Search

We perform one-dimensional linear analysis and numerical simulations of the propagation of Alfven waves in a force-free magnetosphere along magnetic field lines around a spinning black hole. We use the results to investigate the dynamic process of wave propagation and energy transport for Alfven waves. As in a previous study using the Banados--Teitelboim--Zanelli spacetime (Koide et al. 2022), the Alfven wave induces a fast magnetosonic wave in the case of a spinning black hole. Energy conservation is confirmed when this additional induced magnetosonic wave is considered. We also observe the reflection of the inwardly propagating Alfven wave around the static limit, which is prohibited in theory when using the eikonal approximation., Comment: 43 pages, 11 figures, accepted in the Astrophysical Journal

Modeling of polymer oxidative aging has been actively studied since the 1990s. Insights from these studies suggest that the transport of oxygen and radicals significantly influences aging heterogeneity, alongside chemical reaction kinetics. A recent simulation study [Ishida et al., Macromolecules, 56(21), 8474-8483, 2023] demonstrated that mesoscale heterogeneity arises when the H-abstraction reaction occurs faster than the relaxation times of polymer chains. In this study, the simulations were extended by modeling the rate of oxygen addition to polymer radicals (k_2) to reflect the effects of the O2 concentration. Three key aspects of oxidative aging behavior were found to be influenced by the O2 addition rate: (i) reaction kinetics, (ii) the degree of heterogeneity, and (iii) amount of crosslinking. Namely, reducing O2 concentration slows the conversion of polymer radicals into H-abstractable peroxyl radicals. This deceleration delays H-abstraction reactions, increases the number of polymer radicals, and promotes crosslinking reactions between two polymer radicals., Comment: 21 pages, 9 figures

In this paper, we apply covariant affine integral quantization to study motion in the 2D punctured plane. The associated four-dimensional phase space is identified with the similitude group SIM(2), representing transformations of the plane composed of translations, rotations, and dilations. Near the punctured point, we observe that the topology influencing quantum fluctuations gives rise to an affine vector potential, which can be interpreted as the Aharonov-Bohm (AB) gauge potential generated by an infinite coil. This finding suggests that the AB effect originates from the topology enforced by the impenetrable coil, rather than from a classical gauge potential. Our results offer a novel perspective on the AB effect, emphasizing the fundamental role of topology in quantum mechanics., Comment: 20 pages

Constructing datasets representative of the target domain is essential for training effective machine learning models. Active learning (AL) is a promising method that iteratively extends training data to enhance model performance while minimizing data acquisition costs. However, current AL workflows often require human intervention and lack parallelism, leading to inefficiencies and underutilization of modern computational resources. In this work, we introduce PAL, an automated, modular, and parallel active learning library that integrates AL tasks and manages their execution and communication on shared- and distributed-memory systems using the Message Passing Interface (MPI). PAL provides users with the flexibility to design and customize all components of their active learning scenarios, including machine learning models with uncertainty estimation, oracles for ground truth labeling, and strategies for exploring the target space. We demonstrate that PAL significantly reduces computational overhead and improves scalability, achieving substantial speed-ups through asynchronous parallelization on CPU and GPU hardware. Applications of PAL to several real-world scenarios - including ground-state reactions in biomolecular systems, excited-state dynamics of molecules, simulations of inorganic clusters, and thermo-fluid dynamics - illustrate its effectiveness in accelerating the development of machine learning models. Our results show that PAL enables efficient utilization of high-performance computing resources in active learning workflows, fostering advancements in scientific research and engineering applications., Comment: 25 pages, 4 figures, and 1 table (references and SI included)

In this study, we explore a form of quantum circuit complexity that extends to open systems. To illustrate our methodology, we focus on a basic model where the projective Hilbert space of states is depicted by the set of orientations in the Euclidean plane. Specifically, we investigate the dynamics of mixed quantum states as they undergo interactions with a sequence of gates. Our approach involves the analysis of sequences of real $2\times2$ density matrices. This mathematical model is physically exemplified by the Stokes density matrices, which delineate the linear polarisation of a quasi-monochromatic light beam, and the gates, which are viewed as quantum polarisers, whose states are also real $2\times2$ density matrices. The interaction between polariser-linearly polarised light is construed within the context of this quantum formalism. Each density matrix for the light evolves in an approach analogous to a Gorini-Kossakowski-Lindblad-Sudarshan (GKLS) process during the time interval between consecutive gates. Notably, when considering an upper limit for the cost function or tolerance or accuracy, we unearth that the optimal number of gates follows a power-law relationship.

