonic modulators that combine sub-1 mm device lengths with sub-1 V drive voltages and modulation bandwidths of more than 100 GHz., Comment: 8 pages main paper, 7 pages supplementary info, 11 figures

We report on compact and efficient silicon-organic hybrid (SOH) Mach-Zehnder modulators (MZM) with low phase shifter insertion loss of 0.7 dB. The 280 $\mu$m-long phase shifters feature a $\pi$-voltage-length product of 0.41 Vmm and a loss-efficiency product as small as $aU_{\pi}L = 1.0\space\rm{VdB}$. The device performance is demonstrated in a data transmission experiment, where we generate on-off-keying (OOK) and four-level pulse-amplitude modulation (PAM4) signals at symbol rates of 100 GBd, resulting in line rates of up to 200 Gbit/s. Bit error ratios are below the threshold for hard-decision forward error correction (HD-FEC) with 7 % coding overhead, leading to net data rates of 187 Gbit/s. This is the highest PAM4 data rate ever achieved for a sub-1 mm silicon photonic MZM.

Quantum-dash (QD) mode-locked laser diodes (MLLD) lend themselves as chip-scale frequency comb generators for highly scalable wavelength-division multiplexing (WDM) links in future data-center, campus-area, or metropolitan networks. Driven by a simple DC current, the devices generate flat broadband frequency combs, containing tens of equidistant optical tones with line spacings of tens of GHz. Here we show that QD-MLLDs can not only be used as multi-wavelength light sources at a WDM transmitter, but also as multi-wavelength local oscillators (LO) for parallel coherent reception. In our experiments, we demonstrate transmission of an aggregate data rate of 4.1 Tbit/s (23x45 GBd PDM-QPSK) over 75 km standard single-mode fiber (SSMF). To the best of our knowledge, this represents the first demonstration of a coherent WDM link that relies on QD-MLLD both at the transmitter and the receiver.

High-speed communication systems rely on spectrally efficient modulation formats that encode information both on the amplitude and on the phase of an electromagnetic carrier. Coherent detection of such signals typically uses rather complex receiver schemes, requiring a continuous-wave (c.w.) local oscillator (LO) as a phase reference and a mixer circuit for spectral down-conversion. In optical communications, the so-called Kramers-Kronig (KK) scheme has been demonstrated to greatly simplify the receiver, reducing the hardware to a single photodiode. In this approach, an LO tone is transmitted along with the signal, and the amplitude and phase of the complex signal envelope are reconstructed from the photocurrent by digital signal processing. This reconstruction exploits the fact that the real and the imaginary part, or, equivalently, the amplitude and the phase of an analytic signal are connected by a KK-type relation. Here, we transfer the KK scheme to high-speed wireless communications at THz carrier frequencies. We use a Schottky-barrier diode (SBD) as a nonlinear element and generalize the theory of KK processing to account for the non-quadratic characteristics of this device. Using 16-state quadrature amplitude modulation (16QAM), we transmit a net data rate of 115 Gbit/s at a carrier frequency of 0.3 THz over a distance of 110 m., Comment: 9 pages Main Paper + 7 pages Supplementary Information

Optical frequency combs have the potential to become key building blocks of optical communication subsystems. The strictly equidistant, narrow-band spectral lines of a frequency comb can serve both as carriers for massively parallel data transmission and as local oscillator for coherent reception. Recent experiments have demonstrated the viability of various chip-based comb generator concepts for communication applications, offering transmission capacities of tens of Tbit/s. Here, we investigate the influence of the comb line power and of the carrier-to-noise power ratio on the performance of a frequency comb in a WDM system. We distinguish two regimes of operation depending on whether the comb source or the transmission link limits the performance of the system, i.e., defines the link reach, restricts the choice of modulation format and sets the maximum symbol rate. Finally, we investigate the achievable OSNR and channel capacity when using the tones of a soliton Kerr frequency comb as multi-wavelength carriers for WDM systems., Comment: 8 pages, 5 figures

Chip-scale frequency comb generators have the potential to become key building blocks of compact wavelength-division multiplexing (WDM) transceivers in future metropolitan or campus-area networks. Among the various comb generator concepts, quantum-dash (QD) mode-locked laser diodes (MLLD) stand out as a particularly promising option, combining small footprint with simple operation by a DC current and offering flat broadband comb spectra. However, the data transmission performance achieved with QD-MLLD was so far limited by strong phase noise of the individual comb tones, restricting experiments to rather simple modulation formats such as quadrature phase shift keying (QPSK) or requiring hard-ware-based compensation schemes. Here we demonstrate that these limitations can be over-come by digital symbol-wise phase tracking algorithms, avoiding any hardware-based phase-noise compensation. We demonstrate 16QAM dual-polarization WDM transmission on 38 channels at an aggregate net data rate of 10.68 Tbit/s over 75 km of standard single-mode fiber. To the best of our knowledge, this corresponds to the highest data rate achieved through a DC-driven chip-scale comb generator without any hardware-based phase-noise reduction schemes.

