Search

N-Heterocyclic carbenes (NHCs) are an emerging alternative to thiols for the formation of stable self-assembled monolayers (SAMs) on gold. We examined several different species that have been used to produce NHC-based monolayers on gold, namely 1,3-diisopropyl-5-nitrobenzimidazolium iodide, 1,3-diisopropyl-5-nitrobenzimidazolium hydrogen carbonate, bis(1,3-diisopropyl-5-nitrobenzimidazolium)gold(I) iodide, and 1,3-diisopropyl-5-nitrobenzimidazole-2-ylidene. Contrary to expectation, solutions containing the first two species in tetrahydrofuran and dichloromethane caused visible loss of gold from thin-film-coated glass slides. The use of toluene solutions of all species resulted in no apparent dissolution of gold. We present scanning electron micrographs and elemental imaging analyses by energy dispersive X-ray spectroscopy to examine the effect of solutions of each species on the gold film. This work highlights the risk of unwanted etching during some routes to NHC-based surface functionalization but also the potential for deliberate etching, with the outcome determined by choice of chemically synthesized organic species and solvent., (Copyright © 2023, Chevalier et al.)

Here, we report on the successful demonstration and application of carbonate (CO 3 2- ) ion-selective amperometric/voltammetric nanoprobes based on facilitated ion transfer (IT) at the nanoscale interface between two immiscible electrolyte solutions. This electrochemical study reveals critical factors to govern CO 3 2- -selective nanoprobes using broadly available Simon-type ionophores forming a covalent bond with CO 3 2- , i.e., slow dissolution of lipophilic ionophores in the organic phase, activation of hydrated ionophores, peculiar solubility of a hydrated ion-ionophore complex near the interface, and cleanness at the nanoscale interface. These factors are experimentally confirmed by nanopipet voltammetry, where a facilitated CO 3 2- IT is studied with a nanopipet filled with an organic phase containing the trifluoroacetophenone derivative CO 3 2- ionophore (CO 3 2- ionophore VII) by voltammetrically and amperometrically sensing CO 3 2- in water. Theoretical assessments of reproducible voltammetric data confirm that the dynamics of CO 3 2- ionophore VII-facilitated ITs (FITs) follows the one-step electrochemical (E) mechanism controlled by both water-finger formation/dissociation and ion-ionophore complexation/dissociation during interfacial ITs. The yielded rate constant, k 0 = 0.048 cm/s, is very similar to the reported values of other FIT reactions using ionophores forming non-covalent bonds with ions, implying that a weak binding between CO 3 2- ion-ionophore enables us to observe FITs by fast nanopipet voltammetry regardless of the nature of bondings between the ion and ionophore. The analytical utility of CO 3 2- -selective amperometric nanoprobes is further demonstrated by measuring the CO 3 2- concentration produced by metal-reducing bacteria Shewanella oneidensis MR-1 as a result of organic fuel oxidation in bacterial growth media in the presence of various interferents such as H 2 PO 4 - , Cl - , and SO 4 2- .

Resistance to traditional synthetic compounds by Varroa destructor Anderson and Trueman and shortcomings of the organic acid class of acaracides commonly used in varroa management requires continual development of new controls. V. destructor, however, are difficult to obtain for use in control bioassays because they are obligate parasites that cannot be easily reared outside of a honey bee colony. We conducted bioassays using other, more easily obtainable species to find organisms that could be used as surrogates for V. destructor when testing new potential controls. We compared the toxicities of acetic acid, lactic acid, formic acid, and oxalic acid at 0.005%, 0.05%, 0.5%, 5%, and 50% (20% oxalic acid only) concentrations based on natural volatility (nonheated) for the control of two beetle species, Oryzaephilus surinamensis L. and Alphitobius diaperinus Panzer, greater wax moth larvae, Galleria mellonella L., and V. destructor. The assay results were consistent across all species with formic acid and acetic acid showing 100% mortality of all four test species at 50% concentration. The assays also provided insight into the method of application (vaporization or contact) needed to cause mortality. Our results show that other organisms can be used in place of V. destructor for initial testing of acids and possibly other chemicals for control of the ectoparasite., (© The Author(s) 2022. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Among the various catalysts for ROP, H-bonding organocatalysts stand out in the precise level of reaction control they are able to render during ROP. The H-bonding class of organocatalysts are thought to effect ROP via dual activation of both monomer and chain end. (Thio)urea mediated ROP has experienced a renaissance as a new polymerization mechanism - mediated by imidate or thioimidate species - facilitates new modes of reactivity and new synthetic abilities. Indeed, the urea class of H-bond donors has been shown to be more active than their corresponding thioureas. The imidate mechanism remains highly active in polar solvents and exhibits remarkable control - and 'living' behavior - under solvent-free conditions, and a broad range of temperatures is accessible. The advancements in synthetic abilities have all evolved through a greater understanding of reaction mechanism. Through the continued synergistic advances of catalysis and material, the (thio)urea class of catalyst can find use in a host of potential applications, research and industrial environments.