In cybersecurity, allow lists play a crucial role in distinguishing safe websites from potential threats. Conventional methods for compiling allow lists, focusing heavily on website popularity, often overlook infrequently visited legitimate domains. This paper introduces DomainHarvester, a system aimed at generating allow lists that include trustworthy yet infrequently visited domains. By adopting an innovative bottom-up methodology that leverages the web's hyperlink structure, DomainHarvester identifies legitimate yet underrepresented domains. The system uses seed URLs to gather domain names, employing machine learning with a Transformer-based approach to assess their trustworthiness. DomainHarvester has developed two distinct allow lists: one with a global focus and another emphasizing local relevance. Compared to six existing top lists, DomainHarvester's allow lists show minimal overlaps, 4\% globally and 0.1\% locally, while significantly reducing the risk of including malicious domains, thereby enhancing security. The contributions of this research are substantial, illuminating the overlooked aspect of trustworthy yet underrepresented domains and introducing DomainHarvester, a system that goes beyond traditional popularity-based metrics. Our methodology enhances the inclusivity and precision of allow lists, offering significant advantages to users and businesses worldwide, especially in non-English speaking regions., Comment: Accepted for publication at IEEE CCNC 2025

The persistent threat posed by malicious domain names in cyber-attacks underscores the urgent need for effective detection mechanisms. Traditional machine learning methods, while capable of identifying such domains, often suffer from high false positive and false negative rates due to their extensive reliance on historical data. Conventional approaches often overlook the dynamic nature of domain names, the purposes and ownership of which may evolve, potentially rendering risk assessments outdated or irrelevant. To address these shortcomings, we introduce DomainDynamics, a novel system designed to predict domain name risks by considering their lifecycle stages. DomainDynamics constructs a timeline for each domain, evaluating the characteristics of each domain at various points in time to make informed, temporal risk determinations. In an evaluation experiment involving over 85,000 actual malicious domains from malware and phishing incidents, DomainDynamics demonstrated a significant improvement in detection rates, achieving an 82.58\% detection rate with a low false positive rate of 0.41\%. This performance surpasses that of previous studies and commercial services, improving detection capability substantially., Comment: Accepted for publication at IEEE CCNC 2025

Domain squatting poses a significant threat to Internet security, with attackers employing increasingly sophisticated techniques. This study introduces DomainLynx, an innovative compound AI system leveraging Large Language Models (LLMs) for enhanced domain squatting detection. Unlike existing methods focusing on predefined patterns for top-ranked domains, DomainLynx excels in identifying novel squatting techniques and protecting less prominent brands. The system's architecture integrates advanced data processing, intelligent domain pairing, and LLM-powered threat assessment. Crucially, DomainLynx incorporates specialized components that mitigate LLM hallucinations, ensuring reliable and context-aware detection. This approach enables efficient analysis of vast security data from diverse sources, including Certificate Transparency logs, Passive DNS records, and zone files. Evaluated on a curated dataset of 1,649 squatting domains, DomainLynx achieved 94.7\% accuracy using Llama-3-70B. In a month-long real-world test, it detected 34,359 squatting domains from 2.09 million new domains, outperforming baseline methods by 2.5 times. This research advances Internet security by providing a versatile, accurate, and adaptable tool for combating evolving domain squatting threats. DomainLynx's approach paves the way for more robust, AI-driven cybersecurity solutions, enhancing protection for a broader range of online entities and contributing to a safer digital ecosystem., Comment: Accepted for publication at IEEE CCNC 2025

We study the decidability and complexity of non-cooperative rational synthesis problem (abbreviated as NCRSP) for some classes of probabilistic strategies. We show that NCRSP for stationary strategies and Muller objectives is in 3-EXPTIME, and if we restrict the strategies of environment players to be positional, NCRSP becomes NEXPSPACE solvable. On the other hand, NCRSP_>, which is a variant of NCRSP, is shown to be undecidable even for pure finite-state strategies and terminal reachability objectives. Finally, we show that NCRSP becomes EXPTIME solvable if we restrict the memory of a strategy to be the most recently visited t vertices where t is linear in the size of the game.

Based on a recent simulation study [Masubuchi et al., Macromolecules, 56, 9359 (2023)], the cycle rank plays a significant role in determining the fracture characteristics of network polymers. However, the study only considered energy-minimized networks without the effects of thermal agitation. We conducted Brownian dynamics simulations at various stretch rates to address this gap. The results showed that even with Brownian motion, the strain and stress at the break obtained for different node functionalities and conversion ratios exhibited master curves if plotted against cycle rank. These master curves were dependent on the strain rate, with the curves tending to approach those observed in energy-minimized simulations as the strain rate decreased, even though the fracture process was affected by the competition against Brownian motion, elongation, and bond degradation., Comment: 12 pages, 4 figures

Although the reverse non-equilibrium molecular dynamics (RNEMD) simulation method has been widely employed, the range of applicability is yet to be discussed. In this study, for the first time, we systematically examine the method against an unentangled melt of the Kremer-Grest type chain. The simulation results indicate that as the shear rate increases, the temperature and density become inhomogeneous. However, the average viscosity remains consistent with the results obtained using the SLLOD method under homogeneous temperature and density. We also confirm that the temperature-density inhomogeneity does not significantly affect polymer conformation.

