Search

Four years (2014-2017) of observations of depolarization Raman Lidar systems of four EARLINET (European Aerosol research Lidar Network) stations [from West to East: Granada (Spain), Potenza (Italy), Athens (Greece) and Limassol (Cyprus)] were collected and used to a statistical analysis of Saharan dust events over Mediterranean basin. In this study, emphasis is given to the consistency of the particle linear depolarization ratio (δp532), the extinction-to-backscatter ratio mentioned as Lidar Ratio (LR532) and the Aerosol Optical Thickness (AOT532) within the observed Saharan dust layers, corresponding to the visible range (532 nm). Geometrical properties and clusters of aerosol mixtures are also presented. Our clustering was based on previous classification by airborne High Spectral Resolution Lidar (HSRL) observations and was further supported by backward trajectory analysis. We found mean δp532 values of 0.24±0.05, 0.26±0.06, 0.28±0.05 and 0.28±0.04, mean LR532 values of 52±8 sr, 51±9 sr, 52±9 sr and 49±6 sr, mean AOT532 values of 0.40±0.31, 0.11±0.07, 0.12±0.10 and 0.32±0.17 and mean layer thicknesses of 3392±1458 m, 2150±1082 m, 1872±816 m and 1716±567 m for Granada, Potenza, Athens and Limassol respectively. This work could assist in bridging the existing gaps related to the extensive and intensive dust aerosol properties over the Mediterranean and enriching the bibliography about mixed aerosol layers from different sources (e.g. dust and biomass burning (BB) aerosols, dust and urban/ industrial aerosols).

Aerosol absorption profiling is crucial for radiative transfer calculations and climate modelling. Here, we utilize the synergy of lidar with sun-photometer measurements to derive the absorption coefficient and single scattering albedo profiles during the ACTRIS-2 campaigns held in Germany, Greece and Cyprus. The remote sensing techniques are compared with in situ measurements in order to harmonize and validate the different methodologies and reduce the absorption profiling uncertainties.

By means of available ice nucleating particle (INP) parameterization schemes we compute profiles of dust INP number concentration utilizing Polly-XT and CALIPSO lidar observations during the INUIT-BACCHUS-ACTRIS 2016 campaign. The polarization-lidar photometer networking (POLIPHON) method is used to separate dust and non-dust aerosol backscatter, extinction, mass concentration, particle number concentration (for particles with radius > 250 nm) and surface area concentration. The INP final products are compared with aerosol samples collected from unmanned aircraft systems (UAS) and analyzed using the ice nucleus counter FRIDGE.

In this paper we studied the temporal evolution of the Planetary Boundary Layer height (PBLH) over the basin of Athens, Greece during a 5-year period (2011-2016) using data from the EOLE Raman lidar system. The lidar data (range-corrected lidar signals-RCS) were selected around 12:00 UTC and 00:00 UTC for a total of 332 cases: 165 days and 167 nights. Extended Kalman filtering techniques were used for the determination of the PBLH. Moreover, several well established techniques for the PBLH estimation based on lidar data were also tested for a total of 35 cases. Comparisons with the PBLH values derived from radiosonde data were also performed. The mean PBLH over Athens was found to be of the order of 1617±324 m at 12:00 UTC and of 892±130 m at 00:00 UTC, for the period examined. The mean PBLH growth rate was found to be about 170±64 m h-1 and 90±17 m h-1, during daytime and nighttime, respectively.

The EOLE multi-wavelength aerosol Ramandepolarization lidar, and the AIAS depolarization lidar, in synergy with a sun photometer (CIMEL), were used, in the period 2007-2016, to provide the vertical profiles of the aerosol optical properties over Athens, Greece. More than 30 biomass burning events (fresh and aged smoke particles) were observed, with smoke layers between 1.5 up to 4-5 km height, while their duration ranged from 1-3 days. Lidar ratio (LR) values ranged from 40-105 sr (at 355 nm) and from 40-100 sr (at 532 nm), while the linear particle depolarization ratio (LPDR) at both 355 and 532 nm, remained

Several studies are conducted to explain the correlation existing between theory and practice, as observed in the organization studies. The article also presents a new explanation and a new perspective for the theoritization of engaged practice.

Remote sensing measurements of aerosols using depolarization Raman Lidar systems from 4 EARLINET (European Aerosol research Lidar Network) stations are used for a comprehensive analysis of Saharan dust events over the Mediterranean basin in the period 2014-2017. In this period, we selected to study 51 dust events regarding the geometrical, optical and microphysical properties of dust particles, classifying them and assessing their radiative forcing effect on the atmosphere. From West to East, the stations of Granada, Potenza, Athens and Limassol were selected as representative Mediterranean cities regularly affected by Saharan dust intrusions. Emphasis was given on lidar measurements in the visible (532 nm) and specifically on the consistency of the particle linear depolarization ratio (dp532), the extinction-to-backscatter lidar ratio (LR532) and the Aerosol Optical Thickness (AOT532) within the observed dust layers. We found mean dp532 values of 0.24 ± 0.05, 0.26 ± 0.06, 0.28 ± 0.05 and 0.28 ± 0.04, mean LR532 values of 52 ± 8 sr, 51 ± 9 sr, 52 ± 9 sr and 49 ± 6 sr, and mean AOT532 values of 0.40 ± 0.31, 0.11 ± 0.07, 0.12 ± 0.10 and 0.32 ± 0.17, for Granada, Potenza, Athens and Limassol, respectively. The mean layer thickness values were found to range from ~1700 to ~3400 m. Additionally, based also on a previous aerosol type classification scheme provided by airborne High Spectral Resolution Lidar (HSRL) observations and on air mass backward trajectory analysis, a clustering analysis was performed in order to identify the major mixing aerosol types over the studied area. Furthermore, a synergy of lidar measurements and modeling was used to deeply analyze the solar and thermal radiative forcing of airborne dust. In total, a cooling behavior in the solar range and a significantly lower heating behavior in the thermal range was estimated. Depending on the dust optical and geometrical properties, the load intensity and the solar zenith angle (SZA), the estimated solar radiative forcing values range from -59 to -22 W m-2 at the surface and from -24 to -1 W m-2 at the top of the atmosphere (TOA). Similarly, in the thermal spectral range these values range from +2 to +4 W m-2 for the surface and from +1 to +3 W m-2 for the TOA. Finally, the radiative forcing seems to be inversely proportional to the dust mixing ratio, since higher absolute values are estimated for less mixed dust layers. [ABSTRACT FROM AUTHOR]

