Search

Purpose To evaluate the influence of radioresistance and intrafractional movement on the tumour control probability (TCP) in IMRT prostate treatments using simultaneous integrated boosts to PSMA-PET/CT-delineated GTVs. Materials and methods 13 patients had PSMA-PET/CT prior to prostatectomy and histopathological examination. Two GTVs were available: GTV-PET and GTV-histo, which is the true cancer volume. Focused IMRT plans delivering 77 Gy in 35 fractions to the prostate and 95 Gy to PTV-PET were produced. For random portions of the true cancer volume, α and α/β were uniformly changed to represent different radiosensitivity reductions. TCP was calculated (linear quadratic model) for the true cancer volume with and without simulated intrafractional movement. Results Intrafractional movement increased the TCP by up to 10.2% in individual cases and 1.2% averaged over all cases for medium radiosensitivity levels. At lower levels of radiosensitivity, movement decreased the TCP. Radiosensitivity reductions of 10–20% led to TCP reductions of 1–24% and 10–68% for 1% and 5% affected cancer volume, respectively. There is no linear correlation but a sudden breakdown of TCPs within a small range of radiosensitivity levels. Conclusion TCP drops significantly within a narrow range of radiosensitivity levels. Intrafractional movement can increase TCP when the boost volume is surrounded by a sufficiently high dose plateau.

Summary Bone mineral density plays an important role in the determination of bone strength and fracture risks. Consequently, it is very important to obtain accurate bone mineral density measurements. The microcomputerized tomography system provides 3D information about the architectural properties of bone. Quantitative analysis accuracy is decreased by the presence of artefacts in the reconstructed images, mainly due to beam hardening artefacts (such as cupping artefacts). In this paper, we introduced a new beam hardening correction method based on a postreconstruction technique performed with the use of off-line water and bone linearization curves experimentally calculated aiming to take into account the nonhomogeneity in the scanned animal. In order to evaluate the mass correction rate, calibration line has been carried out to convert the reconstructed linear attenuation coefficient into bone masses. The presented correction method was then applied on a multimaterial cylindrical phantom and on mouse skeleton images. Mass correction rate up to 18% between uncorrected and corrected images were obtained as well as a remarkable improvement of a calculated mouse femur mass has been noticed. Results were also compared to those obtained when using the simple water linearization technique which does not take into account the nonhomogeneity in the object. Lay description The determination of bone mass in mice longitudinal experiments allow to study pathologies like osteoporosis or bone mass loss in cystic fibrosis patients. Computerized tomography is a very good method to perform this kind of bone mass measurements compared to ultrasound, …. computerized tomography consists in a X-ray tube and a detector. Due to the polychromatic nature of the X-rays produced by the tube, there are artefacts in the recorded images (compared to monochromatic source like X-rays from synchrotron). In this paper we propose a method to decrease these artefacts. It allows to obtain more accurate bone mass measurements. We validated our method on real mouse bones (femora and skull). The error was decrease from 5% to almost 0% in the case of femora (from 7% to 3% in the case of the skull).

Bone mineral density plays an important role in the determination of bone strength and fracture risks. Consequently, it is very important to obtain accurate bone mineral density measurements. The microcomputerized tomography system provides 3D information about the architectural properties of bone. Quantitative analysis accuracy is decreased by the presence of artefacts in the reconstructed images, mainly due to beam hardening artefacts (such as cupping artefacts). In this paper, we introduced a new beam hardening correction method based on a postreconstruction technique performed with the use of off-line water and bone linearization curves experimentally calculated aiming to take into account the nonhomogeneity in the scanned animal. In order to evaluate the mass correction rate, calibration line has been carried out to convert the reconstructed linear attenuation coefficient into bone masses. The presented correction method was then applied on a multimaterial cylindrical phantom and on mouse skeleton images. Mass correction rate up to 18% between uncorrected and corrected images were obtained as well as a remarkable improvement of a calculated mouse femur mass has been noticed. Results were also compared to those obtained when using the simple water linearization technique which does not take into account the nonhomogeneity in the object.