This article presents GLIM, a 3D range-inertial localization and mapping framework with GPU-accelerated scan matching factors. The odometry estimation module of GLIM employs a combination of fixed-lag smoothing and keyframe-based point cloud matching that makes it possible to deal with a few seconds of completely degenerated range data while efficiently reducing trajectory estimation drift. It also incorporates multi-camera visual feature constraints in a tightly coupled way to further improve the stability and accuracy. The global trajectory optimization module directly minimizes the registration errors between submaps over the entire map. This approach enables us to accurately constrain the relative pose between submaps with a small overlap. Although both the odometry estimation and global trajectory optimization algorithms require much more computation than existing methods, we show that they can be run in real-time due to the careful design of the registration error evaluation algorithm and the entire system to fully leverage GPU parallel processing., Comment: Robotics and Autonomous Systems

Environments lacking geometric features (e.g., tunnels and long straight corridors) are challenging for LiDAR-based odometry algorithms because LiDAR point clouds degenerate in such environments. For wheeled robots, a wheel kinematic model (i.e., wheel odometry) can improve the reliability of the odometry estimation. However, the kinematic model suffers from complex motions (e.g., wheel slippage, lateral movement) in the case of skid-steering robots particularly because this robot model rotates by skidding its wheels. Furthermore, these errors change nonlinearly when the wheel slippage is large (e.g., drifting) and are subject to terrain-dependent parameters. To simultaneously tackle point cloud degeneration and the kinematic model errors, we developed a LiDAR-IMU-wheel odometry algorithm incorporating online training of a neural network that learns the kinematic model of wheeled robots with nonlinearity. We propose to train the neural network online on a factor graph along with robot states, allowing the learning-based kinematic model to adapt to the current terrain condition. The proposed method jointly solves online training of the neural network and LiDARIMUwheel odometry on a unified factor graph to retain the consistency of all those constraints. Through experiments, we first verified that the proposed network adapted to a changing environment, resulting in an accurate odometry estimation across different environments. We then confirmed that the proposed odometry estimation algorithm was robust against point cloud degeneration and nonlinearity (e.g., large wheel slippage by drifting) of the kinematic model., Comment: https://youtu.be/CvRVhdda7Cw

The ultimate goal of this paper is to develop a systematic method for deriving quantum master equations that satisfy the requirements of a completely positive and trace-preserving (CPTP) map, further describing thermal relaxation processes. In this paper, we assume that the quantum master equation is obtained through the canonical quantization of the generalized Brownian motion proposed in our recent paper [T. Koide and F. Nicacio, Phys. Lett. A 494, 129277 (2024)]. At least classically, this dynamics describes the thermal relaxation process regardless of the choice of the system Hamiltonian. The remaining task is to identify the parameters ensuring that the quantum master equation meets complete positivity. We limit our discussion to many-body quadratic Hamiltonians and establish a CPTP criterion for our quantum master equation. This criterion is useful for applying our quantum master equation to models with interaction such as a network model, which has been used to investigate how quantum effects modify heat conduction., Comment: 9 pages, 1 figure

Despite many attempts, the relation between fracture and structure of polymer networks is yet to be clarified. For this problem, a recent study for phantom chain simulations [Macromolecules, 56, 9359 (2023)] has demonstrated that the fracture characteristics obtained for polymer networks with various node functionalities and conversion ratios lie on master curves if they are plotted against cycle rank. In this study, we extended the simulation to the effect of prepolymer concentration on the relationships between cycle rank and fracture characteristics within the concentration range of 1

In recommender systems, the presentation of explanations plays a crucial role in supporting users' decision-making processes. Although numerous existing studies have focused on the effects (transparency or persuasiveness) of explanation content, explanation expression is largely overlooked. Tone, such as formal and humorous, is directly linked to expressiveness and is an important element in human communication. However, studies on the impact of tone on explanations within the context of recommender systems are insufficient. Therefore, this study investigates the effect of explanation tones through an online user study from three aspects: perceived effects, domain differences, and user attributes. We create a dataset using a large language model to generate fictional items and explanations with various tones in the domain of movies, hotels, and home products. Collected data analysis reveals different perceived effects of tones depending on the domains. Moreover, user attributes such as age and personality traits are found to influence the impact of tone. This research underscores the critical role of tones in explanations within recommender systems, suggesting that attention to tone can enhance user experience.