The antibacterial compound, triclocarban (TCC), is shown to be a highly effective H-bond donating catalyst for ring-opening polymerization (ROP) when applied with an H-bond accepting base cocatalyst. These ROPs exhibit the characteristics of "living" polymerizations. TCC is shown to possess the high activity characteristic of urea (vs thiourea) H-bond donors. The urea class of H-bond donors is shown to remain highly active in H-bonding solvents, a trait that is not displayed by the corresponding thiourea H-bond donors. Two H-bond donating ureas that are electronically similar to TCC are evaluated for their efficacy in ROP, and a mechanism of action is proposed. This "off-the-shelf" H-bond donor is among the most active and most controlled organocatalysts for the ROP of lactones.

A new class of H-bond donating ureas was developed for the ring-opening polymerization (ROP) of lactone monomers, and they exhibit dramatic rate acceleration versus previous H-bond mediated polymerization catalysts. The most active of these new catalysts, a tris-urea H-bond donor, is among the most active organocatalysts known for ROP, yet it retains the high selectivity of H-bond mediated organocatalysts. The urea cocatalyst, along with an H-bond accepting base, exhibits the characteristics of a "living" ROP, is highly active, in one case, accelerating a reaction from days to minutes, and remains active at low catalyst loadings. The rate acceleration exhibited by this H-bond donor occurs for all base cocatalysts examined. A mechanism of action is proposed, and the new catalysts are shown to accelerate small molecule transesterifications versus currently known monothiourea catalysts. It is no longer necessary to choose between a highly active or highly selective organocatalyst for ROP.

For the first time, the controlled ring-opening polymerization (ROP) of ε-thionocaprolactone (tnCL) is conducted. The organocatalytic ROP of tnCL occurs without carbonyl scrambling, leading to homopoly(ε-thionocaprolactone) (PtnCL). The ROP by base catalysts alone is proposed to proceed via a nucleophilic mechanism, while the addition of an H-bond donating thiourea (TU) is shown to provide excellent reaction control. The increased reaction control provided by the TU occurs in the virtual absence of binding between tnCL and TU, and a mechanistic account for this observation is discussed. The monomer ring strain is measured and found to be similar to δ-valerolactone (VL). Copolymers with VL are synthesized, and the resulting analysis of the copolymer materials properties provides the only known physical characterizations of poly(thio(no)ester- co -ester)s.

A cocatalyst system consisting of an alkylamine base and a bis(thiourea) featuring a linear alkane tether is shown to dramatically increase the rate of ring-opening polymerization (ROP) of L-lactide versus previously disclosed monothiourea H-bond donors. Rate acceleration occurs regardless of the identity of the alkylamine cocatalyst, and the ROP remains controlled yielding poly(lactide) with narrow molecular weight distributions, predictable molecular weights and high selectivity for monomer. This H-bond mediated ROP of L-lactide constitutes a rare, clear example of rate acceleration with bis(thiourea) H-bond donors versus monothioureas, and the bis(thiourea) is shown to remain highly active for ROP at fractional percent catalyst loadings. Activation at a single monomer ester by both thiourea moieties is implicated as the source of rate acceleration.

