Search

Accurate and precise determination of mechanical properties of nanoscale materials is mandatory since device performances of nanoelectromechanical systems (NEMS) are closely related to the flexural properties of the materials. In this study, the intrinsic mechanical properties of highly stressed silicon nitride (SiN) beams of varying lengths are investigated using two different techniques: Dynamic flexural measurement using optical interferometry and quasi-static flexural measurement using atomic force microscopy. The resonance frequencies of the doubly clamped, highly stressed beams are found to be inversely proportional to their length, which is not usually observed from a beam but is expected from a string-like structure. The mass density of the SiN beams can be precisely determined from the dynamic flexural measurements by using the values for internal stress and Young’s modulus determined from the quasi-static measurements. As a result, the mass resolution of the SiN beam resonators was predicted to be a few attograms, which was found to be in excellent agreement with the experimental results. This work suggests that accurate and precise determination of mechanical properties can be achieved through combined flexural measurement techniques, which is a crucial key for designing practical NEMS applications such as biomolecular sensors and gas detectors.

A stencil lithography technique has been developed to fabricate organic-material-based electronic devices with sub-micron resolution. Suspended polymethylmethacrylate (PMMA) membranes were used as shadow masks for defining organic channels and top electrodes. Arrays of pentacene field effect transistors (FETs) with various channel lengths from 50 μm down to 500 nm were successfully produced from the same batch using this technique. Electrical transport measurements showed that the electrical contacts of all devices were stable and the normalized contact resistances were much lower than previously studied organic FETs. Scaling effects, originating from the bulk space charge current, were investigated by analyzing the channel-length-dependent mobility and hysteresis behaviors. This novel lithography method provides a reliable means for studying the fundamental transport properties of organic materials at the nanoscale as well as enabling potential applications requiring the fabrication of integrated organic nanoelectronic devices.

A transistor structure composed of an individual single-walled carbon nanotube (SWNT) channel with a graphene electrode was demonstrated. The integrated arrays of transistor devices were prepared by transferring patterned graphene electrode patterns on top of the aligned SWNT along one direction. Both single and multi layer graphene were used for the electrode materials; typical p-type transistor and Schottky diode behavior were observed, respectively. Based on our fabrication method and device performances, several issues are suggested and discussed to improve the device reliability and finally to realize all carbon based future electronic systems.