Search

To solve the problem of water pollution, using environment friendly and cost effective method in short time is the need of hour. In this work, chromium (Cr) and nitrogen (N) co-doped TiO2 nanoparticles were synthesized and were used for the photocatalytic degradation of dyes under visible light. The synergistic effect of metal and non-metal co-dopants added would result in appropriate reduction of band gap {from 3.2 eV of TiO2 to 2.67 eV}, decrease in recombination rate of charge carriers by trapping electrons and holes, and in better light harvesting capacity. Nanoparticles were synthesized by sol–gel method and characterized using ultraviolet–visible (UV–VIS) spectroscopy, fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM), zeta potential, X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) analysis, field emission scanning electron microscopy (FE-SEM), and RAMAN spectroscopy. Eosin yellow (EY) and rose bengal (RB) were subjected to photocatalytic degradation under solar light to check the photocatalytic activity of the synthesized nanoparticles. Effects of dye concentration, the concentration of nanoparticles, time, and pH were investigated to optimize the parameters. The results obtained were remarkable for 20 ppm EY solution took 10 min using 1 gL−1 NPs at pH 3 and 10 ppm RB solution took 5 min using 0.75 gL−1 NPs at pH 5.78 (original pH) for complete degradation. Kinetics studies were also performed and both dyes followed pseudo-second-order kinetics with R2 values 0.99312 and 0.99712 for EY and RB, respectively. The study of degraded products was conducted using high-performance liquid chromatography (HPLC) hyphenated with electron spray ionization mass spectroscopy (ESI–MS) (LC–MS) and possible degradation pathways were made for both dyes. A reusability test was also performed showing the efficiency of the particles was up to 88% after 3 cycles of use. These notable results can be attributed to the efficient removal of organic pollutants using the proposed dopants in this study. [ABSTRACT FROM AUTHOR]

The purpose to conduct this research work is to study the effect of photocatalytic degradation by developing cost-effective and eco-friendly nitrogen and tungsten (metal/non-metal) co-doped titania (TiO2). The inherent characteristics of synthesized nanoparticles (NPs) were analyzed by Fourier transform infra-red spectroscopy (FT-IR), ultra-violet visible (UV-Vis) spectroscopy, Raman spectroscopy, Field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), X-ray diffraction (XRD) spectrometry, and atomic force microscopy (AFM). Co-doping of metal and non-metal has intensified the photocatalysis trait of TiO2 nanoparticles in an aqueous medium. This co-doping of transition metal ions and modification of nitrogen extended the absorption into the visible region subsequently restraining the recombination of electrons/holes pair. The stronger light absorption in the visible region was required for the higher activity of photodegradation of dye under visible light illumination to confine bandgap energy which results in accelerating the rate of photodegradation. After efficient doping, the bandgap of titania reduced to 2.38 eV and caused the photodegradation of malachite green in visible light. The results of photocatalytic degradation were confirmed by using UV/Vis. spectroscopy and high-performance liquid chromatography coupled with a mass spectrophotometer (HPLC-ESI-MS) was used for the analysis of intermediates formed during photocatalytic utility of the work. [ABSTRACT FROM AUTHOR]

Niobium and nitrogen co-doped titanium dioxide (Nb-N-TiO 2) semiconductor nanostructures were synthesized through a facile sol-gel protocol using titanium tetra iso-propoxide (TTIP), urea and niobium pentoxide as precursors followed by calcination at 450 °C for 4 h. The synthesized nanomaterial (Nb-N-TiO 2) was characterized via Fourier Transform Infrared (FTIR) and Raman spectroscopy, UV-Visible (UV-Vis) Spectroscopy, Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Brunauer-Emmett-Teller (BET) technique, Dynamic Light Scattering (DLS) technique and ZETA Potential analysis. The band gap of Nb-N-TiO 2 was reduced as compared to TiO 2 due to reduced space between valance and conduction band which also reduced the electron-hole (e-, h+) recombination and led to better photocatalytic activity of the Nb-N-TiO 2 as confirmed by TAUC plot. Photocatalytic activity of Nb-N-TiO 2 was investigated for degradation of methylene blue (MB) dye under sunlight as cheaper light source. Factors like dye concentration, dosage of catalyst, volume of solution time and pH were studied and optimized for MB degradation. Under finally optimized conditions, 97% of 25 ppm MB was degraded just in one minute using 45 mg of photocatalyst. The co-doped nanocatalyst, was re-used for MB degradation upto 4th cycle with its efficiency reduced to 75% which shows a better catalytic role by the catalyst. Degradation products of MB were recognized through electrospray ionization coupled mass spectroscopy (ESI-MS) and liquid chromatography coupled mass spectroscopy (LC-MS) techniques. The catalyst was also applied for MB degradation in tap water sample. [Display omitted] • The Nb-N-TiO2 photocatalytic nanomaterial was synthesized by simple facile sol-gel method. • The synthesized Nb-N-TiO2 photocatalyst was analyzed via advanced techniques. • The degradation of methylene blue dye was checked using sunlight as a renewable source of energy. • For the degradation of MB dye different parameters were optimized and reusability test was also performed. • The degradation pathway of MB dye was proposed by analyzing degraded products. [ABSTRACT FROM AUTHOR]