Organocatalysts typically used for the ring-opening polymerization (ROP) of cyclic ester monomers are applied to a thiolactone, ε -thiocaprolactone (tCL). In the absence of an H-bond donor, a nucleophilic polymerization mechanism is proposed. Despite the decreased ability of thioesters and thiols (versus esters and alcohols) to H-bond, H-bonding organocatalysts-a thiourea in combination with an H-bond accepting base-are also effective for the ROP of tCL. The increased nucleophilicity of thiols (versus alcohols) is implicated in the increased M w / M n of the poly(thiocaprolactone) versus poly(caprolactone), but deleterious transesterification is suppressed in the presence of a thiourea. The thioester monomer, tCL, is shown to be thermodynamically similar to ε -caprolactam but kinetically similar to ε -caprolactone.

Thiourea (TU)/amine base cocatalysts are commonly employed for well-controlled, highly active "living" organocatalytic ring-opening polymerizations (ROPs) of cyclic esters and carbonates. In this work, several of the most active cocatalyst pairs are shown by 1 H NMR binding studies to be highly associated in solution, dominating all other known noncovalent catalyst/reagent interactions during ROP. One strongly binding catalyst pair behaves kinetically as a unimolecular catalyst species. The high selectivity and activity exhibited by these ROP organocatalysts are attributed to the strong binding between the two cocatalysts, and the predictive utility of these binding parameters is applied for the discovery of a new, highly active cocatalyst pair.

We illustrate the ability to place a water-insoluble biradical, bTbk, into a glycerol/water matrix with the assistance of a surfactant, sodium octyl sulfate (SOS). This surfactant approach enables a previously water insoluble biradical, bTbk, with favorable electron-electron dipolar coupling to be used for dynamic nuclear polarization (DNP) nuclear magnetic resonance (NMR) experiments in frozen, glassy, aqueous media. Nuclear Overhauser enhancement (NOE) and paramagnetic relaxation enhancement (PRE) experiments are conducted to determine the distribution of urea and several biradicals within the SOS macromolecular assembly. We also demonstrate that SOS assemblies are an effective approach by which mixed biradicals are created through an assembly process.

We report our recent efforts directed at improving high-field DNP experiments. We investigated a series of thiourea nitroxide radicals and the associated DNP enhancements ranging from ε = 25 to 82 that demonstrate the impact of molecular structure on performance. We directly polarized low-gamma nuclei including 13 C, 2 H, and 17 O using trityl via the cross effect. We discuss a variety of sample preparation techniques for DNP with emphasis on the benefit of methods that do not use a glass-forming cryoprotecting matrix. Lastly, we describe a corrugated waveguide for use in a 700 MHz / 460 GHz DNP system that improves microwave delivery and increases enhancements up to 50%.

The polyanionic nature of oligonucleotides and their enzymatic degradation present challenges for the use of siRNA in research and therapy; among the most notable of these is clinically relevant delivery into cells. To address this problem, we designed and synthesized the first members of a new class of guanidinium-rich amphipathic oligocarbonates that noncovalently complex, deliver, and release siRNA in cells, resulting in robust knockdown of target protein synthesis in vitro as determined using a dual-reporter system. The organocatalytic oligomerization used to synthesize these co-oligomers is step-economical and broadly tunable, affording an exceptionally quick strategy to explore chemical space for optimal siRNA delivery in varied applications. The speed and versatility of this approach and the biodegradability of the designed agents make this an attractive strategy for biological tool development, imaging, diagnostics, and therapeutic applications.