This paper presents a 6-DoF range-based Monte Carlo localization method with a GPU-accelerated Stein particle filter. To update a massive amount of particles, we propose a Gauss-Newton-based Stein variational gradient descent (SVGD) with iterative neighbor particle search. This method uses SVGD to collectively update particle states with gradient and neighborhood information, which provides efficient particle sampling. For an efficient neighbor particle search, it uses locality sensitive hashing and iteratively updates the neighbor list of each particle over time. The neighbor list is then used to propagate the posterior probabilities of particles over the neighbor particle graph. The proposed method is capable of evaluating one million particles in real-time on a single GPU and enables robust pose initialization and re-localization without an initial pose estimate. In experiments, the proposed method showed an extreme robustness to complete sensor occlusion (i.e., kidnapping), and enabled pinpoint sensor localization without any prior information., Comment: IEEE International Conference on Robotics and Automation (ICRA2024)

Tunnels and long corridors are challenging environments for mobile robots because a LiDAR point cloud should degenerate in these environments. To tackle point cloud degeneration, this study presents a tightly-coupled LiDAR-IMU-wheel odometry algorithm with an online calibration for skid-steering robots. We propose a full linear wheel odometry factor, which not only serves as a motion constraint but also performs the online calibration of kinematic models for skid-steering robots. Despite the dynamically changing kinematic model (e.g., wheel radii changes caused by tire pressures) and terrain conditions, our method can address the model error via online calibration. Moreover, our method enables an accurate localization in cases of degenerated environments, such as long and straight corridors, by calibration while the LiDAR-IMU fusion sufficiently operates. Furthermore, we estimate the uncertainty (i.e., covariance matrix) of the wheel odometry online for creating a reasonable constraint. The proposed method is validated through three experiments. The first indoor experiment shows that the proposed method is robust in severe degeneracy cases (long corridors) and changes in the wheel radii. The second outdoor experiment demonstrates that our method accurately estimates the sensor trajectory despite being in rough outdoor terrain owing to online uncertainty estimation of wheel odometry. The third experiment shows the proposed online calibration enables robust odometry estimation in changing terrains., Comment: Accepted by IEEE Access journal (12 September) open-source: https://github.com/TakuOkawara/full_linear_wheel_odometry_factor

Domain incremental learning (DIL) has been discussed in previous studies on deep neural network models for classification. In DIL, we assume that samples on new domains are observed over time. The models must classify inputs on all domains. In practice, however, we may encounter a situation where we need to perform DIL under the constraint that the samples on the new domain are observed only infrequently. Therefore, in this study, we consider the extreme case where we have only one sample from the new domain, which we call one-shot DIL. We first empirically show that existing DIL methods do not work well in one-shot DIL. We have analyzed the reason for this failure through various investigations. According to our analysis, we clarify that the difficulty of one-shot DIL is caused by the statistics in the batch normalization layers. Therefore, we propose a technique regarding these statistics and demonstrate the effectiveness of our technique through experiments on open datasets., Comment: accepted at IEEE International Joint Conference on Neural Networks (IJCNN) 2024

The proliferation of phishing sites and emails poses significant challenges to existing cybersecurity efforts. Despite advances in malicious email filters and email security protocols, problems with oversight and false positives persist. Users often struggle to understand why emails are flagged as potentially fraudulent, risking the possibility of missing important communications or mistakenly trusting deceptive phishing emails. This study introduces ChatSpamDetector, a system that uses large language models (LLMs) to detect phishing emails. By converting email data into a prompt suitable for LLM analysis, the system provides a highly accurate determination of whether an email is phishing or not. Importantly, it offers detailed reasoning for its phishing determinations, assisting users in making informed decisions about how to handle suspicious emails. We conducted an evaluation using a comprehensive phishing email dataset and compared our system to several LLMs and baseline systems. We confirmed that our system using GPT-4 has superior detection capabilities with an accuracy of 99.70%. Advanced contextual interpretation by LLMs enables the identification of various phishing tactics and impersonations, making them a potentially powerful tool in the fight against email-based phishing threats., Comment: Accepted at SecureComm 2024

This paper presents a range inertial localization algorithm for a 3D prior map. The proposed algorithm tightly couples scan-to-scan and scan-to-map point cloud registration factors along with IMU factors on a sliding window factor graph. The tight coupling of the scan-to-scan and scan-to-map registration factors enables a smooth fusion of sensor ego-motion estimation and map-based trajectory correction that results in robust tracking of the sensor pose under severe point cloud degeneration and defective regions in a map. We also propose an initial sensor state estimation algorithm that robustly estimates the gravity direction and IMU state and helps perform global localization in 3- or 4-DoF for system initialization without prior position information. Experimental results show that the proposed method outperforms existing state-of-the-art methods in extremely severe situations where the point cloud data becomes degenerate, there are momentary sensor interruptions, or the sensor moves along the map boundary or into unmapped regions., Comment: IEEE International Conference on Robotics and Automation (ICRA2024)