Photonics might play a key role in future wireless communication systems that operate at THz carrier frequencies. A prime example is the generation of THz data streams by mixing optical signals in high-speed photodetectors. Over the previous years, this concept has enabled a series of wireless transmission experiments at record-high data rates. Reception of THz signals in these experiments, however, still relied on electronic circuits. In this paper, we show that wireless THz receivers can also greatly benefit from optoelectronic signal processing techniques, in particular when carrier frequencies beyond 0.1 THz and wideband tunability over more than an octave is required. Our approach relies on a high-speed photoconductor and a photonic local oscillator for optoelectronic down-conversion of THz data signals to an intermediate frequency band that is easily accessible by conventional microelectronics. By tuning the frequency of the photonic local oscillator, we can cover a wide range of carrier frequencies between 0.03 THz and 0.34 THz. We demonstrate line rates of up to 10 Gbit/s on a single channel and up to 30 Gbit/s on multiple channels over a distance of 58 m. To the best of our knowledge, our experiments represent the first demonstration of a THz transmission link that exploits optoelectronic signal processing techniques both at the transmitter and the receiver., Comment: 7 pages Main Paper + 6 pages Supplementary Information

Silicon-organic hybrid (SOH) electro-optic (EO) modulators combine small footprint with low operating voltage and hence low power dissipation, thus lending themselves to on-chip integration of large-scale device arrays. Here we demonstrate an electrical packaging concept that enables high-density radio-frequency (RF) interfaces between on-chip SOH devices and external circuits. The concept combines high-resolution $\mathrm{Al_2O_3}$ printed-circuit boards with technically simple metal wire bonds and is amenable to packaging of device arrays with small on-chip bond pad pitches. In a set of experiments, we characterize the performance of the underlying RF building blocks and we demonstrate the viability of the overall concept by generation of high-speed optical communication signals. Achieving line rates (symbols rates) of 128 Gbit/s (64 GBd) using quadrature-phase-shiftkeying (QPSK) modulation and of 160 Gbit/s (40 GBd) using 16-state quadrature-amplitudemodulation (16QAM), we believe that our demonstration represents an important step in bringing SOH modulators from proof-of-concept experiments to deployment in commercial environments.

We report on the first demonstration of long-term thermally stable silicon-organic hybrid (SOH) modulators in accordance with Telcordia standards of high-temperature storage. The devices rely on an organic electro-optic sidechain polymer with a high glass transition temperature of 172 {\deg}C. In our high-temperature storage experiments at 85 {\deg}C, we find that the electro-optic activity converges to a constant long-term stable level after an initial decay. If we consider a burn-in time of 300 h, the {\pi}-voltage of the modulators increases on average by less than 15 % if we store the devices for additional 2400 h. The performance of the devices is demonstrated by generating high-quality 40 Gbit/s OOK signals both after the burn-in period and after extended high-temperature storage.

Efficient electro-optic (EO) modulators crucially rely on advanced materials that exhibit strong electro-optic activity and that can be integrated into high-speed and efficient phase shifter structures. In this paper, we demonstrate ultra-high in-device EO figures of merit of up to n3r33 = 2300 pm/V achieved in a silicon-organic hybrid (SOH) Mach-Zehnder Modulator (MZM) using the EO chromophore JRD1. This is the highest material-related in-device EO figure of merit hitherto achieved in a high-speed modulator at any operating wavelength. The {\pi}-voltage of the 1.5 mm-long device amounts to 210 mV, leading to a voltage-length product of U{\pi}L = 320 V{\mu}m - the lowest value reported for MZM that are based on low-loss dielectric waveguides. The viability of the devices is demonstrated by generating high-quality on-off-keying (OOK) signals at 40 Gbit/s with Q factors in excess of 8 at a drive voltage as low as 140 mVpp. We expect that efficient high-speed EO modulators will not only have major impact in the field of optical communications, but will also open new avenues towards ultra-fast photonic-electronic signal processing., Comment: 9 pages, 4 figures

Optical solitons are waveforms that preserve their shape while propagating, relying on a balance of dispersion and nonlinearity. Soliton-based data transmission schemes were investigated in the 1980s, promising to overcome the limitations imposed by dispersion of optical fibers. These approaches, however, were eventually abandoned in favor of wavelength-division multiplexing (WDM) schemes that are easier to implement and offer improved scalability to higher data rates. Here, we show that solitons may experience a comeback in optical communications, this time not as a competitor, but as a key element of massively parallel WDM. Instead of encoding data on the soliton itself, we exploit continuously circulating dissipative Kerr solitons (DKS) in a microresonator. DKS are generated in an integrated silicon nitride microresonator by four-photon interactions mediated by Kerr nonlinearity, leading to low-noise, spectrally smooth and broadband optical frequency combs. In our experiments, we use two interleaved soliton Kerr combs to transmit a data stream of more than 50Tbit/s on a total of 179 individual optical carriers that span the entire telecommunication C and L bands. Equally important, we demonstrate coherent detection of a WDM data stream by using a pair of microresonator Kerr soliton combs - one as a multi-wavelength light source at the transmitter, and another one as a corresponding local oscillator (LO) at the receiver. This approach exploits the scalability advantages of microresonator soliton comb sources for massively parallel optical communications both at the transmitter and receiver side. Taken together, the results prove the significant potential of these sources to replace arrays of continuous-wave lasers in high-speed communications., Comment: 10 pages, 3 figures