The ring-opening polymerization of substituted cyclic carbonates with 1-(3,5-bis-trifluoromethyl-phenyl)-3-cyclohexyl-thiourea (TU)/1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) organocatalysts afford highly functionalized oligocarbonates. The fluorescent alkaloid quinine can be readily incorporated into the oligocarbonates either by initiation from quinine or by ring-opening polymerization of a quinine-functionalized cyclic carbonate (MTC-Q). Copolymerization of MTC-Q with a boc-protected guanidinium cyclic carbonate affords, after deprotection, highly water-soluble cationic copolymers functionalized with both quinine and pendant guanidinium groups. When multiple quinine groups are attached to the oligomers, they exhibit minimal fluorescence due to self-quenching. Upon hydrolysis, the fluorescence intensity increases, providing a potential strategy for monitoring the hydrolysis rates in real time.

A new biradical polarizing agent, bTbtk-py, for dynamic nuclear polarization (DNP) experiments in aqueous media is reported. The synthesis is discussed in light of the requirements of the optimum, theoretical, biradical system. To date, the DNP NMR signal enhancement resulting from bTbtk-py is the largest of any biradical in the ideal glycerol/water solvent matrix, ε = 230. EPR and X-ray crystallography are used to characterize the molecule and suggest approaches for further optimizing the biradical distance and relative orientation.

The catalytic condensation of cis-2-butene-1,4-diol with CpRu(MQA)(C(3)H(5)) (Cp = cyclopentadienyl, MQA = 4-methoxyquinoline-2-carboxylate) generates poly(2-butenediol), an unsaturated telechelic polyether diol with molecular weights between 400 and 4600 g/mol. This Ru(IV) allyl catalyst enchains 2-butene-1,4-diol primarily as the linear trans-2-butenyl ether (92%) along with vinyl branches (8%). These telechelic oligomers are useful chain extenders and macromonomers, as demonstrated by their use in the synthesis of poly(lactide)-b-poly(butenediol)-b-poly(lactide) triblock copolymers. Model studies support a proposed mechanism involving the formation of Ru(IV) allyl intermediates from allylic alcohols and chain growth by selective nucleophilic displacement at the terminus of the Ru(IV) allyl to generate trans-2-butenyl ether linkages.

The bicyclic guanidine 1,5,7- triazabicyclo[4.4.0]dec-5-ene (TBD) is an effective organocatalyst for the formation of amides from esters and primary amines. Mechanistic and kinetic investigations support a nucleophilic mechanism where TBD reacts reversibly with esters to generate an acyl-TBD intermediate that acylates amines to generate the amides. Comparative investigations of the analogous bicyclic guanidine 1,4,6-triazabicyclo[3.3.0]oct-4-ene (TBO) reveal it to be a much less active acylation catalyst than TBD. Theoretical and mechanistic studies imply that the higher reactivity of TBD is a consequence of both its higher basicity and nucleophilicity than TBO as well as the high reactivity of the acyl-TBD intermediate, which is sterically prevented from adopting a planar amide structure.

A new family of guanidinium-rich molecular transporters featuring a novel oligocarbonate backbone with 1,7-side chain spacing is described. Conjugates can be rapidly assembled irrespective of length in a one-step oligomerization strategy that can proceed with concomitant introduction of probes (or by analogy drugs). The new transporters exhibit excellent cellular entry as determined by flow cytometry and fluorescence microscopy, and the functionality of their drug delivery capabilities was confirmed by the delivery of the bioluminescent small molecule probe luciferin and turnover by its intracellular target enzyme.

The low temperature complete dehydrohalogenation of pentabromocyclododecene (C12H17Br5) with potassium tert-butoxide in THF followed by exposure to potassium metal leads to the formation of the anion radical of 1,5-di-trans-[12]annulene, which loses hydrogen and undergoes ring closure to form the anion radical of 11,12-dihydro-[8]annuleno-[6]annulene. This product can, in turn, be isolated as its neutral molecule via reoxidation with iodine. A [12]annulene obtained via the dimerization of 1,5-hexadiyne in the presence of 18-crown-6 and potassium tert-butoxide undergoes ring closure, with concomitant loss of hydrogen, to yield the heptalene anion radical. It follows that the heptalene anion radical precursor was the 1,7-di-trans isomer of [12]annulene.