We present an automatic aerosol classification method based solely on European Aerosol Research Lidar Network (EARLINET) intensive optical parameters with the aim of building a network-wide classification tool that could provide near-real-time aerosol typing information. The presented method depends on a supervised learning technique and makes use of the Mahalanobis distance function that relates each un-classified measurement to a pre-defined aerosol type. As a first step (training phase), a reference dataset is set up consisting of already classified EARLINET data. Using this dataset, we defined eight aerosol classes: clean continental, polluted continental, dust, mixed dust, polluted dust, mixed marine, smoke, and volcanic ash. The effect of the number of aerosol classes has been explored, as well as the optimal set of intensive parameters to separate different aerosol types. Furthermore, the algorithm is trained with literature particle linear depolarization ratio values. As a second step (testing phase), we apply the method to an already classified EARLINET dataset and analyse the results of the comparison to this classified dataset. The predictive accuracy of the automatic classification varies between 59 % (minimum) and 90 % (maximum) from 8 to 4 aerosol classes, respectively, when evaluated against pre-classified EARLINET lidar. This indicates the potential use of the automatic classification to all network lidar data. Furthermore, the training of the algorithm with particle linear depolarization values found in literature further improves the accuracy: the accuracy range is 69–93 % from 8 (69 %) to 4 (93 %) aerosol classes, respectively. Additionally, the algorithm has proven to be highly versatile as it adapts to changes in the size of the training dataset and the number of aerosol classes and classifying parameters. Finally, the low computational time and demand for resources make the algorithm extremely suitable for the implementation within the Single Calculus Chain (SCC), the EARLINET centralised processing suite. [ABSTRACT FROM AUTHOR]

In-situ measurements using Unmanned Aerial Vehicles (UAVs) and remote sensing observations can independently provide dense vertically-resolved measurements of atmospheric aerosols; information which is highly required in climate models. In both cases, inverting the recorded signals to useful information requires assumptions and constraints, and this can make the comparison of the results difficult. Here we compare, for the first time, vertical profiles of the aerosol mass concentration derived from Light Detection And Ranging (lidar) observations and in-situ measurements using an Optical Particle Counter (OPC) onboard a UAV during moderate and weak Saharan dust episodes. Agreement between the two measurement methods was within experimental uncertainty for the coarse-mode (i.e., particles having radii > 0.5 µm) where the properties of dust particles can be assumed with good accuracy. This result proves that the two techniques can be used interchangeably for determining the vertical profiles of the aerosol concentrations, bringing them a step closer towards their systematic exploitation in climate models. [ABSTRACT FROM AUTHOR]

The mathematical formulation for the optical setup of a typical EARLINET lidar system is given here. The equations describing a lidar system from the emitted laser beam to its projection on the final receiving unit are revealed, based on paraxial approximation and geometric optics approach. The evaluation of the formulation is performed with ray tracing simulations, revealing an overall good performance with relative differences of the order of 5% mainly attributed to aberrations that are not taken into account in paraxial approximation. [ABSTRACT FROM AUTHOR]

This paper aims to quantify the improvement obtained with a purely rotational Raman (PRR) channel over a vibro-rotational Raman (VRR) channel, used in an aerosol lidar with elastic and Raman channels, in terms of signal-to-noise ratio (SNR), effective vertical resolution, and absolute and relative uncertainties associated to the retrieved aerosol optical (extinction and backscatter) coefficients. Measurements were made with the European Aerosol Research Lidar Network/Universitat Politècnica de Catalunya (EARLINET/UPC) multi-wavelength lidar system enabling a PRR channel at 353.9 nm, together with an already existing VRR (386.7 nm) and an elastic (354.7 nm) channels. Inversions were performed with the EARLINET Single Calculus Chain (SCC). When using PRR instead of VRR, the measurements show a gain in SNR of a factor 2.8 and about 7.6 for 3-h nighttime and daytime measurements, respectively. For 3-h nighttime (daytime) measurements the effective vertical resolution is reduced by 17% (20%), the absolute uncertainty (associated to the extinction) is divided by 2 (10) and the relative uncertainty is divided by 3 (7). During daytime, VRR extinction coefficient is retrieved in a limited height range (<2.2 km) preventing the SCC from finding a suitable calibration range in the search height range. So the advantage of using PRR instead of VRR is particularly evidenced in daytime conditions. For nighttime measurements, decreasing the time resolution from 3 to 1 h has nearly no effect on the relative performances of PRR vs. VRR. [ABSTRACT FROM AUTHOR]

The article presents a case study of a 16-year-old girl presented with episodes of nausea, dizziness, and vomiting. Topics discussed include diagnosis of intracranial epidermoid tumors of the fourth ventricle; revealing mass lying within the fourth ventricle in magnetic resonance imaging; and surgical management of posterior fossa epidermoid tumors.