EPR studies in tetrahydrofuran, reveal that the one electron reduction of 1-(9-methyl-9H-fluoren-9-yl)-4-methylbenzene via electron transfer from cesium metal produces an anion radical that has a large affinity for the cesium cation. The affinity of this anion radical for Cs+ is so great that it will actually "suck" the Cs+ (but not Na+ or K+) right out of the grasp of 18-crown-6, leading to a cation-assisted pi-stacked complex, where the s-orbital of the metal cation is simultaneously overlapped with the pi-clouds of the phenyl and fluorenyl moieties. At ambient temperature, proton- and cesium-electron coupling constants are rapidly (on the EPR time scale) modulated as a result of the simultaneous existence of two interconverting conformers having an averaged cesium splitting (a(Cs)) of about 1.6 G. The pi-s-pi-electronic coupling can be turned on or off via the addition or removal of cesium cations. Analogous pi-s-pi-electronic coupling is observed in the 1,4-bis(9-methyl-9H-fluoren-9-yl)benzene-cesium system.

The one-electron reduction of neutral pi-stacked di- and trifluorenes (F-2 and F-3) in HMPA, where ion association is absent, results in the formation of anion radicals in which the odd electron resides predominantly on just one of the external fluorene moieties, as established by EPR spectroscopy. However, in the case of tetrafluorene, introduction of a single electron leads to a kinetically controlled anion radical F-4(int)*- in which the odd electron undergoes rapid exchange between two central fluorene rings, where the anionic charge is partially shielded from solvation due to the presence of external fluorene rings. On a time scale of minutes, anion radical F-4(int)*- converts to a thermodynamically stabilized anion radical F-4(ext)*-, with the electron exhibiting coupling from the protons on an external fluorene moiety. The charge and spin residing on an external moiety allow efficient solvation of the anionic charge. A similar fast exchange of a single electron (probably with the involvement of quantum mechanical tunneling) among three and four internal fluorene moieties is initially observed via EPR spectroscopy in the penta- and hexafluorene derivatives, F-5 and F-6, respectively.

Only one isomer of o-benzyne ([6]annulyne or 1,2-didehydrobenzene) exists, but the dehydro analogue of the "ring-opened double benzene", [12]annulyne, was generated in several isomeric forms. 1,5-Hexadiyne undergoes self-condensation in the presence of potassium tert-butoxide to yield two isomers of [12]annulyne (3,11-di-trans-[12]annulyne and 5,9-di-trans-[12]annulyne), both of which exhibit a weak paratropic ring current in their 1H NMR spectra and are oxygen sensitive. They can be reduced to their respective dianions, which are diatropic. A third isomer (3,9-di-trans-[12]annulyne) was generated via the complete dehydrohalogenation of hexabromocyclododecene and found to be much less stable but can be tamed via one- or two-electron reduction. A tight association of the cation (K+) with the p(y)-orbitals within the alkyne moiety results in an unusually low-field resonance for an adjacent external proton.

[reaction: see text] Reaction of 1,4-dibromo-[8]annulene (C(8)H(6)Br(2)) with potassium tert-butoxide in THF followed by exposure to potassium metal leads to the formation of the anion radical of sym-[8]annuldiyne. The rapid interchange of Jahn-Teller-induced alternating bond angle conformers of sym-[8]annuldiyne is halted by ion association with a metal-crown ether complex forming the cyclooctadienyne-eta(2)-ynyl potassium zwitterionic radical, rendering all four protons nonequivalent. Neutral sym-[8]annuldiyne can form the [2 + 2] polymer, which is not soluble in the THF solution.

EPR studies in hexamethylphosphoramide, along with DFT studies, reveal that the one-electron reduction of pi-stacked polyfluorenes containing two, three, and four fluorene units leads to the corresponding anion radicals where the odd electron is located exclusively on an outside fluorene moiety. These anion radicals disproportionate to form small concentrations of diamagnetic dianions, wherein there is a nonclassical pz overlap that crosses the C2 axis. The presence of the two extra electrons activates the C-H bonds in the ortho positions, and concomitant overlap of the p-orbitals involving adjacent fluorene moieties results in intramolecular hydrogen exchange at temperatures as low as 90 K.

Reacting (at 0 degrees C) a mixture of CH2Cl2 and monobromo[8]annulene (C8H7Br) with potassium tert-butoxide in hexamethylphosphoramide (HMPA) and following with exposure to potassium metal led to the formation of the anion radical of an HMPA-[6.1.0]bicyclononatetraene condensation product, in which two HMPA fragments are geminal and attached to the number 9 carbon. When the reaction sequence is carried out in THF, the dianion of cycloprop[8]annulene is predominantly formed. Neutral cycloprop[8]annulene can be isolated via the I2 oxidation of the THF solution. The NMR analysis reveals that the eight-membered ring is nearly planar, and the three-membered ring is more like a dimethylenecyclopropane than it is like a cyclopropene. Further, the chemical shifts due to the protons on the eight-membered ring are nearly 2 ppm further upfield than are those for [8]annulene itself, suggesting a paratropic ring current.

Room-temperature dehydrohalogenation of bromocyclooctatetraene (BrC8H7) with potassium tert-butoxide followed (after a couple of minutes) by alkali metal reduction was used to generate the anion radical of tri-[8]annulenylene [(C8H6*-)3] in HMPA. EPR analysis reveals that the odd electron is primarily located in one of the three eight-membered ring systems, which is rendered planar. Excellent agreement was obtained between spin densities predicted by B3LYP/6-31G* calculations and those observed. The neutral tri-[8]annulenylene system has a propensity toward polymerization, but it can be isolated for NMR and mass spectral analysis via the I2 oxidation of the anion radical. The NMR analysis reveals that two of the eight-membered rings are bent above the plane of the benzene ring and the other is bent below. Tri-[6]annulenylene (triphenylene) is the only other known member of the triannulenylenes.

The low-temperature (-100 degrees C) dehydrohalogenation of bromocyclooctatetraene followed by immediate electron-transfer yields a stable solution of the [8]annulyne anion radical. If the unstable [8]annulyne is reacted with itself, cyclobutadiene, or benzyne, the respective bi-[8]annulenylene, [6]annuleno[8]annulene, or [6]-[8]annulenylene can be trapped as their anion radicals via one-electron transfer. These condensation products were all obtained from simple [2 + 2] cycloaddition reactions. B3LYP/6-31G geometry optimizations were carried out, and the calculated spin densities were compared to the EPR spectral results obtained for the anion radicals of [6]annuleno[8]annulene, [8]annulyne, bi[8]annulenylene, and [6]-[8]annulenylene, and excellent agreement has been realized. This simple "one-pot" approach should be applicable to a wide range of such systems.

Low-temperature (-120 degrees C) dehydrohalogenation of bromocyclooctatetraene (BrC8H7) with either sodium or potassium tert-butoxide followed by alkali metal reduction was used to generate the anion radical of [8]annulyne (C8H6*-) in tetrahydrofuran. EPR analysis at -120 degrees C reveals an extraordinarily large metal splitting when K or Cs (aK of 0.214 G and aCs of 3.26 G) serves as the reducing agent. The large aM is due to the metal cation interacting with the p-orbitals, within the alkyne moiety, that are in the plane of the ring system. The ionic radius of K+ is 1.33 A, which is larger than the B3LYP predicted distance between carbons 1 and 2 (1.23 A). However, the ionic radius of Na+ is only 0.95 A, and it is too small to simultaneously interact with both p-orbitals. Hence, no aM is observed when Na (ordinarily aNa > aK) or Li serves as the reducing agent. After the addition of 18-crown-6 to either the K or the Cs reduced system, two anion radicals are present. One is the system where the 18-crown-6 encapsulated metal complex is normally ion paired over the face of the ring system and aM = 0. The other is the cyclooctatriene-eta2-ynyl 18-crown-6 encapsulated metal zwitterion radical exhibiting a large aM. The ion pair to organometallic equilibrium constant is 1.6 +/- 0.1 and 3.5 +/- 0.1 for the K and Cs systems, respectively.